Error with dbms_redefinition package?
Hi everybody!
I have a table ‘object_log’(it is partioned) .
I used dbms_redefinition to change its partion , and evrythink was ok.
When I tried to redefine this table for the second time it failed!
I run this script
BEGIN
DBMS_REDEFINITION.start_redef_table(
uname => 'TL_ETL',
orig_table => 'OBJECT_LOG',
int_table => 'OBJECT_LOG2');
END;
This is the error:
Ora-12008 error in materialized view refresh path
Sorry, I didn'see the other errors
evrything is clear now :)
ORA-12008: error in materialized view refresh path
ORA-14400: inserted partition key does not map to any partition
ORA-06512: at "SYS.DBMS_REDEFINITION", line 50
ORA-06512: at "SYS.DBMS_REDEFINITION", line 1343
ORA-06512: at line 2
Similar Messages
-
Error with the Package Request while uploading epub package onto ACS4.
Hi,
Error with the Package Request while uploading epub package onto ACS4.
There was an error with the Package Request::<error xmlns="http://ns.adobe.com/adept" data="E_PACK_DATABASE http://localhost/packaging/Package Incorrect%20string%20value:%20'\x92Apran...'%20for%20column%20'creato r'%20at%20row%201"/>
Cheers
VikasSee http://forums.adobe.com/thread/771689?tstart=0
-
Error using dbms_redefinition package
Hi,
I am trying to use dbms_redefinition package to add a column to a table using primary key method
SQL> conn / as sysdba
Connected.
SQL> grant execute on sys.dbms_redefinition to hr;
Grant succeeded.
SQL> grant dba to hr;
Grant succeeded.
SQL> conn hr/<password>
Connected.
SQL> create table tab1(roll_no number constraint roll_pk primary key,last_name varchar2(30));
Table created.
SQL> insert into tab1 values (1,'Hall');
1 row created.
SQL> commit;
Commit complete.
SQL> insert into tab1 values (2,'Mall');
1 row created.
SQL> commit;
Commit complete.
SQL> insert into tab1 values (3,'Roll');
1 row created.
SQL> commit;
Commit complete.
Adding required column
SQL>
SQL> alter table tab1 add(first_name varchar2(30));
Table altered.
Checking if table can be redefined
SQL> exec dbms_redefinition.can_redef_table('HR','TAB1',DBMS_REDEFINITION.CONS_USE_PK);
PL/SQL procedure successfully completed.
Creating interim table
SQL> create table tab2 as select roll_no,first_name,last_name from tab1 where 1=2;
Table created.
Adding primary key to interim table
SQL> alter table tab2 add constraint roll_pk_1 primary key (roll_no);
Table altered.
Starting redefinition :
SQL> exec dbms_redefinition.start_redef_table('HR','TAB1','TAB2','ROLL_NO,FIRST_NAME,LAST_NAME');
BEGIN dbms_redefinition.start_redef_table('HR','TAB1','TAB2','ROLL_NO,FIRST_NAME,LAST_NAME'); END;
ERROR at line 1:
ORA-00439: feature not enabled: Advanced replication
ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
ORA-06512: at line 1
SQL>
Could you please help.
Thanks,
HaiderYou can, yes. That's why CAN_REDEF_TABLE and START_REDEF_TABLE both have an OPTIONS_FLAG argument that lets you specify whether you want to use the primary key or the ROWID to redefine the table.
SQL> drop table foo;
Table dropped.
SQL> create table foo( col1 number, col2 number );
Table created.I can't redefine the table using the primary key since there is no primary key
SQL> ed
Wrote file afiedt.buf
1 begin
2 sys.DBMS_REDEFINITION.CAN_REDEF_TABLE ( 'SCOTT', 'FOO' );
3* end;
SQL> /
begin
ERROR at line 1:
ORA-12089: cannot online redefine table "SCOTT"."FOO" with no primary key
ORA-06512: at "SYS.DBMS_REDEFINITION", line 139
ORA-06512: at "SYS.DBMS_REDEFINITION", line 1782
ORA-06512: at line 2But I can use the ROWID
SQL> ed
Wrote file afiedt.buf
1 begin
2 sys.DBMS_REDEFINITION.CAN_REDEF_TABLE ( 'SCOTT', 'FOO', dbms_redefinition.cons_use_rowid );
3* end;
SQL> /
PL/SQL procedure successfully completed. Justin -
[Solved]Error with installing package: /usr/lib64 exists in filesystem
So i know there are other posts about this and i have read them and I have also read the wiki https://wiki.archlinux.org/index.php/De … _in_.2Flib and also this forum post https://bbs.archlinux.org/viewtopic.php?id=156942
the error i get when trying to install a package from the AUR
error: failed to commit transaction (conflicting files)
hp-health: /usr/lib64 exists in filesystem
Errors occurred, no packages were upgraded.
