Error while try to develop a program
Hi,
After log into ES work place when i try to create the program through SE38 Transaction am getting below error.
You are not authorized to make changes (authorization object S_DEVELOP).
Please let me know how can i develop the programs.
Hello,
It appears that you do not have sufficient authorisations to develop programs ...
Use tcode SU01 to add a profile or role that contains sufficient authorisations for the authority object S_DEVELOP.
Someone from the SAP security team can help you with this.
Success.
Wim
Similar Messages
-
When i try to install iTunes in my Windows 7, this error message apear "Error while writing to file: C: \ Program Files (x86) \ iTunes \ iTunes.Resources \ el.Iproj \ iTunesExtrasDownload.png. Make sure you have access to this directory." Someone help me!!
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Error while starting SQL Developer (3.1.07)
I am using SQL Developer 3.1.07 on Windows 7.
Today, all on a sudden it is giving me error while starting SQL Developer.
Please help me how to fix this problem.
The error message is:
<code>
java.lang.NullPointerException
at oracle.jdevimpl.vcs.svn.SVNProfile.canActivate(SVNProfile.java:162)
at oracle.jdevimpl.vcs.generic.GenericClient.fireCanActivate(GenericClient.java:1629)
at oracle.jdevimpl.vcs.generic.GenericClient.canActivate(GenericClient.java:237)
at oracle.jdevimpl.vcs.VCSManagerImpl$6.addinsLoaded(VCSManagerImpl.java:391)
at oracle.ide.IdeCore.fireIdeEvent(IdeCore.java:864)
at oracle.ide.IdeCore.access$100(IdeCore.java:136)
at oracle.ide.IdeCore$3.run(IdeCore.java:836)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
</code>It appears the SVN plug-in is giving you troubles, normally you should be able to disable it from
Tools -> Preferences -> Extensions -> Versioning SupportAssuming you do not need it.
Since your system is no longer starting you might have to manually remove the related jar file from the installation, this file is usually located in:
[SQLDev_install_dir]/jdev/extensionsand it's name is:
oracle.jdeveloper.subversion.jar -
Error while creating a Development plan template
Hi Gurus,
I am facing errors while creating Development Plan Template.
This is how it goes :
When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
Now after clicking next, I am adding 2 development areas :
1) Training
2) Mentoring,
now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
error2 : Value type 000000XXX of value class Q does not exists
Warning 1 : You have maintained a description that is not displayed.
In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
Kindly let me know how to proceed further.
Regards
bhartiHi,
Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
But when I run the Concurent program and see the output,the output still shows me the old template.
Regards
Jujaar -
How to avoid error while install oracle developer suite10g(forms & reports)
hi dear all in recent times i am trying to install oracle developer suite 10g to learn forms and reports in my lap having windows 7 ultimate version ,32 bit,2.56 GB of ram .I downloaded two files ds_windows_x86_101202_disk1 and ds_window_x86_101202_disk2 and i downloaded Oracle universal Installer but i am unable to complete installation process ,When i click on complete(1.11gb) version which include forms,reports,xml,j developer I am facing this type of error message
"Install has encountered an error while attempting to verify your virtual settings.please verify that the sum of the initial sizes of the paging files is at least 256 mb"
Could any one help how to avoid this type of error message ? or else is there any other way to download Oracle forms and reports versionOk, Oracle Developer Suite (ODS) 10g (Forms/Reports) was not designed for Windows 7. In order to the ODS you must follow these steps for the installation to be successful.
1. You must set the Virtual Memory (VM) size. The Oracle installer can not read Windows Managed VM. See the Microsoft article Change the size of virtual memory for more information on setting the VM size.
2. The Oracle Installer does not recognize the internal version number of Windows 7, so you have to set the compatibility mode on the Setup.exe to Windows XP. Right-Click the SETUP.EXE and select properties. Then click the Compatibility Tab and in the Compatibility Mode area set this to "Run this program in compatibility mode" and select "Windows XP SP3".
