Error while using Ago function

hi all,
OBI 11.1.1.7.1
I am unable to view data on result tab. No value returned in Calcutated Attribute. Please Help
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 22040] To use Ago function, the storage level of the query ('[Time Dim.PAY_DT]') must be a static level.Please have your System Administrator look at the log for more details on this error. (HY000)
Regards,
Nivedita

Substr("Fin Account".ASSET_NUM, 1, instr(Fin Account".ASSET_NUM, ':')+1)
or
Substr("Fin Account".ASSET_NUM, instr(Fin Account".ASSET_NUM, ':')+1,50)
i think you should use 3 parameters, did you try that if it would work?
additionally check what is the default format of your data: go to column properties -> data format; if its text then ok; otherwise you will have to cast the number to char; in such a case the above could be:
Substr(cast("Fin Account".ASSET_NUM as char(20)), 1, instr(cast(Fin Account".ASSET_NUM as char(20)), ':')+1)
or
Substr(cast("Fin Account".ASSET_NUM as char(20)), instr(cast(Fin Account".ASSET_NUM as char(20)), ':')+1,50)
Edited by: UserMB on Jun 25, 2009 6:17 AM

Similar Messages

ORA-00902: invalid datatype comile error while using CAST function

Hi everyone,
I'm getting ORA-00902: invalid datatype compilation error while using CAST function.
open ref_cursor_list for select empName from TABLE(CAST(part_t AS partnumberlist));
The partnumberlist and ref_cursor_list is declared in the Package spec as given below.
TYPE ref_cursor_list IS REF CURSOR;
TYPE partnumberlist IS TABLE OF emp.empName%TYPE;
The error points the partnumberlist as invalid datatype in TOAD because of this i'm unable to compile the package.
Any suggestion
Thanks and regards
Sathish Gopal