I tried to find who owned the files/package in the /lib by the following commands
$ grep '^lib/' /var/lib/pacman/local/*/files
$ find /lib -exec pacman -Qo -- {} +
the output was
/lib is owned by filesystem 2015.02-1
Im confused what to do at this point as the wiki that I linked above says
If any package apart from glibc is listed as owning a file, that package needs to be updated to install its files in /usr/lib
Last edited by PigsInSpace (2015-03-01 02:25:24)You are following directions for a file conflict with /lib for a very specific one-time manual intervention, but you don't have that file conflict according to the error message you posted and it is not for that intervention. See this instead: https://wiki.archlinux.org/index.php/Pa … 9.22_error then report the error on the aur page for that package.
This fixes it:
package() {
cd "$srcdir"
+ mv usr/lib64 usr/lib
cp -a opt usr var "$pkgdir" -
Still receiving errors with CC packager
I'm still receiving the following: "An error has occured during download. Please try again later." message when attempting to download apps for a package.
Am using version 1.1.Every time I log in CCdesktop and I try open new app (acrobat or IDCC or illus) AAM appear on desktop saying to accept condition, after that ask me again log in and finally the message below forces me to exit...
Error
There was an error with this action. Try again later.
0a9b7a44-f310-410e-bf68-32915b0f43d7
It's very a big problem this upadte! -
Error with SSIS package running as SQL Agent job
I have a strange issue.
I have a SQL Agent job that execute 5 steps, each step is an SSIS package that imports a CSV file to a temp table, then executes a SQL script to update a production table.
This job runs every 3 mins, every day, and has been for over a year.
Every once in a while it will start failing on step 2. Sometime it only happens for a couple of runs, other times I have to restart the SQL server. Once it corrects itself, it could be months before it happens again, but usually happens every
few weeks.
The error in the job history is: "Unable to bulk copy data. You may need to run this package as an administrator"
Obviously I have all the permissions correct, as it was running successfully every 3 mins before this error suddenly starts. I'm at a loss as to what the problem is. It is always on step 2, which is identical to step 1 except its a different CSV file
going to a different table. As I typed this, it failed twice, then was successful afterwards.
Any ideas where to look for further information? I've checked the event viewer and looked in the SQL logs, nothing stands out at this time.Hi Kerberos35,
It seems to be caused by the UAC feature which makes SSIS use the low-permissions token of the administrator Windows account under which the job runs. This issue is described in the following KB article:
http://support.microsoft.com/kb/2216489/en-us
To resolve the issue, you can install the latest service pack for your SQL Server. To work around this issue, you can also use one of the following two methods:
Method 1: Replace the SQL Server Destination components in the Data Flow Tasks that are failing with OLE DB Destination components that point to the same SQL Server connection manager.
Method 2: Create a SQL Server Agent proxy by using a Windows account that is not a member of the local Administrators group after you assign Create Global Objects permissions to that account.
To do this, follow these steps:
Click Start, point to Administrative Tools, and then click Local Security Policy.
Expand Local Policies, and then click User Rights Assignment.
In the details pane, double-click Create global objects.
In the Local Security Policy Setting dialog box, click Add.
In the Select Users or Group dialog box, click the user accounts that you want to add, click Add, and then click OK two times.
Regards,
Mike Yin
TechNet Community Support -
I am trying to retrieve a variable from an .as file from one mxml file, while setting it from another. I thought I had everything set up, but I am retrieving an error. 1119: Access of possibly undefined property loc through a reference with static type Class. I'm assuming I am missing something, but can't figure out what it is.
Any help is greatly appreciated.
This is how the value is set within the mxml
PickLocation.loc = cboPreviousLocations.value.toString();
I have imported the package.
import widgets.PickLocation;
The .as file
package
Bindable]
public class PickLocation{
public var _loc:String;
public function get loc():String {
return _loc;}
public function set loc(value:String):void { widgets{
_loc = value;Here is what I have and the error I am receiving.
