Account dertermination error while doing MIRO for third party PO

Hello,
This is regarding error message while doing MIRO (IR)
There is already a PO in the system with item category S ( Third Party ) &
Acc assignment object u2013 C (Sales order).
For this PO , I could find 10 invoices already posted in the system.
Between when these invoices were posted , there were some changes done to the PO.
But even after those changes , many invoices were posted in the system,
But now , when I try to post the invoice , I am getting the below error message.
the error message is ** Account determination for entry SKPL WRX 0002 _ 1020 not possible** while posting.
Message no. M8147
Diagnosis
The system did not find an account for this transaction. This means that the account determination for key SKPL WRX 0002 _ 1020 is not maintained in MM Customizing (Valuation). The key is made up of:
u2022 Chart of account
u2022 Transaction key (= Posting transaction)
u2022 Valuation grouping code
u2022 Account grouping code
u2022 Valuation class
System Response
The system cannot update a G/L account for this transaction. You cannot post the transaction.
Procedure
Contact your system administrator.
If you have the authorization, check the Account determination in Customizing for Valuation.
Proceed
Note
The relevant posting transaction can be found in Table T030A.
I have checked the entry in OMWD, where valuation grouping code is maintained against the valuation area & company code.
PLEASE SUGGEST ME SOME SOLUTION.
Thanks,
Vinoth

Hi Raman,
Yes, still i am getting error.
before when the invoice is posted , there is no error.
there are some 10 invoices posted already , but there are some changes done in the PO , after that they could post two invoices but for the third invoice , i am getting this error.
when the invoive is posted without error , these are the account movements that are hit
Here
441510 is a vendor account
61799410 is a WBS element G/L account
27411000 is a G/L for tax.
What could have pulled out this WRX error (Account determination for entry SKPL WRX 0002 _1020 not possible ) for me????
can u suggest me some solutions.
Thanks,
Vinoth

Similar Messages

Error while doing GR in third party process

Dear Friends,
While doing Third party process, at GR (w.r.t. inbound delivery) the following message appears Purchase order 4500000087 has no items and stops creating GR. But the P.O has the Item. Do have any clue?
Thanks,
Hari.

Hi Hariharan,
In standard third party process you won't get the goods physically they are delivered by your vendor directly to your customer. In this process there's no meaning of creating inbound delivery I guess...
You can do statistical goods receipt ('ghost GR' as it was called by someone in SD forum) but even this GR isn't a must (it's based on your invoicing scenario).
I'm not sure but I'm afraid you cannot create inbound delivery for it if your settings are proper.
BR
Csaba

While doing MIGO & MIRO for Third Party V/D

Hi Gurus,
While doing MIGO for Third Party Vendor, I am facing the below mentioned error.
Maintain number range object for object J_1IRG23A1, year 2008, excise group V1
Message no. 4F159
Kindly suggest the solution for that.........
After this i'll come to MIRO

Goto J1I9, there put Object "J_1IRG23A1" and click on Number Ranges button, there for Excise Group "V1" maintain No. Range with No. Range Code "01"
Pankaj Singh

Error while doing IV for Service Delivery Payment

Dear Support,
There is Problem while doing Invoice for delivery Payment(Agent commission) in case of Service Order having without
account assingment.
While doing Invoice for that Delivery cost , system is giving a error message 'Enter a GL Account'.
Pls provide some solution regards .
Ragerds
Mukesh

Hi,
if your service order is a service purchase order, please read the following:
Planned delivery costs are not supported for service orders.
There is no plan to change this in the near future.
Delivery costs are generally not supported in external services
management and in case of blanket purchase orders, item category D or B.
Instead of representing delivery costs via conditions, in case of
service documents, freight costs and other, SAP recommends to add in
additional service lines. (note 381030 )
For the future we recommend to use additional service line instead
of planned delivery costs condition. There is no problem to post
invoice for different vendor for particular SES created for service
line that constitutes delivery costs.
Regards,
Edit

Error while doing GR for scheduling aggrement

Dear Experts,
We are facing error while doing GR for scheduling aggrement.
we have done the following steps.
1) Scheduling aggreement in ME31L
2) Released in ME35L
3) Mainatined Sch.Agmt Schdule in ME38 for todays and date 200 qty and other line is 800 qty.
When we are trying to do GR in MIGO system is giving the following message.
Document 5500000152 does not contain any selectable items
can I know what I have missed in the above steps.
Please guide me to resolve this.
Regards,
Prasad

