Error while loading xml files using JDBC
Hi,
I am trying to load xml files into an xmltype table using JDBC calls and am getting this error for some files
LPX-00200: could not convert from encoding UTF-8 to UCS2
The xml files and our database are both UTF-8 encoded. The version of oracle that we have here is 9.2.0.6
Any suggestions in this matter will be greatly appreciated.
Thanks,
Uma
I also experienced this problem and unfortunately this solution didn't work for me given that the tag you suggested was already on the XML file.
Similar Messages
-
FDF error while loading xml file onto PDF
Need some help here folks. Im getting a FDF error while loading some value into pdf form. It not happening all the time, 1 out of 60 times with the same xml file onto a new pdf form. Anyone know why this happening. Is there some technical support i can purchase to get this resolved.
9.1 and 9.3.4
Date: Fri, 5 Aug 2011 00:56:19 -0600
From: [email protected]
To: [email protected]
Subject: FDF error while loading xml file onto PDF
Could you let me know which version of Adobe Reader are you using?
> -
I am getting error while loading the XML file. I have attached the jpg file which shows error details.....pls let em know the solution....
thanksWhat is the error message? Where is the jpeg?
-
Error while loading XML files into scott user
Hi All,
I'm new to xml files. I need to load xml files into database through OWB.
I have xml file in my local machine & am trying to load into table PO of Scott. Scott is registered as repository user.
Followed same steps as specified in userguide.
But, when executing the procedure ( in two ways one as just table name, and other as user.table name) it is showing the below error:
Procedure is:(1)--with username.tablename
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">scott.PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object SCOTT.PO.
Base exception: ORA-01031: insufficient privileges
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at "SCOTT.SAMPLE1", line 3
ORA-06512: at line 1
Procedure is:(2) with out username
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object PO.
Base exception: ORA-00942: table or view does not exist
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at line 2
xml file:
<ROWSET>
<ROW>
<ID>100</ID>
<ORDER_DATE>2000.12.20</ORDER_DATE>
<SHIPTO_NAME>Adrian Howard</SHIPTO_NAME>
<SHIPTO_STREET>500 Marine World Parkway</SHIPTO_STREET>
<SHIPTO_CITY>Redwood City</SHIPTO_CITY>
<SHIPTO_STATE>CA</SHIPTO_STATE>
<SHIPTO_ZIP>94065</SHIPTO_ZIP>
</ROW>
</ROWSET>
Note: Everything works fine if I create PO table in OWBSYS user and execute the procedurein OWBSYS user. OWBSYS.PO table will be loaded.
What privileges are missing, what shouldI do if I want to execute the procedure from scott user and load the table of scott.
Thanks in advance for the help.
Regards,
JoshnaHi Joshna,
Please follow below steps to load xml file to oracle database.
1.First connect to owb (Design Center) through your repository owner user (ex : REP_OWNER).
2. Import WB_XML_LOAD procedure . and exit to repository owner.
3. connect to owb design center through your repository user (ex : REP_USER)
Create New mapping and drag one Constant Operator and create one attribute, paste / edit following code
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>E:\SOURCE\emp.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target truncateFirst = "FALSE" dateFormat="yyyy.MM.dd">rep_user.emp</target>'||
'</targets>'||
'</OWBXMLRuntime>'
4. Drag pre mapping operator and select WB_XML_LOAD procedure
5. Connect Constant Operator attribute to pre mapping operator.
6. Drag two dummy tables and connect source to target. (ex : drag t1 (table) tab two times and connect.
7. Validate and deploy the mapping.
8. grant necessary grant command to rep_owner user to rep_user user.
(Note : target truncateFirst = "FALSE" by default truncate the table. So you have to give grant privileges
To rep_user , select ,insert, delete privileges.
9. Execute the mapping , and check EMP table. (Note : before loading EMP table delete all records ).
10 . If you want more description please go through the below link
http://download.oracle.com/docs/html/A95931_01/apf.htm
Regards
Venkat -
Error while saving xml file using PDFDocument API
Hi,
I am trying to save xml file using byte array obtained from interactive form element in webdynpro java.
The file gets saved but I get fllowing error message when I open the file.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'http://uxjciesk.wdf.sap.corp:50000/irj/go/km/doc...
