Error while parking MIRO invoice

Hi All,
Could anyone please help with the error while parking the invoice through MIR7 :
"Return code 8 is not permitted with Badi fagl_period_check"
Thanks,
SKE

Hi SKE,
Could you please apply the note 1240979 to solve the error you are receiving? It should resolve it.
Best Regards,
Vanessa.

Similar Messages

Error while raising a invoice using VF01

Hi,
I am getting an error while raising a invoice using VF01.
Error as follows
RV_MESSAGE_UPDATE
Update was terminated
System ID....   TIP
Client.......   300
User.....   user1
Transaction..   VF01
Update key...   E66E6454075548D8922BAC091E81F0CB
Generated....   18.07.2007, 18:57:38
Completed....   18.07.2007, 18:57:38
Error info...   TD 443: WRITE_FORM
Pls help
Points will be rewarded.
Thanks

Hi,
This is an ABAP short dump. If you go through the error log, there will be a section where in you can see > What caused the problem.
Try to analyze this log and you can find a solution. Probably, you can also check whether there is any OSS note with this error message.
Thanks
Murali.

Error while creating Excise Invoice

Hi All,
Can any one help me on CIN?
I am getting one error while creating "Excise Invoice [T.code J1ILN]" i.e. "System failure during locking GL account Cocode by 13113910"
Regards
Chowdary

Dear Raghavendra
Please make a try with the following but I am not sure whether it will solve your problem.
Go to FS00, give the G/L account which has the problem and select "Control Data" tab. Here punch as asterisk in the field "Tax category" and save.
Now try to create the excise invoice.
Thanks
G. Lakshmipathi

Error while releasing an invoice for accounting.

Hi Experts,
I am encountering an error while releasing an invoice for accounting. The error displayed is 'error in transaction currency'. Please help me out with this.
Regards,
Sunita

Hi Rish,
Simply go to FS00 and click on edit cost element and for CElm Category give some input based on the G/L account type.
You might have to seek help of an FI consultant to do so.
Also in KA01 create this G/L account as a cost element against your controlling area assigned to your Chart of Accounts, you can do so by clicking on Extra's tab in transaction KA01.
Just let me know if it works.
Reward if helpful.
Regards
Ravi

8I 681 Error While Creating Excise Invoice

Dear All,
Am getting error 8I 681 error while creating excise invoice,when i analysed since in the document flow the delivery document is not there, only J delivery will be allowed in creating excise invoice.
Our client wants item level milestone,so in oder to activate that i have assigned the billing plan in the item category.But when i assighn the billing plan the system will not allow to put the billing relavance delivery relavant.So i made oder relavan in the billing relavance.So i create an oder and with that reference delivery.But when i create billing i have to refer the oder number,since in the item ctegory i have made oder relavant billing.So the result is in the billing document flow the delivery document is not flowing.Henceforth i could not be able to create J1IN.
But this was not happening in the sand box,but only in the quality since it is superior.when we debugged we found only J(Delivery) is allowed to create excise invoice.
Please help me to solve this issue,is there any possiblity to make the delivery document flow in the billing document.If it is done it 100%possible to create the excise invoice.
Please share your ideas to solve this issue.....
Best Regards,
Venugopal

Dear Lakshmi,
Thanks for your Prompt reply...
In our case delivery is there,but when we create the invoice the delivery document is not flowing,since in the itemcategory oder relavant billing.We have billing milestone at the item level,for activating that i have to make the billing relavance as I.Other wise the system is not allowing me to select delivery relavant and billing plan.Please help me to make the delivery document flow in the billing document.Then this 8I error will be solved.
I have alsochecked the update document flow,everything is perfect.
Regards,
Venugopal

Assign CO object error while cancelling excise invoice

Dear Gurus,
I am getting following error, while cancelling excise invoice. I was able to post the excise documents without this error.
Account N870 requires an assignment to CO object. Message no.KI235
Kindly help me to resolve this issue.
Regards
Ranga

If you click on the long text of your error message, you will see an explanation of how to fix the error there.
Or just put an entry into table OKB9 for the GL Account N870

Error while posting MIRO - PO is changed

Dear Guru's
I am getting an error message
PO is changed
Message no. ZFI_INWARD_REG026
while posting the invoice using Miro ..
I know this custom message But how to debug /clear this error message. I do checked in the OMRM - Error message is not maintained in that.
guide me to solve this..
Regards
Anandh

Hi
I have found the error message under Enhancement - Classic BADI (impl) - IF_EX_INVOICE_UPDATE~CHANGE_BEFORE_UPDATE method
IF wa_ti_mrmrseg-ebeln IS NOT INITIAL.
    IF wa_ti_mrmrseg-ebeln NE wa_inward_reg_no-po_number.
      MESSAGE e026(zfi_inward_reg).
    ENDIF.
ENDIF.
--- How to find the reason for triggering this message and how to resolve this issue.
regards
anand