Here is my code for
package Spec
CREATE OR REPLACE PACKAGE "HISTORICAL_COMMENTZ" AS
TYPE prior_part_data_record IS RECORD (
prior_part_row_id PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE,
prior_pgm_chng_s_id PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE
TYPE parts_list IS TABLE OF prior_part_data_record;
--TYPE parts_list IS TABLE OF NUMBER;
TYPE partnumberlist IS TABLE OF PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE;
TYPE partnumber_cursor IS REF CURSOR;
TYPE comment_record IS RECORD (
pgm_s_id                     PGM_PART_CMNT.PGM_S_ID%TYPE,
part_row_s_id                PGM_PART_CMNT.PART_ROW_S_ID%TYPE,
pgm_chng_s_id                PGM_PART_CMNT.PGM_CHNG_S_ID%TYPE,
cmnt_txt                     PGM_PART_CMNT.CMNT_TXT%TYPE,
cmnt_dt                     PGM_PART_CMNT.CMNT_DT%TYPE,
updt_rsrc_id                PGM_PART_CMNT.UPDT_RSRC_ID%TYPE
TYPE comment_list IS TABLE OF comment_record;
global_pgm_s_id INTEGER := 0;
global_part_row_s_id INTEGER := 0;
err_num NUMBER := 999999;
err_msg VARCHAR2 (250);
PROCEDURE getComments (
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist out partnumber_cursor);
END;
Package Body
CREATE OR REPLACE PACKAGE BODY HISTORICAL_COMMENTZ
AS
FUNCTION getPriorPart
(param_prior_pgm_chng_s_id IN PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE,
return_prior_part_data_record IN OUT prior_part_data_record
RETURN INTEGER
IS
retVal INTEGER;
prior_part_row_id INTEGER;
prior_pgm_chng_s_id INTEGER;
local_prior_part_data_record prior_part_data_record;
BEGIN
SELECT PR_PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_prior_part_data_record
--SELECT PR_PART_ROW_S_ID INTO retVal
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND CUR_PGM_CHNG_S_ID = param_prior_pgm_chng_s_id;
return_prior_part_data_record := local_prior_part_data_record;
retVal := 0;
RETURN retVal;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
END getPriorPart;
FUNCTION getComment (found_parts_list IN parts_list, comments OUT comment_list)
RETURN INTEGER
IS
CURSOR init_cursor
IS
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
FROM PGM_PART_CMNT WHERE 1 = 2;
retVal INTEGER;
indexNum PLS_INTEGER;
local_part_record prior_part_data_record;
local_comment_record comment_record;
local_part_row_s_id NUMBER;
i PLS_INTEGER;
BEGIN
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO comments;
i := 0;
indexNum := found_parts_list.FIRST;
WHILE indexNum IS NOT NULL
LOOP
local_part_record := found_parts_list(indexnum);
local_part_row_s_id := local_part_record.prior_part_row_id;
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
INTO local_comment_record FROM PGM_PART_CMNT
WHERE PGM_S_ID = global_pgm_s_id
AND PART_ROW_S_ID = local_part_row_s_id;
comments(i) := local_comment_record;
i := i + 1;
END LOOP;
RETURN retval;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
END getComment;
PROCEDURE getComments
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist OUT partnumber_cursor)
IS
comment_recordlist comment_record;
retPartnumberlist partnumberlist;
found_parts_list parts_list;
local_part_record prior_part_data_record;
is_more_parts BOOLEAN;
driver_chng_s_id NUMBER;
num_parts NUMBER;
retVal NUMBER;
comments comment_list;
returnPartnumberlist partnumberlist;
iloopCounter PLS_INTEGER;
inx1 PLS_INTEGER;
part_t partnumberlist :=partnumberlist(100,200,300);
CURSOR part_list_init_cursor
IS
SELECT PR_PART_ROW_S_ID,PR_PGM_CHNG_S_ID FROM PGM_RPLCMNT_PART WHERE 1 = 2;
CURSOR inIt_cursor
IS
SELECT 0 FROM DUAL WHERE 1 = 2;
BEGIN
DBMS_OUTPUT.ENABLE (5000000);
global_pgm_s_id := pgm_s_id;
global_part_row_s_id := part_row_s_id;
SELECT PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_part_record
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id AND
CUR_PGM_CHNG_S_ID IN (SELECT MAX(CUR_PGM_CHNG_S_ID) FROM PGM_RPLCMNT_PART WHERE
PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id
GROUP BY PART_ROW_S_ID);
OPEN part_list_init_cursor;
FETCH part_list_init_cursor
BULK COLLECT INTO found_parts_list;
-- Add the existing part to the found list
found_parts_list.EXTEND;
found_parts_list(1) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
num_parts := 1;
is_more_parts := TRUE;
WHILE (is_more_parts) LOOP
retVal := getPriorPart(driver_chng_s_id,local_part_record);
IF (retVal != -1) THEN
found_parts_list.EXTEND;
num_parts := num_parts + 1;
found_parts_list(num_parts) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
ELSE
is_more_parts := FALSE;
END IF;
END LOOP;
--num_parts := getComment(found_parts_list,comments);
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO returnPartnumberlist;
num_parts := found_parts_list.COUNT;
FOR iloopCounter IN 1 .. num_parts
LOOP
returnPartnumberlist.EXTEND;
returnPartnumberlist(iloopCounter) := found_parts_list(iloopCounter).prior_part_row_id;
END LOOP;
retPartnumberlist := returnPartnumberlist;
open
*          partnumber_cursorlist for select PR_PART_ROW_S_ID from TABLE(CAST(retPartnumberlist AS historical_commentz.partnumberlist));*
DBMS_OUTPUT.put_line('Done....!');
EXCEPTION
some code..............................
END getComments;
END HISTORICAL_COMMENTZ;
/

Error while using the function module..pack_handling_unit_dlvry

Hi all...
while using the function module pack_handling_unit_dlvry,
we need to pass the handling unit number as per the functionality we require.
but the mandatory field for the function module is the handling unit number in the form of bar code..
so how to use this function module..
All the useful answers will be regarded..
Regards,
Saroja.

Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.

Error while using substring function

Hi,
I am getting the below error while using this query.
Substr("Fin Account".ASSET_NUM, instr(Fin Account".ASSET_NUM, ':')+1)
(nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <(>: Syntax error [nQSError: 26012] . (HY000)
Please help me..
Edited by: user10441472 on Jun 24, 2009 12:49 PM

Substr("Fin Account".ASSET_NUM, 1, instr(Fin Account".ASSET_NUM, ':')+1)
or
Substr("Fin Account".ASSET_NUM, instr(Fin Account".ASSET_NUM, ':')+1,50)
i think you should use 3 parameters, did you try that if it would work?
additionally check what is the default format of your data: go to column properties -> data format; if its text then ok; otherwise you will have to cast the number to char; in such a case the above could be:
Substr(cast("Fin Account".ASSET_NUM as char(20)), 1, instr(cast(Fin Account".ASSET_NUM as char(20)), ':')+1)
or
Substr(cast("Fin Account".ASSET_NUM as char(20)), instr(cast(Fin Account".ASSET_NUM as char(20)), ':')+1,50)
Edited by: UserMB on Jun 25, 2009 6:17 AM

Error While using ToDate Function

Hi All,
I am getting below error while creating one report in OBIEE. Please help me in this regard as this is bugging me from long time.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
<<Picture (Metafile)>> Error Details <javascript:void(null)>
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 435222656. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058]
A general error has occurred. [nQSError: 22047] The Dimension used in TODATE
function must be referenced in the query. (HY000)
Kindly help me resolve this issue.
Thank you,
Yugendra.

