Error with Constrain to crop check box

Sometimes when i click on contrain to crop check box and go to the next photo it will automatically uncheck itself. When i go back to image the box is unchecked, but the crop is still constrained. Then when i check the box again in becomes unconstrain. It is doing the oposite of what it should do. Im running Mac os 10.7.2. Is this a known issue? Please help.

The Constrain Crop function is flawed (or may I call it buggy?) and it's been that way at least back to LR3.x
Especially the interaction between Constrain Crop and the Scale slider has problems.
If you move the Scale slider to a value below 100 and then click the Constrain Crop box, then the Constrain Crop function will be stuck, and unclicking it will not turn off the effect. I.e. scaling up will continouosly enlarge the photo - it will be way bigger than 100% even at Scale numbers below 100.
This also works if Constrain Crop is selected first and then the Scale slider is moved below 100.
There is no way to clear this behavior within the Lens Correction pane. The only way to get back to normal is to go to Crop & Straighten and then Reset.
If you are working on a finicky perspective correction, this can stab you in the back severely!

Similar Messages

"Constrain to Crop" checked by default

How do i keep the "Constrain to Crop" box checked by default? Every single time i import images into lightrooom i have to check this box and then sync. I could save so much time if it were automatically checked.

I've played around with this and it seems to be working on my side. Every time I turn on the Constrain Crop option, it always crops out the grey area that appears when I've skewed the image enough to no longer fit in the rectangular border. Turning it off doesn't have an immediate effect because the image is already cropped (imagine if you had used the crop tool to crop your image and then that cropping was undone by turning off the Constrain Crop option). But all future movements of the sliders would be cropped.
It is possible this issue arrises from a problem with the catalog. There are a few things you can do to patch things up. The first is to Optimize the catalog (under the File menu). Also, when you backup your catalog, an integrity check is performed. Additionally, you can create a new catalog and import your old catalog into it. Sometimes this gives things a fresh start.

How do I change the text in a field with radio buttons or check box?

Hi All:
I have a form that has a list of things with check boxes (could be done with radio buttons) at the bottom. The client wants a single field at the top of the form that repeats the text next to the checkboxes. For example if a user checks the box next to the words "You did thing 1 wrong" the client wants "You did thing 1 wrong" to appear in this text box at the top of the form. If the user checks the box next to the words "You did thing 2 wrong" the client wants the words "You did thing 2 wrong" to appear in the magic box at the top of the page. There are 10 different check box options, so the box at the top would need to be able to have 10 different things in it.
Client is not interested in a drop down menu. I asked.
I am in a bit over my head here, so my question is twofold.
1. Can you do this in Acrobat Pro 10 on a Mac?
2. Can you supply me with code?
Thanks in Advance,
Amy W.

Create a text field and make this script its custom calculation script :
     var a ="";
     if (this.getField("Check1").value == "Yes"){
     a="You did thing 1 wrong";
     event.value = a;
Also, replace "Check1" with the name of your check box or radio button, and give it an export value of "Yes".

FRM-40501 Error When Attempting To Change Check Box Value

I am getting a FRM-40501 error when attempting to update/change a check box value. There are a few factors in my form setup that could be the problem, I will list them below:
My initial problem was that my INSERT statement would not trigger to fire (based on an IF statement) when my check box value was not initially set to the value of 'Y', even though the initial value was set to 'Y' in the property palette (value when checked was set to 'Y' and value when unchecked was set to 'N'). So, to remedy this I placed a specific literal select of 'Y' and aliased it back to the name of my check box name in the data block query, like: SELECT 'Y' CB_SELECT_SCHOOL FROM user_schools. Then I changed the check box to a database item (value to Yes when it was No before my "SQL select cheat" in the data block query). This made the initial value 'Y' and satisfied my IF statement before my INSERT statement in my trigger. However, now I can not update the check box item.
Does anyone know a better way to satisfy the initial value of my check box to 'Y', even though in the initial value parameter for my checkbox is set to 'Y' and forms is not really setting the initial value (when the check box is not set to a database item)?
Thanks in advance.
Kyle

I have fixed my issue.
I have reverted the check box to not be a database item, removed the "SQL cheat" of selecting 'Y' aliasing my checkbox name in the datablock SQL, and changed the initial value of 'N' in the check box property palette. This will force a change by the user making the check box value of 'Y', satifying my insert when-button-pressed trigger to fire and update the selected row.

Help with ON and OFF check boxs

Hi all
I have 2 check boxs one with no and one with yes.
Can anyone tell me what the code would be to do the following.
When I click on NO then click on YES I need to turn the NO off, and then when I click on YES it will turn NO of
Hope you undersatnd what I mean.
Just a on off code
Can someone show me the code
Thanks Craig

I think this is the job of the ButtonGroup class which you can use with JRadioButton.
But I'm not sure you can do this automatically with JCheckBox. You'll have to add a listener for each checkbox and enable/disable the checkbox according to which event was triggered.