Error while posting Excise Invoice

Hi Experts,
I have captured incoming excise invoice for an Import PO of Asset material.
GR has been made.
Also partial payment to vendor has been done through MIRO.
During check it do not show any ERROR message
While posting Excise invoice , error message is displayed "ACCOUNTING DOCUMENTS NOT GENERATED"
and immediately current session is closed
How to solve the problem?
Regards
Jai

Hi,
Import cycle :-
1. MIRO-Bill of Entry
2. Excise Invoice capture
3. Goods Receipt
4. Excise Invoice posting
5. MIRO -Vendor settelement
Tcode you used for capturing excise invoice - j1iex
posting the excise invoice. j1iex
Thanks
jai

Account dertermination error while doing MIRO for third party PO

Hello,
This is regarding error message while doing MIRO (IR)
There is already a PO in the system with item category S ( Third Party ) &
Acc assignment object u2013 C (Sales order).
For this PO , I could find 10 invoices already posted in the system.
Between when these invoices were posted , there were some changes done to the PO.
But even after those changes , many invoices were posted in the system,
But now , when I try to post the invoice , I am getting the below error message.
the error message is ** Account determination for entry SKPL WRX 0002 _ 1020 not possible** while posting.
Message no. M8147
Diagnosis
The system did not find an account for this transaction. This means that the account determination for key SKPL WRX 0002 _ 1020 is not maintained in MM Customizing (Valuation). The key is made up of:
u2022 Chart of account
u2022 Transaction key (= Posting transaction)
u2022 Valuation grouping code
u2022 Account grouping code
u2022 Valuation class
System Response
The system cannot update a G/L account for this transaction. You cannot post the transaction.
Procedure
Contact your system administrator.
If you have the authorization, check the Account determination in Customizing for Valuation.
Proceed
Note
The relevant posting transaction can be found in Table T030A.
I have checked the entry in OMWD, where valuation grouping code is maintained against the valuation area & company code.
PLEASE SUGGEST ME SOME SOLUTION.
Thanks,
Vinoth

Hi Raman,
Yes, still i am getting error.
before when the invoice is posted , there is no error.
there are some 10 invoices posted already , but there are some changes done in the PO , after that they could post two invoices but for the third invoice , i am getting this error.
when the invoive is posted without error , these are the account movements that are hit
Here
441510 is a vendor account
61799410 is a WBS element G/L account
27411000 is a G/L for tax.
What could have pulled out this WRX error (Account determination for entry SKPL WRX 0002 _1020 not possible ) for me????
can u suggest me some solutions.
Thanks,
Vinoth

Error while doing MIRO-Overflow for arithmetical operation (type P) in prog

Hi ,
I am getting the error while doing the MIRO as below-
Runtime Errors         COMPUTE_BCD_OVERFLOW
Exception              CX_SY_ARITHMETIC_OVERFLOW
Date and Time          20.05.2009 10:07:03
Short text
     Overflow during the arithmetical operation (type P) in program "SAPLMRMC".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLMRMC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
      caught in
     procedure "MRM_AMOUNT_QUANTITY_PROPOSE" "(FUNCTION)", nor was it propagated by
      a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
Please let me know how can this be removed.

Hi,
There can be some problem with tolerances set in the customizing.
In my case, I was getting this error because of delivery date variance. The difference between delivery date maintained in PO and invoice date was huge and hence the multiplication of price of PO and difference of delivery date was huge and that was the reason for error.
Similarly in your case also, there will be some tolerance limit problem.
Please check your tolerance limits set in customizing.
Regards,
Mihir Popat

Error while posting MIRO

Hi Experts
I got a error like this while posting MIRO
"No amount authorization for customers/vendors in company code 401"
I tried to look out in T043 Table,since i cant able to go further
Let me know the reason for this error and the settings to do
Regards
Amuthan M

Hi,
While creating tolerance group you are specified the authorization group/ Just delete the name of the group you have created and keep it blank OR assign the user to that group and save.
Note:
If you create tolerance groups then the group must be assigned to the users in t.code:OB57 who are posting the transaction. Defining and assigning the tolerance groups to employees is not going to solve, you have to enter the amount ranges of tolerance for G/L document, Customer and Vendor posting.
In t.code:OBA4 create an entry for your company code. (Group creation is not compulsory). If your requirement permits better keep the group column empty. when no group is created its for all users.Double click on company code and enter upper limits and permitted payment differences and save.In t.code:OBA3 enter the ranges for payment differences and any other columns as per your requirement..
Regards,
Biju K

Error while saving Excise Invoice

Hi,
   I am getting an error while saving an excise invoice. It is as follows :
    BED : Debit = 1,400.00 Credit = 392.00 Diff =1,008.00
    Message no. 8I312
please help....
Thanks & Regards,
S.Rajeswari