HI User,
Refer this link
http://siebel.ittoolbox.com/groups/technical-functional/siebel-analytics-l/nqserror-22047-the-dimension-used-in-ago-function-must-be-referenced-in-the-query-2692576

Error while using row_num function in forms6i

Oracle forms6i
Hai
While using row num function in my forms i had a error.
My coding is
declare
pin_no varchar2(16);
pin_date date;
pin_time varchar2(25);
mstr varchar2(200);
m_file TEXT_IO.FILE_TYPE;
m_file_path varchar2(100) := :global.filename;
line_count number;
M_BARCODE VARCHAR2(16);
M_BARDATE DATE;
M_BARTIME varchar2(25);
M_No number;
Cursor c1 is
select barcode,bardate,bartime,
row_number() over (partition barcode order by bartime) as RN-------------------the error at this line
from temp_attendance
group by barcode,bardate,bartime
order by bardate;
begin
If m_file_path is not null then
m_file:= TEXT_IO.fopen(m_file_path, 'r');
--DELETE FROM temp_attendance;
Loop
begin
TEXT_IO.get_line(m_file,mstr);
mstr := ltrim(rtrim(mstr));
M_barcode :=substr(mstr,1,16);
M_bardate := to_date(substr(mstr,17,8),'DD/MM/YYYY');
M_bartime := (substr(mstr,25,4));
INSERT INTO temp_attendance(BARCODE,BARDATE,BARTIME,RN) VALUES(M_BARCODE,M_BARDATE,M_BARTIME,M_No);
Exception
when no_data_found then
text_io.fclose(m_file);
exit;
End;
End loop;
go_block('TEST_MS1');
clear_block(no_validate);
For r1 in c1 loop
     :barcode := r1.barcode;
     :bardate := r1.bardate;
     :bartime := r1.bartime;
     next_Record;
end loop;
first_record;
end if;
exception
when others then
forms_ddl('ROLLBACK');
message (sqlerrm);
end;
Thanks & Regards
Srikkanth.M

Hi,
Try using:
row_number() over (partition BY barcode order by bartime) as RN
If that wasn't the problem, what is the error you are getting?
Regards.

Error while using group function

Oracle forms6i
Hai
While i am compile my coding it compile successfully, but when i tried to executes i shows error in group function
my coding is
if (cnt<>0 ) then
select BARCODE,INTIME,OUTTIME into today_bar,today_in,today_out from dail_att where BARCODE= :Barcode
and ATTEND_DATE = :bardate;
update dail_att set outtime = max(:bartime) where barcode= :barcode
and ATTEND_DATE = :bardate;
else
if (cnt2<>0 ) then
select INTIME,OUTTIME into yest_in,yest_out from dail_att where BARCODE= :Barcode
and ATTEND_DATE = :bardate-1;
if(yest_in is not null and yest_out is null) then
update dail_att set outtime =max(:bartime) where barcode= :barcode
and ATTEND_DATE = :bardate-1;
else
insert into dail_att(barcode,intime,attend_date)
values(:barcode,min(:bartime),:bardate);
end if;
else
if :bartime between 0100 and 0630 then
insert into dail_att(barcode,intime,attend_date)
values(:barcode,min(:bartime),:bardate-1);
update dail_att set outtime = max(:bartime) where barcode= :barcode
and ATTEND_DATE = :bardate-1;
else
insert into dail_att(barcode,intime,attend_date)
values(:barcode,:min(bartime),:bardate);
end if;
end if;
end if;
while i am trying to this groupfunction it throws error while i use having tell me how to use group function and where
to use
Regadrs
Srikkanth.M

