Error while starting Discoverer Viewer on AIX
I have installed IAS 9i 1.0.2.2 on AIX. While running Discoverer
Viewer (http://host:port/discoverer4i/viewer) I receive:
oracle.xml.parser.v2.XPathException: Unknown expression at EOF:
*|/.
Thanks in advance for any suggestions.
best regards
Krzysztof Jungowski
Pl do not post duplicates - Error while starting discoverer 10g
Similar Messages
-
Error while starting discoverer 10g
Dear All,
Currently we are facing issue while starting the WLS_DISCO discoverer service through node manager as:
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
at weblogic.nodemanager.server.Handler.run(Handler.java:70)
at java.lang.Thread.run(Thread.java:619)
Kindly suggest us ASAP to resolve the issue because it is an PROD server.
Thanks & Regards,
Kamalakannan RajendranPl do not post duplicates - Error while starting discoverer 10g
-
Error while starting OCSG Admin Server
Hi, I got following error while starting AdminServer of OCSG4.1
<The realm “myrealm” failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file /ORBQA/u02/volwcmount/wl1/oracle/bea/user_projects/domains/trial_domain/security/PKICredentialMapperInit.ldift..
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file /ORBQA/u02/volwcmount/wl1/oracle/bea/user_projects/domains/trial_domain/security/PKICredentialMapperInit.ldift.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
Truncated. see log file for complete stacktrace
com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file /ORBQA/u02/volwcmount/wl1/oracle/bea/user_projects/domains/trial_domain/security/PKICredentialMapperInit.ldift.
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.CSSWLSDelegateImpl.getService(Unknown Source)
Truncated. see log file for complete stacktrace
weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file /ORBQA/u02/volwcmount/wl1/oracle/bea/user_projects/domains/trial_domain/security/PKICredentialMapperInit.ldift.
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadFullLDIFTemplate(BootStrapServiceImpl.java:811)
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadLDIFTemplate(BootStrapServiceImpl.java:644)
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadLDIFPKICredentialMapperTemplate(BootStrapServiceImpl.java:208)
at com.bea.common.security.internal.service.BootStrapServiceImpl.loadLDIFPKICredentialMapperTemplate(BootStrapServiceImpl.java:133)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
kodo.jdo.FatalDataStoreException: The transaction has been rolled back. See the nested exceptions for details on the errors that occurred.
at org.apache.openjpa.kernel.BrokerImpl.newFlushException(BrokerImpl.java:2160)
at org.apache.openjpa.kernel.BrokerImpl.flush(BrokerImpl.java:2007)
at org.apache.openjpa.kernel.BrokerImpl.flushSafe(BrokerImpl.java:1905)
at org.apache.openjpa.kernel.BrokerImpl.beforeCompletion(BrokerImpl.java:1823)
at org.apache.openjpa.kernel.LocalManagedRuntime.commit(LocalManagedRuntime.java:81)
Truncated. see log file for complete stacktrace
kodo.jdo.DataStoreException: ORA-00942: table or view does not exist
{prepstmnt 22370361 INSERT INTO BEAPRMP (DOMN, REALMN, TYPEN, CN, CTS, CA, KAN, KAP, PN, PNIU, RN, WCN, WCI, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params=(String) trial_domain, (String) myrealm, (String) KeyPair, (String) type=:wsrpconsumer__81_COMPAT:0, (null) null, (null) null, (String) wsrpconsumer, (String) {3DES}YMuMZ2wV9gOdYMmriNMgeA==, (String) wsrpconsumer__81_COMPAT, (String) 0, (String) type=, (null) null, (null) null, (Timestamp) 2008-11-19 16:36:55.428] [reused=0]} [code=942, state=42000]
FailedObject: com.bea.common.security.store.data.PKIResourceMap@154bcc6
at org.apache.openjpa.jdbc.sql.SQLExceptions.narrow(SQLExceptions.java:146)
at org.apache.openjpa.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4150)
at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:102)
at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:72)
at kodo.jdbc.kernel.BatchingPreparedStatementManager.flushInternal(BatchingPreparedStatementManager.java:214)
Truncated. see log file for complete stacktrace
org.apache.openjpa.lib.jdbc.ReportingSQLException: ORA-00942: table or view does not exist
{prepstmnt 22370361 INSERT INTO BEAPRMP (DOMN, REALMN, TYPEN, CN, CTS, CA, KAN, KAP, PN, PNIU, RN, WCN, WCI, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params=(String) trial_domain, (String) myrealm, (String) KeyPair, (String) type=:wsrpconsumer__81_COMPAT:0, (null) null, (null) null, (String) wsrpconsumer, (String) {3DES}YMuMZ2wV9gOdYMmriNMgeA==, (String) wsrpconsumer__81_COMPAT, (String) 0, (String) type=, (null) null, (null) null, (Timestamp) 2008-11-19 16:36:55.428] [reused=0]} [code=942, state=42000]
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator.wrap(LoggingConnectionDecorator.java:192)
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator.access$700(LoggingConnectionDecorator.java:57)
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.executeUpdate(LoggingConnectionDecorator.java:866)
at org.apache.openjpa.lib.jdbc.DelegatingPreparedStatement.executeUpdate(DelegatingPreparedStatement.java:269)
at org.apache.openjpa.jdbc.kernel.JDBCStoreManager$CancelPreparedStatement.executeUpdate(JDBCStoreManager.java:1398)
Truncated. see log file for complete stacktrace
>
Regards,
imran[email protected] wrote:
Hi, I got following error while starting AdminServer of OCSG4.1
<The realm “myrealm” failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file /ORBQA/u02/volwcmount/wl1/oracle/bea/user_projects/domains/trial_domain/security/PKICredentialMapperInit.ldift..
