Error while opening the PDF preview

Hi,
While opening the form in the PDF preview, i am getting a pop window with a message saying, 'Cannot find 'c:\.\Adobe Examples\request_de.xml'. Make sure the path or Internet address is correct.'. When i click 'ok' it is giving a blank window. Do i need to install anything for that?
Thanks and Regards,
Giridhar.

hi,
Check u r Adobe version.....
Adobe Reader 7 to 8.1 its preferable.
(or)
Check u r Adobe Lifecycle Designer (ALD).
Adobe Lifecycle Designer 7.1 and above is preferable.
by
Parthasarathi

Similar Messages

  • Facing the Error while opening the PDF Document generated by Adobe Forms

    Hi,
    I have created an Custom Adobe Form and calling this form through a Custom Program and generating the PDF and could able to download on to my desktop but when i am tyring to open it i m facing the below Error.
    "There was an error opening this document. The file is damaged and could not be repaired" .
    Please help me in this regard ASAP.
    Please do find the attached error screen shot.
    Thanks
    Sushil

    Hi Naveen ,
    Have done as per the link but still not opening
    same error.
    I have created a print program and from there want to generate pdf. But it is not working.
    please find the below code : In this i am passing some tables to function module and output is formoutput of type fpformoutput.
    Where do i need to do any changes if required.
    data: lst_opparam     type sfpoutputparams.
       data: lst_docparam    type sfpdocparams.
       data: lfd_fname type funcname.
       data: lrf_cx_root     type ref to cx_root.
       clear: lst_opparam, lst_docparam.
       lst_opparam-getpdf   = 'X'.
       lst_opparam-preview = 'X'.
    *  lst_opparam-nodialog   = 'X'.
       call function 'FP_JOB_OPEN'
         changing
           ie_outputparams       = lst_opparam
      exceptions
        cancel                = 1
        usage_error           = 2
        system_error          = 3
        internal_error        = 4
        others                = 5
       if sy-subrc <> 0.
    * Implement suitable error handling here
       endif.
       try.
           call function 'FP_FUNCTION_MODULE_NAME'
             exporting
               i_name     = 'ZAFGLERC001'
             importing
               e_funcname = lfd_fname.
    *   E_INTERFACE_TYPE           =
    *   EV_FUNCNAME_INBOUND        =
         catch cx_root into lrf_cx_root.
       endtry.
       lst_docparam-langu = 'EN'.
       lst_docparam-country = 'IN'.
    call function lfd_fname      "   '/1BCDWB/SM00000213'
      exporting
        /1bcdwb/docparams        = lst_docparam
        appl                     = 'EREC_ONBRD'
        wa_ztbglerc049           = wa_ztbglerc049
        wa_ztbglerc050           = wa_ztbglerc050
        it_51                    = it_51
        wa_41                    = wa_41
        it_42                    = it_42
        wa_43                    = wa_43
        it_44                    = it_44
        it_45                    = it_45
        it_46                    = it_46
        it_47                    = it_47
        it_48                    = it_48
      importing
        /1bcdwb/formoutput       = formoutput
      exceptions
        usage_error              = 1
        system_error             = 2
        internal_error           = 3
        others                   = 4
    if sy-subrc <> 0.
    * Implement suitable error handling here
    endif.
       call function 'FP_JOB_CLOSE'
    * IMPORTING
    *   E_RESULT             =
    exceptions
      usage_error          = 1
      system_error         = 2
      internal_error       = 3
      others               = 4
       if sy-subrc <> 0.
    * Implement suitable error handling here
       endif.

  • Error while opening the Pdf Attachment  at the time sending mail ..

