Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0

I am getting an error while using a LabVIEW 8.2.1 dll from Visual C++ 6.0 application. This is what I am doing:
1) Created a dll using LabVIEW 8.2.1 (I used a tutorial from NI knowledge base: "Creating DLLs from 6.0i". It is a temperature conversion VI; input DegreeF and get DegreeC out). Instead of LabVIEW 6.0i, I used 8.2.1. It created the dll Convert_Temp.dll successfully.
2) Then I created a Visual C++ 6.0 application (used a tutorial from NI knowledge base: "Calling a DLL from Microsoft Visual C++ that was Generated by LabVIEW 6i). I could build the project and create an executable application F_To_C.exe.
3) Then copied the LabVIEW dll Convert_Temp.dll into the folder where F_To_C.exe resides. Using windows explorer, went into that folder, and executed the application. I got the following error:
System Error 998 while loading the LabVIEW run-time engine (C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\lvrt.dll).
Convert_Temp requires a version 8.2.1 (or compatible) LabVIEW Run-Time Engine. Please contact the vendor of Convert_Temp to correct this problem.
I checked the folder: C:\Program Files\National Instruments\Shared\LabVIEW Run-Time\8.2\. It has the file lvrt.dll.
So why am I getting this error?
GKB

sounds like you need to install the LabVIEW 8.2.1 runtime. Not the 8.2 runtime engine.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Similar Messages

Error while installing LabVIEW on Linux

Getting Error while installing LabVIEW on Linux and unable to use VISA.
Please check the installation Log i Have attached.
nilesh
Attachments:
Installation Log LV2012 Linux.txt ‏25 KB

I could not find a trail version for LINUX.
Its only available for Windows and mac.
Will it possible for you to give just the C++ library and include files??

Error while using P2V in Oracle VM 2.2 version

Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AM

user10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Error while using UTL_FILE

I am getting the following error while using UTL_FILE procedure while using UTL_FILE.FOPEN procedure
from system account. I am using Windows XP with NTFS.
SQL> create or replace directory FILE_DIR as 'C:\'
2 /
Directory created.
SQL> grant read on directory FILE_DIR to public;
Grant succeeded.
1 create or replace PROCEDURE file_upload IS
2 v_file_name VARCHAR2(200);
3 v_file_type UTL_FILE.FILE_TYPE;
4 v_line VARCHAR2(1000);
5 BEGIN
6 v_file_name := 'customers_'||TO_CHAR(SYSDATE,'dd')||TO_CHAR(SYSDATE,'MON')||TO_CHAR(SYSDATE,'YYYY')||'.txt';
7 v_file_type := UTL_FILE.FOPEN('FILE_DIR','V_FILE_NAME','r',1000);
8 UTL_FILE.GET_LINE(v_file_type,V_LINE,1000);
9 UTL_FILE.FCLOSE(v_file_type);
10 DBMS_OUTPUT.PUT_LINE(V_LINE);
11* END;
SQL> exec file_upload;
BEGIN file_upload; END;
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
ORA-06512: at "SYSTEM.FILE_UPLOAD", line 7
ORA-06512: at line 1
I appreciate if someone can help me in this regard.
Thanks in Advance.
Regards
Muhammad ALi

Hello,
What exactly are you trying to do? Here I got 2 examples for you , replace with your directory name and pick right option for 'a' (append) or 'w' (write) or 'R' (read).
To read from a directory_ . This will read an existing file 'customer.txt" from the directory
{code}
CREATE OR REPLACE PROCEDURE .file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'R');
UTL_FILE.get_line (v_file_type, v_line); -- Error was here
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
_*To open a file*_ This will create customer_XXXXX file under the directory
{code}
CREATE OR REPLACE PROCEDURE testme.file_upload
IS
v_file_name VARCHAR2 (200);
v_file_type UTL_FILE.file_type;
v_line VARCHAR2 (1000);
BEGIN
v_file_name := 'customers_'
|| TO_CHAR (SYSDATE, 'dd')
|| TO_CHAR (SYSDATE, 'MON')
|| TO_CHAR (SYSDATE, 'YYYY')
|| '.txt';
v_file_type := UTL_FILE.fopen ('EXT_TABLES', v_file_name, 'a');
UTL_FILE.put_line (v_file_type, v_line);
DBMS_OUTPUT.put_line (v_line);
UTL_FILE.fclose (v_file_type);
END;
{code}
Regards
Edited by: OrionNet on Jan 29, 2009 12:30 AM