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file /ORBQA/u02/volwcmount/wl1/oracle/bea/user_projects/domains/trial_domain/security/PKICredentialMapperInit.ldift.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
Truncated. see log file for complete stacktrace
com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file /ORBQA/u02/volwcmount/wl1/oracle/bea/user_projects/domains/trial_domain/security/PKICredentialMapperInit.ldift.
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.CSSWLSDelegateImpl.getService(Unknown Source)
Truncated. see log file for complete stacktrace
weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider CredentialMapper from file /ORBQA/u02/volwcmount/wl1/oracle/bea/user_projects/domains/trial_domain/security/PKICredentialMapperInit.ldift.
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadFullLDIFTemplate(BootStrapServiceImpl.java:811)
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadLDIFTemplate(BootStrapServiceImpl.java:644)
at com.bea.common.store.bootstrap.BootStrapServiceImpl.loadLDIFPKICredentialMapperTemplate(BootStrapServiceImpl.java:208)
at com.bea.common.security.internal.service.BootStrapServiceImpl.loadLDIFPKICredentialMapperTemplate(BootStrapServiceImpl.java:133)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
kodo.jdo.FatalDataStoreException: The transaction has been rolled back. See the nested exceptions for details on the errors that occurred.
at org.apache.openjpa.kernel.BrokerImpl.newFlushException(BrokerImpl.java:2160)
at org.apache.openjpa.kernel.BrokerImpl.flush(BrokerImpl.java:2007)
at org.apache.openjpa.kernel.BrokerImpl.flushSafe(BrokerImpl.java:1905)
at org.apache.openjpa.kernel.BrokerImpl.beforeCompletion(BrokerImpl.java:1823)
at org.apache.openjpa.kernel.LocalManagedRuntime.commit(LocalManagedRuntime.java:81)
Truncated. see log file for complete stacktrace
kodo.jdo.DataStoreException: ORA-00942: table or view does not exist
{prepstmnt 22370361 INSERT INTO BEAPRMP (DOMN, REALMN, TYPEN, CN, CTS, CA, KAN, KAP, PN, PNIU, RN, WCN, WCI, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params=(String) trial_domain, (String) myrealm, (String) KeyPair, (String) type=:wsrpconsumer__81_COMPAT:0, (null) null, (null) null, (String) wsrpconsumer, (String) {3DES}YMuMZ2wV9gOdYMmriNMgeA==, (String) wsrpconsumer__81_COMPAT, (String) 0, (String) type=, (null) null, (null) null, (Timestamp) 2008-11-19 16:36:55.428] [reused=0]} [code=942, state=42000]
FailedObject: com.bea.common.security.store.data.PKIResourceMap@154bcc6
at org.apache.openjpa.jdbc.sql.SQLExceptions.narrow(SQLExceptions.java:146)
at org.apache.openjpa.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4150)
at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:102)
at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:72)
at kodo.jdbc.kernel.BatchingPreparedStatementManager.flushInternal(BatchingPreparedStatementManager.java:214)
Truncated. see log file for complete stacktrace
org.apache.openjpa.lib.jdbc.ReportingSQLException: ORA-00942: table or view does not exist
{prepstmnt 22370361 INSERT INTO BEAPRMP (DOMN, REALMN, TYPEN, CN, CTS, CA, KAN, KAP, PN, PNIU, RN, WCN, WCI, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params=(String) trial_domain, (String) myrealm, (String) KeyPair, (String) type=:wsrpconsumer__81_COMPAT:0, (null) null, (null) null, (String) wsrpconsumer, (String) {3DES}YMuMZ2wV9gOdYMmriNMgeA==, (String) wsrpconsumer__81_COMPAT, (String) 0, (String) type=, (null) null, (null) null, (Timestamp) 2008-11-19 16:36:55.428] [reused=0]} [code=942, state=42000]
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator.wrap(LoggingConnectionDecorator.java:192)
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator.access$700(LoggingConnectionDecorator.java:57)
at org.apache.openjpa.lib.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.executeUpdate(LoggingConnectionDecorator.java:866)
at org.apache.openjpa.lib.jdbc.DelegatingPreparedStatement.executeUpdate(DelegatingPreparedStatement.java:269)
at org.apache.openjpa.jdbc.kernel.JDBCStoreManager$CancelPreparedStatement.executeUpdate(JDBCStoreManager.java:1398)
Truncated. see log file for complete stacktrace
>
Regards,
imranHI,
I got one reply on a site and it works.
sathya said,
*I got the same error as above. The fix is fairly simple. Login as “weblogic” user in Oracle and run the script under $BEA_HOME\wlserver_10.3\server\lib\rdbms_security_store_oracle.sql file and you’ll be good to go.*
*I didn’t realize this for quite some time. When I tried to create a new domain, I noticed this message on top bar in the second screen (fine print!)*
" -
Error while starting the OIM managed server in oracle VM
Hi ,
I am getting the following error , while starting the OIM managed server in Oracle VM.
<Jun 14, 2012 4:45:38 AM EDT> <Error> <org.quartz.impl.jdbcjobstore.JobStoreCMT> <BEA-000000> <MisfireHandler: Error handling misfires: Unexpected runtime exception: null
org.quartz.JobPersistenceException: Unexpected runtime exception: null [See nested exception: java.lang.NullPointerException]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3042)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
Caused By: java.lang.NullPointerException
at org.quartz.SimpleTrigger.computeNumTimesFiredBetween(SimpleTrigger.java:800)
at org.quartz.SimpleTrigger.updateAfterMisfire(SimpleTrigger.java:514)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doUpdateOfMisfiredTrigger(JobStoreSupport.java:944)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.recoverMisfiredJobs(JobStoreSupport.java:898)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.doRecoverMisfires(JobStoreSupport.java:3029)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.manage(JobStoreSupport.java:3789)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$MisfireHandler.run(JobStoreSupport.java:3809)
>
How to resolve this issue.Any one please suggest me , i am in a big trouble ...