    Hi Frn's ,
       i am sending a mail with pdf attachment ... but the pdf is not opening ...it is giving error "There was and error opening this document . This file can not be open because it has no page ."
    Please resolve the problem ...below is the code pasted ..
    REPORT  ZPRI_TEST_LDB.
    DATA: it_pdf LIKE tline OCCURS 0 WITH HEADER LINE .
    Spool to PDF conversions
    DATA: gd_spool_nr LIKE tsp01-rqident,
          gd_destination LIKE rlgrap-filename,
          gd_bytecount LIKE tst01-dsize,
          gd_buffer TYPE string.
    DATA:  w_recsize TYPE i.
    DATA: gd_recsize TYPE i.
    DATA: gd_subject   LIKE sodocchgi1-obj_descr,
          it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          gd_sender_type     LIKE soextreci1-adr_typ,
          gd_attachment_desc TYPE so_obj_nam,
          gd_attachment_name TYPE so_obj_des.
    data:     gd_error    TYPE sy-subrc,
          gd_reciever TYPE sy-subrc.
    PARAMETER: p_email1 LIKE somlreci1-receiver
                                        DEFAULT 'abc,
              p_sender LIKE somlreci1-receiver
                                        DEFAULT 'abc'.
    perform write_output .
    perform create_pdf .
    PERFORM process_email .
    FORM WRITE_OUTPUT .
      write:'Listed below are the employees in your area who are due a Performance Appraisal'.
      write:'during the month of May 2009 .A performance appraisal form can be found on-line'.
      write: 'in the MUD template section .The Performance Appraisal is to be completed and' .
      write:'discussed with the employee by the immediate supervisor .Signed forms should be '.
      write: 'returned to the Human Resource Department by May 31,2009 .'.
      skip 2 .
      write: 'employee name' .
      write: 'Job Date' .
      write: 'Date of last appraisal' .
    ENDFORM.                    " WRITE_OUTPUT
    FORM CREATE_PDF .
      DATA:  spoolno LIKE tsp01-rqident.
      DATA : p_repid LIKE sy-repid .
      DATA: v_len  TYPE i , v_len1  TYPE i .
      DATA: v_temp(8) TYPE c .
      DATA: p_uname LIKE sy-uname .
      DATA: it_tsp01 TYPE STANDARD TABLE OF tsp01 WITH HEADER LINE .
    DATA: it_pdf LIKE tline OCCURS 0 WITH HEADER LINE .
      TABLES: tsp01.
      data: var  type c .
    *-- STRUCTURES
      DATA:
        lc_rq2name LIKE tsp01-rq2name.
      DATA:
        mstr_print_parms LIKE pri_params,
        mc_valid(1)      TYPE c,
        mi_bytecount     TYPE i,
        mi_length        TYPE i,
        mi_rqident       LIKE tsp01-rqident.
    *-- INTERNAL TABLES
      DATA:
        mtab_pdf    LIKE tline OCCURS 0 WITH HEADER LINE,
        mc_filename LIKE rlgrap-filename.
    *-- SELECTION SCREEN
      DATA:
        p_linsz LIKE sy-linsz VALUE 132, " Line size
        p_paart LIKE sy-paart VALUE 'X_65_132'.  " Paper Format
    *-- Setup the Print Parmaters
      CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
          authority              = space
          copies                 = '1'
          cover_page             = space
          data_set               = space
          department             = space
          destination            = space
          expiration             = '1'
          immediately            = space
          new_list_id            = 'X'
          no_dialog              = 'X'
          user                   = sy-uname
        IMPORTING
          out_parameters         = mstr_print_parms
          valid                  = mc_valid
        EXCEPTIONS
          archive_info_not_found = 1
          invalid_print_params   = 2
          invalid_archive_params = 3
          OTHERS                 = 4.
    *-- Explicitly set line width, and output format so that
    *-- the PDF conversion comes out OK
      mstr_print_parms-linsz = p_linsz.
      mstr_print_parms-paart = p_paart.
    importing variable value set at first time to restrict the infinite loop .
      IMPORT var FROM MEMORY ID 'abc' .
      var = var + 1 .
      p_uname = sy-uname .
      p_repid = sy-repid .
    *checking variable to restricted scecond time exction of this block of code
      IF var = 1 .
       v_memid = 1 .
        EXPORT var TO MEMORY ID 'abc' .
    start ----p3d(02/13/2009)
    EXPORT it_pernr it_pernr_quali v_memid it_pernr_status
               p_file  p_file1 rb_pres rb_app rb2 TO MEMORY ID 'bcd' .
       EXPORT it_pernr it_pernr_quali v_memid it_pernr_status it_notqualified
                        p_file  p_file1 rb_pres rb_app rb1 rb2 rb3 rb4 TO MEMORY ID 'bcd' .
        EXPORT it_pernr it_pernr_quali v_memid it_pernr_status it_notqualified
                    p_file  p_file1 rb_pres rb_app rb3 rb4 TO MEMORY ID 'bcd' .
    end ----p3d(02/13/2009)
    submitting the spool request
        SUBMIT (p_repid) TO SAP-SPOOL
                         SPOOL PARAMETERS mstr_print_parms
                         WITHOUT SPOOL DYNPRO
                         AND RETURN.
      ENDIF.
      FREE MEMORY ID 'abc'.
      FREE MEMORY ID 'bcd'.
    *Calculating the lenth of report name
      v_len = STRLEN( p_repid ) .
    *consutrucing the database variable  rq2name to search the spool request
      IF v_len >= 9 .
        CONCATENATE p_repid+0(9)
                    p_uname+0(3) INTO lc_rq2name .
      ELSE.
        v_len1 = 9 - v_len .
        DO v_len1 TIMES .
          CONCATENATE v_temp '_' INTO v_temp .
        ENDDO.
        CONCATENATE p_repid v_temp
                    p_uname INTO lc_rq2name .
      ENDIF.
    *selecting the spool request using the above consructed varibale
      SELECT * FROM tsp01 INTO TABLE it_tsp01
              WHERE rq2name = lc_rq2name .
    *sorting the interbla table
      SORT  it_tsp01 BY rqcretime DESCENDING .
    *reading the first spool request
      READ TABLE it_tsp01 INDEX 1.
    *converting the spool request into pdf
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
        EXPORTING
          src_spoolid              = it_tsp01-rqident
         dst_device               = 'LP01'
        TABLES
          pdf                      = it_pdf
        EXCEPTIONS
          err_no_abap_spooljob     = 1
          err_no_spooljob          = 2
          err_no_permission        = 3
          err_conv_not_possible    = 4
          err_bad_destdevice       = 5
          user_cancelled           = 6
          err_spoolerror           = 7
          err_temseerror           = 8
          err_btcjob_open_failed   = 9
          err_btcjob_submit_failed = 10
          err_btcjob_close_failed  = 11
          OTHERS                   = 12.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf.
        TRANSLATE it_pdf USING ' ~'.
        CONCATENATE gd_buffer it_pdf INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att = gd_buffer.
        APPEND it_mess_att.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.                    " CREATE_PDF
    FORM SEND_eMAIL using p_email .
    REFRESH it_mess_bod.
    Default subject matter
      gd_subject         = 'Subject'.
      gd_attachment_desc = 'Attachname'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
      it_mess_bod        = 'Message Body text, line 1'.
      APPEND it_mess_bod.
      it_mess_bod        = 'Message Body text, line 2...'.
      APPEND it_mess_bod.
    If no sender specified - default blank
      IF p_sender EQ space.
        gd_sender_type  = space.
      ELSE.
        gd_sender_type  = 'INT'.
      ENDIF.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_mess_bod
                                          it_mess_att
                                    using p_email
                                          'Example .xls documnet attachment'
                                          'PDF'
                                          gd_attachment_name
                                          gd_attachment_desc
                                          p_sender
                                          gd_sender_type
                                 changing gd_error
                                          gd_reciever.
    ENDFORM.                    " SEND_MAIL
    FORM process_email.
      DESCRIBE TABLE it_mess_att LINES gd_recsize.
      CHECK gd_recsize > 0.
      PERFORM send_email using p_email1 . .
    perform send_email using p_email2.
    ENDFORM.
    FORM send_file_as_email_attachment tables it_message
                                              it_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
    data:   t_packing_list like sopcklsti1 occurs 0 with header line,
            t_contents like solisti1 occurs 0 with header line,
            t_receivers like somlreci1 occurs 0 with header line,
            t_attachment like solisti1 occurs 0 with header line,
            t_object_header like solisti1 occurs 0 with header line,
            w_cnt type i,
            w_sent_all(1) type c,
            w_doc_data like sodocchgi1.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = it_attach[].
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    Thanks and Regards ..
    Priyank