Hi,
I am getting the following error while saving the Excise invoice.
Balance in transaction currency
    Message no. F5702
Diagnosis
    A balance has occurred in transaction currency 'INR' with the following
    details:
    Exchange rate '00', amount '            28.00' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling
    application.
System Response
    Your data cannot be processed in FI.
Procedure
    The error is probably in the calling application.
Thanks & Regards,
Ramya

Tax error while posting an invoice in SRM

We are using SRM 5.5 SP4, ECS and ECC 6.0. We are using vertex for tax caluculation and we configured the tax calculation to always occur in ECC.
One more important point is, client has decided to use invoicing in SRM. Now the problem is we ran in to so many tax related issues and we opened OSS messages for this but SAP did not help. Let me explain the problem in detail.
1) We used to get "Tax jurisdiction code could not be determined" error while creating shopping cart, but we implemented note 436760 and hardcoded a value and got rid of that error.
2) When we create a SC, the copy of PO is created in ECC and vertex is called for tax calculation and tax is calculated properly based on the tax hierarchy except when you use the Shipping Address (external), so when I used the delivery address other than plant, it should calculate based on that address but it was not doing that, its calculating based on the cost object's jurisdiction code. For this problem, we have implemented ME_ADDRESS BADI in ECC, but with this BADI, it is always taking delivery address's jurisdiction code, which is also wrong.
The tax jurisdiction determination should be from 1) Delivery address if its different from plant, else it should look in to the cost object, else storage location then plant.
So we implemented the above logic in that BADI and there is no problem with PO taxes.
3) When we create an invoice with reference to PO, the invoice verification program is always determining the tax jurisdiction code from plant even though the taxes on PO are calculated based on cost object, hence the IDOC is erroring out by saying there is a difference in tax.
So we implemented the user exit and used the same logic of tax determination and its fixed now.
4) Finally, we are trying to create invoices without PO's in SRM, here no tax calculation is happending in SRM, but when we try to post the invoice in to ECC, we are getting the following error
"SAX processing failed on input stream#SAX processing failed when attempting to add child element to parent. (parent element=com.vertexinc.tps.common.domain.LineItem, child element=com.vertexinc.tps.x.."
So I am not sure how to fix this, we are at the dead end now out of ideas, so trying to get some help from experts like you about looking at this problem in a different angle. Now there are a couple of questions I can ask you
1) Did we do something wrong by selecting R/3 as the tax calculation system, if not is it difficult to fix this error and move forward?
2) What if we need to change the design and start calculating the taxes in SRM by connecting SRM to Vertex, will there be any new challenges? and do you have any config doc for this? Also we are implementing this rollout for US, Canada and Mexico companies.
I would really appreciate if you can reply me with your valuable input. You can also email me if @ [email protected]
Thanks a lot,
Sreedhar

Hi
It's recommended to have the same Tax related configuration data replicated in SRM system from R/3 as well.
I don't recommeded you to go with Hard-coding of tax codes.
We have faced similar issues with Delivery address and we have to solve it using our custom logic inside the BBP_DOC_CHANGE_BADI and BBP_CREATE_PO_BACK BADIs.
Anyways, send the detailed business requirements to my mail which are already having with you. )
I will definitely help you out.
Please refer to following threads as well.
sales tax gurus
How to display country related tax codes in SRM
e-Invoice tax calculation.
Tax code T1 does not exist for jurisdiction code error in shopping basket
Drill down facility not working for Tax codes ....Urgent!!!!!
Tax Issue
Tax Calculation
Tax setting in Extended Classic Scenario
Withholding Tax in SRM5.0
IDOCS for Tax Information
Taxes in Bid Invitation
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Error while posting vendor invoice in F-43

Hi experts,
while posting vendor invoice with Tax code , i am getting the following error:
Posting is only possible with a zero balance; correct document
Message no. F5060
Here tax line item is not yet all displaying in simulation.
If I posted with tax code with ZERO percentage it is posting correctly.
where as same transaction I am able to post through transaction code FB60.
What could be the reason?
regs,
ramesh b

Hi
Please check and correct the respective line items , because your selecting incorrect GL account with respective posting keys
Example : You have exp gl a/c at first line items against vendor invoice posting's, normaly this vendor will post in first line item with posting key is 31 with vendor a/c and second line item 40 with exp GL a/c and same you will check any required inputs have missed out from this transactions.
Regards
CHOWDARY

Error while doing miro of network purchase order ( no funds center entered/

Hi,
we are facing one problem while doing miro of network service purchase order. System is giving message 'No funds center entered/derived in item 00030'.
We have activated funds management in Jul'10. The said network service PO belong to previous year. Also we have changed
commitment item of GL account related to concerned service order in Jul'10 & posted GRN one in apr'10 & one aug'10.
System is not allowing to cancel the service entry sheet.
Can anybody help on this.
regards
abhishek

we had activated the trace facility for FMDEIRIVE & found that all FC/Commitment item derived correctly. But while posting the document it is throwing an error.
Regards
Abhishek

Error while parking MIRO invoice

Similar Messages

Maybe you are looking for