Hai sir
I had a table that contain fields
EMPCODE NUMBER
EMPNAME VARCHAR2(25)
BARCODE VARCHAR2(25)
INTIME VARCHAR2(25)
OUTTIME VARCHAR2(25)
INTRTIMEIN VARCHAR2(25)
INTROUTTIME VARCHAR2(25)
PERTIMEIN VARCHAR2(25);
PERTIMEOUT VARCHAR2(25);
ATTEND_DATE DATE ;
Consider that a table with 6 fields ie timein,intrtimein,pertimein,pertimeout,intrtimeout,timeout
I have generating a attendance table and a table contain 6 various times for an employees and we need to arrange it in order
0815,0816,1230,1250,1645,1646
If 0815 is the starting time then timein ie mintime
0816 stored to be in intrtime
then1250 then it stored in pertimein
then 1230 then it stored in pertimeout
then 1645 stored in intrtimeout
then 1646 stored in timeout
I tried with max and min function but its not working properly pls tell me some solutions
Thanks & Regards
Srikkanth.M

Error while using Evaluate function

Hi ,
I am using the following expression in the criteria tab in order to get first value for every customer order by date:
EVALUATE('FIRST_VALUE(%1) OVER (PARTITION BY %2 ORDER BY %3)' AS INTEGER, "Fact - Customer SubLedger"."TRANSACTION AMOUNT",Customer.CUST_ACCOUNT_NUMBER,"GL Date".DAY).
When I try to execute the report it throws following error :
*[nQSError: 42015] Cannot function ship the following expression: Evaluate( FIRST_VALUE(%1) OVER (PARTITION BY %2 ORDER BY %3),D1.c4, D1.c2, D1.c13)*
Can anybody help me with this? Where am i going wrong?
Regards,
Vikas

Hi Kishore,
I am using the exactly same formula which you have mentioned here still it is giving me the same error.
EVALUATE('First_value(%1) over (partition by %2 order by %3)' AS DOUBLE , "Fact - Customer SubLedger"."OPENING BALANCE",Customer.CUST_ACCOUNT_NUMBER, "GL Date".DAY)
Error : *[nQSError: 42015] Cannot function ship the following expression: Evaluate( First_value(%1) over (partition by %2 order by %3),D909.c9, D909.c3, D909.c14)*
Can't say why it is behaving like this.
Anyways thanks all of you for your help.
May be I am going wrong somewhere else.I will try to solve this issue by myself.
Once again thanks to all of you.
Regards,
Vikas

Error while using the function module GUI_UPLOAD

Hi,
My requirement is to upload the data from .txt file into internal table.
I have given my code like this
PARAMETERS: p_fname LIKE rlgrap-filename.
data: begin of gt_string occurs 0,
       record type char255,
      end of gt_string.
AT SELECTION-SCREEN ON VALUE-REQUEST for p_fname.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
   EXPORTING
    PROGRAM_NAME        = SYST-REPID
    DYNPRO_NUMBER       = SYST-DYNNR
    FIELD_NAME          = ' '
     STATIC              = 'X'
    MASK                = ' '
    CHANGING
      file_name           = p_fname
   EXCEPTIONS
     MASK_TOO_LONG       = 1
     OTHERS              = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = p_fname
     FILETYPE                      = 'ASC'
     HAS_FIELD_SEPARATOR           = 'X'
     HEADER_LENGTH                 = 0
    READ_BY_LINE                  = 'X'
    DAT_MODE                      = ' '
    CODEPAGE                      = ' '
    IGNORE_CERR                   = ABAP_TRUE
    REPLACEMENT                   = '#'
    CHECK_BOM                     = ' '
    NO_AUTH_CHECK                 = ' '
IMPORTING
    FILELENGTH                    =
    HEADER                        =
    tables
      data_tab                      = gt_string
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here I am getting dump error as 'Type conflict when calling a function module.
The function module interface allows you to specify only fields
of a particular type under "FILENAME". The field "P_FNAME" specified here has a different field type'.
What would be the reason for this error?
Can anyone help me?
Regards,
Hema

