Error while uploading HR master data from inQuality server

Hi, Expert. While uploading of MAster data from Developement to Quality by BDC. When program starts for Tcode PA40, selecting Hiring Action, it is goining to the Action Screen. Here while taking the position from HR template, it gives error as Position is not in Table T428B. Payroll area on the date (Date of original hiring, of the person) it is taking DM as defalt in place of our created Area and terminating. When i am trying entering the data manually, it is giving same error for Position. I am not able to upload the data. Kindly help me by suggesting me the correct sequence and steps for uploading the data. Correct answer will be provided with STARSSSSSS **. Regds Punit.

Have all your configurations been transported to Quality?
Have you created the positions before initiating BDC for Hiring?
Check Feature ABKRS in Quality. Is this same as in Development?
Is your BDC running OK in Development?
Regards,

Similar Messages

Error While Uploading GL Master Data in LSMW

Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI Consultant

Hi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh

Getting error while uploading gl master data using LSMW batch input data

Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik

Error while replicating vendor master data from R3 to SRM

Hi,
I am trying to replicate Vendor master data from the R3 system to SRM system(7.0) for the first time and am facing the following error :
Organizational unit 50000004 does not exist; check entries
Message no. BBP_BUPA034
I have gone through the other posts with similar issues but haven't been able to find a solution.
Any ideas?
Thank you.

hi sahlini
did you create a vendor organisation structure via PPOCV_BBP ? SINCE YOU REFER THIS NUMBER 50000004 WHAT IS THIS?
BR
\MUTHU

Error while replicating customer master data from R/3 to CRM

Hi gurus,
I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows "Incorrect parameter with CALL FUNCTION"
Kindly help regarding it.
regards,
vimal

Hello Vimal,
Please refer 552435 and see if this helps.
Please reward points.
regards,
Muralidhar Prasad.c

Error While Loading the Master Data from R3

Hi Gurus,
I am loading the masterdata from R3.I have enhanced the Datasource .In that datasource there is a field DATUB ( Valid To Date).For this field I have wriiten the User Exit at the R3 side.Now I am loading the data in BW.But I am not getting the values for DATUB field in the BW, though they are there at the R3 side.
I have done following to analyse the issue.
1.Have checked the datasource at the R3 from RSA3.Its populating the field DATUB correctly.
2.Have deleted the whole masterdata and tried to load again.But no success.
3.Have tried to load the data for the perticular Bill of Material(BOM).Then it get loaded correctly along with the value of DATUB.But when i tried loading the entire data i am not getting the field DATUB populated.
Please help me out.Its urgent.
Thanks.
Shalaka

Hello,
I finally got the solution to my problem.
If you append a field to generic datsource then you should check the tick in datasource for "field only". Or else you would not get the values handed over to BW.
Please check following link for more details about this "field only" setting for Generic datasources.
http://help.sap.com/saphelp_tm70/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
Regards,
Anuj

TNS-12518 error while trying to fetch data from SQL Server

Hi everyone,
I'm trying to establish connectivity from Oracle 10.2 server to a SQL Server 2005. These are the server details
DOVER - This is where I installed Oracle Gateway for SQL Server. There's already an Oracle home in this server and I have used the existing listener for the incoming connections
LUNDY - This is where my actual Oracle server resides
HEBRIDES - This is where SQL Server 2005 instance resides, the database name is TRACKIT90
I've set everything as explained in Oracle documentation http://download.oracle.com/docs/cd/B19306_01/gateways.102/b14270/ch2.htm#i1005694 but in the end I'm getting an TNS-12518: TNS:listener could not hand off client connection when I run a test query and this is what it says in the listener.log of DOVER
01-MAR-2010 15:33:19 * (CONNECT_DATA=(SERVICE_NAME=tg4msql)(HS=OK)(CID=(PROGRAM=w:\oracle\product\10.2.0\db_1\bin\ORACLE.EXE)(HOST=LUNDY)(USER=))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.0.0.58)(PORT=3887)) * establish * tg4msql * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
My initialization parameter under \\ORACLE_HOME\tg4msql\admin of gateway installation in DOVER is as below:
HS_FDS_CONNECT_INFO=hebrides.TRACKIT90
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
The listener.ora of the active listener in DOVER has the following lines, by the way this listener does not reside on the same ORACLE_HOME as the gateway's ORACLE_HOME but it is the current active listener in the server. The listener has also been stopped and started:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dover)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_LISTENER =
(SID_DESC =
(SID_NAME = tg4msql)
(ORACLE_HOME = E:\oracle\product\10.2.0\tg_1)
(PROGRAM = tg4msql)
The following entry has been added to the tnsnames.ora in LUNDY server where my actual Oracle database resides.
TRACKIT_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = DOVER)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = tg4msql)
(HS = OK)
And finally a database link is created by using the below DDL statement:
CREATE DATABASE LINK "DLINK" CONNECT TO "username" IDENTIFIED BY "password" USING 'TRACKIT_DATA';
When I do a select statement on one of the tables of TRACKIT database by using the following query I got the TNS-12518 error with above details
select * from announcement@dlink;
I would appreciate any help and also please let me know if I missed out any details.
Thanks.