Thanks in advance ..
-Deena.Hi P.k,
The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
What is GTC resource?
OIM version - 11.1.1.5.0.
-Deena. -
Error while starting ABAP trial version system
Hello Friends,
I am getting the following error while starting thesystem.Please help me in solving the problem. I have seen this problem has happened for many people. Points rewarded for helpfull answers.
error for dev_disp:
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4072) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Feb 05 16:11:12 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >INLD50044432A_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04E60040, size: 4205552)
DpShMCreate: allocated sys_adm at 04E60040
DpShMCreate: allocated wp_adm at 04E61A28
DpShMCreate: allocated tm_adm_list at 04E632E0
DpShMCreate: allocated tm_adm at 04E63310
DpShMCreate: allocated wp_ca_adm at 051D35A0
DpShMCreate: allocated appc_ca_adm at 051D3A50
DpShMCreate: allocated comm_adm at 051D3F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05254DB0
DpShMCreate: allocated gw_adm at 05254DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05254E20
DpShMCreate: allocated wall_adm at 05254E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Feb 05 16:11:13 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( INLD50044432A) [dpxxdisp.c 11663]
Tue Feb 05 16:11:14 2008
DpStartStopMsg: send start message (myname is >INLD50044432A_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Feb 05 16:11:54 2008
ERROR => W0 (pid 2280) died [dpxxdisp.c 14318]
ERROR => W1 (pid 2088) died [dpxxdisp.c 14318]
ERROR => W2 (pid 1504) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 3396) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2328) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 3316) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 3776) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
error from dev_w0
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 112]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server INLD50044432A_NSP_00 on host INLD50044432A (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Feb 05 16:11:15 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2280) [dpnttool.c 327]
Rgds,
DineshThe application server is unable to connect to the DB because it does not have the username/password that is stored in the XUSER file. If this is a unix system, then check the home directory for sidadm to see if the .XUSER file (it might be named something like .XUSER.62) is there.
Are you using the sidadm account to start the system?
Thanks,
J. Haynes
Denver, CO US -
Error while starting disp+work
Hello Friends,
I am getting the following error while starting thesystem.Please help me in solving the problem. I have seen this problem has happened for many people but no solution provided. Points rewarded for helpfull answers.
error from dev_disp:
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4072) http://dpxxdisp.c 1239
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Feb 05 16:11:12 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings http://dpxxtool2.c 5355
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >INLD50044432A_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 04E60040, size: 4205552)
DpShMCreate: allocated sys_adm at 04E60040
DpShMCreate: allocated wp_adm at 04E61A28
DpShMCreate: allocated tm_adm_list at 04E632E0
DpShMCreate: allocated tm_adm at 04E63310
DpShMCreate: allocated wp_ca_adm at 051D35A0
DpShMCreate: allocated appc_ca_adm at 051D3A50
DpShMCreate: allocated comm_adm at 051D3F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05254DB0
DpShMCreate: allocated gw_adm at 05254DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05254E20
DpShMCreate: allocated wall_adm at 05254E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Feb 05 16:11:13 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( INLD50044432A) http://dpxxdisp.c 11663
Tue Feb 05 16:11:14 2008
DpStartStopMsg: send start message (myname is >INLD50044432A_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet http://dpxxmbuf.c 1050
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Tue Feb 05 16:11:54 2008
ERROR => W0 (pid 2280) died http://dpxxdisp.c 14318
ERROR => W1 (pid 2088) died http://dpxxdisp.c 14318
ERROR => W2 (pid 1504) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => W3 (pid 3396) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => W4 (pid 2328) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x9c --> 0x98
ERROR => W5 (pid 3316) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W6 (pid 3776) died http://dpxxdisp.c 14318
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1677
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
error from dev_w0
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
http://dbsdbsql.cpp 112
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
http://dbsdbsql.cpp 136
B ***LOG BV3=> severe db error -10709 ; work process is stopped dbsh#2 @ 1199 dbsh 1199
B ***LOG BY2=> sql error -10709 performing CON dblink#3 @ 431 dblink 0431
B ***LOG BY0=> Connection failed (RTE:Database name is missing) dblink#3 @ 431 dblink 0431
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) http://thxxhead.c 1426
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) http://thxxhead.c 10240
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server INLD50044432A_NSP_00 on host INLD50044432A (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Feb 05 16:11:15 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm http://thxxrun1.c 720
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed http://thxxtool3.c 260
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2280) http://dpnttool.c 327
Rgds,
DineshHi Bidwan,
I tried executing the command for XUSER, Executed successfully. Still i am getting the same error..
Error logs for dev_w0
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.095 (Make PL 0.95)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C (0.068) MaxDB DBSL patch collection 1 2006 (note 962708)
C (0.051) DB50 perm block defect (note 934194)
C (0.046) ADBC: invalid data when fetching cursor with hold (note 925337)
C (0.045) Signal 11 during creation of BIA index (note 920743)
C (0.038) MaxDB DBSL patch collection 2 2005 (note 908602)
C (0.034) Livecache unicode connect (use SDK 7.6.0 b11) (note 901576)
C (0.028) Disable LVC codepage checking (note 882788)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.2 BUILD 014-123-152-175
C SQLDBC client runtime is MaxDB 7.6.2.014 CL 152175
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 112]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 136]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
I would like to mention that no SIDadm user has been created in windows user account. But installation was successfull
Rgds,
Dinesh -
Error while starting Quality Server
Dear All,
I am getting the following error while starting the Quality server.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
hgazfsrv:azfadm 1> startsap
Checking AZF Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
open logfile '/usr/sap/tmp/dev_coll.tmp' failed... use stderri
19:04:58 06.04.2010 ERROR: cannot open log file /usr/sap/tmp/dev_coll.tmp
19:04:58 06.04.2010 ERROR: Make sure directory /usr/sap/tmp exists or specify D
IR_PERF
19:04:58 06.04.2010 ERROR: in profile and run saposcol pf=<profile>
saposcol already running
Running /usr/sap/AZF/SYS/exe/run/startdb
Trying to start AZF database ...
