Error while saving the file path

I have come across a problem in LSMW.
In specify files step when I was trying to give the filename either in Presentation server or Application server and then save ,I am getting an error called 'No Logical Path has been specified'. In debugging I can see p_log_path and p_log_file are initial where as p_phys_file_compl has the file which is created automatically with standard naming convention. These 3 fields represents Converted Data files. I think the problem is with settings since the error is not happening to other users. If we double click 'Converted Data'  I can see Logical Path and Logical File fields. If I give the same file that is used for converted data it is asking me to create and if we agree then it creates and then we are able to save. So I think there is some setting changes or some other thing happened which at this stage I couldn't find out because I have not changed any settings. So can you please let me know if u have come across the same problem or if u know the solution.

In the <b>specify files path</b> have u specified the paths correctly.
  5  Legacy data          On the PC (frontend)                                                                               
VASG3 INPUT FILE               Y:VHDEV TEST FILE unlinked genl1.txt                      
                                        Data for one source structure (table)                       
                                        Delimiter tabulator                                                                               
Order of fields as in source structure definition           
                                        With end of record sequence (text file)                     
                                        Codepage ASCII                                                                               
Legacy data          On the R/3 server (application server)                                    
  5  Read Data            File for read data (application server)                                                                               
5  Read Data                      /int/T82/conv/VNH_ASGN3.lsmw.read                                                                               
A82      /int/A82/conv/VNH_ASGN3.lsmw.read                                      
             P82      /int/P82/conv/VNH_ASGN3.lsmw.read                                      
             T82      /int/T82/conv/VNH_ASGN3.lsmw.read                                                                               
5  Converted Data       File for converted data (application server)                                                                               
5  ConvertedData                 /int/T82/conv/VNH_ASGN3.lsmw.conv                                                                               
A82      /int/A82/conv/VNH_ASGN3.lsmw.conv                                      
             P82      /int/P82/conv/VNH_ASGN3.lsmw.conv                                      
             T82      /int/T82/conv/VNH_ASGN3.lsmw.conv                                                                               
Values for wildcard  Values for wildcard '*' in file names                                    
Refer teh above u ahve to specifythe path till PROD system.
I too  faced the saem problem.

Similar Messages

  • Error while Saving the report

    Hi,
    i have created some reports which are working fine,
    but now i am facing some errors while saving the files.
    Also the reports does show only one record while there are many records in the database.
    The error messages are as follows:
    REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
    REP-1070: Error while opening or saving a document.
    Please help me to find out the exact problem.
    Also tell me how can i show all the pages of Database records in a report( while one record on each page)

    As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
    Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
    Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
    As you'll discover, Reports is not the most robust application ever written.

  • An error occurred: Save document failed / An error occurred while saving the document: PATH (HDB 00055)

    Hello Colleagues, I am creating an analysis in build 576, everything goes well, the algorithm calculates the needed values, but when I try to save the analysis, I receive the following error message: "An error occurred: Save document failed / An error occurred while saving the document: <PATH> (HDB 00055)".
    Does anyone know what could cause this error message?
    Thanks a lot for any hint.
    Sergey

    Hi Henry,
    I am using PA 1.0.11 and received this error; any update on this fix for SAP PA. Does this happen for a particular data source.
    I am currently using Excel as source and whenever I try to use this data; I get this even if I move the data to a new file or rename a file. I tried to check the same issue with a different file and it works fine. This file worked fine a day back.
    Please let me know if this is unusual for this version.
    Regards,
    Arvind E

  • The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

    I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
    The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
    Thanks,
    Venu S.
    Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

    Hi Venu S,
    Based on my research, you might encounter a known issue, please try the hotfix in this KB:
    http://support.microsoft.com/kb/928385
    Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
    The version of Windows Server you are using
    The result of SELECT @@VERSION
    The scenario when you get this error
    If anything is unclear, please let me know.
    Regards,
    Tom Li

  • (409) Conflict Error while uploading the file into Sharepoint library

    Getting the below error while uploading the file into Sharepoint library.
    (409) Conflict. at System.Net.HttpWebRequest.GetResponse() at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() at Microsoft.SharePoint.Client.File.SaveBinary(ClientContext context, String serverRelativeUrl,
    Stream stream, String etag, Boolean overwriteIfExists
    I have used the below code:
    ClientOM.File.SaveBinaryDirect(clientContext, "/Shared%20Documents/NewDocument.pptx", memoryStream, true);
    Thanks in advance.

