Error while overlaying 2 PDF documents
Hi,
When i try to overlay two PDF documents using assembler service an error message comes up saying "PDFM_S13003: Cannot overlay pages from source PDF document "doc1.pdf" which contains XFA forms". How can i remove this XFA form content from the PDF or change it to acro form
Try to use the NoXFA tag in your DDX.
Jasmin
Similar Messages
-
Error while exporting to PDF document in OBIEE 11g
Hi
In OBIEE 11g we are facing an issue regarding exporting a few reports to pdf. It is resulting in following error: "Error generating PDF document".
The reports are placed on a dashboard which has a prompt too. However, when we remove the prompts, the export is working fine.
We will really appreciate any help in this regard.
Thanks.Hi,
Looks like this is a sort of known bug with PDF creator in 11g. Try implementing the below solution:
To configure the Javahost service, edit the Javahost service configuration parameters in the
instanceconfig.xml file. The parameters are
identified by their relative path starting from the /WebConfig/ServerInstance node
For example:
<JavaHost>
<PDF>
<InputStreamLimitInKB>50000</InputStreamLimitInKB>
</PDF>
</JavaHost>
After changes restart Siebel Analytics Java Host and Siebel Analytics Web services
If it doesn't work try to create same report in xml publisher as presentations services in obiee has limited capacities in printing out reports.
Refer to this thread for related useful information: Error in creating a PDF
Hope it helps.
Thanks,
-Amith. -
Facing the Error while opening the PDF Document generated by Adobe Forms
Hi,
I have created an Custom Adobe Form and calling this form through a Custom Program and generating the PDF and could able to download on to my desktop but when i am tyring to open it i m facing the below Error.
"There was an error opening this document. The file is damaged and could not be repaired" .
Please help me in this regard ASAP.
Please do find the attached error screen shot.
Thanks
SushilHi Naveen ,
Have done as per the link but still not opening
same error.
I have created a print program and from there want to generate pdf. But it is not working.
please find the below code : In this i am passing some tables to function module and output is formoutput of type fpformoutput.
Where do i need to do any changes if required.
data: lst_opparam type sfpoutputparams.
data: lst_docparam type sfpdocparams.
data: lfd_fname type funcname.
data: lrf_cx_root type ref to cx_root.
clear: lst_opparam, lst_docparam.
lst_opparam-getpdf = 'X'.
lst_opparam-preview = 'X'.
* lst_opparam-nodialog = 'X'.
call function 'FP_JOB_OPEN'
changing
ie_outputparams = lst_opparam
exceptions
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
others = 5
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
try.
call function 'FP_FUNCTION_MODULE_NAME'
exporting
i_name = 'ZAFGLERC001'
importing
e_funcname = lfd_fname.
* E_INTERFACE_TYPE =
* EV_FUNCNAME_INBOUND =
catch cx_root into lrf_cx_root.
endtry.
lst_docparam-langu = 'EN'.
lst_docparam-country = 'IN'.
call function lfd_fname " '/1BCDWB/SM00000213'
exporting
/1bcdwb/docparams = lst_docparam
appl = 'EREC_ONBRD'
wa_ztbglerc049 = wa_ztbglerc049
wa_ztbglerc050 = wa_ztbglerc050
it_51 = it_51
wa_41 = wa_41
it_42 = it_42
wa_43 = wa_43
it_44 = it_44
it_45 = it_45
it_46 = it_46
it_47 = it_47
it_48 = it_48
importing
/1bcdwb/formoutput = formoutput
exceptions
usage_error = 1
system_error = 2
internal_error = 3
others = 4
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
call function 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
exceptions
usage_error = 1
system_error = 2
internal_error = 3
others = 4
if sy-subrc <> 0.
* Implement suitable error handling here
endif. -
Hi Guys,
I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
Maximum Size set in Our SYSTEM is :9765MB.
Approx size of the Document tried is more then 300MB.
Appreciate your help on this.
Regards
TarunHi Tarun,
Please check the below system properties using system user login
attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
attachments.upload.enable.buyers- " Enable/Disable uploading of attachments by internal users"
Also Please check with other attachment, contracts related properties in the System.
Let me know if this helps.
Thanks,
Raj. -
Hello,
We are on HFM 11.1.2.1.103 and financial reports 11.1.2.1.00 and I am having an issue when running a report batch. I have a batch that I run each month which contains a few reports which are emailed out to users. For some reason, the second time the batch runs on one of the reports for a different entity (using bursting on the entity) I get the below error message.
Error while saving as PDF
Index: 3, Size: 3
Any thoughts? The email goes out fine and the other reports are fine.
