Error while inserting into MS-SQL Server from Oracle using HS

Hi,
I am using hetrogeneous connection.
I want to insert into MS-SQL Server Table by selecting from Oracle Tables.
insert into tableone@mssql select * from table2;
Table2 is in oracle database.
while executing i'm getting
ORA-02025: all tables in the SQL statement must be at the remote database
Please guide me.
Regards
Salih KM

some guy come up a solution by himself before. go ahead and try it
ORA-02025 error while insert into emp@custard select ....

Similar Messages

Error while inserting data in SQL Server.

Hi',
I am using SOA 11.1.1.5
I am inserting data using DB adapter in MS SQL Server. Some times I get below error.
Error Message: {http://schemas.oracle.com/bpel/extension}bindingFault
Fault ID rrr/xxx!1.1*soa_313bd437-7bb9-41c6-a719-d1775b9afc4b/xx/4115908-BpInv0-BpSeq1.6-4
Fault Time Dec 24, 2012 8:02:09 AM
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: [InsertIntoStagingxx.Stagingxx]. Caused by java.sql.BatchUpdateException: String or binary data would be truncated.. Please see the logs for the full DBAdapter logging output prior to this exception. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-8152" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>String or binary data would be truncated.</detail></part><part name="code"><code>8152</code></part></bindingFault></bpelFault>
Please advice.
Thanks
Yatan

Hi Yatan,
This should be due to data issues. And the error message is due to data truncation issues.
Please check your payload that you are trying to insert into the SQL server table.
One or more fields might have a data that is exceeding its defined length with respect to the table definitions.
Problem with using SQL server is that while inserting, you will not be pointed towards which field or column is causing the error.
You have to take the pain of searching through the entire payload to find the problem causing ones.
Thanks,
Deepak.

How to connect to a Sql server from Oracle using db link

Hi All,
Does anybody have any idea about how to connect to a sql server from oracle database using db link to syncronize the data? I need to pull the data from Sql server table to Oracle tables and relay messages back to the sql server.
Thank you,
Praveen.

we have 2 products - DG4MSQL and DG4ODBC.
DG4ODBC is for free and requires a 3rd party ODBC driver and it can connect to any 3rd party database as long as you use a suitable ODBC driver
DG4MSQL is more powerfull as it is designed for MS SQL Server databases and it supports many functions it can directly map to SQL Server equivalents - it can also call remote procedures or participtae in distributed transactions. Please be aware DG4MSQL requires a license - it is not for free.
Check out Metalink and you'll find notes how to configure both products.
For a generic overview:
Note.233876.1 Options for Connecting to Foreign Data Stores and Non-Oracle Databases
And the setup notes:
DG4ODBC
Note.561033.1 How to Setup DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX) :
Note.466225.1 How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit RDBMS.HS-3-2 :
Note.109730.1 How to setup generic connectivity (HSODBC) for 32 bit Windows (Windows NT, Windows 2000, Windows XP, Windows 2003) V817:
Note.466228.1 How to Setup DG4ODBC on Linux x86 32bit
DG4MSQL
Note.466267.1 How to Setup DG4MSQL (Database Gateway for MS SQL Server) on Windows 32bit
Note.562509.1 How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) 64bit Unix OS (Linux, Solaris, AIX,HP-UX)
Note.437374.1 How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) Release 11 on Linux