    May be issue is with path.
    https://server/ should be there instead of
    subsite path(https://server/path/path)
    in the client context
    Check the below link
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/fbb38b10-1127-48a6-a65f-0301edd766c4/the-remote-server-returned-an-error-409-conflict-error-while-uploading-files-to-sharepoint?forum=sharepointdevelopmentlegacy

  • Error while saving the excise invoice

    Hi All,
    I am getting the following error while saving the excise invoice.
    No account is specified in item 0000000001
    Message no. F5670
    Diagnosis
    No account was specified for account type "S" in item "0000000001" of the FI/CO document.
    System Response
    The Financial Accounting program cannot process the document.
    Procedure
    A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.
    I have read all the posts with regards to the error before, however still after doing the required settings I am getting the error. Please let me know for the same.
    Kind Regards
    Atul Keshav

    Dear All,
    The issue stands resolved please find below the required settings which need to be done.
    You need to maintain the following entries in  J_1ITRNACC table
    100 DLFC 01 CR PLAAED
    100 DLFC 01 CR PLABED
    100 DLFC 01 CR PLACESS
    100 DLFC 01 CR PLASED
    100 DLFC 01 CR PLAAT1
    100 DLFC 01 CR RG23AAt1
    100 DLFC 01 CR RG23AED
    100 DLFC 01 CR RG23BED
    100 DLFC 01 CR RG23SED
    100 DLFC 01 DR MSUSP
    Also the table J_1ITRNACC should include entries for GRPO, CAPE, DIEX, EWPO,
    TR6C with subtransaction type 01.
    We need to maintain GL Accounts accordingly in the table  J_1IEXCACC.
    If still the error persists then you need to apply the following notes.
    1018071
    978186
    1032813
    The SAP note 1032813 contains the correction for the program MJ1IINF01
    you will have to apply this manually.
    Kind Regards
    Atul Keshav

  • Error While downloading the file A server Error has occurred, please try again later Downloading Yahoo mail Application Attachments  Trying to download My Photos and movie 3 items so i can delete them all

    I have icloud and a new iPhone5 ! They work good , took pictures and a few short movies, plugged in my phone to my iMac transfered Items to iPhoto then inported items to iMovie. when getting to know what i was doing i decided to delete pictures and movies i no longer wanted. when i looked for a few missing items i opend Finder and there some where buyt i had already trashed them and deleted the doubles. Still could not find missing pictures and movies 3 items and today after calling yahoo about a different complant with sending feed back for Yahoo mail Applications login . i opened up Attachments Not the Large Attachments just Attachments and there were the 3 items i had been hunting for to Trash and delete. the mail Attachments file does not have the Option to delet Files and photos and movies. When i tried to Download the 3 items a window shows up that says Error While Downloading the Files, A Server Error has occured, please Try Again later. nothing works how do i remove the Trapped photo and movie Blank Files and trash them?  Onece they get into my downloads i can do something with them as i understand.    That part of it kind of keeps me in Question also because why should i have to down load my own files of Attachments / Pictures and movies if they are comming from my iMac?    How much better is iLife11 then iPhoto08 and iMovie08 .  Thanks Greg

    Hello,
    Thank you for your post.
    This is a quick note to let you know that we are performing research on this issue.
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • PSC 2510 - Wireless setup - "Error while saving the settings to the device."

    While trying to setup my PSC 2510 to be wireless I get an error message "Error while saving the settings to the device.". This comes after selecting connecting Through Network, selecting printer device, selecting WEP, entering key, and clicking next.
    PSC 2510
    Windows Vista
    Using latest sfotware from HP to install
    Thanks
    Dennis
    This question was solved.
    View Solution.

    ISSUE RESOLVED .. based on responce from PrintDoc to penn (refrence topic "C4385 Printer - Netgear DGN2000 - wireless setup".
    PrintDoc responce helped me find my problem (to reset network settings on the printer to factory) even though diffrent printer.
    Thanks

  • Error While saving the Production Order

    Dear Experts
    Pls let me know why am getting the below error while saving the production order after release..
    PSFC_STD_LAYOUT does not exist
    Message no. SSFCOMPOSER004

    Dear,
    Please check have you assigned the scheduling profile in work scheduling view of materail master?
    Then go to OPKP check the same scheduling profile where you have activited the On realese execute printing remove this tick mark and then try with new order.
    Or you can do the configuration in Tocde :OPK8 here assign the PSFC_STD_LAYOUT in forum.
    Regards,
    R.Brahmankar

  • Error while opening the file store file "WLS_DIAGNOSTICS000000.DAT".....

    I have a WL 9.2.1 running on Sun solaris o/s .....it is failing to start thowing the following exception
    <Mar 19, 2009 5:21:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was a
    n error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
    at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS0
    00000.DAT"
    at weblogic.store.io.file.Heap.open(Heap.java:166)
    at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
    at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:350)
    at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
    at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
    at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
    ... 4 more
    Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
    at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:213)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:103)
    at weblogic.store.io.file.Heap.open(Heap.java:164)
    ... 9 more
    Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
    at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
    at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:51)
    at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:138)
    at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:112)
    at weblogic.store.io.file.StoreFile.open(StoreFile.java:142)
    at weblogic.store.io.file.StoreDir.open(StoreDir.java:95)
    ... 10 more
    i went ahead and checkd the file and the privs on the file they look correct -rw-r--r-- ...but when i just restart it ..it starts with no errors the next time......What could be the issue.....please help
    Then only reason i could think of is the size of the file is 35MB now...is this the problem....if yes....is there a way to automaticaly rotate this file ....