The code I am trying to achieve the functionality is:
byte[] byteArray = wdContext.currentContextElement().getPdfSource();
IWDPDFDocumentHandler pdfDocumentHandler = WDPDFDocumentFactory.getDocumentHandler();
IWDPDFDocumentAccessibleContext documentAccessibleContext = pdfDocumentHandler.getDocumentAccessibleContext();
documentAccessibleContext.setPDF(byteArray);
IWDPDFDocument pdfDocument = documentAccessibleContext.execute();
ByteArrayInputStream dataInputStream = (ByteArrayInputStream) pdfDocument.getPDFAsStream();
further, the datainputstream is used to store the file. I am able to save same xdp template in pdf file format successfully, the error only occurs for xml file storage.
Please, advise.
Regards,
UrvashiHi Urvashi,
Try this code
String contentStr = getXMLData(wdContext.currentContextElement().getPdfSource().read(false));
String data = "";
ByteArrayOutputStream pdfSourceOutputStream = new ByteArrayOutputStream();
try {
InputStream pdfSourceInputStream = wdContext.currentContextElement().getData().read(false);
BufferedInputStream bufferedInputStream = new BufferedInputStream(wdContext.currentContextElement().getData().read(false));
int aByte;
while ((aByte = bufferedInputStream.read()) != -1) {
pdfSourceOutputStream.write(aByte);
pdfSourceOutputStream.flush();
pdfSourceOutputStream.close();
IWDPDFDocument pdfDocument = null;
try {
// Create an instance for PDFDocumnetHandler
IWDPDFDocumentHandler pdfDocumentHandler = WDPDFDocumentFactory.getDocumentHandler();
//Create an Inatance for PDFDocumentAccessibleContext
IWDPDFDocumentAccessibleContext documentAccessibleContext = pdfDocumentHandler.getDocumentAccessibleContext();
//set the pdf data as OutputStream to the PDFDocumentAccessibleContext instance
documentAccessibleContext.setPDF(pdfSourceOutputStream);
//call the server to get the data
pdfDocument = documentAccessibleContext.execute();
//get the xml data in a InputStream
ByteArrayInputStream dataInputStream = (ByteArrayInputStream) pdfDocument.getData();
} catch (Exception e) {
data = "Null";
} catch (IOException e) {
Regards,
Mathan -
Error while loading XML file to XML_type column
I am trying to load a huge xml file in table having xml_type column. I am getting an error
The following error has occurred:
ORA-20010: Error: ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00216: invalid character 140 (0x8C)
Error at line 2 at location: 10
Any suggestions why I might be getting this errors?
Is there any size restriction on the file that we can load with loadfromfile?
THis is the procedure I have written to load the file--
CREATE OR REPLACE procedure vsave_xml_file_to_table(
p_directory in varchar2,
p_filename in varchar2 )
AUTHID DEFINER
as
v_filelocator bfile;
v_cloblocator clob;
v_filelength number;
v_loc number :=10;
begin
dbms_lob.createtemporary(v_cloblocator,true);
v_filelocator := bfilename(p_directory, p_filename);
dbms_lob.fileopen(v_filelocator, dbms_lob.file_readonly);
dbms_lob.loadfromfile(v_cloblocator, v_filelocator,dbms_lob.getlength(v_filelocator));
v_filelength := dbms_lob.getlength(v_filelocator);
DBMS_OUTPUT.PUT_LINE('File is loaded and its size is :'|| v_filelength);
dbms_lob.fileclose(v_filelocator);
--insert into vxml values(1, XMLType.createXML(v_cloblocator));
insert into vxml values(1, XMLType(v_cloblocator,null,0,0));
DBMS_LOB.FREETEMPORARY(v_cloblocator);
exception
when others then
-- close the cursor and file, and reraise.
if dbms_lob.fileisopen(v_filelocator) = 1 then
dbms_lob.fileclose(v_filelocator);
end if;
rollback;
raise_application_error (-20010,'Error: '||sqlerrm|| ' at location: '||v_loc);
end vsave_xml_file_to_table;
The input file is of size 5K.
The procedure loads a file of size around 100 bytes with no problem.