Log file: /home/azfadm/startdb.log
HQS database started
/usr/sap/AZF/SYS/exe/run/startdb completed successfully
Starting SAP Instance DVEBMGS07
Startup-Log is written to /home/azfadm/startsap_DVEBMGS07.log
Instance Service on host hgazfsrv started
Instance on host hgazfsrv started
hgazfsrv:azfadm 2> +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Operating System: AIX:503
SAP: ECC6
DB: Oracle 10.2.0.2
The application is starting and working satisfactory, but is there any effect in any ways??
I have checked the file path /usr/sap/tmp/ , and the file is phycally existing, even if I restart the application I get the same error every time.
Any solution??
Thanks in advance.
Regards
Bhaskar.Hi Uday,
19:04:58 06.04.2010 ERROR: cannot open log file /usr/sap/tmp/dev_coll.tmp
19:04:58 06.04.2010 ERROR: Make sure directory /usr/sap/tmp exists or specify D
IR_PERF
for resolving the above error , pls do the following
1. Login to OS with sidadm user
2. Stop saposcol ( saposcol -k )
3. now login on OS with root user
4. goto exe directory ( /sapmnt/<sid>/exe )
5. Run command chown root:sapsys saposcol
6. Run command chmod 4750 saposcol
7. Login with SIDADM and run command :- sapsocol -l
8. also check folder /usr/sap/tmp exists or not ., if folder already exists then rename file dev_coll.tmp
An if folder /usr/sap/tmp eixits and file is not present there then , simply stop and start SAP.
Now while starting SPA you should not get the error which you were getting previously.
Thanks
Anil -
Error while starting the SOA suite
Hi,
Im facing error while starting SOA suite, which I was doing earlier without error.
Below is the error log.
An unknown OPMN error has occured
oracle.appserver.startupconsole.model.ConsoleException: An unknown OPMN error has occured
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:140)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
... 6 more
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
... 6 more
Exception caused by
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
oracle.appserver.startupconsole.model.ConsoleException: There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:139)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.control.GroupController.doStart(GroupController.java:47)
at oracle.appserver.startupconsole.control.Controller.start(Controller.java:69)
at oracle.appserver.startupconsole.view.controller.ControllerAdapter.start(ControllerAdapter.java:30)
at oracle.appserver.startupconsole.view.controller.MasterControlAdapter.run(MasterControlAdapter.java:94)
at oracle.appserver.startupconsole.view.Runner.main(Runner.java:39)
Caused by: oracle.ias.opmn.optic.OpticControlException: Error from opmn during process control operation
at oracle.ias.opmn.optic.AbstractOpmnEntity.runCommand(AbstractOpmnEntity.java:174)
at oracle.ias.opmn.optic.AbstractOpmnEntity.start(AbstractOpmnEntity.java:110)
at oracle.appserver.startupconsole.control.OPMNController.doStart(OPMNController.java:97)
... 6 more
<?xml version='1.0' encoding='WINDOWS-1252'?>
<response>
<msg code="-82" text="Remote request with weak authentication.">
</msg>
<opmn id="DWH-34316-K2:6200" http-status="204" http-response="0 of 1 processes started.">
<ias-instance id="soa.DWH-34316-K2.wipro.com">
<ias-component id="default_group">
<process-type id="home">
<process-set id="default_group">
<process id="943261457" pid="836" status="Stop" index="1" log="F:\OracleBpel\CoE\product\10.1.3.1\OracleAS_1\opmn\logs\\default_group~home~default_group~1.log" operation="request" result="failure">
<msg code="-21" text="failed to start a managed process after the maximum retry limit">
</msg>
</process>
</process-set>
</process-type>
</ias-component>
</ias-instance>
</opmn>
</response>Hi,
Below is the errror stated in opmn.log
Thanks in advance
07/10/18 10:04:15 [ons-internal] ONS server initiated
07/10/18 10:04:15 [pm-internal] PM state directory exists: F:\OracleBpel\CoE\product\10.1.3.1\OracleAS_1\opmn\logs\states
07/10/18 10:04:15 [pm-internal] OPMN server ready. Request handling enabled.
07/10/18 10:04:21 [pm-requests] Request 5 Started. Command: /start
07/10/18 10:04:21 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:0)
07/10/18 10:04:21 [pm-process] Starting Process: default_group~home~default_group~1 (943261440:0)
07/10/18 10:04:21 [pm-process] Starting Process: default_group~oc4j_soa~default_group~1 (943261441:0)
07/10/18 10:04:24 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:8080)
07/10/18 10:04:35 [pm-process] Process Alive: default_group~home~default_group~1 (943261440:3828)
07/10/18 10:05:31 [pm-process] Process Alive: default_group~oc4j_soa~default_group~1 (943261441:5944)
07/10/18 10:05:31 [pm-requests] Request 5 Completed. Command: /start
07/10/18 10:53:45 [pm-requests] Request 58 Started. Command: /stop
07/10/18 10:53:45 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:8080)
07/10/18 10:53:45 [pm-process] Stopping Process: default_group~home~default_group~1 (943261440:3828)
07/10/18 10:53:45 [pm-process] Stopping Process: default_group~oc4j_soa~default_group~1 (943261441:5944)
07/10/18 10:53:49 [pm-process] Process Stopped: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261439:8080)
07/10/18 10:53:53 [pm-process] Process Stopped: default_group~home~default_group~1 (943261440:3828)
07/10/18 10:54:03 [pm-requests] Request 58 Completed. Command: /stop
07/10/18 10:54:03 [pm-process] Process Stopped: default_group~oc4j_soa~default_group~1 (943261441:5944)
07/10/18 10:54:04 [pm-requests] Request 6c Started. Command: /stop
07/10/18 10:54:04 [pm-requests] Request 6c Completed. Command: /stop
07/10/18 10:54:04 [pm-internal] OPMN server stopped. Request handling disabled.
