Error while migrating BLOB data

Hi ,
I am migrating the data from oracle to oracle and both soruce and target tables have BLOB type field.
I am getting error when I am executing the interface with these blob fields. But My interface is successfull if I am not maaping this blob files.
Below is the error message.
ODI-1217: Session BLOB (162501) fails with return code 942.
ODI-1226: Step BLOB fails after 1 attempt(s).
ODI-1240: Flow BLOB fails while performing a Loading operation. This flow loads target table IMAGES.
ODI-1228: Task SrcSet0 (Loading) fails on the target ORACLE connection YAGLD.
Caused By: java.sql.BatchUpdateException: ORA-00942: table or view does not exist
Thanks,
Patel.

Hi Ayush ,
Thank you for the information. Yes it is a bug and it seems it is rectified in 11.1.1.7 version.
thanks ,
Patel.

Similar Messages

Error while migrating BLOB type data

Hi ,
I am migrating the data from oracle to oracle and both soruce and target tables have BLOB type field.
I am getting error when I am executing the interface with these blob fields. But My interface is successfull if I am not maaping this blob files.
Below is the error message.
ODI-1217: Session BLOB (162501) fails with return code 942.
ODI-1226: Step BLOB fails after 1 attempt(s).
ODI-1240: Flow BLOB fails while performing a Loading operation. This flow loads target table IMAGES.
ODI-1228: Task SrcSet0 (Loading) fails on the target ORACLE connection YAGLD.
Caused By: java.sql.BatchUpdateException: ORA-00942: table or view does not exist
Thanks,
Patel.

Duplicate of
Error while migrating BLOB type data

Error while migrating users using CSSImportExportUtility

Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?

I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz

Syntax errors while migrating from non- unicode to Uni code

What are the syntax errors while migrating from non unicode to Uni code

Hi Sudheer,
u can get the information related to errors while migrating from non- unicode to Uni code from the below...pls go through...
Note 765475 - Unicode Conversion: Troubleshooting
these are the notes related to the issues of migration form non unicode to ounicode.
Related Notes
986907 - SQL Server settings for R3load based system copy
954001 - Error fix: ILLEGAL_SUBSTRING_MODIFICATION in SUMG
936441 - Oracle settings for R3load based system copy
928909 - Repair table data in SUMG in Unicode systems
895804 - Problematic rows in table DMEE_TREE_NODE
895560 - Support for languages only available in Unicode system
885441 - Common Migration Errors
842788 - DB Multiconnect: Unicode Migration
837173 - RADCUCNT in Unicode Conversion: Collective Note
756534 - Automatic Assignment of Languages with Character Statistics
753334 - Unicode Conversion: Problem in Japanese device types
726954 - Private Use Areas in Unicode Systems
722193 - RFC legacy non-Unicode clients and Unicode servers
718329 - R3load terminates the export during a Unicode conversion
695196 - Error in the export for Unicode migration
672835 - Textflags could cause problems during Unicode conversion
627764 - Unicode migration: table pools inconsistent after conversion
614550 - Troubleshooting BC-I18
587896 - Add. info on upgrade to SAP R/3 Enterprise Core 4.70 SR1
573044 - Unicode conversion for HR application
480671 - The Text Language Flag of LANG Fields
379940 - Unicode based mySAP availability
79991 - Multi-Language and Unicode support of SAP applications
73606 - Supported Languages and Code Pages
42305 - RSCPINST (I18N configuration tool)
regards,
rudra..
Assign points if helpful

Error while Activating DSO Data

Hello
I am having a problem, I am getting an Error while activating DSO Data, Data is loaded in DSO succefully but can not be activated with this error
"Activation of M records from DataStore object 0FIAR_O03 terminated"
Thanks

Hi,
The activation would have failed due to varies reasons..
It would be a short dump,check in ST22.
check the job log in SM37 for better understanding of the issue.
Have you loaded the respective master data?
if it is a transaction data load,then the SID is checked at the time of activation and not during loading.
So if the master data is not loaded then the activation would fail.
It can also be due to the system performance at that moment.
Even if the data volume is huge ,there are chances of the activation failing..
Try repeating the activation once again.it might succeed..
Else check the logs to understand the actual issue.

Getting an error while viewing a data in owb

Hi,
I created an External table based on a flat file. But I am not able to view the data in the external table while the flat file has the data.
I am using this external table as a source in my mapping but no data is getting loaded even after the successful execution of the mapping.I am getting the following error while viewing the data
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-29400: data cartridge error
KUP-04040: file ATLAS in ATLAS_LOCATION1 not found
Please help me regarding this. I am new to the owb 11g.

Thanks for you reply. Still I can't view the data. Actually what i did is imported a .csv file using files then created a external table configured , validated and deployed.In next step created a mapping with this excel this using table operator validated and genrated code. In next step using the control center manager i deployed it. But i can't view the data still in the external table.
Is this procedure is correct for loading the excel sheet in to databse. My client environment is on windows xp and database is on linux environment.
Please help me regarding this.I am new to owb.

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Error while migrating reports from XI3.1 to BI4.0

Hi,
I have converted deski report into webi report using report conversion tool and i am trying to migrate the converted report from XI 3.1 to BI 4.0. I am getting 'Error:INF' while doing this. how to overcome this error while migration ?. any suggestions..
Regards,
Shanthakumar.

Hi,
could you please provice a little more information. Can you view the converted Reports in your XI 3.1 Environment? Are you trying to view the Reports as administrator in your BI4 Environment?
Regards
-Seb.

Error while creating requirements data in pendulum list indirect sales.

hi all,
i am getting the following error while creating requirement data in pendulum list indirect sales. t - code - /BEV4/PLAN
" ERROR OCCURED WHILE DETERMINING PERIOD IDENTIFIER""
-- help would be much appreciated..
thanks in advance
leo

var spObj = $().SPCascade({
destListColTitles: ['Continent','Country','State','City'],
srcListColInternalNames: ['Continent','Country','State','Title'],
srcListName: 'CitiesLookupList',
srcListFilterCAMLQuery: "<Query><Where><Contains>
<FieldRef Name='Continent'/><Value Type='Text'>America</Value>
</Contains></Where></Query>"
spWebURL: 'http://sharepointurl',
getDataOnly: 'false',
debug: 'true',
});

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Error while retrieving bulk data from mdm in staging server

I am getting an error while retrieving bulk data from MDM. The error goes like this "NiRawReadError: An error occured when reading data from socket.".
Could anyone please suggest me about the possible cause of this error. Please reply soon.
Moderator message: network error, relation to ABAP development unclear, please search for available answers, check with system administrators, consult SAP service marketplace.
Edited by: Thomas Zloch on Nov 22, 2010 5:16 PM

Can you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted.

Error while loading the data from PSA to Data Target

Hi to all,
     I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
      Request IDoc : Application document posted
      Info IDoc 2 : Application document posted
      Info IDoc 1 : Application document posted
      Info IDoc 4 : Application document posted
      Info IDoc 3 : Application document posted
      Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
      Update PSA ( 2462 Records posted ) : No errors
      Transfer Rules ( 2462 -> 2462 Records ) : No errors
      Update rules ( 2462 -> 2462 Records ) : No errors
      Update ( 0 new / 0 changed ) : Errors occurred
      Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
Saran

Hi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM

No data Exists error while retrieving the data from a table

Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding this

Hi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake....

Error while migrating BLOB data

Similar Messages

Maybe you are looking for