Error while using DB Adapter in BPEL process

Hi All,
I am getting error while using DB Adapter in BPEL process
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
I am not able to solve this.
Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

did u deploy your dbadapter through console to the plan mentioned for deployment?

In Oracle 10g Error while using COLLECT

I getting error while using collect in 10g
SQL> ed
Wrote file afiedt.buf
1 SELECT deptno
2 , COLLECT(ename) AS emps
3 FROM emp
4 GROUP BY
5* deptno
SQL> /
, COLLECT(ename) AS emps
ERROR at line 2:
ORA-00932: inconsistent datatypes: expected NUMBER got -
Please give me the solution.

you are using old version of SQL*Plus. if you use later version it will give you correct result.
Edited by: unus on Mar 14, 2010 4:25 AM

Error while using XML Iview, please contact your system administrator.

Hello everybody,
I have already posted a detailed message for the XML iview problem sometime back but havent got any reply so far. All the replies had come from users who are also facing the same problem. I am trying to use a XML iview for fetching RSS feeds from one of the internet source, i have entered the proper URL and selected the proper RSS to XHTMLB transformer also and have entered the proxy settings in the http service and enabled it and restarted it also, but again when i am previewing the Iview its giving me the error <b>"Error while using XML Iview, please contact your system administrator."</b>. I am using
    Area           Version
    J2EE Engine    6.40 PatchLevel 98256.313
    Portal         6.0.14.0.0
, can someone tell me whether its a bug in sp14 or i am missing something while creating this XML Iview. Expecting a proper reply.
Thanks in advance,
Regards,
Sarabjeet.

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

Error while using exp utility

Hi,
I am getting the following oracle error while using exp,
can someone please suggest on this,
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SIEBEL
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SIEBEL
About to export SIEBEL's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SIEBEL's tables via Conventional Path ...
. . exporting table EIM_ACCDTL_TNT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
. . exporting table EIM_ACCNTROUTE
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed
. . exporting table EIM_ACCNT_CUT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
. . exporting table EIM_ACCNT_DTL
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed

Satish is right, there exists bug for 11.1.0.6.
Look at metalink note 741984.1.
Bug number is 5872788 - there exists patch as well.

Error while uploading images to SAP Mobile Documents from iPad application using ObjectiveCMIS.

