Error while trying to debug on windows mobile 6.1  with j2me SDK 3.0 ea

Hi,
I tried to debug a simple application today. It works fine with the emulator but debug fails to connect to the device.
I followed the steps described in the userguide of 3.0.
host operating system: windows xp sp3
device: htc touch pro
device operatiing system: windows mobile 6.1 professional
The device is listed in the device selector of the SDK as Touch_Pro
The device is connected and active sync is running (i can explore the phone using windows explorer)
sun-java-cldc-emu.cab has been installed on the device and is running
When i try to debug the application from the SDK or netbeans 6.5(added 3.0ea as a platform) i get the following error:
Starting emulator with port number 51307
Cannot create device connection: Failed to connect to device 9!
Result: 1
I tried setting the loglevel to DEBUG in log4j config of the SDK, but thats it.
Are there any other settings i can change to get more detailed output?
Where do you report bugs/feedback for j2me SDK 3.0 ea?
regards,
dominikg
Edited by: dominikg on Dec 11, 2008 8:36 AM
-- changed topic title to 'error' instead of 'howto'
-- added more specific questions

Hi dominikg,
At first, You can try to restart the device-manager from system tray.
If it doesn't help, then try the following:
- stop the device manager
- Remove c:\Docement and Settings\<your User>\javame-sdk folder.
- Ran the device manager from <SDK>/bin directory
- try to debug again.
Did you tried to change port 51307 to another.
Early access build had some problems with device manager, I hope that final release will be better :)
BR,
Igor

Similar Messages

  • Error while starting MI Client on Windows Mobile 2005

    Hi Everybody,
    I have installed the MI Client on my PDA. While starting the MI Client (on clicking of MI\start_me.html file) a popup has comming with the message  "<b>The page cannot be displayed because the server could not be found or a DNS error occured."</b>. I have also checked "jscpout.txt" file, and has contain an error message as "Installation toolkit parameters /MI/tool.properties not detected".
    Here are the details of the softwares installed:
    OS           : Microsoft Windows Mobile Version 5.0 OS 5.1.1702
    Processor : ARM920T PXA27x
    CrEme      : CrEme327a_AX_CE50_PPC_minimal.cab
    MI Client   : MI2.5 SP17
    Can any body please suggest me how to resolve this error.

    Hi Siva Kumar,
    Thanks for reply, your solution worked for me.
    Now I am getting a runtime error when I clicked on the deployed application link
    I have posted the error description with the subject
    <b>JSPerror : Invalid class file format (running with MI SP17)</b>
    Please reply this thread too.
    Regards,
    Murthy

  • Error while trying to activate R/3 datasource from BI with T-Code rsa5

    hi all,
    i want to activate a particular datasource in R/3 through BI.iam following the below steps.
    RSA1-->source system>select source system>right click>connection parameters>remote logon>rsa5-select datasource.
    when iam trying to activate from rsa5 its giving error like "No valid application component hierarchy exists".when iam trying continue in next window its showing a tree "NONODESCONNECTED" and iam unable to see tree "SAP".
    actually am i following the right procedure, if not guide me. please guide me how to solve this issue.
    thanx&regards
    Vamshi D Krishna

    Hi Vamshi,
                    Just carry on with your dats source. Ignore warning messages.
    hope this will help you......
    Thanks,
    Vijay.
    Edited by: vijay m on Jun 8, 2009 6:45 PM

  • Visual Studio Error while trying to debug a web application

    I am developing a MVC web application.  I had an issue where VS 2013 sp3 ultimate was not launching anymore so I uninstalled and re-installed VS 2013 sp4 ultimate.  I am able to launch my web application using Start Without Debugging.
    However, when I try to debug my application I get a Microsoft Visual Studio pop-up error message that says:
    'Uncaught exception thrown by method called through Reflection. It's not even reaching my application I am unable to even debug where this message is coming from.
    Does anyone have any ideas?
    Help will be very much appreciated.
    Thanks.
    E Rivera

    Hi E Rivera,
    Thanks for your friendly response.
    If you debug this app in other VS machine, how about the result?
    In addition, whether all MVC projects have the same issue? For example, just create a simple default MVC project, debug it, how about the result?
    If all projects have the same issue, I doubt that it is your VS installion issue.
    Maybe you could repair your VS, and then create a new project, debug it again.
    If just one specfic app has this issue, I doubt that we would think about the project, you could add breakpoints, and then debug your app, and maybe you could get more useful information. Of couse, if just the specifc MVC app has this
    issue, I suggest you post this issue to the ASP.net forum.
    http://forums.asp.net
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error while trying to integrate Jdev 10.1.3.3 with OER 11.1.1.2.0

