Error while transporting database index into quality system
Hello,
I am getting an error while transporting a new index in quality system.
I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
I retransported the objects using a new request. However I still got the same error.
Please help.
Navin,
No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
K.Kiran.
Similar Messages
-
Error While importing SAP query into quality system
Hi,
When Itried to import the dataset(Transport Request) generated in develoment system into Quality system I am getting the following error.
Query already exists and Infoset contains a structures which is not there in data dictionary .
How to oversome this error to import successfully into quality system
thankshi,
You need to transport your Z tables to the quality.
Make sure you transport all the data elements , domain.. etc to the quality.
Thats why its giving you the error.
It does not find the Z tables in Quality
Regards,
Vinod -
Error in transporting the Transformation to Quality system
Hi All,
I am trying to transport the transformation which has field level routine as well as start and end routine.
I have basically ehanced the standard routine and it works perfectly fine in dev server . I have even loaded the data and generated reports on this cube.
Now i am trying to transport it to Quality system. It throws up some "syntax error in routine" error. Very strange.
All my routine in Dev is working but during transport ther is some issue.
i saw some post on same but they are suggesting to regenerate a new transformation. For me this will be a nightmare as there are so many routnies at field level and as end routine.
Kindly suggest how can i rectify this error.
Note:- I had generated this transformation via old update rules with Migration function.
Thanks & Regards,
AnupHi Anindya,
Below is my source code for one field level routine in transformation.
FORM routine_0080
TABLES
p_monitor STRUCTURE rsmonitor
USING
COMM_STRUCTURE TYPE _ty_s_sc_1__rule_52
CHANGING
RESULT TYPE _ty_s_tg_1_full-srvclen
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
* init variables
* fill the internal table "MONITOR", to make monitor entries
DATA: ultimo LIKE sy-datum.
IF g_record_no <> RECORD_NO.
g_record_no = RECORD_NO.
CLEAR: employee_wa, person_wa.
CLEAR: employee_md, person_md.
ENDIF.
PERFORM read_md_employee
USING COMM_STRUCTURE-employee
COMM_STRUCTURE-calday
RECORD_NO
RECORD_ALL
SOURCE_SYSTEM
CHANGING employee_wa
RETURNCODE.
employee_md = employee_wa.
PERFORM calculate_ultimo
USING COMM_STRUCTURE-calday+0(6)
RECORD_NO
RECORD_ALL
SOURCE_SYSTEM
CHANGING ultimo
RETURNCODE.
IF NOT employee_md-entrydate IS INITIAL.
RESULT = ultimo+0(4) - employee_md-entrydate+0(4).
IF ultimo+4(4) LT employee_md-entrydate+4(4).
RESULT = RESULT - 1.
ENDIF.
ENDIF.
* result value of the routine
* if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
* if abort is not equal zero, the update process will be canceled
ABORT = 0.
p_monitor[] = MONITOR[].
CLEAR:
MONITOR[].
CLASS lcl_transform IMPLEMENTATION.
METHOD compute_0AGE_RANGE.
* IMPORTING
* request type rsrequest
* datapackid type rsdatapid
* SOURCE_FIELDS-CALDAY TYPE /BI0/OICALDAY
* SOURCE_FIELDS-EMPLOYEE TYPE /BI0/OIEMPLOYEE
* EXPORTING
* RESULT type _ty_s_TG_1-AGE_RANGE
DATA:
MONITOR_REC TYPE rsmonitor.
*$*$ begin of routine - insert your code only below this line *-*
Data:
COMM_STRUCTURE type _ty_s_SC_1__RULE_20,
l_subrc type sy-tabix,
l_abort type sy-tabix,
ls_monitor TYPE rsmonitor,
ls_monitor_recno TYPE rsmonitors.
data:
l_monitor type standard table of rsmonitor.
REFRESH:
MONITOR.
* Runtime attributs
SOURCE_SYSTEM = p_r_request->get_logsys( ).
MOVE-CORRESPONDING SOURCE_FIELDS to COMM_STRUCTURE.
* Migrated update rule call
Perform routine_0070
TABLES
l_monitor
USING
COMM_STRUCTURE
CHANGING
RESULT
l_subrc
l_abort.
*-- Convert Messages in Transformation format
LOOP AT l_monitor INTO ls_monitor.
move-CORRESPONDING ls_monitor to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
IF l_subrc <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD.
ENDIF.
IF l_abort <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDIF.
I am not able to change the code which are marked with " * ". Where can i change the code here?
Regards,
Anup -
Transport Error while transporting ID TR (Target Business System not found)
Hi Gurus,
We are facing a issue with transports while transporting a ID transport to Prod from QA.(We are using CTS+)
Its our first transport to PROD and we have checked the configuration for BC Application Server in Administration ->Content Maintenance and all looks good .