Hi,
I am getting the error while uploading images to SAP Mobile Documents from custom iOS(iPad )application using ObjectiveCMIS library.
My Custom method is as follows:
- (void)createSalesOrderRouteMapImageInFolder:(NSString*)salesOrderRouteMapFolderId routeMapImageTitle:(NSString *)imageTitle routeMapContent:(NSData *)imageData
    NSInputStream *inputStream = [NSInputStream inputStreamWithData:imageData];
    NSMutableDictionary *properties = [NSMutableDictionary dictionary];
    [properties setObject:[NSString stringByAppendingFileExtension:imageTitle] forKey:@"cmis:name"];
    [properties setObject:@"cmis:document" forKey:@"cmis:objectTypeId"];
    [self.session createDocumentFromInputStream:inputStream
                                       mimeType:@"image/png"
                                     properties:properties
                                       inFolder:salesOrderRouteMapFolderId
                                  bytesExpected:[imageData length]
                                completionBlock:^(NSString *objectId, NSError *error) {
                                    NSLog(@"Object id is %@",objectId);
                                    if(error == nil) {
                                        [inputStream close];
                                        NSLog(@"Uploading Sales order route map successfully.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderSuccessNotification object:nil];
                                    } else {
                                        [inputStream close];
                                        NSLog(@"Uploading sales order route map failed.");
                                        [[NSNotificationCenter defaultCenter] postNotificationName:SaveOrderFailedNotification object:error];
                                } progressBlock:^(unsigned long long bytesUploaded, unsigned long long bytesTotal) {
                                    NSLog(@"uploading... (%llu/%llu)", bytesUploaded, bytesTotal);
OBjectiveCMIS Method in which i am getting error during upload:
- (void)sendAtomEntryXmlToLink:(NSString *)link
             httpRequestMethod:(CMISHttpRequestMethod)httpRequestMethod
                    properties:(CMISProperties *)properties
            contentInputStream:(NSInputStream *)contentInputStream
               contentMimeType:(NSString *)contentMimeType
                 bytesExpected:(unsigned long long)bytesExpected
                   cmisRequest:(CMISRequest*)request
               completionBlock:(void (^)(CMISObjectData *objectData, NSError *error))completionBlock
                 progressBlock:(void (^)(unsigned long long bytesUploaded, unsigned long long bytesTotal))progressBlock
    // Validate param
    if (link == nil) {
        CMISLogError(@"Must provide link to send atom entry");
        if (completionBlock) {
            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeInvalidArgument detailedDescription:nil]);
        return;
    // generate start and end XML
    CMISAtomEntryWriter *writer = [[CMISAtomEntryWriter alloc] init];
    writer.cmisProperties = properties;
    writer.mimeType = contentMimeType;
    NSString *xmlStart = [writer xmlStartElement];
    NSString *xmlContentStart = [writer xmlContentStartElement];
    NSString *start = [NSString stringWithFormat:@"%@%@", xmlStart, xmlContentStart];
    NSData *startData = [NSMutableData dataWithData:[start dataUsingEncoding:NSUTF8StringEncoding]];
    NSString *xmlContentEnd = [writer xmlContentEndElement];
    NSString *xmlProperties = [writer xmlPropertiesElements];
    NSString *end = [NSString stringWithFormat:@"%@%@", xmlContentEnd, xmlProperties];
    NSData *endData = [end dataUsingEncoding:NSUTF8StringEncoding];
    // The underlying CMISHttpUploadRequest object generates the atom entry. The base64 encoded content is generated on
    // the fly to support very large files.
    [self.bindingSession.networkProvider invoke:[NSURL URLWithString:link]
                                     httpMethod:httpRequestMethod
                                        session:self.bindingSession
                                    inputStream:contentInputStream
                                        headers:[NSDictionary dictionaryWithObject:kCMISMediaTypeEntry forKey:@"Content-type"]
                                  bytesExpected:bytesExpected
                                    cmisRequest:request
                                      startData:startData
                                        endData:endData
                              useBase64Encoding:YES
                                completionBlock:^(CMISHttpResponse *response, NSError *error) {
                                    if (error) {
                                        CMISLogError(@"HTTP error when sending atom entry: %@", error.userInfo.description);
                                        if (completionBlock) {
                                            completionBlock(nil, error);
                                    } else if (response.statusCode == 200 || response.statusCode == 201 || response.statusCode == 204) {
                                        if (completionBlock) {
                                            NSError *parseError = nil;
                                            CMISAtomEntryParser *atomEntryParser = [[CMISAtomEntryParser alloc] initWithData:response.data];
                                            [atomEntryParser parseAndReturnError:&parseError];
                                            if (parseError == nil) {
                                                completionBlock(atomEntryParser.objectData, nil);
                                            } else {
                                                CMISLogError(@"Error while parsing response: %@", [parseError description]);
                                                completionBlock(nil, [CMISErrors cmisError:parseError cmisErrorCode:kCMISErrorCodeRuntime]);
                                    } else {
                                        CMISLogError(@"Invalid http response status code when sending atom entry: %d", (int)response.statusCode);
                                        CMISLogError(@"Error content: %@", [[NSString alloc] initWithData:response.data encoding:NSUTF8StringEncoding]);
                                        if (completionBlock) {
                                            completionBlock(nil, [CMISErrors createCMISErrorWithCode:kCMISErrorCodeRuntime
                                                                                 detailedDescription:[NSString stringWithFormat:@"Failed to send atom entry: http status code %li", (long)response.statusCode]]);
                                  progressBlock:progressBlock];
Attaching the logs:
ERROR [CMISAtomPubBaseService sendAtomEntryXmlToLink:httpRequestMethod:properties:contentInputStream:contentMimeType:bytesExpected:cmisRequest:completionBlock:progressBlock:] HTTP error when sending atom entry: Error Domain=org.apache.chemistry.objectivecmis Code=260 "Runtime Error" UserInfo=0x156acfa0 {NSLocalizedDescription=Runtime Error, NSLocalizedFailureReason=ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public void com.sap.mcm.server.service.AbstractChangeLogService.updateChangeLog(java.lang.String,boolean) throws com.sap.mcm.server.api.exception.MCMException method on bean instance com.sap.mcm.server.nw.service.NwChangeLogService@4e7989f3 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|NwChangeLogService in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.ejb.EJBTransactionRolledbackException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a; nested exception is: javax.ejb.EJBException: ASJ.ejb.005044 (Failed in component: sap.com/com.sap.mcm.server.nw) Exception raised from invocation of public com.sap.mcm.server.model.ChangeLog com.sap.mcm.server.dao.impl.ChangeLogDaoImpl.findByUserId(java.lang.String) method on bean instance com.sap.mcm.server.dao.impl.ChangeLogDaoImpl@2852b733 for bean sap.com/com.sap.mcm.server.nw*annotation|com.sap.mcm.server.nw.ejb.jar*annotation|ChangeLogDaoImpl in application sap.com/com.sap.mcm.server.nw.; nested exception is: javax.persistence.NonUniqueResultException: More than 1 objects of type ChangeLog found with userId=25f8928e-8ba0-4edd-b08e-43bf6fb78f1a}
2015-03-12 04:08:31.634 Saudi Ceramics[4867:351095] Uploading sales order route map failed.