Hi,
Please check Please check if Gr is already done against this document. Also please check whether you have attached SA in the source list with line items.
T-code:ME01
Enter Mat.code & Plant.
In the next screen pl.do the following:
Valid from - commencement date of the SA
Valid to - End date of the SA
Vendor - Vendor on whom the SA is released
POrg - Your purchase organisation
PPL - Leave it blank(This is only for interplant)
OUn - Ordering unit
Agreement - SA number
Item - 1
I hope this will resolve your issue. Thanking you

I am getting error while doing MFBF for semifinisg good

Hi,
i am getting error while doing MFBF for semifinisg good
Existing standard cost estimate cannot be used
Message no. RM175
Diagnosis
This error appears under the following circumstances:
The existing standard cost estimate cannot be used for backflushing activities as the repetitive manufacturing profile was not maintained correctly when the standard cost estimate was carried out.
The standard cost estimate must come from product costing. Other cost estimates (such as base object controlling) are not possible.
Procedure
The repetitive manufacturing profile assigned to the material at the time of the planned cost estimate must be a profile for repetitive manufacturing with product cost collector.
Use product costing to create the standard cost estimate.

I had already check REM profile repetitive mfg profile final backflush w. activities.
this particular material is semifinish material attached in BOM of finish material.
backflush of finish good is possible but now new requirement is to do production booking for the semifinish material.
i had assign production version , done routing and maintain REM profile,
created material cost with quantity structure ck11n then run the costing in ck40n.
still getting the error what else is to done to able to book this thru MFBF.

Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE

Hi All,
I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE:
Goods movement not possible with mvmt type 601
Can anyone suggest me what will be the solution for it?
Regards,
Raghuraman.k

I tried with the above BAPI but it is not working.
In my case a delivery has one line item with batch split and other line item without batch split.
Below is my code :
DATA : gwa_header_data TYPE bapiobdlvhdrcon,
       gwa_header_ctrl TYPE bapiobdlvhdrctrlcon,
       lv_delivery     TYPE bapiobdlvhdrcon-deliv_numb,
       git_item_data TYPE STANDARD TABLE OF bapiobdlvitemcon,
       gwa_item_data TYPE bapiobdlvitemcon,
       git_item_ctrl TYPE STANDARD TABLE OF bapiobdlvitemctrlcon,
       gwa_item_ctrl TYPE bapiobdlvitemctrlcon,
       git_return    TYPE STANDARD TABLE OF bapiret2,
       gwa_return    TYPE bapiret2.
*Header data
gwa_header_data-deliv_numb = '0808000002'.
*Header Control data
gwa_header_ctrl-deliv_numb = '0808000002'.
gwa_header_ctrl-post_gi_flg = 'X'.
*Delivery Number
lv_delivery = '0808000002'.
*Item data and its corresponding control data
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900002'.
gwa_item_data-dlv_qty         = 4.
gwa_item_data-dlv_qty_imunit = 4.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900002'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900003'.
gwa_item_data-dlv_qty         = 6.
gwa_item_data-dlv_qty_imunit = 6.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900003'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '000020'.
gwa_item_data-dlv_qty         = 10.
gwa_item_data-dlv_qty_imunit = 10.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '000020'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
BREAK-POINT.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
EXPORTING
    header_data    = gwa_header_data
    header_control = gwa_header_ctrl
    delivery       = lv_delivery
TABLES
    item_data      = git_item_data
    item_control   = git_item_ctrl
    return         = git_return.
BREAK-POINT.
IF git_return IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.

Getting the error while doing PGI for depot delivery

Hi
I am getting the below error while doing PGI for Depot delivery. This error is happening only when I taking the materials from stock transfer order which has more than 10 line items. Same issue is not happening when I am taking one material in Stock transfer order in & same material in depot delivery. Please see the screen shots below attachment. I have already maintained no range for the object J_1IDEPINV for year 2014.
Regards
PK

Moved from SAP ERP SD Sales to Internationalization and Unicode. Please post all your CIN related queries here. Also ensure that before posting, you made efforts in searching in SCN or Google. The reason for this indication is the issue you posted has already been discussed many times here and you will get some clue had you searched.
G. Lakshmipathi

Error while doing MIRO-Overflow for arithmetical operation (type P) in prog

Hi ,
I am getting the error while doing the MIRO as below-
Runtime Errors         COMPUTE_BCD_OVERFLOW
Exception              CX_SY_ARITHMETIC_OVERFLOW
Date and Time          20.05.2009 10:07:03
Short text
     Overflow during the arithmetical operation (type P) in program "SAPLMRMC".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLMRMC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
      caught in
     procedure "MRM_AMOUNT_QUANTITY_PROPOSE" "(FUNCTION)", nor was it propagated by
      a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
Please let me know how can this be removed.