    Trying to submit a wsdl file from Jdev 10.1.3.3 into OER 11.1.1.2.0 and getting com.oracle.oer.sync.framework.MetadataIntrospectionException in this process. Configured Jdev as per section "7.1.3 Integrating with Oracle JDeveloper 10g" in Oracle Integration guide for OER. But still not able to submit artifacts into OER 11g from Jdev 10g. Any help on this will be welcome.
    Pls find the error message below -
    introspect-file:
    [repository.submit] An error occurred performing the Repository operation:
    [repository.submit] com.oracle.oer.sync.framework.MetadataIntrospectionException: java.lang.Exception: The Harvester Plugin Directory C:\Documents%20and%20Settings\463340\My%20Documents\Softwares\jdevstudiofull10133\jdevstudio10133\harvester\plugins doesn't exist.
    BUILD FAILED
    C:\Documents and Settings\463340\My Documents\Softwares\jdevstudiofull10133\jdevstudio10133\harvester\harvester-ant.xml:60: com.oracle.oer.sync.framework.MetadataIntrospectionException: java.lang.Exception: The Harvester Plugin Directory C:\Documents%20and%20Settings\463340\My%20Documents\Softwares\jdevstudiofull10133\jdevstudio10133\harvester\plugins doesn't exist.

    This was due to spaces in the harvester's path "C:\Documents%20and%20Settings\463340\My%20Documents\Softwares\jdevstudiofull10133\jdevstudio10133\harvester\plugins"
    Once I put the harvester inside a non-space folder(i.e C:\Temp) it worked.
    Jdeveloper cannot handle space.

  • Error while trying to use the DNS/DHCP record sync with IPAM script

    Could somebody help me to resolve the below error.
    I get this error message , when i try to do a Invode-ipamdhcplease
    ===========================================
    Invoke-IpamDhcpLease : [] Connecting to remote server failed with the following error message :
    The WS-Management service cannot process the request. Cannot find the Microsoft.ipam session configuration in the
    WSMan: drive on the  computer. For more information, see the about_Remote_Troubleshooting Help topic.
    At line:1 char:1
    + 
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [Invoke-IpamDhcpLease], PS
       RemotingTransportException
        + FullyQualifiedErrorId : InvalidResourceUri,PSSessionOpenFailed

    Try the following:
    Reason for issue:
        Possibly the Microsoft.ipam ps session configuration is missing from the ipam server.
    Resolution:
         Log into the ipam server
    Launch a powershell window with administrator privileges
    Execute the following commands:
    New-PSSessionConfigurationFile -Path ./ipam.pssc
    Register-PSSessionConfiguration -Name Microsoft.ipam -Path .\ipam.pssc
    Set-PSSessionConfiguration -name Microsoft.ipam –ShowSecurityDescriptorUI
    Add the following groups from the local machine scope:
            IPAM Administrators
            IPAM ASM Administrators
            Make sure they have full control privileges.
    Get-PSSessionConfiguration *ipam
            Now you should be able to see the Microsoft.ipam ps session configuration
    If the following command succeeds then the error should no longer occur
    $testSession = New-PSSession -computerName <ipamFQDN> -configurationName Microsoft.ipam.

  • Error while trying to visualize the results from algorithms (connect with Rserver)

    Hello all, I'm trying to execute Apriori to create a relation purchase between products.
    I execute the algorithm and it work perfectly, but when I change the view to change the results, it appears the following error:
    Does anyone knows what might be happening?
    Regards

    Hi Jugren,
    Good to know you were finally able to run the algorithm .
    Regarding the error that you are getting, I too got a similar one and I followed the steps below.
    You need to maintain some parameters in the file indexserver.ini and xsengine.ini if using XSJS
    Maintain the below parameters:
    cer_timeout default is 300 seconds. Increase it to some 3000 secs.  This parameter is particular important, since it defines the maximal run time allowed for a single R function execution.
    cer_rserve_addresses Has to be set as follows "host1:port1" where host and port are the places where your R-Serve is installed
         ○ 
    cer_rserve_maxsendsize: maximum size of a result transferred from R to SAP HANA (in Kbytes). Make sure its 0 (no limit)
    It should work for you as well.

  • BootCamp Assistant 4.0.1 and errors while trying to download Windows support software

    I am using BootCamp Assistant 4.0.1 and I keep getting errors while trying to download the Windows support software.  I keep getting errors that says the software is not on the server or that there was just an error saving and it stops.  Any help please!!  I am using a MacBook pro with the new Lion OS

    I finally got it to work correctly.  I re-formatted the external hard drive and everything worked fine.