Hi Sukalyan,
Have you checked the below links?
These will give you step by step implementation procedure.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a099a3bd-17ef-2b10-e6ac-9c1ea42af0e9?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/WDJava/KmuploadusingWebdynproapplication
Regards,
Sandip

Error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element

Hi All,
I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
Error: 1 (Field level error)
SegmentID: NTE
Position in TS: 70
Data Element ID: NTE02
Position in Segment: 2
Data Value:
3: Too many data elements
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
Can it be done?
Thanks.

Sorry, no.
X12 does not support an escape character so whatever is used for delimiters become reserved characters.
If you want to allow '*' in the data, you will have to chooser a different Element delimiter. The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice.

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

"llegal character in path at index" Error While Using wsimport from ant.

Hi,
I am getting the following error, while using wsimport from ant build script. you have the details below. I dont have a clue on this error.
Error :
wsimport:
[echo] Generating the client stubs
[wsimport] error: Unable to parse "HelloService_schema1.xsd" : Illegal character in path at index 25: file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] line 0 of file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] error: Unable to parse "HelloService_schema1.xsd" : Illegal character in path at index 25: file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] line ? of file:/D:/Study/WebService Eclipse Project/examples/jaxws/helloservice/service/server/wsdl/HelloService.wsdl#types?schema1
[wsimport] error: Element "{http://endpoint.helloservice/}sayHello" not found.
Java WebService :
package helloservice.endpoint;
import javax.jws.WebMethod;
import javax.jws.WebService;
@WebService()
public class Hello {
private String message = new String("Hello, ");
@WebMethod()
public String sayHello(String name) {
return message + name + ".";
Ant Build.xml
<project name="${project.name}" basedir="." default="ear">
     <property file="WS_build.properties"/>
     <target name="init">
          