I am on Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
Please help
Thanks!As you said, i have changed the Code, But still the same error,
CREATE OR REPLACE FUNCTION fn_Ins_CLOBDOCUMENT(FILENAME IN VARCHAR2,
CHARSET IN VARCHAR2 DEFAULT NULL)
RETURN CLOB DETERMINISTIC IS
FILE BFILE := BFILENAME('FXLMBAH', FILENAME);
CHARCONTENT CLOB := ' ';
TARGETFILE BFILE;
LANG_CTX NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
CHARSET_ID NUMBER := 0;
SRC_OFFSET NUMBER := 1;
DST_OFFSET NUMBER := 1;
WARNING NUMBER;
BEGIN
IF CHARSET IS NOT NULL THEN
CHARSET_ID := NLS_CHARSET_ID(CHARSET);
END IF;
TARGETFILE := FILE;
DBMS_LOB.FILEOPEN(TARGETFILE, DBMS_LOB.FILE_READONLY);
DBMS_LOB.LOADCLOBFROMFILE(CHARCONTENT,
TARGETFILE,
DBMS_LOB.GETLENGTH(TARGETFILE),
SRC_OFFSET,
DST_OFFSET,
CHARSET_ID,
LANG_CTX,
WARNING);
DBMS_LOB.FILECLOSE(TARGETFILE);
RETURN CHARCONTENT;
END;
INSERT INTO XMLTABLE
VALUES(XMLTYPE(fn_Ins_CLOBDOCUMENT('purchaseorder.xml')))
ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "LCC.FN_INS_CLOBDOCUMENT", line 17
ORA-06512: at line 1raja
Edited by: KrChowdary on Feb 18, 2009 3:36 PM -
Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide SolutionHi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change................. -
ORA-22288:file or LOB operation FILEOPEN failed while loading XML file.
Hello all,
I am getting the following error messages while loading XML file to Oracle 9i table.
declare
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.DBMS_LOB", line 504
ORA-06512: at line 10
The script I am using is all follows:-
1. Created a file ldxmldata.sh on unix server directory
dd conv=ucase if=$1|sed 's/<?XML/<?xml/'|sed 's/VERSION/version/'|sed 's
/RECORD/ROW/'|sed 's/DATE/TRANSDATE/'|sed 's/&/-/'|sed 's/\/DATE>// TRANSDATE>/'>$1.UCASE
sqlplus sales/sales@rac @upld.sql $1.UCASE
2. Created SQL file upld.sql on unix server
set serveroutput on
exec DBMS_JAVA.SET_OUTPUT(1000000);
@ldxml.sql bsl.xml.UCASE
commit;
exit
3. Created sql file ldxml.sql on unix server
declare
insCtx DBMS_XMLSave.ctxType;
rows number;
file bfile := bfilename('XML_DIR','&1');
charContent CLOB := ' ';
targetFile bfile;
warning number;
begin
targetFile := file;
DBMS_LOB.fileopen(targetFile, DBMS_LOB.file_readonly);
DBMS_LOB.loadfromFile(charContent,targetFile,DBMS_LOB.getLength(tar
getFile),1,1);
insCtx := DBMS_XMLSave.newContext('sales.s_price');
rows := DBMS_XMLSave.insertXML(insCtx,charContent);
DBMS_XMLSave.closeContext(insCtx);
DBMS_LOB.fileclose(targetFile);
end;
4. As Sys,
Created a directory XML_DIR and assigned it the path of Unix server directory
where the script files reside.
Granted read priviledge on XML_DIR to user sales.
I am getting the above error messages. Kindly help with some possible solution.
Arun Patodia
Bokaro Steel CityHi guys,
Sybrand, aplogoies, the second line of the error stack was on one line in the first post, full error stack below:
ORA-22288: file or LOB operation FILEOPEN failed
The program issued a command but the command length is incorrect.
ORA-06512: at "SYS.DBMS_LOB", line 716
ORA-06512: at "JLMS.LOAD_DATA_UTIL", line 417
ORA-06512: at line 2I have looked at that error code as you mentioned, but the second line here doesn't really help much.
Hoek, i took your advice and tried to replace FILEOPEN with OPEn but got the same error.