How to set a signature field as 'Required' with selection of a Check Box

I have a set of 3 check boxes and would like to set a unique combination of pre-existing signature fields as 'required' for each respective check box.
Given Check Box names of Box1, Box2, Box3 and Signature Field names of Sig1, Sig2, Sig3, can someone provide example JavaScript for setting Sig1 and Sig3 as required upon a Mouse Up of Box 1?
Otherwise, can someone let me know if this might be more trouble than it's worth?
Thanks!

Sorry to keep you waiting Greenstead - and thank you for responding.
My need for this feature, however, has passed.
I do have another question or two, but will post as a separate thread.
Thanks again

Error with opendocument... BOXI 3.0

Why get the following error: Information is needed to be able to process this report.
document: Crystal report
version crystal 2008

Using
http://XAN-BO1/OpenDocument/opendoc/openDocument.jsp?sType=rpt&sDocName=Analysis_sales&sOutputFormat=P&sWindow=New
Edited by: Ilda Rojas on Oct 3, 2008 5:39 PM

Getting the value of a check box - annoying error

Hi guys,
Ive got a web page with sets of hidden variables and check boxes which relate to different courses, but when I try and itterate through the value of the check box to see if it is checked or not im getting an outofIndexArray error because im using
for(int i=0; i<paramValues.length;i++)
{ which relates to the number of courses which does agree with the number of check boxes, but not when they are unchecked.
i.e. when some of the boxes are not checked then it gives this error, however when all are checked it is fine.
How do I get it to not give this error, i.e. how do I set the value of a check box when it is not checked as on several web pages it shows how to set the value when they are checked.
thanks
tzaf

i don't see the error, can you post some more code?
what is paramValues?
you iterate over the number of checkboxes?
every checkbox can be selected or deselected (boolean isSelected())
how can there are an exception?
what is the array where the exception occur

Problem getting check boxes and radio button to click with applescript

This is my script, it runs through without error, i can see the check box lightly flash like its being focused in on, but it wont actually check mark the box. it does this with all my check boxes and radio buttons.
tell application "Adobe InDesign CS3"
activate
end tell
tell application "System Events"
tell process "InDesign"
tell menu bar 1
click menu bar item 12
key code 125
key code 125
key code 124
key code 125
key code 125
key code 36
delay 1
end tell
tell window "Variable Links"
click checkbox "Use InDesign Tags Filter"
end tell
end tell
end tell

Hi craneium and welcome
For me this script fails, going through it step by step it seems confused, as I have highlighted out in the below code.
where is the window "Variable Links, may be I can help.
tell application "Adobe InDesign CS3"
activate
end tell
tell application "System Events"
tell process "InDesign"
tell menu bar 1
click menu bar item 12 --opens spotlight search in help
key code 125 -- highlights indesign help
key code 125 -- highlights welcome screen
key code 124 -- goes to apple
key code 125 -- goes to about this computer
key code 125 -- highlights software update
key code 36 -- starts software update
delay 1 -- ?
end tell
tell window "Variable Links" -- error cant get window variable links
click checkbox "Use InDesign Tags Filter"
end tell
end tell
end tell
Budgie

GR based IV check box suppressed - Extended Classic Scenario

Hello Folks,
How are you doing today ?
We are working in SRM 5.0 Extended Classic scenario.
When created the Local PO in SRM with GR Based IV Check box active, the
follow-on back-end Purchase order is generated without this flag. In
other terms, system is creating the follow-on ECC PO without GR Based
IV check box active. As a result, we are unable to run the ERS cycle.
Back-end system in above scenario is ECC 6.0. And vendor settings are
maintained with GR based IV flag on in both ECC and SRM.
Kindly advice.
Thank you for your assistance !

Hi Ravi and Yann,
Thank you for your inputs. OSS note-956083 can not be applied in my case due to the hight system version (patch level 550).
I have already raised this issue to SAP, but in the lack of proper infrastrucure SAP can not access the system. (BASIS guys are still struggling with it)
Well...let me give you recap-
We have not activated nor implemented any BAdi so far (Vanila SRM 5.0 EC scenario) PO creation for goods is working fine and as desired. But when it come across with PO with limit item or services, system throws an error as -
"PO 5100000263: Service-based invoice verif. requires GR "NO" or G R-based invoice verif."
Would deeply appreciate if you guys can share insight on this issue.
Thank you for your assistance!

How do I create a check-box matrix question using Acrobat XI Pro?

