Error with define substitution variable in SQL

Hi there,
I am using PL/SQL developer and trying to define a substitution variable as follows:
define freq = 'Weekly'
Then later on, in my SQL statement, I used this variable in WHERE statement as follows:
WHERE ... (&freq = 'Weekly') and ...
But I got the "ORA-00904: "WEEKLY": invalid identifier" error.
Where is the problem?
Thanks in advance!

I don't know about PL/SQL developer but in sqlplus you need single quotes around the variable.
SQL> define freq = 'Weekly'
SQL> select null from dual
2 where &freq = 'Weekly';
old   2: where &freq = 'Weekly'
new   2: where Weekly = 'Weekly'
where Weekly = 'Weekly'
ERROR at line 2:
ORA-00904: "WEEKLY": invalid identifier
SQL> edi
Wrote file afiedt.sql
1 select null from dual
2* where '&freq' = 'Weekly'
SQL> /
old   2: where '&freq' = 'Weekly'
new   2: where 'Weekly' = 'Weekly'
N
SQL>

Similar Messages

Error with clob column: "No pl/sql translation for the blind type given for this bind variable"

This is reports 11g
I've got a clob column. Reports seems to recognize its type, but if I try to reference it in a format trigger, I get this error at compile time:
"No pl/sql translation for the blind type given for this bind variable"

Actually, Reports is in something better than Forms.
Neither Forms nor Reports do not have "complete" SQL engine (both have only "complete" PL/SQL engine), but have their own SQL parser, which does not understand SQL commands after the database 8.0.
But, in Reports Data Model - SQL Query Statement, we can write "modern" SQL statement (> database 8.0), because Reports sent it directly to the database, without using their own SQL parser.
For example, in Reports Data Model - SQL Query Statement, we can write this (scalar subquery expressions, in bold):
select empno,
       ename,
       deptno,
       (select dname from dept where deptno = emp.deptno) dname
from emp
order by empno;
although scalar subquery expressions was introduced in the database 9.0.1, and in databases 8.0 and 8.1 we should write someting like this:
select emp.empno,
       emp.ename,
       emp.deptno,
       dept.dname
from emp,
       dept
where dept.deptno = emp.deptno
order by empno;
Regards,
Zlatko

Substitution variable in sql load rules file

Okay gurus,
I need a little guidance, I have to replace the value of 201020 and 2008 from substitution variables. I have created the variables and set them up globally on the essbase server.
201020 = FW00
2008 = FY00
WHERE ACT.FISCAL_WEEK_ID <= 201020
AND ACT.FISCAL_YEAR_ID > 2008
AND RTDIV.DIV IN (1,2,3,4,5,6,7,8,9,99) (This is the query with hard coded values of week and year)
When i m trying to put sub variables there , its throwing the error. please find below the way i was trying to do it.
WHERE ACT.FISCAL_WEEK_ID = '&FW00'
AND ACT.FISCAL_YEAR_ID = '&FY00'
But unfortunately, its throwing error Error: 1021001 Failed to Establish Connection With SQL Database Server. See log for more information
I know that this is the generic error because if i put the hard coded value in sql load rules it works fine.
Is it the right way to out sub var in sql load rules???
Please advice and thanks in advance.

Hi Genn,
I tried to see the app log for sql but i m afraid that there is nothing in there, the only error message which I am getting in app log is this:
Failed to Establish Connection With SQL Database Server. See log for more information
Its an ASO cube and initially i was using the variable as FY00 AS "2008" it did not work and than i tried without quotes in variable but is still not working.
Any idea..thanks in advance.

Using substitution variable in sql -- Issue

Hello All
I am trying to do a sql operation from command prompt of my system and that sql requires substitution variable which i am passing it but when i pass the variable ( there are two) the first one assign as " \c" and second gets both what i am passing.
I am not sure what exactly happening here, i have done this on AIX but here its not working any ideas?
System : uname -a
Linux ## 2.6.18-128.1.1.el5 #1 SMP Mon Jan 26 13:58:24 EST 2009 x86_64 x86_64 x86_64 GNU/Linux

AIX and Linux are not the same. An output of "\c" may indicate a compatibility issue of your shell script with your current command line interpreter (shell). A \c can be used to suppress a newline with the echo command. Bash understands both formats echo -n and echo \c, but other shells like Ksh don't. Try to run your script under a Bash, which is the default under Linux. If the problem persists you will need to post your script for any further analysis.

Problem with my substitution variable.