Just to clarify as well, I am not using UNC or relative file paths as I know that these can cause problems.
Rgds
Dan -
Error while uploading .xml file for Customer/Vendor List for Italy
Hi All,
We are facing problem while uploading the .xml file in DMEE transaction for the new Customer/Vendor List for Italy.
We have followed the entire process given in the OSS Note(1090857).
We have SAP 4.6c and followed the below steps:
1. Created ID-FI-IT Development class
2. Added domains
3. Added Data elements
4. Tried to upload the given .xml file and got any error saying ".xml file could not be interpreted".
Also there is a .SAR file mentioned to upload if we receive any errors while uploading .xml file.
Tried uploading the .SAR file also. STill we are recieving the same Error.
Can any one of you help us out.
Thanks in Advance.
RameshOk, we upload .SAR file in this way:
1. unpack .SAR file with SAPCAR.EXE program. Yuo obtain 2 files
R492445.P9C and K492445.P9C
2. put K492445.P9C in directory \SAPMNT\TRANS\COFILES and put R492445.P9C in directory \SAPMNT\TRANS\DATA of your system (DEV, TST or PRD)
3. Use Tx STMS. If You want create DMEE tree in DEV system, go to DEV import queue. Choose menu Extras | Other requests | Add. Insert P9CK492445 in Transp. request field.
4. Import the request. This creates the DMEE tree. You don't need ti upload XML file after. You can see the DMEE tree created with Tx DMEE and inserting
Tree type UMS1
Format tree IT_CUST_VEN_LIST
5. after continue follow the note
I hope this help you
Roberto -
Error while retreiving xml file from database
Hi-
I am trying to configure Planning and getting the following error message at instance configuration step:
"Error while retreiving xml file from database"
We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
Here is the contents of the configtool error file:
(Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
(Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
Thanks for any help.After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
Here is another quote from SharedServices_Security.log
2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null. -
Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AMThis has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/ -
Error while importing .xml files in informatica
Dear Rajendra, Please use this.
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<my:MainFields xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://schemas.microsoft.com/office/infopath/2003/myXSD/2010-10-14T12:46:24 myschema.xsd " xmlns:my="http://schemas.microsoft.com/office/infopath/2003/myXSD/2010-10-14T12:46:24"> i used same like this my side its working. Please let me know. Thanks & RegardsKasireddy+966545281845Hi All, Please help out getting below error while reading .xml file in informaitca 9.5.0 error:: FATAL: Error at (file D:/userdata/local/Desktop/documents/2015_07_22_NE_5003.xml, line 2, char 52 ): An exception occurred! Type:RuntimeException, Message:Could not open DTD file 'D:/userdata/ongole/Desktop/documents/InventoryInfo.xml'. Let me know. how to overcome this issue. Regards,Rajendra
-
Error while importing .xml file in Datatype
Hi SDN,
I am getting this error while importing .xml file in Datatype.
Error when parsing the XML document (Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8
Actually I have created datatype in my development box..
but my client doesn't want to develop in development box.
so i have exported that datatype as xsd from datatype editor.
and while importing into sandbox datatype editor i am getting this error..
Any help please......Hi Rajeev,
now i have an .xml file its not importing into datatype...