Error 1042: The this keyword can not be used in static methods. It can only be used in instance methods, function closures, and global code.
package
Bindable]
public class PickLocation{
static public var _loc:String;
static public function get loc():String {
return _loc;}
static public function set loc(value:String):void { *****This is where the error is occurring._loc = value; }
I'm not following why I'm receiving the error considering I'm not using the this keyword anywhere. -
Some Error with Some packages on Unbreakable oracle Enteprice linux 5.2
Dear all,
when I Install Oracle EnterPrise Manager 10gR2 on Unbreakable oracle Enteprice linux 5.2 it requried fro me some packags which are nessaray for installer like the following packages
Checking operating system package requirements ...
Checking for compat-libstdc++-296-2.96-132.7.2; found Not found. Failed <<<<
Checking for libstdc++devel-3.4.3-22.1; found Not found. Failed <<<<
Checking for openmotif-21-2.1.30-11; found Not found. Failed <<<<
Checking for pdksh-5.2.14-30; found Not found. Failed <<<<
Checking for gnome-libs-1.4.1.2.90-44.1; found Not found. Failed <<<<
Checking for xscreensaver-4.18-5.rhel4.2; found Not found. Failed <<<<but when I install thes packages ,the fllowing message is shown
oracle@alwosaby ~]$ rpm- ivh pdksh-5.2.14-30.3.x86_64.rpm
warning: pdksh-5.2.14-30.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 0c98ff9d
error: Failed dependencies:
pdksh conflicts with ksh-20060214-1.7.x86_64
*[root@test Desktop]# xscreensaver-4.18-5.rhel4.14.x86_64.rpm*
bash: xscreensaver-4.18-5.rhel4.14.x86_64.rpm: command not found
*[root@test Desktop]# rpm -ivh xscreensaver-4.18-5.rhel4.14.x86_64.rpm*
warning: xscreensaver-4.18-5.rhel4.14.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1d1e034b
error: Failed dependencies:
xloadimage is needed by xscreensaver-4.18-5.rhel4.14.x86_64
*[root@test Desktop]# rpm --import /usr/share/rhn/BETA-RPM-GPG-KEY*
*[root@test Desktop]# rpm -ivh xscreensaver-4.18-5.rhel4.14.x86_64.rpm*
warning: xscreensaver-4.18-5.rhel4.14.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1d1e034b
error: Failed dependencies:
xloadimage is needed b
oracle@alwosaby ~]$ uname -a
Linux alwosaby 2.6.18-92.el5 #1 SMP Fri May 23 23:40:43 EDT 2008 x86_64 x86_64 x86_6 4 GNU/Linux
Please how i install these packages ?
If any one have exprecie about this problem , Can Help me?
Regards
alwosaby
Edited by: user2985354 on 28/01/2009 09:01 مYou are mixing redhat provided packages with OEL. Generally, it's not a good idea to mix packages of different distributions.
The media you've used to install OEL contains these packages. Use these. -
Error with Data package execution from BPF or running package from custom b
custom button.
1. When run package from BPF or custom button an error apear (for all users): "Subscript out of range".
Package dynamic script
PROMPT(SELECTINPUT,,,,"BUDGETHOLDER,CONTRACTOR,ENTITY,RPTCURRENCY,SCENARIO,VERSION")
TASK(ZMF_BPC_LOGIC_RUN,EQU,%EQU%)
TASK(ZMF_BPC_LOGIC_RUN,SUSER,%USER%)
TASK(ZMF_BPC_LOGIC_RUN,SAPPSET,%APPSET%)
TASK(ZMF_BPC_LOGIC_RUN,SELECTION,%SELECTION%)
TASK(ZMF_BPC_LOGIC_RUN,SAPP,%APP%)
TASK(ZMF_BPC_LOGIC_RUN,LOGICFILENAME,PAY_DEPT.LGF)
2. After click OK such selection screen appear.
3. When run package from eData menu u2013 Run package everything OK. And after running package from BPF or custom button everything become OK. (Only for user who run package from EData menu)
4. When Close BPC Excel and launch new BPC Excel error appear again.
The partners have posted a Message 247960 / 2010
created 23.03.2010 - 14:15:03 CET
Could you please comment on the issue?Hi Usman,
The solution is :
1. Edit the files updateConfigProperties.properties and
prependConfigProperties.properties in the installation directory:
Replace the hostname with the value present during the initial installation.
Note that the installation directory is the directory where SAPinst creates its log files.
The original hostname should be reflected in the names of the profiles created by the installation
(/usr/sap/<SID>/SYS/profile/<SID>_<Instance>_<hostname>).