    The root cause appears to be right in the stack trace:
    Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11I think this indicates that either the file was either locked (because another instance of WebLogic had it opened), or that the file was unavailable for some reason. WebLogic locks files as a safety precaution to prevent misconfigured setups (multiple domains sharing the same directory and store name) from attempting to share the same file.
    I don't think that this message necessarily means there is a file corruption.
    As for rotation, the file store automatically adds new files as needed (I think its 1 file for every 2GB of data). The "diagnostics" file store is generated by the optional diagnostics feature, and I think that this feature has options for controlling the amount of stored data.
    Tom

  • Automatic Picking giving error while saving the Delivery

    Hi
    We have done the configuration for doing automatic picking while saving the delivery.
    Steps done are
    1. TCode V/38
    2. TCode OVLT  where we have changed the Time value form 3 to 4 for  Send Immediate
    3. TCode VP01SHP where all shipping points are maintained.
    we are getting the following error while saving the delivery.

    Execute ST22 and go through the explanation given under the tab "Error analysis" and "How to correct the error".  Ask your ABAP team to look into this if you are not able to find out the root cause of the issue.
    G. Lakshmipathi

  • Getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1. It is creating issue to convert PDF into TIFF. Please provide the solution ASAP

    Hello All,
    I am getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1.
    Also, it is creating issue to convert PDF into TIFF. Please provide the solution ASAP.

    I am using Adobe reader XI. When i open PDF it gives "OUT of memory" error after scrolling PDF gives another alert "Insufficient data for an image". after clicking both alerts it loads full data of PDF. It is not happening with all PDFs. couple of PDFs are facing this issue. Because of this error my software is not able to print these PDFS into TIFF. My OS in window7*64. I tried it on win2012R2 and XP. Same issue is generating there.
    It has become critical issue for my production.

  • UCCX 8.0 "Error while uploading the file. Please try again."

    I was on UCCX  version 8.0.2.11003-10 and i was able to upload an script with the same name as an old one (overwrite).
    Upgrade to  UCCX 8.0.2.11004-12 and now I am receiving the error: "Error while uploading the file. Please try again."
    There was a bug CSCth09248 that affected version 7 but supposed to be fixed on version 8 and was fixed on an earlier version. But after moving to a minor patch, problem came back...
    Any ideas?

    Hi,
    I belive the bug was initially opened to fix the issue when uploading script fails when using wizard to configure uccx.
    But now they have re-opened the same bug instead of opened a new one for the issue that you have.
    I looked at the case attached to that bug, case # 617145545. Below is the problem description that customer has which is same as yours and this bug has been re-opened to fix this particular problem.
    When I tried to upload a modified script with an existing file name, the message "script file already exists.
    Overwrite existing script file, continue?" comes up and when I select "OK" then,
    it dispaly Status "Error while uploading the file.  Please try again".
    If I remove an existing file first, it will upload fine.  
    Using UCCX Admin 8.0.2.11004-12 and UCCX Editor 8.0(2.0).
    Thanks
    Ankita

  • Error while saving the FM8 XML file

    Hello,
    While saving the FM8 XML file, an error message appears (see attached screen shot).
    Is there a solution to resolve this issue? Please suggest.

    Hi,
    This type of error is non-descript and could be caused by any number of things. It is impossible to troubleshoot from here based solely on that message. Let me ask a couple of questions, though:
    - Are you using structured FrameMaker? If so, are you using a structured app that has worked successfully before? In other words, did this just suddenly start happening to an otherwise-stable process?
    - Is there anything unusual about your layout; that is, anything other than a single text flow with graphics?
    Russ

  • Error while saving the excel file

    hai all,
    i had an requirement to upload customer master data through lsmw while saving the data in excel file with extension as) text( tab delimeted)(.txt) it is not saving and displaying the message as " the selected file type doesnot support workbooks that contain multiple sheets. to save only the active sheet click ok."
    regards,
    karthik

    Ensure that you have not opened any excel file or text file with similar name.
    thanks
    G. Lakshmipathi

Maybe you are looking for

  • Flash. Simple Project?

    Anytime I ask someone how to get images onto my website They say use Flash. I've tryed to understand flash. I'm now taking a collage class in Flash. So far we've learned how to make a stick man mov across the stage. All I want to do is put some slide

  • Why do waveforms show garbage in the plot legend and why is no one mentioning this?

    I have tried this on multiple machines and the result is the same. The plot legend expands and shrinks with garbage characters each time the waveform is updated. Sometimes the plot legend expands to as many as 100 garbage characters (or more). Is NI

  • Not able to log in: Initialization or shutdown in progress

    I working with oracle sql for a long time and suddenly today I am not able to log in to it. Here is what I get C:/Users/....>sqlplus @orcl SQL*Plus Release 11.2.0.1.0 Production on Sun Feb 3 17.05.52 2013 Copyright.........etc etc Enter Password: ERR

  • Iphoto '08: ALL OF MY PHOTOS ARE GONE, What can I do?

    I was loading new photos into my iphot 08, then the program stopped working, when i re-opened it, there are not photos in there!!! How can I get them back?!?!?! THank You!! Please help!!

  • Can't open files when a particular user has saved them

    We have one user whose Pages files nobody else can open, edit or copy when he saves them to our server. Somehow the files are not inheriting the correct permissions. Any ideas?