Our SLD is looks as below
We have shared SLD for Dev and QA and it looks as below
Dev's BS has target business system of QA BS
And in Prod Sld looks like as below
QA's BS has target business system of Prod BS
When we transport from Dev To QA transport works fine but when we transport from QA to Prod its gives below error and in error its points that target for Dev business system is not found in Target SLD.
We thought we should try to point Dev BS ====>>Prod BS may be that might work work but its also giving error same error.
Below mentioned is the Error
class java.rmi.RemoteException:
ClientServerException exception:Import failed because of business system transfer of object Service BS_ACN_MDH_DEV:Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
com.sap.aii.ib.core.transport.api.TransportCsException: Import failed because of business systemtransfer of object Service BS_ACN_MDH_DEV: Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.postprocessTransport(TransportPostprocessor.java:741)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.DirImportPostprocessor.postprocess30Import(DirImportPostprocessor.java:62)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.InternalPostprocessingService.postprocess(InternalPostprocessingService.java:205)
#at com.sap.aii.ibdir.server.transport.impl.postprocessing.PostprocessingService.doPostprocessing(PostprocessingService.java:171)
#at com.sap.aii.ibdir.server.pvcadapt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:90)
#at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:107)
#atcom.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
#atcom.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:142)
#at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:721)
#at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importXiStream(InternalTransportServiceImpl.java:500)
#at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importXiStream(TransportServiceImpl.java:265)
#at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:306)
#at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
#atcom.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
#at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
#at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl1_0.process(HmisLocalLocalObjectImpl1_0.java:144)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
#at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
#at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
Can you guys please help out in resolving this error.
Thanks in Advance.Hi,
I assume you have two SLDs(SLD1 - for Dev and QA , SLD2 - for Prod) and PI 7.0 or XI 3.0.
In this case the ideal solution would be to
1. set up a SLD bridge between your Dev/QA SLD and Prod SLD. The bridge basically forwards all the Technical system SLD info to Prod. SLD.
2. Import Dev business systems information into Prod.
3. Then create transport target,
Make sure that you have created Business Groups for Dev/QA/Prod properly
Edited by: Nageshwar Reddy on Mar 17, 2009 8:29 AM -
Error while transporting the request from quality to production of BI
Dear all,
When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
Execution of programs after import (XPRA)
Transport request : RBDK904992
System : RBP
tp path : tp
Version and release: 372.04.04 700
Post-import methods for change/transport request: RBDK904992
Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import methods of change/transport request RBDK904992 completed
Start of subsequent processing ... 20080406140407
End of subsequent processing... 20080406140408
Execute reports for change/transport request: RBDK904992
Reports for change/transport request RBDK904992 have been executed
Start of................ 20080406140408
End of.................. 20080406140408
Execution of programs after import (XPRA)
End date and time : 20080406140408
Ended with return code: ===> 8 <===
Thanks in advance.
Regards,
M.MHi,
First try to figure out the object type from the text obtained by following steps above.
Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
Hope it helps.
Regards
Mr Kapadia -
Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Hi,
I am getting following error while transporting export DataSource to quality system.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Transformation does not exist (see long text)
Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
Regards,
Pranav.
Edited by: P D on Sep 20, 2010 9:02 AMHi
might be your data source not collected into transport request.
If you are moving data source from once system to other system, this may missed.
RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
When ever we are moving objects from one system to other follow below are order to avoid failures
1).New Infoobjects.
2). Data source/Infosource
3). Info Providers ( Cube/DSo)
4). Update rules/Transformation
5).Impacted objects and other
Mahesh. -
Error while transporting Transformation: Syntax error in Start Routine
Hi Everyone,
I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
'Start Routine: Syntax error in routine'
I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
Any suggestions on the steps I could take to transport the transformation to my quality system?
Thanks,
RamHi Ajay, Shanthi, svu and Ray
I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package). -
Error while transporting 0MAT_PLANT
Hi Experts
I am getting error while transporting 0MAT-PLANT to Prod System.It going fine to QA system.
it is giving the follwoing error with return code 8
Characteristic 0MAT_PLANT: Master data has to be activated before conversion
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
I have deleted one Info-object (Key figure) and added one info-object(Key figure) to 0MAT_PLANT ,transported still it is giving errors it is going fine to QA.
1.Is it because we have large no of records in Prod system ..??
2.Do we need to delete the data in Prod for 0MAT_PLANT and transport....????
3.Is it related to any database error in adjusting P table in Prod...?
Please let me know anybody faced this kind of problem.