If the log files of the initial installation are still available the original hostname can also be found in the file jengine.properties in the value of the property box.number. This file is located in the installation directory the initial installation
2. Restart the installation.
This has to work,it worked for me.
P.S: Give points,ok.
Rgs
vikas -
Hi All,
I am executing this command to create a package.
java -Xmx1024M -jar /ACS4/UploadTest-1_2.jar http://127.0.0.1:8080/packaging/Package /ACS4/sample_books/monteCristo.epub;
It returned an error:
Creating package request for: /ACS4/sample_books/monteCristo.epub
Creating connection to Packaging Server: http://localhost:8080/packaging/Package
Sending Package Request
There was an error with the Package Request
<error xmlns="http://ns.adobe.com/adept" data="E_ADEPT_MISSING_ELEMENT http://localhost:8080/packaging/Package expiration,%20nonce,%20or%20hmac"/>
Finished!
Successful packages created: 0
Unsuccessful package attempts:1
Here are the files that failed to package:
/ACS4/sample_books/monteCristo.epub
I am new to Java and Adobe Content Server. I don't know about this:
<error xmlns="http://ns.adobe.com/adept" data="E_ADEPT_MISSING_ELEMENT http://localhost:8080/packaging/Package expiration,%20nonce,%20or%20hmac"/>
Please help.Hi Jim,
With your help I setup some of pdf and epub files. I am just going to apply some restrictions on them and see how they will work. I have some other performance related questions.
- I Installed bluefire reader on my Ipad and try to download and open files in bluefire reader. It looks everything working for now. I am confused about rendering. When every time someone load a page it will fetch information from server? Is there something it store in cache and load from there?
- We are just worrying about server load thing. I am not sure if we need to use a separate server for this. It may be 100 persons together rendering information for different books. On the other hand our book size is also big. Those are around 100 MB each file.
Please let us know what is the best configuration for us. Thank you very much.
Regards,
Vijay Kumar -
Errors with Time Machine (not completing backup, and needing to erase the ".inProgress" package)
I have in a previous discussion been talking about errors with my Time Machine backup. The errors were with a problem with Indexing a file, it fails and stops the whole backup. Each time it attemps another backup, it fills my ".inProgress" package with a (nearly) whole backup, filling my Time Machine hard drive, and thus errasing my previous good backups. The error occurs after about 95% completion.
In my last post of a similar disscussion, the problem was indexing the Preference Pane files and this caused the whole backup to fail. This was my last post there: (below in some additional info of my situation)
I did exclude the MobileMe.prefPane. And I got:
12/16/11 9:24:50.468 PM com.apple.backupd: Starting standard backup
12/16/11 9:24:50.556 PM com.apple.backupd: Backing up to: /Volumes/3 TB GoFlex Drive/Backups.backupdb
12/16/11 9:25:14.418 PM com.apple.backupd: Waiting for index to be ready (101)
12/16/11 9:27:02.366 PM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|
12/16/11 9:27:02.366 PM com.apple.backupd: Finished scan
12/16/11 9:33:37.119 PM com.apple.backupd: Deep event scan at path:/Volumes/Mac OS Lion GM reason:must scan subdirs|
12/16/11 9:33:37.119 PM com.apple.backupd: Finished scan
12/16/11 9:36:15.650 PM com.apple.backupd: 758.92 GB required (including padding), 830.32 GB available
12/16/11 10:25:14.873 PM com.apple.backupd: Copied 22.8 GB of 630.5 GB, 782749 of 2357620 items
12/16/11 11:25:15.335 PM com.apple.backupd: Copied 86.6 GB of 630.5 GB, 1167675 of 2357620 items
12/17/11 12:25:16.227 AM com.apple.backupd: Copied 152.2 GB of 630.5 GB, 1393795 of 2357620 items
Dec 17 01:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 305.2 GB of 630.5 GB, 1413946 of 2357620 items
Dec 17 02:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 457.1 GB of 630.5 GB, 1419190 of 2357620 items
Dec 17 03:19:07 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 1736865 files (568.3 GB) from volume Macintosh HD.
Dec 17 03:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 572.1 GB of 630.5 GB, 1848939 of 2357620 items
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Indexing a file failed. Returned 200 for: /Volumes/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane, /Volumes/3 TB GoFlex Drive/Backups.backupdb/Tom iMac/2011-12-14-171406.inProgress/7DB524DD-EFB9-42A6-8A21-0A2A312EDA6D/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Aborting backup because indexing a file failed.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Stopping backup.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 2164998 files (581.1 GB) from volume Mac OS Lion GM.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copy stage failed with error:11
Dec 17 03:40:50 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Backup failed with error: 11
This time it was the Mouse.prefPane that caused the error. I'd like to exclude the entire PreferencePanes directory.