3. You must run the ODS setup.exe as the Administrator. Right-click the setup.exe and select "Run as Administrator".
Having done these three steps, your installation should be successful.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Error while using jump developer desktop
Buildfile: J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\ant\build.xml
JumpEngineInit:
[echo] ============================================================================
[echo] Starting Jump for HelloWorld [SonyEricsson J300 -> RIM Blackberry 8310]
[echo] ============================================================================
[jump-engine-init] Jump event has been logged
[null] Copying 1 file to J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\jump.context\packagingContext
Time: 5.72s
[delete] Deleting 1 files from J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\weaved-src
[copy] Copying 1 file to J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\jump.context\sourceContext
[copy] Copying 2 files to J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\jump.context\sourceContext
ResourceJumplets:
[jumplet-execute] Import Target Device Libraries (rev 7)
[jumplet-execute] Connected to service at: http://services.tirajump.com/
Overriding previous definition of reference to eclipse.ant.targetVector
init:
build:
[echo] building 2FA03D635AE5EC98647CD9231118FBD10DD7FEB: C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC98647CD9231118FBD10DD7FEB\7\build.xml
[Import Target Device Libraries] C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC98647CD9231118FBD10DD7FEB\7\TargetLib
[Import Target Device Libraries] C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins/com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs
[Import Target Device Libraries] Executing Import Target Device Libraries
[Import Target Device Libraries] Jumplet: [Import Target Device Libraries], Execution SUCCEEDED, Time: 0 seconds
[jumplet-execute] Modify Icon (rev 0)
Overriding previous definition of reference to eclipse.ant.targetVector
init:
build:
[echo] building 658C57EA51966AD0728D0660118EBB1C648720F: C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\658C57EA51966AD0728D0660118EBB1C648720F\0\build.xml
[Modify Icon] Executing Modify Icon
[Modify Icon] Interpolation in DB: bilinear
[Modify Icon] Jumplet: [Modify Icon], Execution SUCCEEDED, Time: 0.02 seconds
ResourceToSourceTransition:
SourceJumplets:
[jump-weaver-init] Initializing Jump Weaver port: 20080 timeout: 300
[jump-weaver-init] adding to JumpPlatform.Plugin.classpath: C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins\com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs\cldc11.zip
[jump-weaver-init] adding to JumpPlatform.Plugin.classpath: C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins\com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs\midpapi20.zip
[jump-weaver-init] adding to JumpPlatform.Plugin.classpath: C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins\com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs\mmapi.zip
[jump-weaver-init] adding to JumpPlatform.Plugin.classpath: C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins\com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs\wma.zip
[jump-weaver-init] adding to JumpPlatform.Plugin.classpath: C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins\com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs\jsr184.zip
[jump-weaver-init] Connecting to weaver attempt 1
[jump-weaver-init] Time: 3.38s
[jumplet-execute] Nokia sound to MIDP 2.0 Implementation (rev 6)
Overriding previous definition of reference to eclipse.ant.targetVector
init:
[mkdir] Created dir: C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC98429F61DA110B27B63578000\6\antbin
build:
[echo] building 2FA03D635AE5EC98429F61DA110B27B63578000: C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC98429F61DA110B27B63578000\6\build.xml
[javac] Compiling 2 source files to C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC98429F61DA110B27B63578000\6\antbin
[jar] Building jar: C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC98429F61DA110B27B63578000\6\2FA03D635AE5EC98429F61DA110B27B63578000.jar
[Nokia sound to MIDP 2.0 Implementation] Executing Nokia API using Midp 2 impl
[Nokia sound to MIDP 2.0 Implementation] Jumplet: [Nokia sound to MIDP 2.0 Implementation], Execution SUCCEEDED, Time: 0.47 seconds
[jumplet-execute] Nokia UI to MIDP 2.0 Implementation (rev 7)
Overriding previous definition of reference to eclipse.ant.targetVector
init:
[mkdir] Created dir: C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC98569C1795112244638067B8A\7\antbin
build:
[echo] building 2FA03D635AE5EC98569C1795112244638067B8A: C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC98569C1795112244638067B8A\7\build.xml
[javac] Compiling 2 source files to C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC98569C1795112244638067B8A\7\antbin
[jar] Building jar: C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC98569C1795112244638067B8A\7\2FA03D635AE5EC98569C1795112244638067B8A.jar
[Nokia UI to MIDP 2.0 Implementation] Executing Nokia UI to MIDP2.0 impl
[Nokia UI to MIDP 2.0 Implementation] Jumplet: [Nokia UI to MIDP 2.0 Implementation], Execution SUCCEEDED, Time: 0.19 seconds
[jumplet-execute] Key Mapping (rev 12)
Overriding previous definition of reference to eclipse.ant.targetVector
init:
build:
[echo] building 2FA03D635AE5EC9855560CB4110E06C1C647FF8: C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC9855560CB4110E06C1C647FF8\12\build.xml
[Key Mapping] Executing Key Mapping
[Key Mapping] Could not map reference device: Key_EndCall
[Key Mapping] Could not map reference device: Key_Send
[Key Mapping] Could not map reference device: RightSoftKey
[Key Mapping] Could not map reference device: LeftSoftKey
[Key Mapping] Could not map reference device: Key_2
[Key Mapping] Jumplet: [Key Mapping], Execution SUCCEEDED, Time: 1.45 seconds
SourceToBytecodeTransition:
[copy] Copying 12 files to J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\weaved-src
Overriding previous definition of reference to JumpPlatform.app.compile.classpath
[javac] Compiling 10 source files to J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\jump.context\bytecodeContext
BytecodeJumplets:
BytecodeToPackagingTransition:
[jump-package] **************************************************************
[jump-package] * Antenna 0.9.15 initialized for project "Jump" *
[jump-package] * Using Sun Wireless Toolkit 2.5 (CLDC-1.1; MIDP-2.0) *
[jump-package] **************************************************************
[jump-package] Building jar: J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\jump.context\packagingContext\HelloWorld-RIM-Blackberry-8310.jar
[jump-package] Updating JAD file J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\jump.context\packagingContext\HelloWorld-RIM-Blackberry-8310.jad
[jump-package] Removing Ant-Version from manifest
[jump-package] Removing Created-By from manifest
[jump-package] MIDlet-Jar-URL:HelloWorld-RIM-Blackberry-8310.jar
[jump-package] MIDlet-Jar-Size:12986
PackagingJumplets:
[jumplet-execute] Obfuscation (rev 10)
Overriding previous definition of reference to eclipse.ant.targetVector
init:
build:
[echo] building 2FA03D635AE5EC981A3CAF81106FCB092B7FE3: C:\Documents and Settings\Administrator\.tirawireless\jump\jumplets-cache\2FA03D635AE5EC981A3CAF81106FCB092B7FE3\10\build.xml
[Obfuscation] Proguard Obfuscator: proguard39.jar
[Obfuscation] Executing Obfuscation
[exec] ProGuard, version 3.9
[exec] Reading program jar [J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\jump.context\packagingContext\HelloWorld-RIM-Blackberry-8310.jar]
[exec] Reading library zip [C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins\com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs\cldc11.zip]
[exec] Reading library zip [C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins\com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs\midpapi20.zip]
[exec] Reading library zip [C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins\com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs\mmapi.zip]
[exec] Note: duplicate definition of library class [javax.microedition.media.TimeBase]
[exec] Note: duplicate definition of library class [javax.microedition.media.protocol.DataSource]
[exec] Note: duplicate definition of library class [javax.microedition.media.control.ToneControl]
[exec] Note: duplicate definition of library class [javax.microedition.media.control.VolumeControl]
[exec] Note: duplicate definition of library class [javax.microedition.media.Control]
[exec] Note: duplicate definition of library class [javax.microedition.media.Controllable]
[exec] Note: duplicate definition of library class [javax.microedition.media.Manager]
[exec] Note: duplicate definition of library class [javax.microedition.media.MediaException]
[exec] Note: duplicate definition of library class [javax.microedition.media.Player]
[exec] Note: duplicate definition of library class [javax.microedition.media.PlayerListener]
[exec] Reading library zip [C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins\com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs\wma.zip]
[exec] Reading library zip [C:\Program Files\Tira Wireless\Jump Developer Desktop\eclipse\plugins\com.tirawireless.jumpdesktop.platform.sdk_4.1.0.142\device_stubs\jsr184.zip]
[exec] Note: there were 10 duplicate class definitions.