Accessing SQL Server from ORACLE using Transparent Gateway

So I had downloaded the gateway installer and was following the guide here to set up the Transparent Gateway for SQL Server: http://www.orafusion.com/art_orahs.htm
After I had created the database link, I was prompted the following error when trying to do a simple select statement from the SQL Server DB:
>
ORA-12154: TNS:could not resolve service name
12154. 00000 - "TNS:could not resolve the connect identifier specified"
*Cause:    A connection to a database or other service was requested using
a connect identifier, and the connect identifier specified could not
be resolved into a connect descriptor using one of the naming methods
configured. For example, if the type of connect identifier used was a
net service name then the net service name could not be found in a
naming method repository, or the repository could not be
located or reached.
*Action:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the
NAMES.DIRECTORY_PATH parameter in the Oracle Net profile
(SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper
directory and is accessible.
- Check that the net service name used as the connect identifier
exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA
file. Look for unmatched parentheses or stray characters. Errors
in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the
NAMES.DIRETORY_PATH parameter in the Oracle Net profile
(SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is
accessible.
- Verify that the net service name or database name used as the
connect identifier is configured in the directory.
- Verify that the default context being used is correct by
specifying a fully qualified net service name or a full LDAP DN
as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the
NAMES.DIRETORY_PATH parameter in the Oracle Net profile
(SQLNET.ORA).
- Make sure the host, port and service name specified
are correct.
- Try enclosing the connect identifier in quote marks.
Error at Line: 3 Column: 27
>
Here are my configuration files:
initMSQL.ora
>
HS_FDS_CONNECT_INFO=webdatasvr:1433.InfoWeb
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
>
listener.ora
>
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC=
(GLOBAL_DBNAME=UGCMAC)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME=UGCMAC)
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = MSQL)
(ORACLE_HOME = C:\oracle\product\11.2.0\tg_1)
(PROGRAM = dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS LIST=
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1524))
>
tnsname.ora
>
UGCMAC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = UGCMAC)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MSQL=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1524))
(CONNECT_DATA =
(SID = MSQL)
(HS=OK)
>
Can anyone assist me? thanks!

Hi kgronau,
>
After changing a listener.ora file you need to STOP and START the listener to get the changes loaded. It looks like your listener is not serving the 1524 port which could be related to the fact that you didn't stop/start the listener after you've edited the listener.ora file.
... But as stated earlier - please do not use a 10.2 listener to start an 11g gateway. Instead configure the listener of the gateway home.
>
I did restart my listener under services.msc whenever I make the changes but there are no effect. Please also note that I can only find "OracleOraDb10g_home1TNSListener" under my services.msc. There is no 11.2 Listener. I did install the gateway and the installation was successful as far as I can tell. But perhaps because there's no 11.2 Listerner under my services.msc, could that mean it was a bad installation?
>
Next point is the tnsping you've used is 11.2. You need to make sure that you use the tnsping of the Oracle Database home as the database initiates the gateway connection so the database home tnsnames,ora needs the tns entry for the gateway.
>
My current PATH environment variables setting is as follow: C:\oracle\product\11.2.0\tg_1\bin;C:\oracle\product\10.2.0\db_1\bin; So perhaps, I just need to ensure the 10.2 ORACE home is the first?
>
As a final tip: There are so many web sites explaining how to configure DG4ODBC - many of them are faulty. If you need a reliable configuration, please have a look at "My Oracle Support" => How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit to Connect to Non-Oracle Databases Post Install     [Document 466225.1]     )
>
Is there a link?
Edited by: omnri on 21-Jul-2011 23:59

Connecting ms sql server from oracle using db link

Hi,
Source : Oracle 11g on linux
destination : ms sql server 2005
i need to create the db link from oracle to ms sql server to view the tables , is it posibble without configuring the gateways( as looks like it is licenced product)
Please let me know any alternative to achive this
Thanks
PGR

There are 2 gateway - the commercial Database Gateway for Ms SQl Server which requires a license and the Database Gateway for ODBC which is for free. The license for DG4ODBC is included in your database license. You only need to install a suitable ODBC driver on your Linux box (for example use the MS SQl Server ODBC driver for Linux - details can be found here: http://www.microsoft.com/en-gb/download/details.aspx?id=36437 ). and then configure the gateway using the My Oracle Support Note:
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install
[Article ID 561033.1]
- Klaus

BAM Deployment error - Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. --- Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "ServerName".

HI,
I am getting below error while deploying BAM activity ...Pls help me resolve this issue.
Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. ---> Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server
"ServerName". ---> System.Data.SqlClient.SqlException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or
[] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed.
Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias
to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An
object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column
name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing
or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For
SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements,
verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column
has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For
other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at
System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean
sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteBatches(String cmdText) at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String
cmdText, CommandType cmdType, Boolean inTransaction, Transaction transaction) --- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String cmdText, CommandType cmdType, Boolean inTransaction,
Transaction transaction) at Microsoft.BizTalk.Bam.Management.ViewModule.Create(XmlDocument defXmlDoc) at Microsoft.BizTalk.Bam.Management.WorkerModule.DispatchOperation(OperationType operation, XmlDocument defXmlDoc) at
Microsoft.BizTalk.Bam.Management.BamManager.ProcessOneBamArtifactType(BamArtifactType bamArtifact, OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.ManageInfrastructure(OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.Deploy()
--- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.BamManager.Deploy() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleDeployAll() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)

Your View Name, OLAP Cube Name and certain other restrictions listed @http://msdn.microsoft.com/en-us/library/aa561577.aspx
Please review your BAM Definitons.
Regards.