This is the output comes with the "lsnrctl service listener" command on DOVER server
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 02-MAR-2010 11:48:55
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "STD81" has 1 instance(s).
Instance "STD81", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:5 refused:0
LOCAL SERVER
Service "STD81" has 1 instance(s).
Instance "std81", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:4234 refused:0 state:ready
LOCAL SERVER
Service "STD81_XPT" has 1 instance(s).
Instance "std81", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:4234 refused:0 state:ready
LOCAL SERVER
Service "tg4msql" has 1 instance(s).
Instance "tg4msql", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:22
LOCAL SERVER
The command completed successfully

How to upload the master data from legacy to SAP

Hi Frends,
how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
please clarify me
Regards
Sap Guru

Hi ,
use LSMW or BDC for uploading Master & transaction data.
This work is done by the Respective Functional team.
Chandra

Upload vendor master data from legacy system to internal table tcode xk01

through batch input program how to upload vendor master data from legacy system to internal table and then to SAP R/3 database(transaction XK01) by using recording method.

By learning the basics of BDC recording and the use of GUI_UPLOAD

Error while loading Reported Financial Data from Data Stream

Hi Guys,
I'm facing the following error while loading Reported Financial Data from Data Stream:
Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
The message appears in Target Data. Item is not filled in almost 50% of the target data records and the error message appears.
Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown. When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data. Item is not filled up, hence causing the error.
For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign. When it is posted as negative / Credit in the source data, it is not properly written to the target.
Should I need to define any breakdown category for these items? I think there's something wrong with the Item definitions OR I'm missing something....
I would highly appreciate your quick assistance in this.
Kind regards,
Amir

Found the answer with OSS Note: 642591.....
Thanks

Transport Master Data from one server to another server

How can I transport the master data from one server to another server?
Client copy will not be possible.
Regards,
Subhasish

Hi,
Look at the below link, you will understand
http://help.sap.com/saphelp_45b/helpdata/en/cc/f22c7dd435d1118b3f0060b03ca329/content.htm
Regards
Sudheer

Is it possible to move the master data from one server to onther server?

is it possible to move the master data from one server to onther server?

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Server error: "The attempt to read data from the server '(null)' failed"

Multiple times during each day my client (Mail.app) puts up a little exclamation mark "!" next to the mail account hosted on our Leopard Server. Clicking on this little alert icon pops up a message that reads:
+There may be a problem with the mail server or network. Verify the settings for account “Leopard Server Account” or try again.+
+The server returned the error: The attempt to read data from the server “(null)” failed.+
I can make the "!" go away by choosing Mailbox>Synchronize>Leopard Server Account. And everything seems peachy but it inevitably pops up again in another hour or two. It's annoying because I'm not sure if mail is getting through or not when the "!" is up.
Any ideas why this is happening?

MY SOLUTION REPOSTED FROM ANOTHER THREAD:
I've just solved a similar issue.
I have a dedicated server running Plesk 9.5 and when I upgraded to iLife 11 and Snow Leopard this error appeared. I could quickly click "get mail" and I'd get all my mail, but only 3-4 of my 9 mail accounts would connect. Theo others would have the error:
"The server error encountered was: The attempt to read data from the server..."
I found solutions for those using IMAP mail:
modify the /etc/courier-imap/imapd configuration file and change MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40. This allows all the machines behind my home firewall to connect to multiple accounts on the e-mail server with mailbox caching enabled.
I'd made this change on my server but it didn't seem to have any effect. It dawned on me that I'm using POP, not IMAP. So I found in /etc/courier-imap/pop3d the same settings. I changed the MAXDAEMONS from 40 to 80 and MAXPERIP from 4 to 40 and voila, all my connections concurrently worked.
This has taken me more than two days to fix and I hope posting this helps someone else with the same issue.

Master Data from Dev Server to Qty Server

Hi Friends
How we are sending Master Data from Dev Server to Qty Server?
I created a Business Partner in Dev Server now I want move to Qty Server so how can send that Business Partner?
Plz give me the solution with Example plz
Regards
Mahesh Kumar
My mail id is [email protected]

Hello Mahesh,
you CAN NOT transfer master date from DEV to QTY. You have to create the Business Partner again.
Regards
Gregor

Error while loading customer master data through Idoc (DEBMAS) from BODS

Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan G

Hi, did you referred this link : Error during customer master mass update through XD99

Error while uploading HR master data from inQuality server

Similar Messages

Maybe you are looking for