[exec] Error: You have to specify '-keep' options for the shrinking step.
[exec] Result: 1
[Obfuscation] Jumplet: [Obfuscation] FAILED: Obfuscator could not create a new JAR
[Obfuscation] com.tirawireless.jumpdesktop.platform.sdk.exceptions.JumpProcessException: Obfuscator could not create a new JAR
[Obfuscation] at com.tirawireless.jumplets.obfuscators.AbstractObfuscator.cleanup(AbstractObfuscator.java:64)
[Obfuscation] at com.tirawireless.jumplets.obfuscators.Proguard.cleanup(Proguard.java:107)
[Obfuscation] at com.tirawireless.jumplets.Obfuscator.jumpletExecute(Obfuscator.java:155)
[Obfuscation] at com.tirawireless.jumpdesktop.platform.core.ant.task.JumpletExecuteTask.executeJumplet(JumpletExecuteTask.java:452)
[Obfuscation] at com.tirawireless.jumpdesktop.platform.core.ant.task.JumpletExecuteTask.execute(JumpletExecuteTask.java:276)
[Obfuscation] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[Obfuscation] at org.apache.tools.ant.Task.perform(Task.java:364)
[Obfuscation] at org.apache.tools.ant.Target.execute(Target.java:341)
[Obfuscation] at org.apache.tools.ant.Target.performTasks(Target.java:369)
[Obfuscation] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[Obfuscation] at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[Obfuscation] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[Obfuscation] at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
[Obfuscation] at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[Obfuscation] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
[Obfuscation] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)
[Obfuscation] cleanup executed
[Obfuscation] Jumplet: [Obfuscation], Execution FAILED: Obfuscator could not create a new JAR, Time: 1.34 seconds
BUILD FAILED
J:\Porting_WorkSpace\HelloWorld_jump_0\SonyEricsson J300\_default\RIM Blackberry 8310\ant\build.xml:315: com.tirawireless.jumpdesktop.platform.sdk.exceptions.JumpProcessException: Obfuscator could not create a new JAR
Total time: 18 seconds
Plz help me to fix this error.....
Thanks
MRajDear Rosrio:
I have found my default Report Server Name by
http://host:port/reports/rwservlet/getserverinfo
I replace the host name with my Machine Name from where I am executing the Web Application.
I have used following coding to invoke report on web
DECLARE
report_id Report_Object;
ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
repsvr varchar2(25) := 'rep_najam-abdali_ora10g';
BEGIN
report_id:= find_report_object('REPORT1');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'rpout1.html');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,'HTMLCSS');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,repsvr);
ReportServerJob:=run_report_object(report_id);
vjob_id := substr(reportserverjob,length(repsvr)+2);
vc_rep_status := REPORT_OBJECT_STATUS(ReportServerJob);
WHILE vc_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED', null)
LOOP
vc_rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
END LOOP;
IF vc_rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'|| vjob_id ||'?server='||repsvr,'_blank');
ELSE
message ('Report failed with error message '|| vc_rep_status);
END IF;
END;
I think it is very similar to your coding.
After invoking the report I found the following value appeared on the Left Top side of every report.
;background:#000000"
Does anybody have idea about it.