07/10/18 10:54:04 [pm-requests] Request 6d Started. Command: /shutdown
07/10/18 10:54:04 [pm-requests] Request 6d Completed. Command: /shutdown
07/10/18 10:54:04 [pm-scheduler] Pm/Ons confirm notification timeout
07/10/18 10:54:05 [internal] Logging disabled
07/10/18 10:54:16 [ons-internal] ONS server initiated
07/10/18 10:54:16 [pm-internal] PM state directory exists: F:\OracleBpel\CoE\product\10.1.3.1\OracleAS_1\opmn\logs\states
07/10/18 10:54:16 [pm-internal] OPMN server ready. Request handling enabled.
07/10/18 10:54:22 [pm-requests] Request 5 Started. Command: /start
07/10/18 10:54:22 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261442:0)
07/10/18 10:54:22 [pm-process] Starting Process: default_group~home~default_group~1 (943261443:0)
07/10/18 10:54:22 [pm-process] Starting Process: default_group~oc4j_soa~default_group~1 (943261444:0)
07/10/18 10:54:25 [pm-process] Process Alive: HTTP_Server~HTTP_Server~HTTP_Server~1 (943261442:7428)
07/10/18 10:54:33 [libopmnoc4j] Host and Port information for port type default-web-site not sent by the OC4J process
07/10/18 10:54:33 [libopmnoc4j] WARNING: OC4J did not send the protocol value for port id: default-web-site
07/10/18 10:54:33 [libopmnoc4j] Port information in the ONS notification is incorrect for proc: 943261443. Some of the reasons for the failure are:
1. ajp, rmi and jms ports could not be bound by the process.
2. If a port value for a certain port ID is handed by OPMN to the OC4J process and this value is not returned back in the ONS notifications. For example, this can happen for certain bad JGroups related configurations.
07/10/18 10:54:33 [libopmnoc4j] Process Start Error: default_group~home~default_group~1 (943261443:300)
07/10/18 10:54:33 [pm-process] Stopping Process: default_group~home~default_group~1 (943261443:300)
07/10/18 10:54:33 [libopmnoc4j] Process Stop Error: default_group~home~default_group~1 (943261443:300)
07/10/18 10:54:33 [libopmnoc4j] Failed to construct stop command for proc: 943261443
07/10/18 10:54:33 [libopmnoc4j] Forcefully Terminating Process: default_group~home~default_group~1 (943261443:300)
07/10/18 10:54:35 [pm-process] Starting Process: default_group~home~default_group~1 (943261443:0)
07/10/18 10:54:45 [libopmnoc4j] Host and Port information for port type default-web-site not sent by the OC4J process
07/10/18 10:54:45 [libopmnoc4j] WARNING: OC4J did not send the protocol value for port id: default-web-site
07/10/18 10:54:45 [libopmnoc4j] Port information in the ONS notification is incorrect for proc: 943261443. Some of the reasons for the failure are:
1. ajp, rmi and jms ports could not be bound by the process.
2. If a port value for a certain port ID is handed by OPMN to the OC4J process and this value is not returned back in the ONS notifications. For example, this can happen for certain bad JGroups related configurations. -
Error while creating parameterise view
I m getting below error while creating parameterise view
CREATE OR REPLACE VIEW rdr_le_info_view (v_run_number , v_isin_cob )
AS
SELECT l.strategic_le
,cun.ucn cunucn
,cun.date
,cccs.ucn ucn
,cccs.agr_num
FROM strat_le l
,ucn_name cun
,customer_setup cccs
WHERE l.gfa_until_dt = '31-dec-9999'
AND l.glas_until_dt = '31-dec-9999'
AND l.int_until_dt = '31-dec-9999'
AND cccs.run_num = v_run_num
AND cccs.ucn_lead_office = cun.ucn
AND cun.OID = l.client_oid;
AND cccs.run_num = v_run_num
ERROR at line 13:
ORA-00904: "V_RUN_NUM": invalid identifier
Plese help me in above.Try
CREATE OR REPLACE VIEW rdr_le_info_view
AS
SELECT l.strategic_le
,cun.ucn cunucn
,cun.date
,cccs.ucn ucn
,cccs.agr_num
FROM strat_le l
,ucn_name cun
,customer_setup cccs
,cccs.run_num run_num
WHERE l.gfa_until_dt = '31-dec-9999'
AND l.glas_until_dt = '31-dec-9999'
AND l.int_until_dt = '31-dec-9999'
AND cccs.ucn_lead_office = cun.ucn
AND cun.OID = l.client_oid;Then call it like:
select *
from rdr_le_info_view
where run_num = v_run_num; -
Error while starting weblogic server
Hi, I am getting following error while starting weblogic server
Unexpected Signal : 11 occurred at PC=0x40170bc5 Function name=fill_in_stack_trace__19java_lang_ThrowableG6HandleP6Thread
Library=/bea/jdk131/jre/lib/i386/client/libjvm.so
Current Java thread: at java.lang.Throwable.fillInStackTrace(Native Method) at
java.lang.Throwable.<init>(Throwable.java:78) at java.lang.Error.<init>(Error.java:37)
at java.lang.LinkageError.<init>(LinkageError.java:29) at java.lang.IncompatibleClassChangeError.<init>(IncompatibleClassChangeError.java:29)
at java.lang.AbstractMethodError.<init>(AbstractMethodError.java:30)
Environment : Weblogic 6.0 Sp2 on Linux Red hat 7.1
jdk 1.31
TIA
AshwaniHi,
1)Could you please try logging into sqlplus using using the below command :-
sqlplus "/ as sysdba"
2)Execute the below command to check if the password in expired :-
select username, account_status, expiry_date, where username='MDS username';
3)Change the password if the password has been expired by following the below command :-
alter user <user> identified by <password>;
4)Once the above steps are followed please login into the Weblogic Admin Console and follow the below steps:-
+ Go to DataSources ---> Select the MDS schema ----> change the password which was given in step no.3
+ Restart the Weblogic once again.