Regards
PrasadHi Prasad,
Just to summarise the discussion. If you need to send the transport successfully you need to the following steps:
1. MD (complete) needs to be deleted from IOBJ. Please note, unless you delete the TD data involving the IOBJ, you will not be able to delete MD completely.
The reason being, the SID's for the MD are being used in the various IC/DSOs. So you need to go by deleting related TD and then MD.
2. Secondly, if you forcibly delete for 'P' and 'S' table using the SE14-> Table Name -> Delete Data & adjust Db. This will cause lot of inconsistencies on Drill Down in reports and even on execution as SID values are missing!
Moreover, as you said there are around 10/12 InfoProviders involved here, then this forcefull deletion can cause a real imapct to your Prod system and make many reports unsusable! So pls be careful!
Please decide accordingly as there is a trade off here!
-VA
Edited by: Vishwa Anand on Sep 27, 2010 12:15 PM -
Error : While Importing the Objects in Quality
Dear all,
I'm facing some error while transporting the Objects to quality server. The error's like
Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Activation Mode)
Source system RD1100LS does not exist
Source system RD1100LS does not exist
Source system RD1100LS does not exist
Source system RD1110LS does not exist
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
There is no DataSource with these attributes
Anyone suggest me how to solve this error..,
Thanx in Advance..
Regards,
SaranHi saran,
Check the source system connectivity of the Quality system. Also check whether you have transported the datasources related to those objects that you transported from DEV to QAS.
First you need to transport the Datasources created in R/3 and then replicate them in QAS/Prod and then transport the objects in BW from DEV to QAS/Prod.
Check all these things and if still the problem persists... Refer to the below threads which may help u...
Transport Problem - Reference to Transfer Structure not available
No Source system exist
Assign points if this helps u...
Regards,
KK. -
Errors have occured while transferring the document into another system.
Hi GURUs,
Please help me to come out from this problem........
An error has occured in the system YDQCLNT100 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occured while transferring the document into another system. Refer to the attached log for error messages.
Transmission log
Product cannot be recoded for R/3 System YDQCLNT100 (Notification E CRM_ORDER_MISC 015)
Product cannot be recoded for R/3 System YDQCLNT100 (Notification E CRM_ORDER_MISC 015)
Please suggest something ASAP....
i'll be highly Grateful to you.....
Regards,
AnkurHi Gangadhar,
Can you plz explain me elaborately, where should i check for partner function of the equipment and how this partner function is related to this issue.
I think partner function will be there only for BP. Can you plz clarify me.
Thanks in advance
Ankur -
Table could not be activated - Error while transport
Hi all,
I've created a table in one server under a transport request. Co-file and data-file are download for the same and imported into another system (development server). Import is successful and working fine. But, while transporting the table to quality server following error is coming even table is activated.
Table TABNAME could not be activated (E- Nametab for table TABNAME cannot be generated )
Kindly let me know what might be the problem.
Thanks in Advance.Hi Siva,
First check Transport request for extended check and consistency check. You will get errors. If there is no errors then goto se14
database utility and give the table name and click edit and select the adjust database table . Your problem will be solved.
Let me know if you have any further errors while doing this.
thank you
srinivas -
Hi,
I have this strange problem. I have added some transformation , DTP , infopackage and routines to existing data flow.
I have put them in a single request and tried to transport them to quality server.
Now I am getting error while moving it to the quality.
The error log says that one of the transformation has error in start routine. Where is that transformation doesn't exist in the system, not in active as well as inactive mode. I have checked in RSA1 as well as table 'RSTRAN'.
Same problem with some of the DTPs as well. They are in error and they doesn't exist in the system( table RSBKDTP).
Kindly help. Am I missing something.
Regards
VivekHi,
I have narrowed the problem. I had 4 transformation in that req, Now I have separate req for each transformation. Out of 4 req 3 has been transported successfully. Now I am having trouble with a single transformation and cause of the error is piece of code in include which I am using in a start routines.
LOOP AT source_package INTO ls_sourcepackage.
ls_i_mat-fpc = ls_sourcepackage-/BIC/dpmat. >> If I comment this line req get transported.
APPEND ls_i_mat TO i_mat.
ENDLOOP.
/BIC/dpmat is fiield in the structure of source package.
I am confuse why its giving trouble. The above transformation is from DataSource to Cube.
Regards
Vivek -
Error while transporting Queries
Hi,
I am getting this error while transporting queries!!
Object '!ZTIC_UKA' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '!ZTIC_UKA' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing
ThanksHi Murali,
YOu are trying to transport the element ZTIC_UKA' of the query,may be an variable which is not colelcted in the request.
Try to transport the query through RSA1> Transport connection->Query-->give you query name -->Drag and Drop to Right hand side and Click on collect all dependent objects and check whetehr they have collected in the same request.Make sure ur variables are collected.