    hi this is the part of code ...
    PERFORM process_email .
    CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf.
        TRANSLATE it_pdf USING ' ~'.
        CONCATENATE gd_buffer it_pdf INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att = gd_buffer.
        APPEND it_mess_att.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.                    " CREATE_PDF
    FORM process_email.
      DESCRIBE TABLE it_mess_att LINES gd_recsize.
      CHECK gd_recsize > 0.
      PERFORM send_email using p_email1 . .
    perform send_email using p_email2.
    ENDFORM.
    FORM SEND_eMAIL using p_email .
    REFRESH it_mess_bod.
    Default subject matter
      gd_subject         = 'Subject'.
      gd_attachment_desc = 'Attachname'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
      it_mess_bod        = 'Message Body text, line 1'.
      APPEND it_mess_bod.
      it_mess_bod        = 'Message Body text, line 2...'.
      APPEND it_mess_bod.
    If no sender specified - default blank
      IF p_sender EQ space.
        gd_sender_type  = space.
      ELSE.
        gd_sender_type  = 'INT'.
      ENDIF.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_mess_bod
                                          it_mess_att
                                    using p_email
                                          'Example .xls documnet attachment'
                                          'PDF'
                                          gd_attachment_name
                                          gd_attachment_desc
                                          p_sender
                                          gd_sender_type
                                 changing gd_error
                                          gd_reciever.
    ENDFORM.                    " SEND_MAIL
    FORM send_file_as_email_attachment tables it_message
                                              it_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
    data:   t_packing_list like sopcklsti1 occurs 0 with header line,
            t_contents like solisti1 occurs 0 with header line,
            t_receivers like somlreci1 occurs 0 with header line,
            t_attachment like solisti1 occurs 0 with header line,
            t_object_header like solisti1 occurs 0 with header line,
            w_cnt type i,
            w_sent_all(1) type c,
            w_doc_data like sodocchgi1.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = it_attach[].
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.