error is
Error when parsing the XML document (Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8))
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema targetNamespace="http://abc.com/xa" xmlns="http://abc.com/xa" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<xsd:complexType name="DT_PLANNINGSCHEDULE">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">3c6ae480f2f111dbc7ac0002556ad065</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="PlanningSchedule_Output">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">c65d41c0f15b11dbb29f00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="PlanningScheduleHeader">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">c65d41c1f15b11dbb6ef00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ScheduleID" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">6c804600f15d11dbc02400123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="ScheduleIssueDate" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">a370c1d0f15d11db8dd800123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="SchedulePurpose">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">a370c1d1f15d11dbac4100123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Purpose">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1b4fd50f15e11db9eb600123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="PurposeCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1b4fd51f15e11dbc47a00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ScheduleTypeCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">a370c1d2f15d11dbbc3900123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="ScheduleTypeCodedOther" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">a370c1d3f15d11dba00200123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="QuantityQualifierCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">a370c1d4f15d11dbc7e000123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="ScheduleParty">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">a370c1d5f15d11db969a00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="BuyerParty">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">449ec100f16411dba2e900123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Party">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">449ec101f16411db997a00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="PartyID">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">449ec102f16411dbb75900123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Identifier">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">449ec103f16411db8fa500123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Agency">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">449ec104f16411dba93f00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="AgencyCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">449ec105f16411dba20f00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Ident" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">0de2f450f16511dbaa4700123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ListOfIdentifier">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">9a25b6d0f16711dbbdd800123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Identifier" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">9a25b6d1f16711dbcd2600123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Agency">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">9a25b6d2f16711db82f800123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="AgencyCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">9a25b6d3f16711dbcf6e00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Ident" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">9a25b6d4f16711dbcb6200123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="SellerParty">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">e0422b80f16711dba8c100123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Party">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1c2fb80f16811db82e800123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="PartyID">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1c2fb81f16811dba6ab00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Identifier">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1c2fb82f16811db8b4e00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Agency">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1c2fb83f16811dbc0ff00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="AgencyCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1c2fb84f16811dbb8f700123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Ident" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1c2fb85f16811dba46200123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ListOfIdentifier">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1c2fb86f16811db98c000123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Identifier" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1c2fb87f16811dbb25200123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Agency">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1c2fb88f16811dbc7d100123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="AgencyCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">e99ffa30f16811dba27100123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Ident" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">7c7c4d30f16a11dbb29f00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ShipFromParty">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">e0422b81f16711dbbfce00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Party">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">7c7c4d31f16a11db9adf00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="PartyID">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">7c7c4d32f16a11dbbef100123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Identifier">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">7c7c4d33f16a11db9e5600123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Agency">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">7c7c4d34f16a11dbba6d00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="AgencyCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">7c7c4d35f16a11db855400123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Ident" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">7c7c4d36f16a11db877300123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ShipToParty">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">e0422b82f16711db84ec00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Party">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">275ecac0f16b11dba49600123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="PartyID">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">275ecac1f16b11db80c700123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Identifier">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">275ecac2f16b11db8ea300123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Agency">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">275ecac3f16b11dbb5bb00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="AgencyCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">275ecac4f16b11dbb7bc00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Ident" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">275ecac5f16b11db92a300123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Language">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">a370c1d6f15d11db9f9a00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="LanguageCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">b1b4fd52f15e11dbc06300123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ListOfLocationGroupedPlanningDetail">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">c65d41c2f15b11dba9fd00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="LocationGroupedPlanningDetail" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">89515130f17f11db98e400123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Location">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">de832980f17f11db8d4600123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="LocationIdentifier">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">f95b26d0f18011db8ce800123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="LocID">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">f95b26d1f18011db839900123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Identifier">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">f95b26d2f18011dba45300123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Agency">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">f95b26d3f18011db9ac700123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="AgencyCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">f95b26d4f18011dbc4ab00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Ident" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">f95b26d5f18011dbcd4400123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