5)Lets us know the result.
Regards,
Prakash. -
Error while starting Soa Managed server on weblogic11g
Hi All,
I am facing one issue while starting the soa managed server on weblogic11g.
it gives error like :
"<Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.NoClassDefFoundError: java/lang/IOException.
java.lang.NoClassDefFoundError: java/lang/IOException
What can be done to get over this issue & start the soa server ???
Thanks & Regards,
NupurHi,
Full stack trace of log is :
<Apr 12, 2011 7:04:19 AM IST> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.NoClassDefFoundError: java/lang/IOException.
java.lang.NoClassDefFoundError: java/lang/IOException
at jrockit.ext.epoll.EPoll.epollCtl0(Native Method)
at jrockit.ext.epoll.EPoll.epollEnableOneshot(EPoll.java:87)
at weblogic.socket.EPollSocketMuxer.read(EPollSocketMuxer.java:84)
at weblogic.socket.BaseAbstractMuxableSocket.dispatch(BaseAbstractMuxableSocket.java:302)
at weblogic.socket.MuxableSocketDiscriminator.dispatch(MuxableSocketDiscriminator.java:177)
Truncated. see log file for complete stacktrace
>
<Apr 12, 2011 7:04:41 AM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'soademoDatabase1' due to error weblogic.application.ModuleException: .
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:290)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
Truncated. see log file for complete stacktrace
Caused By: weblogic.common.ResourceException: ORA-28001: the password has expired
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.makeConnection(XAConnectionEnvFactory.java:479)
at weblogic.jdbc.common.internal.XAConnectionEnvFactory.createResource(XAConnectionEnvFactory.java:173)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1193)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1117)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:244)
Truncated. see log file for complete stacktrace
Apr 12, 2011 7:05:49 AM IST> <Error> <Socket> <BEA-000405> <Uncaught Throwable in processSockets
java.lang.NoClassDefFoundError: java/lang/IOException.
java.lang.NoClassDefFoundError: java/lang/IOException
at jrockit.ext.epoll.EPoll.epollCtl0(Native Method)
at jrockit.ext.epoll.EPoll.epollEnableOneshot(EPoll.java:87)
at weblogic.socket.EPollSocketMuxer.read(EPollSocketMuxer.java:84)
at weblogic.socket.BaseAbstractMuxableSocket.dispatch(BaseAbstractMuxableSocket.java:302)
at weblogic.socket.MuxableSocketDiscriminator.dispatch(MuxableSocketDiscriminator.java:177)
Truncated. see log file for complete stacktrace
<Apr 12, 2011 7:05:53 AM IST> <Warning> <oracle.sdp.messaging.driver.base> <SDP-26024> <Registration of driver Email-Driver did not complete; will retry periodically until messaging server responds.>
<Apr 12, 2011 7:05:56 AM IST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'FtpAdapter' due to error weblogic.application.ModuleException: weblogic.connector.exception.RAException: Jndi Name is null or empty..
weblogic.application.ModuleException: weblogic.connector.exception.RAException: Jndi Name is null or empty.
at weblogic.connector.deploy.ConnectorModule.prepare(ConnectorModule.java:224)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
Truncated. see log file for complete stacktrace
No this is not a clustered environment.
yeah but under domains there are two domains we have created.
i.e. domains/ domain1 domain2
both are having soa servers as managed server.
in one domain soa is up but in domain2 it is not getting up causing above errors while starting.
FYI : It is causing problem now only.. before this , soa server on both the server have been up & running simultaneously.
Regards,
Nupur -
Error while starting BI Presentation Services in Windows XP
Hi All,
I am receiving error while starting presentation services in windows. When I checked Saw0.log file below is the error. I already searched forums posted here, but i do not see any solution given to this. Can anyone please help me on this. Its very urgent.
Type: Information
Severity: 30
Time: Tue Nov 24 21:35:26 2009
File: project/sawserver/sawserver.cpp Line: 335
Properties: ThreadID-2120
Location:
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Oracle BI Presentation Services 10.1.3.2 (Build 010607.1740) are starting up.
Type: Error
Severity: 20
Time: Tue Nov 24 21:35:26 2009
File: project/webodbcaccess/odbcenvironment.cpp Line: 98
Properties: ThreadID-2120
Location:
saw.webextensionbase.staticinit
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
ODBC driver preload failed. ODBC library name: 'nqsodbc.dll'
Type: Error
Severity: 20
Time: Tue Nov 24 21:35:26 2009
File: project/webodbcaccess/odbcenvironment.cpp Line: 100
Properties: ThreadID-2120
Location:
saw.webextensionbase.staticinit
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
The specified module could not be found.
Type: Error
Severity: 42
Time: Tue Nov 24 21:35:26 2009
File: project/webodbcaccess/odbcenvironment.cpp Line: 195
Properties: ThreadID-2120
Location:
saw.webextensionbase.staticinit
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Allocation of SQLEnvironment failed (SQLError: -1). Please ensure that the odbc driver is in your environment path.
Type: Error
Severity: 20
Time: Tue Nov 24 21:35:26 2009
File: project/sawserver/winmain.cpp Line: 74
Properties: ThreadID-2120
Location:
saw.sawserver.initializesawserver
saw.threads
Allocation of SQLEnvironment failed (SQLError: -1). Please ensure that the odbc driver is in your environment path.