Best Regards,
Hassan -
Error while installing SAP Developer Workspace SR1 (MAXDB)
When I was trying to install SAP Developer Workspace SR1 (MAXDB), I encountered the following error in the Step of "Import Java Dump":
ERROR 2007-01-24 13:43:20
CJS-30049 Execution of JLoad tool 'C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MAXDB\install\sharedlib\launcher.jar" -showversion -Xmx512m com.sap.engine.offline.OfflineToolStart com.sap.inst.jload.Jload "C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/lib/iaik_jce.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/jload.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/antlr.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/exception.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/jddi.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/logging.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/offlineconfiguration.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/opensqlsta.jar;C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/install/sharedlib/tc_sec_secstorefs.jar;C:\sapdb\programs\runtime\jar\sapdbc.jar" -sec J2E,jdbc/pool/J2E,
PC144942389585/sapmnt/J2E/SYS/global/security/data/SecStore.properties,
PC144942389585/sapmnt/J2E/SYS/global/security/data/SecStore.key -dataDir "F:/NW04s SR1 Workplace/51031694_4/DVD_NW_2004s_SR1_Developer_Workplace\JAVA_EXPORT\JDMP" -job "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\DEVWP\MAXDB\IMPORT.XML" -log jload.log' aborts with return code 1.<br>SOLUTION: Check 'jload.log' and 'C:/Program Files/sapinst_instdir/NW04S/SYSTEM/DEVWP/MAXDB/jload.java.log' for more information.
ERROR 2007-01-24 13:43:21
FCO-00011 The step importJavaDump with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Jload|ind|ind|ind|ind|9|0|importJavaDump was executed with status ERROR .
I believe it is related to the MaxDB installation. But I can't figure out the reason that cause the errors.
Please advise me how I can complete the installation.
Thanks.
Kent
nullHI
If i remember correct , Installation will ask you for MaxDB user ids , it will give errors latter if you give lengthy user ids ( i think >8 or 9 ) . So try not to give lengty ids also check your host name. Looks like that also too long
Thanks
Prince -
Error while connecting 10g developer to 11 g database (windows7 64 bit)
pls help me.I have 11g database in my laptop and I installed oracle developer suit 10g ..everything seems normal but when I try to connect to database ,
I am getting tns error ora12154:TNS couldnt resolve the connect identifier..
I know this thing about listener or etc..I have never touched oracle for the last 4 years , I forgot so many thing..this listener file or tns seems to me weird..are they okey ?
by the way database itself has no problem , it works , remote or local it works.. but this dev suit thing ! I tried everything but it did not work. platform windows 7 ,
64 bit database name = ora.. I set oracle home directory and set oracle_sid=ora ..no way..I guess this is definitely about listener or tns ..
dev suit sqlnet.ora
# sqlnet.ora Network Configuration File: C:\oracle\devsuite10g\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT, ONAMES, HOSTNAME)
dev suit tnsnames.ora
# tnsnames.ora Network Configuration File: C:\oracle\devsuite10g\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ada-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
database listener.ora
# listener.ora Network Configuration File: C:\app\ada\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\ada\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\ada\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\ada\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\ada\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\app\ada\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\app\ada\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ada-PC)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = C:\app\ada
database sqlnet.ora
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
database tnsnames.ora
# tnsnames.ora Network Configuration File: C:\app\ada\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
pls help .it took may 12 hours ! still no solution..appreciated..
Edited by: user598947 on Dec 23, 2011 5:18 PM
Edited by: user598947 on Dec 23, 2011 5:26 PMora12154:TNS couldnt resolve the connect identifier..That's a "client" issue, that is, in Developer Suite home you don't have a connection string to the database (as it's shown in your DS tnsnames.ora). You have two choices :
- Use Net Configuration Assistant, from DS menu, to create the same in tnsnames.ora
- Use the Easy Connect Naming Method, which doesn't need tnsnames.ora. In this case, when connecting from Forms builder, as database you have to specify "<database hostname or IP address>/<database service name>", for example "ada-PC/orcl" (change orcl with yours). -
Error while runing standard SRS concurrent program
Hi all,
I had written the interface for po_vendor_sites_all.The data is loaded perfectly into interface table AP_SUPPLIER_SITES_INT.