My substitution variables don't prompt properly now. It worked fine before, but I don't know what I did to it. Here is the test code:
set define on;
connect sys/&sysPassword @&instanceName as sysdba;
execute dbms_output.put_line('this is a test');
When I tried to execute above lines in sqlplus, it didn't prompt anything, but got following result instead:
SQL> set define on;
SQL> connect sys/&sysPassword@&instanceName as sysdba;
Enter value for syspassword: execute dbms_output.put_line('this is a test');
Enter value for instancename:
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_string>] | /
SQL>
I remember when I used substitution variables before in sqlplus worksheet, it popup a dialog for input, but it doesn't anymore.
Any ideas about this issue? Or what setting could affect the behavior? Thanks in advance.

It would work only if you put these set of statements in a .SQL file and run that file at SQL*Plus prompt:
SQL> @the_sql_script_created_above.SQL

Error with JAVA_HOME enviro variable

I'm running win2k Pro. I installed first j2sdk1.4.1 and then tomcat 4.1.12 on my e:\. When I click START TOMCAT i recieve the error in a dialog box:
Cannot find the file '-Djava.endorsed.dirs='(or one of its components). Make sure the path and filename are correct and that all required libraries are available
Also in the command prompt it describes the error as:
The JAVA_HOME environment variable is not defined
This environment variable is need to run this program
Using CATALINA_BASE: ..
Using CATALINA_HOME: ..
Using CATALINA_TMPDIR: ..\temp
Using JAVA_HOME:
I've set my environment variables as the following
JAVA_HOME - e:\j2sdk1.4.1
CATALINA_HOME - e:\Tomcat
CLASSPATH - e:\Tomcat\common\lib\servlet.jar
PATH - c:\WINNT;c:\WINNT\SYSTEM32\cmd;e:\j2sdk1.4.1

I have exactly the same problem with the environment variables.
I am running Win Me;
I have all the environment variables set in AUTOEXEC.BAT, including the PATH ; but after many tests I am convinced that autoexec.bat is not being run at all;
I tried adding an auto batch command file to be run every time a dos box was opened but while that runs ok it still leaves the problem outstanding;
ie startup wont run through, claiming that the environment variables are not set:
This is what I have set in autoexec.bat
set PATH=C:\Java\j2sdk1.4.1_02\bin;C:\orawin95\bin;C:\WINDOWS;C:\WINDOWS\COMMAND
SET JAVA_HOME="C:\Java"
SET CATALINA_HOME="C:\Tomcat\jakarta-tomcat-4.1.24"
ANy help/advice appreciated

Error when defining a variable other than CHAR

I am getting a syntax error when I define variables :
data: l_arbei type p.
constants: l_delim type x value '09'.
Message L_ARBEI must be a character-type field (data type C, N, D or T). an open control structure introduced by "INTERFACE"
Has anyone else experienced this problem. Why can I not define these variables.

data: l_arbei type p decimals 1,
      l_ismnw type p decimals 1.
write w_ops-work_activity to l_arbei.
l_arbei = l_arbei - l_ismnw.
if l_arbei gt 0.
    write l_arbei to w_ops-work_activity.
endif.
As mentioned same error message when defining the following:
constants: c_delim type x value '09'.
     split i_input1-line at c_delim into
           w_hdr-orderid
           w_hdr-order_type.
I agree that there should be no problem with the definitions. However cannot understand why it does not like it. Thought there might be an additional requirement for Unicode systems.

Essbase server - automatic change of substitution variable from SQL

Hi,I would like to automaticaly change the substitution variable in Essbase Server. Is it posible to change the substitition variable from external source e.g. SQL statement?Simple sample:I would like to assign value "2003" to "CurYear" substitution variable. But value "2003" I would like to get from SQL:"select year(current date) from table".There are commands in Esscmd and MaxL Shell, see bellow.Esscmd command:CREATEVARIABLE "CurYear" "localhost" "" "" "2003";MaxL Shell:alter system set variable CurYear '2003';Is it possible to get the value '2003' from SQL and pass this value to Esscmd command or MaxL Shell?My system:Windows 2000 Professional Service pack 4Essbase at 6.5.3 levelThanks,Grofaty

You can create a text file from the SQL server that writes the command like"CREATEVARIABLE "CurrYear" "Servername" "AppName" "DBName" "2005";then you can create a schedule job that would run this script which can update the variable. CREATEVARIABLE creates/replaces the current variable.