see this sample program for F4 help
*& Report ZSD_EXCEL_INT_APP
REPORT ZSD_EXCEL_INT_APP.
parameter: file_nm type localfile.
types : begin of it_tab1,
        f1(20),
        f2(40),
        f3(20),
       end of it_tab1.
data : it_tab type table of ALSMEX_TABLINE with header line,
       file type rlgrap-filename.
data : it_tab2 type it_tab1 occurs 1,
       wa_tab2 type it_tab1,
       w_message(100) TYPE c.
at selection-screen on value-request for file_nm.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME        = SYST-REPID
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
   STATIC              = 'X'
MASK                = ' '
CHANGING
   file_name           = file_nm
EXCEPTIONS
   MASK_TOO_LONG       = 1
   OTHERS              = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
refresh it_tab2[].clear wa_tab2.
file = file_nm.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    filename                      = file
    i_begin_col                   = '1'
    i_begin_row                   = '1'
    i_end_col                     = '10'
    i_end_row                     = '35'
tables
    intern                        = it_tab
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at it_tab.
case it_tab-col.
   when '002'.
    wa_tab2-f1 = it_tab-value.
   when '004'.
    wa_tab2-f2 = it_tab-value.
when '008'.
    wa_tab2-f3 = it_tab-value.
endcase.
at end of row.
append wa_tab2 to it_tab2.
clear wa_tab2.
endat.
endloop.
data : p_file TYPE rlgrap-filename value 'TEST3.txt'.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*--- Display error messages if any.
IF sy-subrc NE 0.
    MESSAGE e001(zsd_mes).
    EXIT.
ELSE.
*---Data is downloaded to the application server file path
    LOOP AT it_tab2 INTO wa_tab2.
      TRANSFER wa_tab2 TO p_file.
    ENDLOOP.
ENDIF.
*--Close the Application server file (Mandatory).
CLOSE DATASET p_file.
loop at it_tab2 into wa_tab2.
write : / wa_tab2-f1,wa_tab2-f2,wa_tab2-f3.
endloop.

Internal Error while using Table Functions

Here is the query
select * from table (cast(sf_frontend.SF_STDDEV(2002,'Q','1',20,'N') as
NDeviation))
It gives this error
ORA-00600: internal error code, arguments: [17274], [4], [], [], [], [], [], []
Can anyone help me out... Any help will be appreciated
[email protected]

1. Have the screen open where you have the Shift F2, you can manually run the query of the formatted search, it will sometimes give you more meaningful message.
Eg:
You have a formatted search query 'Query 1' which is saved in Tools> User Query> Query 1 attached to field DocTotal.
So, what you do is, instead of pressing Shift F2, you go to tools > User Query.> Query 1 to run it.
2. Another thing could be the field you used in the formula do not have the focus when you run it.
Eg: you use $[4.0.0] in the query.
When you press Shift F2, the field represents $[$4.0.0] do not have focus.

Error while using copy function for position in IT 1001

Hi All,
I am getting the following error " For infotype 1001 in status 1, function COP is not allowed" when I am changing the Org unit relationship (A003) in IT 1001 for a position
Steps followed:
po13 -> choose position -> select relationship IT-> click overview -> select A003 -> click on copy button
then I get the above error.
Analysis I have done till now :
1. In IDES everything is working fine.
2. I checked the Time constraint for IT 1001 and it was 3
Thanks for the help in advance
Ram Prakash

Hi Ram,
please check, if the note 1396300 is implemented in your system?
If so, check the table T777F.
It should have the following entries:
MANDT ISTAT INFTY FCODE
002   1     ****   AEND
002   1     ****   COP
002   1     ****   CUTI
002   1     ****   DEL
002   1     ****   DISP
002   1     ****   INSE
002   1     ****   LISD
002   1     ****   PLVO
In case these entries are missing, please do an adjustment with your 000-client.
Hope this help
Sarah

ODI Error while using substring function in odiref.getTable function

Hi,
I am trying to strip the interface table name in the IKM code.Below is the code
create unique index      <%=odiRef.getTable("L","INT_NAME","W").substring(0,20)%>
*on          <%=odiRef.getTable("L","INT_NAME","W")%>(<%=odiRef.getColList("", "[COL_NAME]", ", ", "", "UK")%>)*
*<%=odiRef.getUserExit("FLOW_TABLE_OPTIONS")%>*
But i get the below error, can some one please help ?
com.sunopsis.tools.core.exception.SnpsSimpleMessageException: Error during task interpretation
Task:8
java.lang.Exception: BeanShell script error: Parse error at line 2, column 10. Encountered: ( BSF info: Create Unique Index on flow table at line: 0 column: columnNo
     at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:635)
     at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:671)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:441)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
Caused by: org.apache.bsf.BSFException: BeanShell script error: Parse error at line 2, column 10. Encountered: ( BSF info: Create Unique Index on flow table at line: 0 column: columnNo
     at bsh.util.BeanShellBSFEngine.eval(Unknown Source)
     at bsh.util.BeanShellBSFEngine.exec(Unknown Source)
     at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:621)
     ... 11 more
Text:create unique index      <?=snpRef.getObjectN
on          <?=snpRef.getObjectName("L", "%INT_PRFL1_PROC_SHR_APRC_AMTZ_RQST", "W") ?>(WKFL_ACTV_ID)
NOLOGGING
     at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:692)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:441)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
Thanks,
Babu.