This was my error message this time:
I just realized this was on my small Developers partition. Perhaps there is an error with the build, OR an error with the initial restore. I'd like to perhaps exclude the entire /Volumes/Mac OS Lion GM. I expect that Time Machine is working fine with my main partition and the error happens when it's almost done with the Mac OS Lion GM partition.
The problem now is that I only have 265 GB of 3 TB available on my Time Machine HDD. If attempt another backup, it'll surely erase about 410 GB of my past saved backups. I've already lost 6 months, and I only have two months left of backups. I need to erase the ".inProgress" package again. That'll take time, and it's impossible to do from this main partition, even at root access. This ".inProgress" has a total of two (nearly) full backups; it didn't cleanup the first full backup attempt while starting the second,perhaps it would have had it finished. But I fear even if I exclude the whole "Mac OS Lion GM" partition, It'll create a third full backup before cleanup and erase ~400 GB of previous good backups. Then, I'll have a total of 4 (nearly) full backups! 3 TB is just enough without any past backups.
Maybe I'll just copy my documentations of my 'errasing the ".inProgress" package' last time (from the Mac OS Lion GM partition) and do a full restore of just that partition. Thus erasing the errors all together. If it doesn't fix the errors then this could be a bug in the build that doesn't allow Time Machine to work. I've always included this partition in Time Machine before, even with other Lion builds, so I suspect that it was an error in the initial restore. (I may be answering my own questions, and that the inital restore (of the small partition) is the problem, and I just need to re-restore the small partition)
Again, I'm going to have to erase the ".inProgress" file to regain 1.53 TB of space before proceeding.
Also, I gave myself permission to read the ".Backup.345781513.887697.log", the log that was created last night when I first started Time Machine this last time. It was interesting, but didn't show the error I could see from the console.
Right now, mds and mdworker appear to be going crazy even after I just now turned off Time Machine. I think I'll let it go for the rest of the night. Then I'll work on erasing the ".inProgress" package from the other partition boot up.
That was my entire last post. To add some information, I have two OS X partitons, both Mac OS X Lion. One is my large main partition, the other is one I don't mind testing with. I recently replaced my internal hard drive in my iMac and restored from Time Machine both partitions. This appeared to go smoothly. But I have yet to create a single successful Time Machine backup since. At first it was doing a Full Backup, which I didn't like, but now it just aborts around 95% completion. Each, time, it tries it fills the Time Machine hard drive with duplicate (nearly) full backups errasing my older good backups. I would like to erase the ".inProgress" file to save space.
My main question in this new discussion is does anyone know of a good way of erasing the ".inProgress" file? This is so I can preseerve my previous backups. ACLs and other permissions seem to make it impossible to erase from this startup partition, the one I'm running Time Machine from. Even at root level, if I give myself permission to change permissions or delete a file, it'll say Operation not Permitted instead of Permission Denied. I have been able to delete this ".inProgress" package before when booting from the other partition, but with great difficulty. I have had much help from another Member in this Support Community when it comes to solving my Time Machine problems. I think I have found the problem (indexing files in my small OS X partition), as stated in my copy& pasted post above, but I really need to delete this inProgress package first to save space before continuing!Pondini wrote:
Gator TPK wrote:
Now I'll have to fix the small partition? How's the best way to do this? There could be thousands of files that won't index fine.
See if there's anything you haven't done, that applies, in the pink box of #C3 in Time Machine - Troubleshooting
Otherwise, since most (or all?) of the indexing errors are in OSX, you might want to just reinstall it. Something may have gone wrong sometime, that damaged those files.
I reviewed #C3 in Time Machine - Troubleshooting and I have already done most of those things. I have just learned something new though:
When I included my Main OS X partition again, I got an indexing error for the first time for that partition. I might be interesting to note that the _spotlight process was running, and it's running again (the magnifying glass has a dot and it generically says "Indexing Tom's iMac"). mdworker, mds and backupd processes really are working hard, one moment they used over 500% of my CPU. It's nice to know for once quad core is good for something other than video encoding. (Now if they could just get the Finder to do more than 100.1%, only 1 thread is doing 100%, I'd like to see file size calculations 8 times quicker!)