ListOfLocationPlanningItemDetail">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">de832981f17f11db856100123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="LocationPlanningItemDetail">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">d8257410f18111db8b6f00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="BasePlanningDetail">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">d8257411f18111db839c00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="LineItemNum">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">d8257412f18111db847f00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="BuyerLineItemNum" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">d8257413f18111dbcf7200123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ItemIdentifiers">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">d8257414f18111dba6f100123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="PartNumbers">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">d8257415f18111db968700123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="BuyerPartNumber">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">d8257416f18111db9f9100123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="PartNum">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">d8257417f18111dbc32500123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="PartID" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">d8257418f18111dbcfa900123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="StandardPartNumber">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">50b67960f18211db839c00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ProductIdentifierCoded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">50b67961f18211dbc78900123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ProductIdentifierQualifierCoded" type="xsd:integer">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">50b67962f18211dbae6e00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="ProductIdentifier" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">83815570f18411dbb4e800123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ItemDescription" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">83815571f18411db876f00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ListOfItemReferences">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aef0f18711dbbafe00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ListOfReferenceCoded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aef1f18711db8a7600123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ReferenceCoded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aef2f18711db935200123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ReferenceTypeCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aef3f18711dba69c00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="ReferenceTypeCodedOther" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aef4f18711db942b00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="PrimaryReference">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aef5f18711db93a800123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Reference">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aef6f18711dbcebc00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RefNum" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aef7f18711dbce6300123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ForecastFrequencyCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aef8f18711db937b00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ListOfScheduleDetail">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aef9f18711dba61400123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ScheduleDetail">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aefaf18711db9d4800123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="CommitmentLevelCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aefbf18711dba59800123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="ScheduleDates">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aefcf18711db947900123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ListOfDateCoded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aefdf18711dbc43e00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="DateCoded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aefef18711dbaa5000123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="Date">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59aefff18711dbcde600123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="DateQualifier">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59af00f18711db87f100123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="DateQualifierCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59af01f18711dbc9cf00123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="ScheduleQuantities">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59af02f18711dbc24100123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="ListOfQuantityCoded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59af03f18711db842900123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="QuantityCoded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59af04f18711dbb59400123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="QuantityValue" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">2e59af05f18711dba6d900123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="UnitOfMeasurement">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">a87e2580f18711dbc66f00123fbbc71c</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="UOMCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">a87e2581f18711db89a000123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="QuantityQualifierCoded" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">a87e2582f18711db9a1500123fbbc71c</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema> -
Getting error while loading Flat File
Hello All,
I am getting error while loading flat file. Flat file is a CSV file.
Value ',,,,,,,,' of characteristic 0DATE is not a number with 000008 spaces
Data seprator |
Escape sign ;
It has 23708 entries , it s loading successfully till 23 665 entries
Besides when checked in PSA
for record having entries >23667 has calender day as ,,,,,, where as rest entries are having date
Besides when i checked in Flat file ,the total number of rows is 23,667 is there but i wonder why it has got 23,708 in
RSMO
Could you please let me know how to correct.
regards
pathHi,
For date column you should maintain YYYYMMDD formate Eg: 20090601, kepp cursor on date column and right click and Formate >Custome>make it 00000000 then save teh file as .CSV . First type values on column and do like this formate and save it and without opening it load it. Once you open it you losw 00000000 formate you need to give again the same formate.
Settings in Infopackage:
Data Format = CSV
Data Separator = ,
Escape Sign = ;
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ed2fe3811a77e10000000a422035/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6567e07211d2acb80000e829fbfe/content.htm
Thanks
Reddy -
System Failure:-Error while retreiving xml file from database
I install Planning 9.3.1 at Windows2003 server SP1 and MS SQL 2000 SP3A. In Hyperion Planning Instance Registration I take "System Failure:-Error while retreiving xml file from database" error in Configuration .
Please help
ThanksI also have the same error. Win2000 Server and MS SQL 2005.
Maybe someone made request for official information from Oracle about this issue?
I'd like to change MS SQL to Oracle 10g, I hope this can helps (if reason in RDBMS). But if reason in logic of scripts... I dont't know...
Maybe you are looking for
-
In the past 4 weeks I started experiencing this issue: some of the messages I send from my iphone and ipad will NOT show in Messages Beta for Mac OSX. Likewise, some of the messages received on my iphone and ipad often don't show on my Messages Beta.
-
Package Contents of iPhoto 08 shows Library6.iPhoto
When I right click on my "iPhoto Library 08" and "show package contents", I have the usual array of Originals folder, modified and data folders. BUT, I also have 2 listings as follows: 1. Library.iPhoto 4 kb 2. Library6.iPhoto 15.9 MB I'm a bit confu
-
Offline adobe forms using webservices-how to print table data
HI, i have created offline adobe form using webservices which call rfc to pull the data ...to get inspection lot details ... iam getting header data....but iam not able to get multiple line items of the table data ..here in scenario there are 4 line
-
Quick Tips 101 for For Easy Get Around
ZOOMING: 1: The shortest way to zoom in to what you need is to select region(s) you need then hit the "Z" key on your keyboard to zoom in only on that region or what ever regions you've selected 2: The other way is to hold "CONTROL" then using the mo
-
hi, can any one suggest the replacement for the obsoletes. table: ce4hopc func: help_values_get_with_maco thanks vinod