Tranport it now and Check.
Rgds
SVU123
Edited by: svu123 on Mar 4, 2010 7:41 AM -
Error while transporting Openhub (BI7)
Hi Gurus,
I am getting an error while transporting the open hub. In the dev system it worked perfectly but when i transport it to quality, it is showing the following error.
"Unable to activate table /BIC/OHZxxxxxx ."
When i checked the table in quality it says that /BIC?OHZxxxxx-0UNIT ( Reference field ) does not exists. But 0UNIT is there in the DSO on which i developed the openhub and the infoobject 0unit is also active in quality system.
Why this error is happening?
Regards,
Raghavendra.Hi Raghavendra,
There are chances of missing some objects in transport request wile assigning objects to request...please check the objects list and open hub structure.
and also plsease check the 0Unit field status in Quality system.if it is in modified status means make it it active ststus.
Please create one more transport request and validate the tr objects...
Best Regards,
maruthi -
Getting 500 Internal Server Error while tryig to log into freshly upgraded
Hi
Getting 500 Internal Server Error while tryig to log into freshly R12 upgraded.
Below is the application.log messages.
=================================================================================================
12/12/31 10:02:22.295 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:41)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:71)
at java.nio.channels.Channels.access$000(Channels.java:58)
at java.nio.channels.Channels$1.write(Channels.java:145)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:735)
13/01/01 23:22:07.988 html: Servlet error
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.lang.RuntimeException: oracle.apps.fnd.common.AppsException: java.sql.SQLException: The Network Adapter could not establish the connection;
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:886)
at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(OAExceptionUtils.java:1017)
at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(OACommonUtils.java:901)
at oracle.apps.fnd.framework.webui.OAServerDelegate.releaseWebAppsContext(OAServerDelegate.java:1823)
at oracle.apps.fnd.framework.webui.OAJSPHelper.handleErrorStackDisplay(OAJSPHelper.java:1455)
at OAErrorPage.jspService(_OAErrorPage.java:257)
13/01/01 23:41:46.338 html: Error initializing servlet
java.lang.NoClassDefFoundError: oracle.apps.fnd.sso.Utils (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:140)
at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:221)
at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:287)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2379)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4830)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4754)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2978)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:738)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:735)
Caused by: java.lang.ExceptionInInitializerError
at java.lang.J9VMInternals.initialize(J9VMInternals.java:222)
at oracle.apps.fnd.sso.Utils.<clinit>(Utils.java:674)
at java.lang.J9VMInternals.initializeImpl(Native Method)
=================================================================================================
Current workaround is bouncing the oacore services.
Already raised the SR with Oracle.
Oracle support analyst suggesting to upgrade the JDK version from SR2 to SR11 or higher to fix this issue.
Please let us know any other tips to fix this issue.
Regards,
JagadeeshaHi,
I have gone through the docs. , not use full. Please find the inline comments for the same.
E-Business Suite Users Experience Intermittent HTTP-500 Errors and Database Connection Errors [ID 1314433.1] -- No solution
R12: Http Server Crashing Frequently With Segmentation Fault (NAS or SAN filesystem) [ID 732857.1] -- Already it is under local file system only.
How to resolve Broken Pipe errors in E-Business Suite R12 ? [ID 1480156.1] -- No solution
Autoconfig is completed wihtout any errors.
I have not chedked the database log file. I will check and update you soon.
Cheers,
Jagadeesha
Maybe you are looking for
-
How to retrive firstname,middlename and lastname in a table
Hi all, Please can u help me anyone. example: EMP table Ename column ramesh sachin tendulkar vara prasad bala how to display firstname,middlename,lastname in a emp table using oracle 9i. firstname middlename lastname ramesh sachin tendulkar vara pras
-
My Epson printer just failed and I have recycled it. I customarily left it turned on 24/7 (unless I was going to be away for an extended time). I have just added a HP Photosmart Premium C310 Series. My question is what is the best practice with this
-
Send SO IDOC while creating DO for consignment fill up
Hi all, I have a situation now that for consignment fill up, while create the DO, then I need to send out a complete SO IDOC to 3rd-party (also a SAP). Any idea on how to do this? Please help. Running out of ideas now. Million thanks. Best Regards, J
-
Error CK048 in Production order Create ( CO01 )
Hi all. Good New Year. I've deleted some costs elements in 01012009. But in transaction CO01, The system displays the error CK048 saying that "NO COST ELEMENT SEGMENT EXISTS FOR THE DATE" . In the OKB9 and KAH3 I haven't relation with the cost elemen
-
How to import mpg files into imove
trying to import Sony MPG files into imove anyone got some good software to use?