Thanks,
JasonCheck KM article id 1504257.1.
It says following solution :
1. On the FR server, navigate to Oracle \ Middleware \ EPMSystem11R1 \ products \ financialreporting \ bin.
2. Double-click FRConfig.cmd.
3. When the Java window (Java Monitoring & Management Console) pops up, click on the MBeans tab.
4. Expand com.hyperion > Financial Reporting > Attributes.
5. Locate the PrintServers entry. Remove any invalid server names from the Value field.
6. Stop and start the Hyperion Financial Reporting Web Application. -
Commit error while transferring Sales order Document to GTS
Hello,
We faced a transfer error while transferring sales order document to GTS.
When I debugged the code function /SAPSLL/API_6800_SYNCH is called. In this function, /SAPSLL/CUHD_MAINTAIN_SINGLE is called with parameter lv_no_commit = 'X'. When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.) In debug mode I set the value of lv_no_commit to space, and then it works. It creates the GTS document.
We are also transferring billing documents and it works fine. When I checked what is the difference between transferring sales order document and transferring Billing document, I saw that in the transferring billing document there is another function is called /SAPSLL/API_6800_CSD_SYNCH, and it's calling parameters(in background, as seperate unit) are different from calling parameters of /SAPSLL/API_6800_SYNCH. You can see the difference below.
For sales document transfer :
CALL FUNCTION '/SAPSLL/API_6800_SYNCH'
DESTINATION cs_transfer-rfc_dest
For billing document transfer :
CALL FUNCTION '/SAPSLL/API_6800_CSD_SYNCH'
IN BACKGROUND TASK
DESTINATION cs_transfer-rfc_dest
AS SEPARATE UNIT
So my question is, do you think is it a sap standard program error, or is there any suitable settings in the customizing or SM59 to fix this error?
Thanks in advance
Serhat
Edited by: Serhat Dirihan on Jan 22, 2009 11:46 AMDear Serhat,
I don't think this is an RFC problem or an error. But you wrote:
When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
Balazs -
Error While Releasing the Billing Document Msg No. KE/AD 243
I am getting error while releasing the billing document
Error No KE/AD 243
This error comes in particular billing document only others are posted correctly.
Rgds
DhirajDear Anil
We had applied EHP3 enhancement, before EHP3 is working fine with no transfer sign assignment but after EHP 3 it gives the error and not in all billing document but in particular document only. so i think there is no changes required in KE4I.
Rgds
Dhiraj -
ERROR WHILE GENERATING THE PDF
HI gurus,
We are trying to publish BI reports in the Portal server as Iviews.
In the portal system, when I am clicking the PRINT VERSION button for the
CO cost center (area): Plan/actual: Quarterly iview, its giving the PDF file,
thats well and good.
<b>But when if I am doing the same thing for other iviews, for example: say the iview (COcost center range: Transaction Drill-down).
I am getting the ERROR WHILE GENERATING THE PDF</b>
The question is : <i>its working for some standard iviews and giving error message to other std. iviews.</i>
Please suggest how to resolve this issue.
Regards,
PrasadDear Prasad,
Did you resolve your problem, I have the similar one:
I need to print report made in BEx Report Designer and executed on Portal, but when I press Print Version button I am getting next message:
Error while generating PDF
Any information is much appreciated
Thanks in advance and best regards
Vladimir -
Error while transferring Forwarding settlement document to ERP Billing
Hi Experts,
My forwarding settlement document is consistent.
All the basic customizing in SAP ERP, TM has been completed as follows, but getting error while transferring forwarding settlement document to ERP billing (Ref. 1st screenshot).
I am using SAVE AND TRANSFER button to send the document to ERP, also same error is displaying while using PREVIEW INVOICE button (Ref.2nd screenshot)
Please suggest if I missed anything to send forwarding settlement document to ERP.
Customizing settings for transferring Forwarding settlement document to SAP ERP.
1. In SD Billing all condition types has been maintained, pricing procedure determination configured.
2. In SAP ERP SD condition types mapped to TM charge types using following path.
Integration with other sap components - Transportation management - Invoice integration - Billing - Definition for transportation charge elements - Define charge types.
3. Assignment of charge types in ERPSD
4. Define charge category, subcategory codes
5. Mapped ERP SD, TM sales organization with logical TM system, sales area, Order type, Billing type, Pricing procedure
6. Output types determination configured for ERP Billing in SDDear Serhat,
I don't think this is an RFC problem or an error. But you wrote:
When I checked why its value is 'X', I saw that if the RFC destination and the current system are the same, then lv_no_commit = 'X', (means if the R3 and the GTS are in the same server, same client.)