Substitution variables in Sql*Plus

Hi all,
How to make Sql*Plus ask for the substitution variable value one time only for a substitution variable even if it appears multiple times inside a query ? Because so far each time I launched the query below then I have been asked two times by Sql*Plus for the variable value. For example : select ref_site from t_comsis where longitude_lamb + latitude_lamb < &distance + power(&distance,2).
Thanks

of course accept is more friendly, you can check for valid number, you can have a prompt or a hidden input.
you can also undef your variable if you prefer the && solution
SQL> select &&x+&&x from dual;
Enter value for x: 1
old   1: select &&x+&&x from dual
new   1: select 1+1 from dual
       1+1
         2
SQL> undef x
SQL> r
1* select &&x+&&x from dual
Enter value for x: 2
old   1: select &&x+&&x from dual
new   1: select 2+2 from dual
       2+2
         4

Error when defining a variable from a class

Hi,
I'm getting this error message when trying to define a
variable from a class:
'1086: Syntax error: expecting semicolon before left paren.'
I can't see where the error is.
The scripts Question.as and Codeframe.as is located int the
folder Mycomponents under the project.
Regards
/Acke
**** Main app *****
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.CloseEvent;
import myComponents.*;
var Question():myComponents.Question=new Question(); // !!
This line causes the error !!
other code goes here....
]]>
</mx:Script>
**** The class definition ******
package myComponents
//import other classes needed
import Mycomponents.Codeframe
public class Question {
// Define properties and methods.
// Define public vars.
public var Qtype:string;
public var Condition:string;
public var Qnumber:string;
public var Qheading:string;
public var Pretext:string;
public var Qtext:string;
public var Posttext:string;
public var Codeframe():string;
public var Reserved:string;
public var EditableFrom:string;
public var EditableTo:string;
public var Decimal:string;
public var SetQfactor:string;
public var Logic_if():string;
public var Logic_then():string;
// Public constructor.
//public function Question(){
// do stuff to set initial values for properties
public function Question(Type:string,
Condition:string,
Qnumber:string,
Qheading:string,
Pretext:string,
Qtext:string,
Posttext:string,
Codeframe():string,
Reserved:string,
EditableFrom:string,
EditableTo:string,
Decimal:string,
SetQfactor:string,
Logic_if():string,
Logic_then():string,
):Void
this.Type=Type;
this.Condition=Condition;
this.Qnumber=Qnumber;
this.Qheading=Qheading;
this.Pretext=Pretext;
this.Qtext=Qtext;
this.Posttext=Posttext;
this.Codeframe()=Codeframe();
this.Reserved=Reserved;
this.EditableFrom=EditableFrom;
this.EditableTo=EditableTo;
this.Decimal=Decimal;
this.SetQfactor=SetQfactor;
this.Logic_if()=Logic_if();
this.Logic_then()=Logic_then();
}

1.
It should be
var theQuestion:Question = new
Question(sType,sCondition:string,sQnumber,sQheading,sPretext,sQtext,sPosttext,
sCodeframe,sReserved,sEditableFrom,sEditableTo,sDecimal,sSetQfactor,sLogic_if,sLogic_then )
As you don't have default values in the constructor - you
should specify the parameters.
2. why do use type "string" ? It should be "String" if you
refer to a standard type
3. What are you trying to say by this:
public var Codeframe():string;
public var Logic_if():string;
public var Logic_then():string;
There should not be any parenthesis in the variable
declaration.
4.
this is wrong
var Question():Question=new Question();
this even wronger
var Question():Array=new Question(); // I'm trying to create
an array here anyway...could this be the problem??
no parenthesis!
var Qs():Question=new Question();
hmmmm....
.var Qs()=new Question();
I think you should start reading from the following link to
get more understanding of the variables, types & declarations:
http://livedocs.adobe.com/flex/2/docs/wwhelp/wwhimpl/common/html/wwhelp.htm?context=LiveDo cs_Parts&file=00001863.html
Cheers,
Dmitri.

Error with the Shared Variable Engine

Hi,
I have a problem with the Shared Variable Engine,
A .doc File is attached to this message, decribing the problem with pictures.
I will be glad if anyone can help me.
Sincerely yours
Amitai Abramson
Attachments:
Question.doc ‏819 KB

Hi Amitai,
Good afternoon and I hope your well.
A member of the team from NI Israel contacted me regarding this post.
I want to provide you with extra details on how to resolve your issue - i.e. Repair (Or Re-install) the Shared Variable Engine.
If you use the MsiBlast Tool it will populate a list of all MSI NI Installers. One of these will be NI Variable Engine. On the right-hand side you can the click 'Repair'. I would also Repair the engine support for the versions of LabVIEW you have installed. Please see attachments for MsiBlast and a screenshoot of the MSIBlast screen.
If this doesn't work I would recommend re-installing LabVIEW using the following guide, which I posted on this forum. (second post by me).
Please let me know how you get on,
Kind Regards,
James.
Message Edited by Hillman on 12-03-2008 12:19 PM
Message Edited by Hillman on 12-03-2008 12:19 PM
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!
Attachments:
Repair Shared Variable Engine.JPG ‏97 KB
msiBlast.zip ‏110 KB