  • Error while opening the PDF attachment

    HI SDN's
    I have to send order confirmation thru mail as a pdf attachment as soon as order has been saved.
    I have written the code and assigned to output type.
    Here I am getting an error opening a converted pdf file with Adobe Reader
    The error message reads:
    Adobe Reader could not open "filename.PDF" because it is either not a supported file type or because the file has been corrupted (for example, it was sent as an email attachment and wasn't correctly decoded).
    Any help would be appreciated.
    Thanks in advance
    VR

    hello, i have the same problem as VR's. The pdf file sent to my email is not able to open. You mentioned that this is only supported by early releases of Adobe. But anyhow, I followed your advice to have my spool converted to PDF, instead of OTF to PDF. But I get this error: Spool request 23595 contains no ABAP list data.
    What exactly my transaction does is that, it makes use of a sapscript layout via VL02N using an output type. I retrieve the OTF data in CLOSE_FORM function module. OTF is then converted to PDF via SX_OBJECT_CONVERT_OTF_PDF, then send via email through SO_NEW_DOCUMENT_ATT_SEND_API1.
    When I view the sent PDF file in my email, It cannot be opened.
    I would appreciate your help guys! thank you very much.

  • WebInterface Server - Error while opening the PDF file

    Hello,
    We are using webinterface to display the MSDS genearated.
    Our customers use the link provided to them for displaying the msds.
    We imported a few MSDS ( CG36 ), which are in PDF format & displayed successfully on the webinterface server.
    However the newly generated MSDS ( Create Report ) from SAP EH&S system are not getting displayed on the webinterface server. We are getting following error message:
    Error reading resulitng document from filesystem. Class:
    COM.td.ehswww.results.EhsDocument.
    Method:getResolvedDocument().This error could have been caused by a misconfigured filter.ini.
    We checked and found that the filter.ini file is same on both quality & production system.
    We are able to generate & display the report successfully on quality webinterface server.
    Problem only appears on the production webinterface server.
    We also tried to search for the SAP notes on this issue.
    But we could not find out any relevant note for our issue.
    Any help in this regarding is highly appreciated.
    Thanks & Regards,
    Aarohi

    Hello Sebastian,
    Thank you very much for your help.
    We checked on both quality & production webinterface server.
    The Tomcat service is not executed with any specific user.
    The system is working fine on quality , we are getting errors only on the production.
    We also identified a strange behavior on the production web interface server.
    We are able to see files under following menu path:
    There are error files getting generated.
    I guess these error files are getting generated while converting the rtf file to pdf file.
    The resultant PDF file is not getting generated and hence system is giving the error on the webpage.
    Can you guide us as to why these error files are getting generated .? What can be the root cause of this issue.? and How to prevent this.?
    Again thanks a lot for your help.
    Best Regards,
    Aarohi

  • Getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1. It is creating issue to convert PDF into TIFF. Please provide the solution ASAP

    Hello All,
    I am getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1.
    Also, it is creating issue to convert PDF into TIFF. Please provide the solution ASAP.

    I am using Adobe reader XI. When i open PDF it gives "OUT of memory" error after scrolling PDF gives another alert "Insufficient data for an image". after clicking both alerts it loads full data of PDF. It is not happening with all PDFs. couple of PDFs are facing this issue. Because of this error my software is not able to print these PDFS into TIFF. My OS in window7*64. I tried it on win2012R2 and XP. Same issue is generating there.
    It has become critical issue for my production.