Now while running standard interface program on SRS(Supplier Sites Open Interface Import) .it is giving following error .
Spawned Process 24209
REP-1419: 'beforereport': PL/SQL program aborted.
And it is not showing any reject code or status on back end on table AP_SUPPLIER_SITES_INT. And it is printing IMPORT_REQUEST_ID as request code in the table.now how many times i will run the SRS it is showing in the table AP_SUPPLIER_SITES_INT the MPORT_REQUEST_ID is not changing .
And Can any body suggest good document for writing interface program
Thanks in advance
Goutham
Message was edited by:
goutham konduruthe same situation i am also facing everything almost same .... but just i got diffirent error in request log that is
==========================
==========================
P_WHAT_TO_IMPORT='ALL'
P_COMMIT_SIZE='1000'
P_PRINT_EXCEPTIONS='Y'
P_DEBUG_SWITCH='Y'
P_TRACE_SWITCH='Y'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
LOG :
Report: d:\oracle\prodappl\ap\11.5.0\reports\US\APXSSIMP.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
MSG MSG-00001: After SRWINIT
MSG MSG-00002: After Get_Company_Name
MSG MSG-00003: After Get_NLS_Strings
ERR REP-1419: 'beforereport': PL/SQL program aborted.
is anyone got solution and can anybody get me out of this situation
thanks in advance
regards
anwer -
Error while using threads in proc program
Hi,
I am getting the error fetched column value NULL (-1405) in proc program while using the threads.
The execution of the program is as follows.
Tot_Threads = 5 (Total threads, totally 5 records with value instance names)
No_Of_threads = 1 (No Of threads executed at the same time)
Example :
INSTANCE_NAME Link1, link2, link3, link4, link5 (All different Databases)
NO_OF_THREADS - 5
Threading Logic:
Based on the maintanence NO_OF_THREADS, the program will process.
If (NO_OF_THREADS == 0)
Process_Sequence
else
if NO_OF_THREADS == TOT_THREADS
Process_Type1
else
Process_Type2
In a loop for all different instances,
New context area will be created and allocated.
New oracle session will be created.
New structure will be created and all global parameters are assigned to that structure.
For each instance, a new thread will be created (thr_create) and all the threads will call
the same(MainProcess) function which takes the structure as parameter.
At the end of every session, the corresponding oracle session will logged out.
Process_Type1 logic :
/* For Loop for all threads in a loop */
for(Cnt=0;Cnt < Tot_Threads;Cnt++)
/* Allocating new contect for every different thread */
EXEC SQL CONTEXT ALLOCATE :ctx[Cnt];
/* Connected to new oracle session */
logon(ctx[Cnt],ConnStr);
/* Assigning all the global parameters to the structure and then passing it to InsertBatching function */
DataSet[Cnt].THINDEX=Cnt;
DataSet[Cnt].sDebug=DebugMode;
strcpy(DataSet[Cnt].THNAME,(char *)InsNameArr[Cnt].arr);
DataSet[Cnt].ctx=ctx[Cnt];
/* creating new threads for time in a loop */
RetVal = thr_create(NULL,0,InsertBatching,&DataSet[Cnt],THR_BOUND,&threads[Cnt]);
sprintf(LocalStr1,"\nCreated thread %d", Cnt);
DebugMessage(mptr,LocalStr1,DebugMode);
for(Cnt=0;Cnt <Tot_Threads;Cnt++)
/* Waiting for threads to complete */
if (thr_join(threads[Cnt],NULL,NULL))
printf("\nError in thread Finish \n");
exit(-1);
/* Logout from the specific oracle session */
logoff(ctx[Cnt]);
/* Free the context area after usage */
EXEC SQL CONTEXT FREE :ctx[Cnt];
used functions:
thr_create with thr_suspend option
thr_join to wait for the thread to complete
Process_Type2 logic :
Here the idea is , if the load is heavy , then we can change the maintanence of NO_OF_THREADS (Ex - 2), so that only two threads will be executed in the same time , others should wait for the same to complete ,once the first two threads completed and the next two should be started and then in the same manner it will do for all the threads.