Got an error while creating bind variables using sql database.

iam going to use sql database for ADF-BC .
i created the bind variable and apply the bind position for the corresponding variable in the view object editor.when i click test it shows me "query is valid". when i tried to run that it gives me two errors.
1) sql error during statement preparation.(ie) select empid ,empname......from the emptable where empid like :'emp' and
2) [Microsoft][SQl server 2000 driver for jDBC] invalid parameter bindings
i need help to know the solution for this...(or) is there any other way to create bind variable ......

The 3 binding styles supported by JDev:
Oracle Named - ie. SELECT xxxx FROM xxxx WHERE emp_id = :vEmp (note colon and variable name)
Oracle Positional - ie SELECT xxxx FROM xxxx WHERE emp_id = :1 (note colon)
JDBC Positional - ie SELECT xxxx FROM xxxx WHERE emp_id = ?
Literally this query is sent to the database to execute, then the bind variables values are applied as a separate database operation. If SQL Server doesn't suport any of these binding styles, it's not going to work. As Chris Noonan suggests, try the JDBC Positional style though as you're using a JDBC driver to connect to SQL Server and it should support that style (the others are Oracle styles), and make sure you've switched the binding style on the VO query page to "JDBC Positional" too.
You must also on the VO bind variable page define your bind variables.
Also read the 10.1.3 JDev guide on ADF Business Components and View Object bind variables.
CM.

Error With Customer Exit Variable

Hi,
I need To Create Customer Exit For Text Variable based on Two Input Variable values.
can any one correct my code Code is written below based on quarter and Fiscalyearvarient.
I have to get calmonth Text value.
I am getting the error as : "I_T_VAR_RANGE" is a table without a header line and therefore has no
Component Called "0PERIV".
DATA : l_s_range TYPE rsr_s_rangesid,
        loc_var_range LIKE rrrangeexit.
IF i_step = 2.
CASE i_vnam.
   WHEN 'ZTXT_CML' .
      CLEAR: l_s_range.
      LOOP AT i_t_var_range INTO L_S_VNAM WHERE vnam = 'ZQUAR' AND vnam = '0periv'.
        IF i_t_Var_range-0PERIV = 'IE'.
          IF i_t_var_range-ZQUAR = '1'.
            l_s_range-low = 'APRIL'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '2'.
            l_s_range-low = 'JULY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '3'.
            l_s_range-low = 'OCTOBER'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '4'.
            l_s_range-low = 'JANUARY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ENDIF.
        ELSEIF i_t_var_range-0PERIV = 'K4'.
          IF i_t_var_range-ZQUAR = '1'.
            l_s_range-low = 'JANUARY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '2'.
            l_s_range-low = 'APRIL'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '3'.
            l_s_range-low = 'JULY'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ELSEIF i_t_var_range-ZQUAR = '4'.
            l_s_range-low = 'OCTOBER'.
            l_s_range-sign = 'I'.
            l_s_range-opt = 'EQ'.
          ENDIF.
        ENDIF.
          APPEND l_s_range TO e_t_range.
      ENDLOOP.
ENDCASE.
ENDIF.

Hi Supraja,
You would have to declare I_T_VAR_RANGE internal table as the table with an header line.
This you will find in data declaration segment.
ie
DATA : I_T_VAR_RANGE type <table name> WITH HEADER LINE.
or
Create a work area like l_s_var_range.
Use work area while performing operations in your code and later append the record to the table i_t_var_range.
DATA : L_S_VAR_RANGE type i_t_var_range.
Also, i_step = 3 is the right one, because you are processing the customer exit based on the values of the user input of two variables.
Modified code below.
DATA : l_s_range TYPE rsr_s_rangesid.
DATA : L_S_VAR_RANGE type i_t_var_range,
loc_var_range LIKE rrrangeexit.
IF i_step = 3.
CASE i_vnam.
WHEN 'ZTXT_CML' .
CLEAR: l_s_range.
LOOP AT i_t_var_range INTO l_s_var_range WHERE vnam = 'ZQUAR' AND vnam = '0periv'.
IF l svar_range -0PERIV = 'IE'.
IF l_s_var_range -ZQUAR = '1'.
l_s_range-low = 'APRIL'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '2'.
l_s_range-low = 'JULY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '3'.
l_s_range-low = 'OCTOBER'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIFl_s_var_range -ZQUAR = '4'.
l_s_range-low = 'JANUARY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ENDIF.
ELSEIFl_s_var_range -0PERIV = 'K4'.
IF i_t_var_range-ZQUAR = '1'.
l_s_range-low = 'JANUARY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '2'.
l_s_range-low = 'APRIL'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '3'.
l_s_range-low = 'JULY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ELSEIF l_s_var_range -ZQUAR = '4'.
l_s_range-low = 'OCTOBER'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
ENDIF.
ENDIF.
APPEND l_s_range TO e_t_range.
ENDLOOP.
ENDCASE.
ENDIF.
Hope it helps,
Best regards,
Sunmit.