  • Problem while opening the PDF

    Hi All,
    Iam having an issue while opening the PDF-Attachment in which iam sending it as attachment to the mail.While opening the PDF iam getting the error that "Aodbe Reader could not open the document because it is either not a supported file type or because the file has been damaged(for example,it was sent as an email attachment and was'nt correctly decoded)".
    The function-module "SO_NEW_DOCUMENT_ATT_SEND_API1" is getting use to send the attachment.
    First iam converting the internal table data into PDF and then am sending the mail with PDF-attchment.
    Thanks,
    Asmitha.

    Even i had a smilar problem. The reason is perhaps the data in internal table doesnt get converted into PDF corectly. In my case i had to convert into PDF and download on local machine. Attching below code for it.Maybe u can get pointers to your problem.
      REPORT sy-repid
           NO STANDARD PAGE HEADING
           LINE-COUNT 74
           LINE-SIZE  200
           MESSAGE-ID zz.
      PARAMETERS : pcfile LIKE rlgrap-filename LOWER CASE.
      DATA :textlines LIKE tline OCCURS 100 WITH HEADER LINE.
      DATA otf LIKE itcoo OCCURS 1000 WITH HEADER LINE.
      DATA it_lines LIKE tline OCCURS 100 WITH HEADER LINE.
      DATA options LIKE itcpo.
      DATA header LIKE thead.
      DATA result LIKE itcpp.
      DATA: bin_filesize TYPE i.
      DATA: filesize TYPE i,
      convcount TYPE i,
      cancel(1).
      AT SELECTION-SCREEN ON VALUE-REQUEST FOR pcfile.
        CALL FUNCTION 'WS_FILENAME_GET'
          EXPORTING
            mask     = ',*.*,*.*.'
          IMPORTING
            filename = pcfile
          EXCEPTIONS
            OTHERS   = 1.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      START-OF-SELECTION.
        DATA : BEGIN OF itab OCCURS 0,
                matnr TYPE mara-matnr,
                END OF itab.
        SELECT matnr FROM mara UP TO 10 ROWS INTO TABLE itab.
        LOOP AT itab.
          textlines-tdformat = '*'.
          textlines-tdline = itab-matnr.       APPEND textlines.
        ENDLOOP.
        options-tdgetotf = 'X'.
        options-tdnoprev = 'X'.
        CALL FUNCTION 'PRINT_TEXT'
          EXPORTING
            dialog                   = ' '
            header                   = header
            OPTIONS                  = options
          IMPORTING
            RESULT                   = RESULT
          tables
            lines                    = textlines
            otfdata                  = otf
          EXCEPTIONS
            canceled                 = 1
            device                   = 2
            form                     = 3
            OPTIONS                  = 4
            unclosed                 = 5
            unknown                  = 6
            format                   = 7
            textformat               = 8
            communication            = 9
            bad_pageformat_for_print = 10
            OTHERS                   = 11.
        IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        CALL FUNCTION 'CONVERT_OTF'
          EXPORTING
            format                = 'PDF'
          IMPORTING
            bin_filesize          = filesize
          TABLES
            otf                   = otf
            lines                 = it_lines
          EXCEPTIONS
            err_conv_not_possible = 1
            err_bad_otf           = 2.
        DATA : g_file TYPE string.
        g_file = pcfile.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            bin_filesize            = bin_filesize
            filename                = g_file
            filetype                = 'BIN'
          TABLES
            data_tab                = it_lines
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            no_authority            = 5
            unknown_error           = 6.
    Regards,
    Mansi

  • Error while opening the receipt entry form in AR module.

    Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
    forms , we are getting the error message as :
    NO_DATA_FOUND
    FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
    Kindly help in resolving.
    We have ERP version of 11.5.10.2

    Please also see the following docs.
    Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
    FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
    APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
    ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
    Thanks,
    Hussein

  • Error while opening the backup information fom Maxdb

    Hello All,
    I am getting the below error while opening the backup information from Maxdb.
    Backup history file /sapdb/data/wrk/<sid>/dbm.knl corrected in line <xxxx> ; 2012-02-21 07:30:25 can not be convert in to a signed 32 bit integer value
    The full line is as below from the dbm.knl file:
    4F4337C5014C|LOG_000030571|SAVE WARM|2012-02-21 07:16:03|2012-02-21 07:20:49|2012-02-21 07:20:53|2012-02-21 07:21:04|2605155691|2605244F433A01014E|LOG_000030573|SAVE WARM|2012-02-21 07:26:09|2012-02-21 07:30:24|2012-02-21 07:30:25|2012-02-21 07:30:41|2605326357|2605411689|   |<SID>_LOG                                                         |     85344|         0|         0|                                        |
    I am able to open and check this line in the file dbm.knl ; But, i am not getting why this error is occurring while opening the backup information from Maxdb. I am able to view the backup logs through LC10.
    Currently i am getting this error and when i am click on cancel (or ok) getting the blank page.  I am not able to view the backup logs form Maxdb.
    Please give me some hint to resolve this.
    Regards,
    Nagendra.

    Hi,
    Use below procedure
    1. Go to /sapdb/SRD/data/wrk
    2. cp -rp dbm_knl dbm_knl_OLD
    3. vi +<Line in which the corruption occured> dbm.knl
    see there must be a corruption in the given line and it will specified with a green color
    delete that part and make the format as per the above line
    4. save the file
    5. execute the procedure again from Database studio or Database Manager
    (Note: Make sure that you have taken the backup first of dbm.knl file Because any extra entry may cause another corruption)
    (FYI : This file is only log file of successful backups and returns the return-code)
    Regards,
    Paramvirsinh Jetawat
    SAP BASIS Consultant

  • Error while opening the BO report

    Dear Experts,
    Am getting following error while opening the reports through Xcelsius.You cannot amke a connection to the BusinessObjects web service ( LO 02010)
    Failed to get the document information. (LO 26315)
    Some objects are no longer available in the universe .See your BO admin ( Error : WIS 00001)
    Actually am the BO administrator , Yesterday I 've changed license key for Xcelsius and BO Enterprise...

    Hi ,
    You can view the following URl ,which may be helpful for you.
      Live office excel error
    -Thanks,

  • Error while opening the application help

    Hello,
    We are trying to open the application help from the R/3. It is giving
    us the follwoing error.
    This is linked to the knowledge warehouse server 6.20.
    Error:
    SAP Internet Knowledge Server
    The IKS cannot display the page you asked for.
    Please contact the administrator if this problem persists.
    Additional infomation:
    RFC Error: System exception raised, connection closed (SIW_IKS_VAR_GET)
    RfcRc: <3>, ErrorInfo:
    The confuguration looks fine as per the note # 381266.
    The help is working fine previously.
    Thanks in advance.
    Best regards,
    Madhav.

    Hi Arun,
    Error due to incorrect installation of life cycle designer.
    check the below links for solution.. ( same issue ).
    Error Message "Error while Opening the Document"
    Error - Adobe Live Cycle designer
    Regards
    Srinivas

  • Error while opening the file store file "WLS_DIAGNOSTICS000000.DAT".....

    I have a WL 9.2.1 running on Sun solaris o/s .....it is failing to start thowing the following exception
    <Mar 19, 2009 5:21:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was a
    n error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
    at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS0
    00000.DAT"
    at weblogic.store.io.file.Heap.open(Heap.java:166)
    at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
    at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:350)
    at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
    at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
    ... 4 more
    Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:213)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:103)
    at weblogic.store.io.file.Heap.open(Heap.java:164)
    ... 9 more
    Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
    at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
    at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:51)
    at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:138)
    at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:112)
    at weblogic.store.io.file.StoreFile.open(StoreFile.java:142)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:95)
    ... 10 more
    i went ahead and checkd the file and the privs on the file they look correct -rw-r--r-- ...but when i just restart it ..it starts with no errors the next time......What could be the issue.....please help
    Then only reason i could think of is the size of the file is 35MB now...is this the problem....if yes....is there a way to automaticaly rotate this file ....

    The root cause appears to be right in the stack trace:
    Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11I think this indicates that either the file was either locked (because another instance of WebLogic had it opened), or that the file was unavailable for some reason. WebLogic locks files as a safety precaution to prevent misconfigured setups (multiple domains sharing the same directory and store name) from attempting to share the same file.
    I don't think that this message necessarily means there is a file corruption.
    As for rotation, the file store automatically adds new files as needed (I think its 1 file for every 2GB of data). The "diagnostics" file store is generated by the optional diagnostics feature, and I think that this feature has options for controlling the amount of stored data.
    Tom

  • Error while opening the database.--urgent---pls help...