Hi Ram,
please check, if the note 1396300 is implemented in your system?
If so, check the table T777F.
It should have the following entries:
MANDT ISTAT INFTY FCODE
002   1     ****   AEND
002   1     ****   COP
002   1     ****   CUTI
002   1     ****   DEL
002   1     ****   DISP
002   1     ****   INSE
002   1     ****   LISD
002   1     ****   PLVO
In case these entries are missing, please do an adjustment with your 000-client.
Hope this help
Sarah

Error while using RSDRI_INFOPROV_READ : parallel processing error

Hi
I am also facing parallel processing error while using the function module RSDRI_INFOPROV_READ in transformation.
when only one data package is there, the load happens without any issue. But when multiple data packages are involved the load fails with an error "Exception in parallel processing".

Hi Lijo,
I got the following information from the function module documentation of the FM RSDRI_INFOPROV_READ.
If neither I_SAVE_IN_FILE nor I_SAVE_IN_TABLE are set, then the return takes place in the form of packages (that is an internal table), of value I_PACKAGESIZE. A negative value means that the return should be in one package.
Prathish.

Inconsistent FOTY0001: type error while using translateFromNative

I am getting FOTY0001: type error while using translateFromNative function in assign activity.
This error happens only in the below scenarios:
1. Create a BPEL process with file input adapter that accepts simple xml string as input and accepts files like input*.txt.
2. Create a simple XSD(Fixed Length native XSD) and convert the simple string to XML using translateFromNative function and copy it into a variable.
3. Switch off the process
4. Put atleast 10 input*.txt files in the folder and switch on the process.
This error doesn't happen when I put one file at time.. Even when I put multiple files, the error happens for few instances inconsitently.
Here is our assign activity
<assign name="Assign_1">
<copy>
<from variable="PlantChemMsg" part="Chemistry"
query="/ns2:Chemistry/ns2:chemistryString"/>
<to variable="tempChemistryString"/>
</copy>
<copy>
<from expression="ora:translateFromNative(bpws:getVariableData('tempChemistryString'), 'ChemistryLegacy1.xsd', 'Root-Element')"/>
<to variable="ChemistryOut" part="Root-Element"
query="/ns8:Root-Element"/>
</copy>
</assign>
Here is the error in group log:
ORABPEL-09500
XPath expression failed to execute.
Error while processing xpath expression, the expression is "ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'ChemistryLegacy1.xsd', 'Root-Element')", the reason is FOTY0001: type error.
Please verify the xpath query.
     at com.collaxa.cube.xml.xpath.BPELXPathUtil.evaluate(BPELXPathUtil.java:206)
     at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.evalFromValue(BPELAssignWMP.java:679)
     at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.__executeStatements(BPELAssignWMP.java:143)
     at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3705)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1654)
Any help would be appreciated. Thanks.
-Sridhar

James,
Thanks & Sorry for the late reply.
I used assign activity just because I have only one source and target element.
This error happens even with transform activity.
Also, all the input messages are same. So It is definitely not the issue with the input message.
One observation I did is:
The error doesn't occur when I use like below(Full Http url):
ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'http://psc-d674943.hdq.uss.com:7777/orabpel/default/TestTranslateFromNativeError/1.0/ChemistryLegacy1.xsd
', 'Root-Element')
But occurs when I use like below.
ora:translateFromNative(string(bpws:getVariableData('tempChemistryString')), 'ChemistryLegacy1.xsd', 'Root-Element')

Error in XSLT mapping while using string functions

Hi All,
While using tokenize() and substring-before() functions in XSLT mapping,we are getting an error.The error message is Unexpected symbol "" So while using string functions in XSLT mapping do we have to use any header functions.
Please through light on syntax etc.,of string functions in XSLT.
Thanx in advance,
Lokesh Dhulipudi
Edited by: LOKESH DHULIPUDI on Dec 27, 2007 7:32 AM

Hi,
Hope you have gone thru this help:
http://w3schools.com/xsl/default.asp
Rgds, Moorthy

Error while using Ago function

Similar Messages

Maybe you are looking for