The parameters passing and the structure passing are same as above.
Here all threads will be created in suspended mode, and then only No_Of_threads(2) will
be started, others will be in suspended mode, once the first two is completed then the
other two thread will be started and in the same manner other threads.
used functions:
thr_create with thr_suspend option
thr_continue to start the suspended thread
thr_join to wait for the thread to complete
Process_Sequence logic :
Here the idea is , to run the program for all the instances , without creating the threads.Hence in the for loop , one by one instance will be taken and call the same function to Process. This will call the same function repeated for each different value. The parameters passing and the structure passing are same as above.
The InsertBatching function will prepare the cursor and pick all records for batching and then , it will call other individual functions for processing. For all the functions the structure variable will be passed as parameter which holds all the neccessary values.
Here in all the sub functions , we have used
EXEC SQL CONTEXT USE :Var;
Var is corresponding context allocated for that thread, which we assume that the corresponding context is used in all sub functions.
EXEC SQL INCLUDE SQLCA;
This statement we have given in InsertBatching Function not in all sub functiosn
Example for the Sub functions used in the program :-
/* File pointer fptr and dptr are general file pointers , to write the debub messages, DataStruct will hold all global parameters and also context area .
int Insert(FILE fptr,FILE dptr,DataStruct d1)
EXEC SQL BEGIN DECLARE SECTION;
VARCHAR InsertStmt[5000];
EXEC SQL END DECLARE SECTION;
char LocalStr[2000];
EXEC SQL CONTEXT USE :d1.ctx;
InsertStmt will hold insert statement
EXEC SQL EXECUTE IMMEDIATE :InsertStmt;
if (ERROR)
sprintf(LocalStr,"\nError in Inserting Table - %s",d1.THNAME);
DebugMessage(dptr,LocalStr,d1.sDebug);
sprintf(LocalStr,"\n %d - %s - %s",sqlca.sqlcode,ERROR_MESG,d1.THNAME);
DebugMessage(dptr,LocalStr,d1.sDebug);
return 1;
return 0;
I get this error occationally and not always. While preparing the sql statement also i am getting this error.
The code contains calls to some stored procedures also.
Thanks in advancein every select nvl is handled and this error is occuring while preparing statements also
-
Error while compiling xdk C sample program
hello,
the following error happens with xdk version 9.2.0.6 and oracle 9.2.0.4 installed on linux SUSE 9.1:
while compiling the xdk C sample program "SAXSample.c" in
$ORACLE_HOME/xdk/demo/c/parser, I got many "undefined reference" messages.
Here follows an excerpt of the first few lines of the error log:
oracle@cassius:/exp/oracle/xdk/demo/c/parser> make SAXSample
cc -o SAXSample -I ../../../../xdk/include SAXSample.c -L ../../../../lib -lxml9 -lxsd9 -lcore9 -lnls9 -lunls9 -lcore9 -lnls9 -lcore9 -lnls9 -lnsl -lm -lpthread
../../../../lib/libxml9.a(lpxerr.o)(.text+0x4d9): In function `LpxErrVPrintf':
: undefined reference to `__ctype_b'
../../../../lib/libxml9.a(lpxm.o)(.text+0x37dd): In function `LpxmA2L':
: undefined reference to `__ctype_b'
../../../../lib/libxml9.a(lpxm.o)(.text+0x38f9): In function `LpxmA2UL':
: undefined reference to `__ctype_b'
and so on.
Has anybody had this problem before? What's wrong with the libraries?
Thanks in advance.I don't see a specific Proc or precompiler forum around here.