I would like to insert a question that is a 10 x 10 matrix that allows respondents to select multiple boxes in each row. For example, the "add item > rating scale" feature formats a matrix the way I would like, although it only seems to allow for radio buttons. With this feature, respondents can only select one item per row. Is there any way to use this feature with check-boxes rather than radio buttons? Or a different feature to create a matrix that allows for multiple selections per row?
Thanks so much,
Andy

I created a 30 page Form in Microsoft Word with 20 to 30 check boxes on each page using the Zapf Dingbats Font.
When I used Acrobat XI Pro to automatically convert the form it fails to create usable check boxes.
It worked properly about 3 times on test pages but it will not do it again.
Manually inserting check boxes one by one on 30 pages is mind numbing to say the least.
Why doesn't the software work properly anymore?

How to capture check box click in ALV

Hi,
I have requirement in which after displaying the ALV out put, immediately when the check box is checked i need to capture it and proceed with further coding with that input.
Check box click is not getting captured in "USER COMMAND or LINE SELECTION"
Could you please suggest a way.
Regards
venkatesh.

Venkatesh,
If you are using cl_gui_alv_grid you need to register "change" event to catch the checkbox change.
you do so with this method of cl_gui_alv_grid class :
register_edit_event( i_event_id = cl_gui_alv_grid=>mc_evt_modified ).
event handler class
class lcl_event_receiver definition.
public section.
    methods:
    user_command for event user_command of cl_gui_alv_grid
    importing e_ucomm,                                      "#EC NEEDED
    data_changed for event data_changed of cl_gui_alv_grid
    importing er_data_changed e_onf4 e_onf4_before e_onf4_after e_ucomm,"#EC NEEDED
endclass.
global data
data: o_event_receiver      type ref to lcl_event_receiver.
data: goo_grid type ref to cl_gui_alv_grid.
At the displaying of your grid / register the change event and set handlers
goo_grid->register_edit_event( i_event_id = cl_gui_alv_grid=>mc_evt_modified ).
    set handler:
      o_event_receiver->user_command for goo_grid,
      o_event_receiver->data_changed for goo_grid.
hope this helps...
regards

Check box displaying reports

hello
I have some issues with a multi-choices check box. I use it to display a report using a combination of parameters correspondins to the checked items.
Here are choices:
DUNS
SIC CODE
Industry
Sub Industry
Total
But When I want to display a report using DUNS, SIC CODE and INDUSTRY for instance, I get to see the report using SIC CODE/DUNS, the one using DUNS/INDUSTRY, the one using SIC CODE/INDUSTRY and finally the one I want using SIC/DUNS/industry. I use a conditionnal display :
Text in Expression 1 Is Contained in Value of Item in Expression 2
expression 2= P1_ANALYSE (the checkbox)
expression 1= 1:2:3
I want to display the report only if its exact parameters are checked and not other. I understand that the conditionnal display I use may not do that, so I tried
select from dual
where P1_ANALYSE=1
and P1_ANALYSE=2
and P1_ANALYSE=3
also select "P1_ANALYSE equals 1" and...
Doesn't work either.
so if someone could help me that would be great :)

No one?

Check box Item property in mutiple record block

Hi,
I have migrated a number of forms from 6i to 10g. All seems to be working apart from a problem with the display of check boxes that are part of a multiple record block. The item property for the checkbox has font weight set to bold and this works fine on the 6g version. On the 10g version it is displayed as normal font weight.
Any other items in the record, text items etc are displayed in bold correctly.
As this seems to affect a lot of forms is there some patch/fix that I should have applied or is this just the way it is?
I am trying to use set_item_instance_property to set them manually but that doesn't seem to make any difference.
Thanks in advance and Happy Christmas/New Year.

Problem solved following response from Oracle support desk -
UPDATE
======
Hi Dave,
When using lookandfeel=generic, the colors for different Windows items (e.g., menu, check
box, window background ...etc) are taken directly from the Operating System
(OS) user settings. I tested the issue with lookandfeel=oracle and with
colorScheme set to different values, and check box tick in this case takes the
same color as the color scheme used.
I suggest then using dark color scheme to give you a similar effect as it was in Forms 6i. for example:
colorScheme=Titanium

Outputting check box input to text box

I have another javascript question regarding Acrobat.
I have an order form with 3 categories of check box sets.
Set 1
a
b
c
d
Set 2
e
f
g
h
Set 3
i
j
Each checkbox outputs the SKU of an item which in this case is insignificant.
Here are the scenarios available to the user.
Option 1 - One option from Set 1 AND one option from Set 2 must be selected. (Which i have working just fine)
OR
Option 2 - One option from Set 3 must be selected.
These are the only possible options.
I have a text box set to read only as the total box. It totals up the cost based on the options they select.
If they select option 1 it needs to output $285 to the total box
If they select option 2 it needs to output $475 to the total box.
My theory is that I need to make an if then statement but I don't understand how to write the code for this to work.
Any one's expertise would be extremely helpful.
Thanks

Are these fields independent from one another, or is each set a group of fields with the same name but different export values?

Error with Constrain to crop check box

Similar Messages

Maybe you are looking for