Type: Error
Severity: 30
Time: Tue Nov 24 21:35:26 2009
File: project/webcomm/rpcserver.cpp Line: 145
Properties:
Location:
saw.unknown
Assertion failure: m_pImpl != 0 at line 145 of ./project/webcomm/rpcserver.cpp
Thanks in advance............
Regards
Sreekar Suri.Hi,
I had this problem after warehouse builder standalone installation. Looks like, it modified Environment variables.
Check Environment variables in control panel. I added these values to system path variable:
C:\OracleBI\server\Bin;C:\OracleBI\web\bin;C:\OracleBI\SQLAnywhere;C:\OracleBI\jdbc;
Though, not sure exactly which one helped, but now i have presentation services stared. -
Error while installing oracle 10g on AIX
I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl helpHi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios -
Error while starting Integrated Weblogic Server - Jdeveloper 11.1.1.4
I installed Jdevloper 11.1.1.4, and getting the below error while starting Integrated Weblogic Server:
[Waiting for the domain to finish building...]
[05:13:34 PM] Creating Integrated Weblogic domain...
The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully.
[05:14:53 PM] Error processing Integrated Weblogic domain:
I've checked for log files under my "C:\Documents and Settings\pramod.gujjeti\Application Data\JDeveloper\system11.1.1.4.37.59.23" directory but no error/exception is traced.
Then I tried the below:
Run from command line:
F:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd "C:\Documents and Settings\pramod.gujjeti\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.j2ee.adrs\CreateDefaultDomain.py"
" from DOS prompt I got "Error: ADRS_DOMAIN_PASSWORD environment variable not set."
After I set ADRS_DOMAIN_PASSWORD environment variable (value is weblogic1) the command line is throwing:
C:\Documents and Settings\pramod.gujjeti>F:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd "C:\Documents and Settings\pramod.gujjeti\Application Data\JDeveloper\sy
stem11.1.1.4.37.59.23\o.j2ee.adrs\CreateDefaultDomain.py"
CLASSPATH=F:\Oracle\Middleware\patch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;F:\Oracle\Middleware\patch_jdev1111\profiles\default\sys_manifes
t_classpath\weblogic_patch.jar;F:\Oracle\Middleware\jdk160_21\lib\tools.jar;F:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic_sp.jar;F:\Oracle\Middleware\wlserver_
10.3\server\lib\weblogic.jar;F:\Oracle\Middleware\modules\features\weblogic.server.modules_10.3.4.0.jar;F:\Oracle\Middleware\wlserver_10.3\server\lib\webservices.jar;F:
\Oracle\Middleware\modules\org.apache.ant_1.7.1/lib/ant-all.jar;F:\Oracle\Middleware\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar;;F:\Oracle\Middleware\o
racle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;F:\Oracle\Middleware\oracle_common\common\wlst\lib\adf-share-mbeans-wlst.jar;F:\Oracle\Middleware\oracle_common\c
ommon\wlst\lib\adfscripting.jar;F:\Oracle\Middleware\oracle_common\common\wlst\lib\mdswlst.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\auditwlst.jar;F:
\Oracle\Middleware\oracle_common\common\wlst\resources\igfwlsthelp.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\jps-wlst.jar;F:\Oracle\Middleware\oracle
_common\common\wlst\resources\jrf-wlst.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\oamap_help.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resour
ces\oamAuthnProvider.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap_help.jar;
F:\Oracle\Middleware\oracle_common\common\wlst\resources\ovdwlsthelp.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\sslconfigwlst.jar;F:\Oracle\Middleware
\oracle_common\common\wlst\resources\wsm-wlst.jar
PATH=F:\Oracle\Middleware\patch_wls1034\profiles\default\native;F:\Oracle\Middleware\patch_jdev1111\profiles\default\native;F:\Oracle\Middleware\wlserver_10.3\server\na
tive\win\32;F:\Oracle\Middleware\wlserver_10.3\server\bin;F:\Oracle\Middleware\modules\org.apache.ant_1.7.1\bin;F:\Oracle\Middleware\jdk160_21\jre\bin;F:\Oracle\Middlew
are\jdk160_21\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;F:\Oracle\Middleware\wlserver_10.3\server\native\win\32\oci920_8
Your environment has been set.
CLASSPATH=F:\Oracle\Middleware\patch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;F:\Oracle\Middleware\patch_jdev1111\profiles\default\sys_manifes
t_classpath\weblogic_patch.jar;F:\Oracle\Middleware\jdk160_21\lib\tools.jar;F:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic_sp.jar;F:\Oracle\Middleware\wlserver_
10.3\server\lib\weblogic.jar;F:\Oracle\Middleware\modules\features\weblogic.server.modules_10.3.4.0.jar;F:\Oracle\Middleware\wlserver_10.3\server\lib\webservices.jar;F:
\Oracle\Middleware\modules\org.apache.ant_1.7.1/lib/ant-all.jar;F:\Oracle\Middleware\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar;;F:\Oracle\Middleware\o
racle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;F:\Oracle\Middleware\oracle_common\common\wlst\lib\adf-share-mbeans-wlst.jar;F:\Oracle\Middleware\oracle_common\c
ommon\wlst\lib\adfscripting.jar;F:\Oracle\Middleware\oracle_common\common\wlst\lib\mdswlst.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\auditwlst.jar;F:
\Oracle\Middleware\oracle_common\common\wlst\resources\igfwlsthelp.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\jps-wlst.jar;F:\Oracle\Middleware\oracle
_common\common\wlst\resources\jrf-wlst.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\oamap_help.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resour
ces\oamAuthnProvider.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\ossoiap_help.jar;
F:\Oracle\Middleware\oracle_common\common\wlst\resources\ovdwlsthelp.jar;F:\Oracle\Middleware\oracle_common\common\wlst\resources\sslconfigwlst.jar;F:\Oracle\Middleware
\oracle_common\common\wlst\resources\wsm-wlst.jar;F:\Oracle\Middleware\utils\config\10.3\config-launch.jar;F:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbynet.
jar;F:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbyclient.jar;F:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbytools.jar;;
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Creating Default Domain
Reading template: /F:/Oracle/Middleware/wlserver_10.3/common/templates/domains/wls.jar
Setting Name to 'DefaultServer'
Setting ListenAddress to ''
Setting ListenPort to 7101
Setting domain administrator to 'weblogic'
Setting domain password.