Regarding the tns-12541 error in connecting to sql server from oracle

i need to create a database link from oracle on windows box to sql server.I configured everything but when i am trying to tnsping the sqlserver
it throws me an TNS12541 no listener error.
The listner status is up and the listener works

little confusion here, are you trying to tnsping sql server? tnsping is an Oracle utulity.
To acces sql server from Oracle you may use Transparent Gateway for Microsoft SQL - http://download.oracle.com/docs/cd/B19306_01/gateways.102/b14270/ch3.htm#sthref66 and Heterogeneous Connectivity - http://download.oracle.com/docs/cd/B19306_01/server.102/b14232/intro.htm#sthref33
Best regards.

Error while starting the OIM managed server in oracle VM

Hi ,
I am getting the following error , while starting the OIM managed server in Oracle VM.
<Jun 14, 2012 4:45:38 AM EDT> <Error> <org.quartz.impl.jdbcjobstore.JobStoreCMT> <BEA-000000> <MisfireHandler: Error handling misfires: Unexpected runtime exception: null
org.quartz.JobPersistenceException: Unexpected runtime exception: null [See nested exception: java.lang.NullPointerException]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3042)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
Caused By: java.lang.NullPointerException
at org.quartz.SimpleTrigger.computeNumTimesFiredBetween(SimpleTrigger.java:800)
at org.quartz.SimpleTrigger.updateAfterMisfire(SimpleTrigger.java:514)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doUpdateOfMisfiredTrigger(JobStoreSupport.java:944)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.recoverMisfiredJobs(JobStoreSupport.java:898)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3029)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
>
How to resolve this issue.Any one please suggest me , i am in a big trouble ...
Thanks in advance ..
-Deena.

Hi P.k,
The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
What is GTC resource?
OIM version - 11.1.1.5.0.
-Deena.

Error when insert data in Sql Server table(DateTime data type)

Hello all,
I have created a database link in oracle 11g to SQL Server 2008 using Sqlserver gateway for oracle,Oracle run on Linux and SQL Server run on Windows platform.
I have queried a table and it fetches rows from the target table.
I am using this syntax for insert a row in Sql Server table.
Insert into Prod@sqlserver (NUMITEMCODE, NUMPREOPENSTOCK, NUMQNTY, NUMNEWOPENSTOCK, DATPRODDATE , TXTCOMPANYCODE, "bolstatus", NUMRESQNTY )
Values (1118 , 1390.0 , 100.0 ,1490 , '2012-06-23 12:37:58.000','SFP' ,0 , 0 );
but it give me error on DATPRODDATE,The data type of DATPRODDATE column in Sql Server is DATETIME.
My Question is how can i pass the date values in INSERT statement for Sql Server DateTime data type.
Regards

Just as with Oracle, you have to specify the date using the to_date() function or use the native date format for the target database (if you can figure out what that is). This is good practice anyway and a good habit to get into.

Error while inserting into ms access using jsp

i am using the following code to insert values from textboxes into access database
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con = DriverManager.getConnection(url);
          Statement stmt=con.createStatement();
          //ResultSet rs = null;
          //String sql = ("INSERT INTO co-ords VALUES ('" + nam + "','" + lat + "','" + lon + "','"+ latm +"','"+ lonm +"','"+ latmd +"','"+ lonmd +"','"+ latms +"','"+ lonms +"') ");
          String sql = "INSERT INTO co-ords (nam ,lat , lon , latm ,lonm , latmd , lonmd ,latms , lonms) VALUES ('" + nam + "','" + lat + "','" + lon + "','"+ latm +"','"+ lonm +"','"+ latmd +"','"+ lonmd +"','"+ latms +"','"+ lonms +"') ";
          out.println(sql);
          stmt.executeUpdate(sql);
the output i get is
INSERT INTO co-ords (nam ,lat , lon , latm ,lonm , latmd , lonmd ,latms , lonms) VALUES ('cck','28.656529681148545','77.23440170288086','28','77','39','14','23.508','3.8472') Exception:java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
can somebody help me?