I never got an indexing error once in the past 2 weeks for that large Mac OS X v10.7.2 main volume, and it had appeared to finish that partition backup before running into problems with my smaller test partition. Also, I had just updated the smaller test partition with a later build of Mac OS X. But It appears that the beta builds are clearly not the problem. I thought I could just restore again (from the December 4th backup) the small partition and both would be fine.
I'll finish reviewing all the suggestions on Time Machine - Troubleshooting and go from there. Hopefully, the _spotlight indexing simutaniously was the only problem. It's strange that the indexing hasn't happened since the original restore last week untill I finally got a good clean complete partial Time Machine backup. Why would the first Time Machine backup trigger indexing again?
For now, I'm going to exclude the Main Partition again, and let another good backup run. And try your suggestions. (And wait till mds, mdworker, etc. to finish!)
I have the logs of the first two sucsessful backups and the last two failed backups from the last 3 hours, if that would help.? -
unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"
Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hi,
i have the following message when i tried to install LR 5.6
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe Photoshop Lightroom 5.pkg_5.6 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
how can i solve this issue?
I am running on Mac with OSX 10.9.4
thanks in advance
Olivierolebreth wrote:
how can i solve this issue?
A search of the site would probably be a good start:
https://forums.adobe.com/search.jspa?q=dw006 -
Hi All, anyone with this problem with Acrobat Pro XI, IM USING MAC, also Yosemite if that helps.
Also Adobe CC, BASICALLY IT just quit and i had to uninstall, re install, and I get this
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1
Anyone with same issues...Same problem. Creative Cloud subscriber running Mac 10.10.2 on iMac (Retina 5K, 27-inch, Late 2014). All apps work fine EXCEPT for Adobe Acrobat XI. I have tried 100 times and 100 solutions. NOTHING works.
-
Use of DBMS_REDEFINITION Package with Goldengate
All,
I am currently using OGG 11.2.1.0.4 in an active-passive configuration and have an opportunity where I need to re-partition a table due to performance reasons. Given my up-time requirements, using the DBMS_REDEFINITION package seems to be a really good option. I am concerned as to how this would work with Goldengate. I do not currently use DDL replication with this extract/pump/replicat, but would this be the way to use this package and do the REDEFINITION simultaneously on both sides? Is there a better way?
I haven't found anything online pertaining to the use of this package and Goldengate so I am hoping this forum can help out.
Thanks!From the 11.2 admin guide:
Create an empty interim table (in the same schema as the table to be redefined) with all of the desired logical and physical attributes. If columns are to be dropped, do not include them in the definition of the interim table. If a column is to be added, then add the column definition to the interim table. If a column is to be modified, create it in the interim table with the properties that you want.The table being redefined remains available for queries and DML during the entire process.
Execute the FINISH_REDEF_TABLE procedure to complete the redefinition of the table. During this procedure, the original table is locked in exclusive mode for a very short time, independent of the amount of data in the original table. However, FINISH_REDEF_TABLE will wait for all pending DML to commit before completing the redefinition.>
If you did not want to create an interim table, then this approach is not going to work for you. There is no requirement for you to create anything other than the interim table, and any dependent objects can be done automatically, including materialized views. Where did you see that you have to create mview logs?
Maybe you are looking for
-
How to make stock zero after asset consumption?
Dear all,My scernio is that our business process is cwip all the material is posted either in asset or cost center no inventory is maintained.But for one material user forgot to give account category but in backhand my fico consultant consumped that
-
How do I get project downloaded to 2nd user's PC?
I'm testing RH6 with RoboSource Control 3. Was able to covert existing project and get it up onto server as single user. Checking in out as single user is fine. Now, I want to test how it works with 2nd user. When 2nd user tries to get project off th
-
Transfer Case Animation Question Regarding if Logic.
I am using the following code in a transfer case animation and for the life of me, I can't figure out what I'm doing wrong. The "if (neutralSequence ==0)" part works great, but the "}else if (neutralSequence == 14){" part doesn't. I am using traces
-
I see this every 10 seconds in the system log ... any ideas how to shut it off? Sep 29 15:45:37 brian-mac-pro com.apple.launchd.peruser.501131 (tv.boxee.helper2791): posix_spawn("/Applications/Boxee.app/Contents/Resources/Boxee/bin/boxeeservice" , ..
-
It a couple of days that I noted the connection to server. Unfortunately this is something I do not remember I connect. So I wuld ask you support in inderstanding if this is normal and if I can cancel these connection (if not required) and how to do