          <echo description="Setting the path for the project"/>
          <path id="classpath">
               <fileset dir="${lib.dir}" includes="*.jar"/>
               <fileset dir="${commonWSLib.dir}" includes="*.jar"/>
          </path>
          
          <echo description="WSGEN Definition"/>
          <taskdef name="wsgen" classname="com.sun.tools.ws.ant.WsGen">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </taskdef>
          
          <echo description="WSImport Definition" />
          <taskdef name="wsimport" classname="com.sun.tools.ws.ant.WsImport">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </taskdef>
     </target>
     <target name="Compile" depends="init">
          <echo description="Compiling the project"/>
          <mkdir dir="${build.dir}"/>
          <mkdir dir="${build.dir}/classes"/>
          <javac destdir="${build.dir}/classes" srcdir="${java.base}">
               <classpath>
                    <path refid="classpath"/>
               </classpath>
          </javac>
          <copy todir="${build.dir}/classes">
               <fileset dir="${java.base}" excludes="**/*.java"/>
          </copy>
     </target>
     <target name="wsgen" depends="Compile">
               <echo message="Generating the wsdl file[${project.name}Service.wsdl]" />
               <mkdir dir="${service.dir}"/>
               <mkdir dir="${service.dir}/server"/>
               <mkdir dir="${service.dir}/server/classes"/>
               <mkdir dir="${service.dir}/server/src"/>
               <mkdir dir="${service.dir}/server/wsdl"/>
               <wsgen sei="${sei.class}" destdir="${service.dir}/server/classes" genwsdl="true"
               sourcedestdir="${service.dir}/server/src" resourcedestdir="${service.dir}/server/wsdl">
                    <classpath>
                         <path refid="classpath" />
                         <pathelement location="${build.dir}/classes" />
                    </classpath>
               </wsgen>
     </target>
     <target name="copy" depends="wsgen">
               <echo message="Copying class and config files into ${web-inf.dir} folder" />
               <copy todir="${web-inf.dir}">
                    <fileset dir="${build.dir}"/>
                    <fileset dir="${service.dir}/server" includes="**/*.class"/>
                    <fileset dir="." includes="${lib.dir}/*.jar"/>
               </copy>
               <copy todir="${web-inf.dir}/${lib.dir}">
                    <fileset dir="${commonWSLib.dir}" includes="*.jar"/>
               </copy>
               <copy todir="${web-inf.dir}">
                    <fileset dir="${web-inf.dir}" includes="**/*.xml"/>
               </copy>
     </target>
     
     <target name="war" depends="copy">
          <echo message="Creating the war file [${project.name}.war]" />
          <mkdir dir="${dist.dir}"/>
          <mkdir dir="${dist.dir}/server"/>
          <war destfile="${dist.dir}/server/${project.name}.war" webxml="${web-inf.dir}/web.xml" basedir="${web.dir}"/>
     </target>
     <target name="wsimport" depends="war">
          <echo message="Generating the client stubs" />
          <mkdir dir="${service.dir}"/>
          <mkdir dir="${service.dir}/client"/>
          <mkdir dir="${service.dir}/client/classes"/>
          <mkdir dir="${service.dir}/client/src"/>
          <wsimport wsdl="${basedir}/${service.dir}/server/wsdl/${project.name}.wsdl"
               destdir="${service.dir}/client/classes"
               package="${wsimport.package}"
               sourcedestdir="${service.dir}/client/src">
          </wsimport>
     </target>
     <target name="clientjar" depends="wsimport">
<echo message="Creating the client jar file [${project.name}Client.jar] " />
<copy todir="${service.dir}/client/classes">
<fileset dir="${service.dir}/client/src"/>
</copy>
<mkdir dir="${dist.dir}/client"/>
               <tstamp>
               <format property="TODAY" pattern="yyyy-MM-dd hh:mm:ss" />
               </tstamp>
<jar destfile="${dist.dir}/client/${project.name}Client.jar"
basedir="${service.dir}/client/classes">
               <manifest>
               <attribute name="Built-By" value="${user.name}"/>
               <attribute name="Built-Date" value="${TODAY}"/>
               <attribute name="Implementation-Version" value="${version}-b${build.number}"/>
          </manifest>
          </jar>
<mkdir dir="${dist.dir}/client"/>
     </target>
     