Hi,
There can be some problem with tolerances set in the customizing.
In my case, I was getting this error because of delivery date variance. The difference between delivery date maintained in PO and invoice date was huge and hence the multiplication of price of PO and difference of delivery date was huge and that was the reason for error.
Similarly in your case also, there will be some tolerance limit problem.
Please check your tolerance limits set in customizing.
Regards,
Mihir Popat

Error while doing miro of network purchase order ( no funds center entered/

Hi,
we are facing one problem while doing miro of network service purchase order. System is giving message 'No funds center entered/derived in item 00030'.
We have activated funds management in Jul'10. The said network service PO belong to previous year. Also we have changed
commitment item of GL account related to concerned service order in Jul'10 & posted GRN one in apr'10 & one aug'10.
System is not allowing to cancel the service entry sheet.
Can anybody help on this.
regards
abhishek

we had activated the trace facility for FMDEIRIVE & found that all FC/Commitment item derived correctly. But while posting the document it is throwing an error.
Regards
Abhishek

Error while doing MIRO

Hello Everybody,
I am trying to do MIRO for a Purchase Order.
But I see the following error while doing that -
"G/L account is not defined in chart of accounts 1000".
Can someone tell me whats going wrong and where do I have to check to set the following conditions right for a MIRO posting to be done?
Please help. All the help is appreciated.
Thanks,
Sneha.

Hello Sneha singh
In addition to Mr.srinath's suggestions please check whether you have maintained Reconsallation account for your vendor in the Vendor masterdata in XK01 in the company code level
have you maintained properly the OBYC settings (take the help of your MM or FI consultant for this) and also check in OMWD whether the valuation grouping 0001 code is assigned to your plant
Mostly along with Mr.Srinath's suggestions Reconsallation account checkings in the Vendor masterdata in XK01 should solve your issue
Regards
Raja

Error while doing MIGO for a sub-contracted item

Hello to Everybody,
I am facing below problem -
Error : Incorrect CCtr <Cost Center Code> with this account (CCtr category must=D) for
<Item Code> , while doing MIGO. (for receiving sub-contracted item from vendor).
May I request for possible solution to above error ?
regards,

Dear Sanjay,
You can determine the cost object for the posting of the costs in the transaction OKB9.
Following thread should resolve this issue:
Re: cost of subcontracting
Regards,
Naveen.

Error while doing MIRO-Perform Plan price

Hi ,
We are on ECC 6 and we are getting error as "Perform Plan price for the material" while doing MIRO.
*Information:*
Price is different in Purchase requisition and PO&GR.MM03 is having proce control as "S" and the M Master is having both Moving price and standard price.
I tried changing the price through MR21 but still didn't worked.
Pl let me know if you need more info..
Thanks a lot in advance for early reply.
Govind

Hi,
Thanks for the reply. Since we are not using GR feature and we have not reversed the GR anytime.
Regards,
Lovkesh

Account assignment in schedule line category for third party sale

in settings for schedule line category CS -for third party sales, in the field Account Assignment category we assign X-all auxiliary account assignment.
what is the purpose and reason for using account assignment category in third party and at what point of time this comes into picture in third party sales process

Hi Sudha A,
Procureement against customer requirement will be booked against cost or expense account. So when creating PO, this account assignment category is determination factor for respective G/L accounts in MM.
- Account assignment category will have general modification assigned. in MM account determinatoin OBYC settings-
Valuation group code(this needs to be confirmed) + General Modification + valuation class determines G/L account.
This is how G/L account will be displayed in PO - item level - account assignment tab.
To see the settings in account assignment category - check the help of the field & choose customization & observe in details.
Hope it clears,
Regards,
Reazuddin MD

ERROR WHILE POSTING MIRO FOR MULTIPLE ACCOUNT ASSIGNMENT (ASSET)

Hi Guys,
We created a PO for asset with multiple account assignment. And we immediately do IR instead of GR.
While doing IR it is giving error
1) Quantity delivered is zero - Warning message
2) Account 245350 requires a Transaction Type or is Invalid - Error message
what may be the problem. how can we eliminate and post it
Regards
palani

Hi,
I would assume the G/L account you used was not properly set up. Did you get the same problem if you try to change to another G/L account? Perhaps, get your FI specialist to look into this G/L account-related error and verify it.
Cheers,
HT

Account dertermination error while doing MIRO for third party PO

Similar Messages

Maybe you are looking for