It is impossible to have GTS and R/3 on the same system and same client. At least the client should be different. So try to check why the call is performed like that.
Balazs -
While creating a PDF document using Adobe Acrobat 9 Pro, it generates additional blank pages. How do I resolve this issue?
I might make a wild guess that you are using WORD and have used hard page breaks. If that is the case, then likely what happens is when you print to PDF the document is being reflowed to match the printer and the forced page break may end up on the next page and be forcing a second page. Just a guess.
-
Encountered error while updating the payment document
Hi Guys,
I encountered an error while updating the payment document of one of our bank account. See below error message:
Error: Unable to lock the record. Cause: The record is being modified by another user
thanks,
gracieHi Vikas,
Repeat the changes you are trying to make one step at a time and make sure you click on update in both the series screen and the document numbers screen every time.
I've faced this issue and doing this helped.
Regards,
Hamsa -
Error while constructing multi-XML document (Multi Mapping)
Hi,
We are using Java mapping to split the messages and the same maping has been called in the Enchanced interface determination. The Jave mapping is executing successfully when we run in the Test tab of the interface mapping.
But we are getting error "Error while constructing multi-XML document", when we execute scenario from Runtime work bench or Test Configuration.
Could you advise whether we need to do any extra setting to execute the java mapping in the Enhanced Interface Determination.
Thanks,
Krishnaraju.
Edited by: krishnaraju Mudunuri on Jan 9, 2010 4:13 PMrefer - http://wiki.sdn.sap.com/wiki/display/Java/MultiMappingwithJavaandXSLTmappings
you need to have the messages tag. -
Error - "not a valid pdf document. it cannot be opened"
I am getting this error message when opening PSE. It says "This is not a valid Portable Document File (PDF) document. It cannot be opened." Needing help asap! Thanks!
Quit PSE. Then go to your username>library>preferences and delete:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements < version number > Paths
Adobe Photoshop Elements < version number > Settings
In 10.7 and higher that library is hidden. To see it, option click the Go menu in the Finder and it will appear below the little house for your user account. Also in 10.7 and up, while you're in there go to the saved application states folder and delete any for PSE.
Repair permissions and try again. -
Error while resetting a cleared document
Hi everyone,
I am getting an error while resetting a cleared invoicing document 'Document xxxxxxxxxxx with origin R4 can not be reversed'. Please guide me how can we reset the clearing of this document.
Thanks and RegardsHi,
You need to reset all clearing for the corresponding FICA document for the print document.
Reset the clearing for the document no. mentioned in the output for EA13 execution.
You need to reset all the clearing for the document, before reversing the same.
To get all the clearing document, go to DFKKOP table, enter the FICA document no. (for the print document on FPL9). Get all AUGBL documents,
Alternatively, you can go on to FPL9 screen, double click on the consumption document, in the basic data you will see the clearing date (if it is cleared), expand the view their (click on + sign), you will se the clearing document no,
Pass the above clearing document no, to FP07, and once all the clearing is reset for the invoice, you can reverse the corresponding invoice through EA13.
Regards,
Rajesh Popat -
Error while opening a Pdf in Acrobat 9.3.4
Hi
Am getting the below error message while opening any pdf on Citrix (built on Windows 2003 Server) with Acrobat 9.3.4.
Has anyone else also seen the same? and how to resolve the same?Update:
Opened the Pdf and found out that the certified signature has become invalid.
Maybe you are looking for
-
Best way to develop a BI Publisher Report
Dear All, which is the best way to develop a XML/BI publisher report? 1) Using a RDF for fetching data using data group 2) Using a Data Template 3) Writing PLSQL code 4) Using BI Publisher Enterprise In R12 , all seeded reports are XML using PLSQL co
-
I have recently updated my phone and am attempting to sync it. I got the error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone". I deleted the backup, restarted my computer, and even res
-
Can't purchase Mountain Lion. Upgraded my memory and OSX. I have a black Macbook (2009) will it work?
-
Simulating DNG Profile changes in PSD file
Hello everyone, I have a RAW file and applied Adobe's default DNG Profile (via the Camera Calibration panel in Lightroom 2.6) and converted it to a PSD file so I can retouch the photo via Photoshop CS3. After hours of retouching, I now want to apply
-
Sending a copy of a photo within iPhoto
How do you send a copy of a photo, stored within iphoto, to someone via e-mail, as an attachment, so that it can be printed by them? I want to send the physical copy of the photo, not just a picture within the email.