Perhaps your best bet would be at [Call interface (OCI)|http://forums.oracle.com/forums/forum.jspa?forumID=67] forum or maybe [SQL and PL/SQL|http://forums.oracle.com/forums/forum.jspa?forumID=75] since it's more of a developers' forum. -
Getting run time errors while executing the copied SAP programs
Hi folks,
i want to copy an sap program.after coping i need to change some coding there.then i have to create a new transaction for that.
i am just copying the sap program RQEEAL10(transaction-QA32) to Z_RQEEAL10. it has 4 include programs.i am copying them to z programs like
RQ00MF10 copied to z_RQ00MF10
RQALVF14 copied to z_RQALVF14
RQALVF16 copied to z_RQALVF16
RQALVTOP copied to z_RQALVTOP.
now i am executing that program Z_RQEEAL10.but i am getting run time errors as given below.
<b>runtime error---</b>
The termination occurred in the ABAP program "Z_RQEEAL10" in
"SELECT_FIELDS_MANIP2_F16".
The main program was "Z_RQEEAL10 ".
The termination occurred in line 257 of the source code of the (Include)
program "RQALVF16"
of the source code of program "RQALVF16" (when calling the editor 2570).
--Error in ABAP statement when processing an internal table.
--When changing or deleting one or more lines of the internal table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
When the program terminated, the table had 2 lines.
these r the runtime errors what i am getting.where is the problem?i have activated all interface & includes.plz advice.
Thanks & regardsHi Madhu,
I will give you one more check point where you have to give your concentration while copying the standard programs....
Call Customer-Function (Function Exists) if any in the Program when copied will not get executed. Instead you need to call the FM Directly.
one more is also here
You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
~~Guduri -
Error while using LDB in HR Program
Hi,
While accessing ALV output in LDB program, when i press the back button, i am getting an error message as:
Personnel numbers skipped by the database driver.
Can someone explain the reason for it and how to rectify.
Thanks,
csPlease check If UR using GET PERNR event .. if so where
UR calling the FM to display ALV ..
it should be in the order ..
start-of-selection.
get pernr.
Populate internal table for ALV ...
end-of-selection.
call FM to display ALV ... -
Run time error while try to display challan after reconcillation.
All experts,
Here I m getting an runtime error...when I M going in t-code j1ifr....after reconcillation of recursive material bom po.
thankx in adv.Runtime Errors DYNPRO_FIELD_CONVERSION
Date and Time 07.05.2010 08:49:15
ShrtText
A conversion error occurred.
What happened?
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administe
termination messages, especially those beyond their normal deletion
date.
Error analysis
The program flow was interrupted and could not be resumed.
Program "SAPMJ1IFN" tried to display fields on screen 1210. However, an
error occurred while this data was being converted. -
Error while executing a Pro*c program
Hi,
guys iam trying to execute a Pro*c program, and iam getting the following error
ld.so.1: cms2sap1: fatal: libclntsh.so.8.0: open failed: No such file or directory
Killed
the same executable program was very much working till yesterday, iam on Sun Solaris, so what could be the problem???
cheere....yeah iam running under the same installation,
anyway i did set the LD_LIBRARY_PATH parameter to $ORACLE_HOME/lib and it did work, i just wonder as to why it became a problem all of a sudden, could someone have manipluated it??? if so how do i find it out???
cheere.......
Maybe you are looking for
-
How to discover which Conditions exist throughout a book?
I am new to FM and I inherited a bookfile with 50 component files. Each has 20 conditions available, but it *appears* that only about 5 are ever used. Is there a way to search or generate a report on which Conditions are in use in the book (so I can
-
TS2890 I have account but IPad can't accept it
I have account but IPad can't accept it,said it is not a test account and you must creat new one.
-
Do I need to keep my music on my HD?
Currently I keep all my music on my HD. But it's getting very tight for space. I have heard that burning them to DVD and then removing the songs from your HD, but not iTunes can cause problems. Is this true? or would I be better off playing safe and
-
or even for an earlier OS version such as Solaris 8, 9? from where Can I find certification matrix?
-
Skype has stopped working. BEX?
skype stops working and needs to close every time i start it but doesnt actually close and i have to end its task manually. it was working just fine till today now it gives me this. look at the dxdiag ive attached for pc specs Problem signature: Prob