     <target name="enginejar" depends="clientjar">
     <echo message="Creating the engine jar file for local call [${project.name}.jar] " />
          
          <tstamp>
               <format property="TODAY" pattern="yyyy-MM-dd hh:mm:ss" />
          </tstamp>
     <jar destfile="${dist.dir}/server/${project.name}.jar"
     basedir="${build.dir}/classes">
               <manifest>
                    <attribute name="Built-By" value="${user.name}"/>
                    <attribute name="Built-Date" value="${TODAY}"/>
                    <attribute name="Implementation-Version" value="${version}-b${build.number}"/>
          </manifest>
          </jar>
          </target>
          
          <target name="ear" depends="enginejar" >
               <echo message="Creating the ear file [${project.name}.ear]" />
               <ear destfile="${dist.dir}/server/${project.name}.ear" appxml="META-INF/application.xml">
               <fileset dir="${dist.dir}/server" includes="${project.name}.war"/>
          </ear>
               <antcall target="clean"></antcall>
          </target>
          
          <target name="clean">
               <echo message="Cleaning up folders " />
               <delete dir="${build.dir}"/>
               <delete dir="${service.dir}"/>
               <delete dir="${web-inf.dir}/classes"/>
               <delete dir="${web-inf.dir}/lib"/>
               <echo message="${project.name}.ear, ${project.name}.war, ${project.name}.jar and ${project.name}Client.jar is available in project's ${dist.dir} folder"/>
          </target>
</project>
Generated wsdl(HelloService.wsdl) :
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<definitions targetNamespace="http://endpoint.helloservice/" name="HelloService" xmlns:tns="http://endpoint.helloservice/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns="http://schemas.xmlsoap.org/wsdl/">
<types>
<xsd:schema>
<xsd:import namespace="http://endpoint.helloservice/" schemaLocation="HelloService_schema1.xsd"/>
</xsd:schema>
</types>
<message name="sayHello">
<part name="parameters" element="tns:sayHello"/>
</message>
<message name="sayHelloResponse">
<part name="parameters" element="tns:sayHelloResponse"/>
</message>
<portType name="Hello">
<operation name="sayHello">
<input message="tns:sayHello"/>
<output message="tns:sayHelloResponse"/>
</operation>
</portType>
<binding name="HelloPortBinding" type="tns:Hello">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="sayHello">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="HelloService">
<port name="HelloPort" binding="tns:HelloPortBinding">
<soap:address location="REPLACE_WITH_ACTUAL_URL"/>
</port>
</service>
</definitions>
Generated : HelloService_schema1.xsd
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<xs:schema version="1.0" targetNamespace="http://endpoint.helloservice/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="sayHello" type="ns1:sayHello" xmlns:ns1="http://endpoint.helloservice/"/>
<xs:complexType name="sayHello">
<xs:sequence>
<xs:element name="arg0" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:element name="sayHelloResponse" type="ns2:sayHelloResponse" xmlns:ns2="http://endpoint.helloservice/"/>
<xs:complexType name="sayHelloResponse">
<xs:sequence>
<xs:element name="return" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
If u need any other information let me know.