  • Error: While starting a Debuger session

    Hi,
    I am gettting the following Error while trying to Debug a mapping.
    VLD-1111: This mapping cannot be generated because it contains a combination or sequence of operators that are invalid.
    The mappping I am using is completly valid (It consists of two source tables a Joiner and a target flat File ) and it runs fine.
    Any help on the same will be greatly appreciated.
    Ciao
    Anish

    Hi,
    Did u generate the mapping and see whether it is generating the code properly?Also check whether ur mapping is validating properly..
    The following link may provide u with some information.
    VLD-1111 Unknown step type
    PS: The de-bug in OWB is not very effective and i suggest u generate the intermediate code to find what the error is rather than going for de-bug.
    Regards
    Bharath

  • Error while trying to install SAP CE 7.1 EHP 1 on Windows 7

    I am trying to install SAP CE 7.1 EHP 1 on Windows 7.  I am getting below error while trying to install. can you please help to fix this problem?
    Running msiexec failed with return code 1603: undefined
    Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
    If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
    Thanks,
    Sridhar.

    I donu2019t think so it is windows 7 or 64/32 bit hardware/software issue. I have faced u201Cmsiexec failed with return code 1603u201D error many times during SAP installation and solved this issue with below mentioned procedure.
    Solution:
    Just change the location of temp directory to empty folder in user environment variable without cancel installation in current user session. After that, click on yes button to continue the installation. If installation will ended after click on yes button, restart the installation with continue old installation option.
    Regards.
    Yasir

  • When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

    When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Go to "control panel" then "add or remove programs".  Highlight "Apple software update"  Choose "change" click "Repair"  This should do the trick.  Then download and install iTunes 10.5 again.

  • Receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

    receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

    There isn't much here which is actionable.  Please review your installation logs by following the steps listed at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • An error occurred while trying to start the Windows Deployment Services server

    After rebooting the server, I cannot start the Windows Deployment Services anymore.
    It worked perfectly before the reboot. When starting it manually these errors appear in the event log:
    The Windows Deployment Services Server service terminated with service-specific error 1460 (0x5B4).
    An error occurred while trying to initialize multicast manager. Windows Deployment Services server will be shutdown.
    Error Information: 0x5B4
    An error occurred while trying to start the Windows Deployment Services server.
    Error Information: 0x5B4
    This is on server standard beta 3.

    I have removed the server from the WDS, then I have uninstalled the role, rebooted, reinstalled the role.
    When I started the WDS the server was back in there, but when I wanted to start the service I got the message "the windows deployment services configuration is corrupt". I have triggered these commands to reset this:
    Code Snippet
    wdsutil /Verbose /Progress /Uninitialize-Server
    Windows Deployment Services Management Utility [Version 6.0.6001.16510]
    Copyright (C) Microsoft Corporation. All rights reserved.
    Tearing down server...
    == Original server operational mode: Native ==
    -> Resetting setup state
    -> Disabling and resetting Windows Deployment Services services
    -> Removing server BINL SCP
    -> Removing Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST
    == Final server operational mode: Not Configured ==
    The command completed successfully.
    Then i did this command, but again it failed to start at the end.
    Code Snippet
    C:\Windows\system32>wdsutil /Verbose /Progress /Initialize-Server /REMINST:"c:\R
    emoteInstall"
    Windows Deployment Services Management Utility [Version 6.0.6001.16510]
    Copyright (C) Microsoft Corporation. All rights reserved.
    Setting up server...
    -> Creating Windows Deployment Services installation tree
    ---> Creating Windows Deployment Services installation root at \\LH-AJGG6OZWH9Z4
    .longhorn.office\c$\RemoteInstall
    ---> Creating Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.of
    fice\REMINST
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\x86\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\ia64\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\x64\Images
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Boot\Fonts
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Tmp
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Mgmt
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\WdsClientUnattend
    ---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
    ce\REMINST\Templates
    -> Installing Windows Deployment Services files
    ---> Installing system files
    ---> Installing boot files for x86
    ---> Installing boot files for ia64
    ---> Installing boot files for x64
    -> Updating registry
    -> Configuring the TFTPD service
    -> Configuring BINL SCP
    Enabling Windows Deployment Services services...
    Starting Windows Deployment Services services...
    An error occurred while trying to execute the command.
    Error Code: 0x41D
    Error Description: The service did not respond to the start or control request in a timely fashion.
    Anyone have an idea what could be the cause? I found this additional error in the event log, but distributed file system hasn't been installed since the beginning.
    DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root REMINST.

  • I am unable to connect to the icloud from my windows laptop and get an error message: "Connection error: icloud encountered an error while trying to connect to the server"

    I am unable to connect to icloud from my windows-based laptop and get the following error message: "icloud encountered an error while trying to connect to the server."

    I would remove the email account from mail and then set it up again.
    If your are able to long I via owa though without the auto fill, then we already know the user name and password are correct.
    Let me know if that works.

Maybe you are looking for