Writing domain: /C:/Documents and Settings/pramod.gujjeti/Application Data/JDeveloper/system11.1.1.4.37.59.23/DefaultDomain/
Closing template.
Reading domain: /C:/Documents and Settings/pramod.gujjeti/Application Data/JDeveloper/system11.1.1.4.37.59.23/DefaultDomain/
Adding domain extension template: /F:/Oracle/Middleware/jdeveloper/common/templates/jdeveloper/adrs_template.jar
Adding domain extension template: /F:/Oracle/Middleware/jdeveloper/common/templates/domains/jsf_template_1.2.9.0.jar
Adding domain extension template: /F:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar
Error: addTemplate() failed. Do dumpStack() to see details.
Problem invoking WLST - Traceback (innermost last):
File "C:\Documents and Settings\pramod.gujjeti\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.j2ee.adrs\CreateDefaultDomain.py", line 100, in ?
File "C:\Documents and Settings\pramod.gujjeti\Local Settings\Temp\WLSTOfflineIni5328235009276840957.py", line 89, in addTemplate
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.addTemplate(WLScriptContext.java:420)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: com.oracle.cie.domai
n.ConfigGroupsException: Multiple definitions of server-group JRF-ADMIN-SVR are not allowed
C:\Documents and Settings\pramod.gujjeti>
Appreciate your help in advance!
Thanks,
Pramod GujjetiI could see no helpful resolution of the issue in the mentioned thread. Please let me know if I'm missing anything!
-
Error while starting oam managed server
Hi Experts,
I am facing the following errors while starting the managed oam server instance.
I am using 11gR2.
<Jan 8, 2013 12:13:32 PM IST> <Error> <oracle.jps.audit> <BEA-000000> <IAU:IAU-5
048: Problem in transferring audit record to Audit Store null null. Please verif
y your Audit Store configuration>
<Jan 8, 2013 12:13:49 PM IST> <Error> <oracle.security.audit.logger> <BEA-000000
<IAU:JNDI Resource does not exist JNDI Name=AuditDB><Jan 8, 2013 12:13:49 PM IST> <Error> <oracle.jps.audit> <BEA-000000> <IAU:IAU-5
047: Problem in transferring audit record from file:C:\Oracle\MIDDLE~1\USER_P~1\
domains\OAM_OA~3\servers\oam_server1\logs\auditlogs\OAM\audit.log position:898,9
24 will retry in next cycle. caught exception oracle.security.audit.AuditExcepti
on: javax.naming.NameNotFoundException: Unable to resolve 'AuditDB'. Resolved ''
; remaining name 'AuditDB'
at oracle.security.audit.ajl.loader.OracleRepository.<init>(OracleReposi
tory.java:84)
at oracle.security.audit.ajl.loader.JDBCLogWriter.reinit(JDBCLogWriter.j
ava:59)
at oracle.security.audit.ajl.loader.JDBCLogWriter.write(JDBCLogWriter.ja
va:104)
at oracle.security.audit.ajl.loader.AuditLoader.readMessages(AuditLoader
.java:488)
at oracle.security.audit.service.AuditLoaderManager.readMessages(AuditLo
aderManager.java:209)
at oracle.security.audit.service.AuditLoaderManager$Runner.run(AuditLoad
erManager.java:284)
Caused by: javax.naming.NameNotFoundException: Unable to resolve 'AuditDB'. Reso
lved ''; remaining name 'AuditDB'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(Basic
NamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.jav
a:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.j
ava:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:20
6)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.j
ava:254)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:412)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at oracle.security.audit.ajl.loader.OracleRepository.<init>(OracleReposi
tory.java:74)
... 5 more
Any pointers would be appreciated.
Thanks,
SubinHi Subin,
Once the server is started, is Auditing to DB successful?
Assuming that you have auditing to DB configured and that it is generally working, I suspect that the errors messages are occurring during the time when the server is making the jndi sources available to the server. If so, the messages are harmless (although I do not think they should happen).
Regards,
Colin
Maybe you are looking for
-
How to format new HD and do a fresh install on used computer
i just bought a new-to-me used mac pro with a new hard drive and i want to install yosemite on this drive. i haven't done this before so i am at a bit of a loss. the hard drive is not formatted since it is a new hard drive and there is no data on it.
-
JDBC adapter taking too much time for inserting
we` have given a "update insert" query to be used in the JDBC adapter to insert these records into the database. Consists of 3 tables with 29fields in first, 4 fields in the other two. While message in XI gets processed in just 1-3 secs, the database
-
Hello, I ordered something a few days ago and with it I chose to get the Express shipping (set to be delivered on Tuesday the 21st). However since then the Order Status has remained the same, I'm wondering if my purchase is still on time, or if ther
-
How to hide left frame on iSupport help pages?
Hi friends, [Apps: 11.5.10.2 - DB: 10g] I'm trying to hide the left frame on iSupport help pages. I've seen that this is directly in relation with a profile option named: HELP_TREE_ROOT (Root Help System) But the funcionallity is veru peculiar: If
-
I have a Lynksys WRT54G wireless router. It works just fine until I try to put a password on it. I go through the basic steps, it talkes all my information and tells me everything is good. I try to sign on the internet and it tells me my password