This has been resolved by uploading relevant jar file

3-1674105521 Multiple Paths error while using Bridge Table

https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
Customer Smiths Medical International Limited
Description: Multiple Paths error while using Bridge Table
1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
2. They found found out by adding these 3 joins, they ended with circular error.
[nQSError: 15001] Could not load navigation space for subject area GXODS.
[nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
Thanks
Teik

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3" 5.406 KB 1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

Error while using ALSM_EXCEL_TO_INTERNAL_TABLE

I am getting the exception "Upload OLE" while using this FM to upload data from excel sheet into SAP system. It errors out at the following statement inside the FM -
CREATE OBJECT obj_application 'Excel.Application'.
Any pointers?
Regards,
Shivali

hi, take a look at this code
*& Report ZKRIS_OLE3_PALETTE
*& Displays the full OLE color range in excel
REPORT ZKRIS_OLE3_PALETTE.
TYPE-POOLS ole2 .
DATA: count TYPE i,
       count_real TYPE i,
       application TYPE ole2_object,
       workbook TYPE ole2_object,
       excel     TYPE ole2_object,
       sheet TYPE ole2_object,
       cells TYPE ole2_object.
CONSTANTS: row_max TYPE i VALUE 256. " change to 16384 for excel 2007
DATA index TYPE i.
DATA:
      h_cell        TYPE ole2_object,        " cell
      h_f           TYPE ole2_object,        " font
      h_int         TYPE ole2_object,
      h_width       TYPE ole2_object,
      h_columns     TYPE ole2_object,
      h_rows        TYPE ole2_object,
      h_font        TYPE ole2_object,
      h_entirecol   TYPE ole2_object.
DATA: h_range       TYPE ole2_object.
DATA: h_merge       TYPE ole2_object.
CREATE OBJECT excel 'EXCEL.APPLICATION'.
IF sy-subrc NE 0.
WRITE: / 'No EXCEL creation possible'.
STOP.
ENDIF.
SET PROPERTY OF excel 'DisplayAlerts' = 0.
CALL METHOD OF excel 'WORKBOOKS' = workbook .
SET PROPERTY OF excel 'VISIBLE' = 1.
creating workbook
SET PROPERTY OF excel 'SheetsInNewWorkbook' = 1.
CALL METHOD OF workbook 'ADD'.
CALL METHOD OF excel 'WORKSHEETS' = sheet
EXPORTING
    #1 = 1.
SET PROPERTY OF sheet 'NAME' = 'Color Palette'.
CALL METHOD OF sheet 'ACTIVATE'.
DATA: col TYPE i VALUE 1,
row TYPE i VALUE 2,
col1 TYPE i VALUE 2,
col_real TYPE i VALUE 1.
row = 1.
col = 3.
CALL METHOD OF excel 'Cells' = h_cell
EXPORTING
    #1 = row
    #2 = col.
SET PROPERTY OF h_cell 'Value' = 'No.'.
col = col + 1.
CALL METHOD OF excel 'Cells' = h_cell
EXPORTING
    #1 = row
    #2 = col.
SET PROPERTY OF h_cell 'Value' = 'Background'.
col = col + 1.
CALL METHOD OF excel 'Cells' = h_cell
EXPORTING
    #1 = row
    #2 = col.
SET PROPERTY OF h_cell 'Value' = 'Foreground with white background'.
col = col + 1.
CALL METHOD OF excel 'Cells' = h_cell
EXPORTING
    #1 = row
    #2 = col.
SET PROPERTY OF h_cell 'Value' = 'Foreground with black background'.
CALL METHOD OF excel 'Rows' = h_rows
EXPORTING
    #1 = '2:2'.
SET PROPERTY OF h_rows 'WrapText' = 1.
col = 9.
CALL METHOD OF excel 'Cells' = h_cell