    Hi,
    Got the below error while opening the database.
    Database version is :10.1.0.4.0
    database is in noarchive log mode.
    the database is coming in to no-mount state and mount state quite easily but not able to open the database.
    Got the below error while opening the database.
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    Mon Sep 29 15:32:39 2008
    Errors in file /xxx/udump/aaa_ora_18737.trc:
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    Mon Sep 29 15:32:41 2008
    DEBUG: Replaying xcb 0xc0000000350c1c18, pmd 0xc0000000353b21f0 for failed op 8
    Doing block recovery for file 2 block 9483
    No block recovery was needed.
    on Sep 29 15:34:01 2008
    Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    Mon Sep 29 15:34:04 2008
    Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
    ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
    PMON: terminating instance due to error 472
    Instance terminated by PMON, pid = 18723
    Please help me....................

    Hi..
    This ORA-600 refers to a mismatch has been detected between Redo records and rollback (Undo) records.Is better to lock a call with oracle support.Secondly, apply latest patch on the DB.
    I had expereiced the same error, but my DB was in open mode, so i created a new undo tablespace and changed the undo_tablespace parameter and it worked.
    Anand

  • Error Message "Error while Opening the Document"

    Hi Friends,
    I have a problem while opening the SFP transaction and Clicking on the Layout Tab the SAP System is giving an error message saying "Error while Opening the Document".
    I have tried testing on several systems like IDES, ERP, Retail systems. But it is giving me same error. Is this the problem with ADOBE LIVECYCLE DESIGNER?
    And when I click on the Performance Assistant it has given me some information:
    Error while opening document
    Message no. SOFFICEINTEGRATION143
    Diagnosis
    An error occurred in the desktop application while opening a document.
    Friends can you help me in solving this problem.
    Thanking yoy in Advance
    Pradeep Goli

    Pradeep,
    Maybe Live Cycle Designer has not been uninstalled correctly from your system. So goto the following lcaotions and remove the Designer folder if you find them:-
    C:\Program Files\Adobe
    C:\Documents and Settings\<your-username>\Application Data\Adobe\
    Alternatively try installing Live Cycle Designer on some other machine in your network and see if you encounter the same error.
    Similar thread for reference :  Error - Adobe Live Cycle designer
    Chintan

  • Getting error while opening the workbook

    Hi,
    I am getting one error while opening the workbook.
    Error: The Dependency "Join condition" is not found in EUL.
    Basically, the workbook was working fine. But we droped some joins and recreated new joins. After this change, our worknbooks starts giving this error.
    Please advice.
    Where i can get the dependency information in EUL?
    Thanks, rajesh

    This has to be one of the most 'pain in the butt' errors you can get (well ... 0000 - normal successful completion is another).
    Although I've seen this one for years, these days I'm finding many more examples that are happening to me with this (simply the environment I'm in) and in many cases, requires rebuilding the workbook again. For example, sometimes I put in the join that I think it's having a problem with, but the existing workbook simply won't run. Recreating the workbook exactly the same gets it to work properly. Maybe it's a 4.x thing (version I'm on these days) ... but just a warning that you may well have to rebuild.
    Russ

Maybe you are looking for

  • Unable to view Dynamic Prompts in Crystal Reports through JSP

    Hi, We are using Crystal Reports, SQL Server and Java in our application. We are using JSP to access Crystal Reports from another machine, get them as "ReportClientDocument" objects and then display them using "CrystalReportInteractiveViewer" object.

  • UPGRADE REQUEST ACROBAT X1 standard 10.1.6 to 11.x

    A week ago I just bought a new laptop with Acrobat X1 Standard 10.1.6 installed (OEM). I'd like to upgrade to 11.x. How can this be done? The laptop came with the 10.1.6 version pre-installed and the install CD was not included, just the "certificate

  • Trace File in pro*c program !!

    Hiiii, I want to set the trcae file in my pro*c program but unable to do so. can anyone here help me out ... also i would like to know whether we can generate trace file for remote database connections, in my client program. I was using the syntax as

  • The color on my iPhone went from positive to negative.....help

    The color on my iPhone changed from positive to negative.......help

  • How to unblock blocked plug in?

    When ever I want to see a video I get a message blocked plug in.  I have downloaded flash player many times and nothing happens. Please help.  Thank you.