Simple,
Some error in your query right. Unable to understand Quotation stuff.
Well understand it properly else error will follow forever :)
Without String, Straight Away Values
stmt1.executeUpdate("insert into Login_Details values('Example','Exmaple')");This is the query with Login_Id Pass_Word String containing the value
stmt1.executeUpdate("insert into Login_Details values('"+Login_Id+"','"+Pass_Word+"')");Then storing sql as string and pass it in executeUpdate(sql)
String sql="insert into Login_Details values ('example','example') "String + Values in String
String sql="insert into Login_Details values ('"+example+"','"+example+"') "Just first it . Hope this reply solve ur SQL EXCEPTIONG
Sachin Kokcha

Inserting Records from SQL Server to Oracle using trigger

Hi All,
I have 2 Database SQL Server And Oracle 12c.
Now I want to Implement such functionality by which i just need to insert data in SQL Server
and data also inserted in Oracle.
How can i do it?
I found LinkServer concept but i'm not much aware of it.
Regards,
Rahul

If it were me I would use replication.
Andy Tauber
Data Architect
The Vancouver Clinic
Website | LinkedIn
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Migrating from SQL Server to ORACLE using SqlDeveloper tool - IN OUT CURSOR

Hi All,
I am new to Oracle. I am asked to migrate a database from SQL Server to ORACLE. I have migrated all the SP's and functions except 2. I am facing the following problem. Pls do reply me if anyone knows the solution since I am struggling for the past 2 days for these two functions
the function is as follows in ORACLE.
create or replace
FUNCTION ABC
AA IN VARCHAR2,
BB IN DATE,
CV_1 IN OUT SYS_REFCURSOR
When I tried to call from some other function its showing me an error.
I called from another function as follows:
ABC(CC,DD,CV_2);
Shall I know how to call the above function? I feel someone has faced the same problem before. Thanks in advance for the help.
Thanks,
Srinivasan.T

Its returing a number only. I am just giving part of the function.
create or replace
FUNCTION ABC
AA IN VARCHAR2,
DD IN DATE,
CV_1 IN OUT SYS_REFCURSOR
RETURN NUMBER
AS
When I call the function which has a IN OUT SYS_REFCURSOR as a parameter I am facing this problem.
I need to know how to call a function which has the IN OUT SYS_REFCURSOR parameter.
Thanks,
Srinivasan.T

Connect to SQL Server from Oracle

Does Oracle offer any connectivity to NON-Oracle databases such as SQL Server from within the Oracle database itself, similar to a database link ?

Yes, it's called Heterogeneous Connectivity. Basically how it works is you set up an ODBC data source on the Oracle server
and need to modify the tnsnames.ora and listener.ora files. Once you get it set up it works exactly like a dblink. You should be
able to find information on it in the Oracle manuals or from Metalink. There's also a Heterogenous Connectivity forum on OTN. If
you can't find anything let me know and I can send you some documents on how to set it up. I think the hardest part for you might
be finding a SQL Server ODBC driver for HP-UX.

Connecting to SQL Server from Solaris using Perl & Oracle.

Hey All,
Using the DBI.pm provided by the default Perl package that comes integrated with Oracle server, I am being able to connect to the Oracle database through Perl.
But is there a way I can connect to SQL Server through Perl using any package provided by Oracle like ODBC or something else (on Solaris)
I am using following version of Oracle server on Solaris 10
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
TIA
Parag

The problem is I cannot install any third party package but I found something. Have a look at this:
bash-3.00$ pwd
/opt/oracle/product/10.2.0.4.0/perl/lib/site_perl/5.8.3/sun4-solaris-thread-multi/Win32
bash-3.00$ ls -l
total 10
-rwxr-xr-x 1 oracle dba 4532 Jul 7 2004 DBIODBC.pm
bash-3.00$
Will explore more and keep you all posted.
Cheers,
Parag

Entity Framework - Code First - Migration - How to access SQL Server and Oracle using the same context?

Hello,
I use Entity Framework code first approach.
My project is working fine with SQL Server. But, I want to access Oracle too. I want to switch SQL Server and Oracle in run time.
I am able to access Oracle using "Oracle.ManagedDataAccess.EntityFramework.dl" in a new project.
But, Is this possible to access SQL Server and Oracle in the same project.
Thanks,
Murugan

This should be possible with a Code-First workflow. In Code-First the database mapping layer is generated at runtime.
David
David http://blogs.msdn.com/b/dbrowne/

Error while inserting into MS-SQL Server from Oracle using HS

Similar Messages

Maybe you are looking for