EXPORTING
    #1 = row
    #2 = col.
SET PROPERTY OF h_cell 'Value' = 'No.'.
col = col + 1.
CALL METHOD OF excel 'Cells' = h_cell
EXPORTING
    #1 = row
    #2 = col.
SET PROPERTY OF h_cell 'Value' = 'Background'.
col = col + 1.
CALL METHOD OF excel 'Cells' = h_cell
EXPORTING
    #1 = row
    #2 = col.
SET PROPERTY OF h_cell 'Value' = 'Foreground with white background'.
SET PROPERTY OF h_cell 'Bold' = 1.
col = col + 1.
CALL METHOD OF excel 'Cells' = h_cell
EXPORTING
    #1 = row
    #2 = col.
SET PROPERTY OF h_cell 'Value' = 'Foreground with black background'.
CALL METHOD OF excel 'Rows' = h_rows
EXPORTING
    #1 = '1:1'.
SET PROPERTY OF h_rows 'WrapText' = 1.
GET PROPERTY OF h_rows 'Font' = h_font.
SET PROPERTY OF h_font 'Bold' = 1.
count = 1.
count_real = count.
row = 2.
col = 3.
DO 56 TIMES.
PERFORM write_num_and_color.
ENDDO.
autofit
CALL METHOD OF excel 'Columns' = h_columns
EXPORTING
    #1 = 'C:L'.
GET PROPERTY OF h_columns 'EntireColumn' = h_entirecol.
SET PROPERTY OF h_entirecol 'Autofit' = 1.
write palette on lhs
*range
CALL METHOD OF excel 'Range' = h_range
EXPORTING
    #1 = 'A2'
    #2 = 'A20'.
CALL METHOD OF h_range 'Merge' = h_merge .
CALL METHOD OF excel 'Cells' = h_cell
EXPORTING
    #1 = 2
    #2 = 1.
SET PROPERTY OF h_cell 'Value' = 'Palette'.
SET PROPERTY OF h_cell 'Orientation' = 90.         "angled.
SET PROPERTY OF h_cell 'HorizontalAlignment' = 3. "center align
GET PROPERTY OF h_cell 'Font'    = h_f.
SET PROPERTY OF h_f 'Bold' = 1.                    "bold
SET PROPERTY OF h_f 'Name' = 'Comic Sans MS'.
SET PROPERTY OF h_f 'Size' = '14'.
SET PROPERTY OF h_cell 'VerticalAlignment' = 2. "center align
autofit
CALL METHOD OF excel 'Columns' = h_columns
EXPORTING
    #1 = 'A:A'.
GET PROPERTY OF h_columns 'EntireColumn' = h_entirecol.
SET PROPERTY OF h_columns 'ColumnWidth' = 4.
*&      Form write_num_and_color
      text
FORM write_num_and_color.
index = row_max * ( row - 1 ) + col.
CALL METHOD OF sheet 'Cells' = cells
    EXPORTING
      #1 = index.
SET PROPERTY OF cells 'Value' = count_real.
col = col + 1.
CALL METHOD OF excel 'Cells' = h_cell
    EXPORTING
      #1 = row
      #2 = col.
GET PROPERTY OF h_cell 'Interior'   = h_int.
SET PROPERTY OF h_int 'ColorIndex' = count_real.
col = col + 1.
CALL METHOD OF excel 'Cells' = h_cell
    EXPORTING
      #1 = row
      #2 = col.
SET PROPERTY OF h_cell 'Value' = 'Sample Text'.
GET PROPERTY OF h_cell 'Font'    = h_f.
SET PROPERTY OF h_f 'ColorIndex' = count_real.
col = col + 1.
CALL METHOD OF excel 'Cells' = h_cell
    EXPORTING
      #1 = row
      #2 = col.
GET PROPERTY OF h_cell 'Interior'   = h_int.
SET PROPERTY OF h_int 'ColorIndex' = 1.
SET PROPERTY OF h_cell 'Value' = 'Sample Text'.
GET PROPERTY OF h_cell 'Font'    = h_f.
SET PROPERTY OF h_f 'ColorIndex' = count_real.
row = row + 1.
col = col - 3.
count = count + 1.
IF count = 29.
    count = 1.
    row = 2.
    col = col + 6.
ENDIF.
count_real = count_real + 1.
ENDFORM.                    "write_num_and_color
hope this helps.
regs,
hema.

Error while using LabVIEW 8.2.1 Dll from Visual C++ 6.0

Similar Messages

Maybe you are looking for