Error with DB instance installation on SQL Cluster environment

Dear Experts,
We have an issue with UAT installation of ECC 6.0 on the following environment
MSSQL :
Microsoft SQL Server Management Studio                              10.0.4064.0
Microsoft Analysis Services Client Tools                              10.0.4064.0
Microsoft Data Access Components (MDAC)                              6.1.7601.17514
Microsoft MSXML                              3.0 6.0
Microsoft Internet Explorer                              8.0.7601.17514
Microsoft .NET Framework                              2.0.50727.5446
Operating System                              6.1.7601
OS :
Microsoft Windows 2008 SR2
While running the DB instance installation with Distributed setup, we are facing the following issue during the step "Grant database access for account usm" . SAPINST is run from the central instance to install the DB instance on a separate server. (Both the servers are on the same domain). The IDs SIDADM, SAPServiceSID exists in the DB with sysadmin permissions.
SAPINST logs is as follows
INFO 2011-11-28 20:24:52.263
Creating file C:Program Filessapinst_instdirx.
INFO 2011-11-28 20:24:52.263
Removing file C:Program Filessapinst_instdirx.
INFO 2011-11-28 20:25:08.169
Creating file C:Program Filessapinst_instdirERPEhP4AS-ABAPMSSDISTRIBUTEDDBx.
INFO 2011-11-28 20:25:08.169
Removing file C:Program Filessapinst_instdirERPEhP4AS-ABAPMSSDISTRIBUTEDDBx.
INFO 2011-11-28 20:25:11.326
Creating file C:Program Filessapinst_instdirx.
INFO 2011-11-28 20:25:11.326
Removing file C:Program Filessapinst_instdirx.
INFO 2011-11-28 20:25:12.201
Copied file 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.xml' to 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.45.xml'.
INFO 2011-11-28 20:25:12.576
Copied file 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.xml' to 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.46.xml'.
WARNING 2011-11-28 20:25:14.138
Unable to get information about path
LABEL.ASC using GetVolumeInformation. Operating system error message: The specified path is invalid.
WARNING 2011-11-28 20:25:14.935
Host name has been overridden. Using host name 'eccuatad1' which might not be the real host name.
INFO 2011-11-28 20:25:14.935
Copied file 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/inifile.15.xml'.
INFO 2011-11-28 20:25:15.44
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
INFO 2011-11-28 20:25:20.513
Copied file 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/keydb.15.xml'.
INFO 2011-11-28 20:25:20.607
Copied file 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.xml' to 'C:/Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/DISTRIBUTED/DB/statistic.47.xml'.
INFO 2011-11-28 20:25:20.638
Execute step doGrantServiceRights of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0
ERROR 2011-11-28 20:25:20.857
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'SyWinGetSecurityDescriptor' function, line (1296), with parameter (Error in getting security descriptor for 'MSSQL$U001' NT service).
ERROR 2011-11-28 20:25:20.873
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2011-11-28 20:25:20.873
FCO-00011 The step doGrantServiceRights with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssOsUser|ind|ind|ind|ind|11|0|doGrantServiceRights was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
Could you please let us know any resolution for this. Thank You

Vincent,
Thanks for the reply. Still I am not clear on how to use the STM tools in my scenario. I had issues with the domain installation with distributed in a cluster. Working with SAP and got a reply today saying that SAPINST will be modified.
Krishna

Error with SSIS package running as SQL Agent job

I have a strange issue.
I have a SQL Agent job that execute 5 steps, each step is an SSIS package that imports a CSV file to a temp table, then executes a SQL script to update a production table.
This job runs every 3 mins, every day, and has been for over a year.
Every once in a while it will start failing on step 2. Sometime it only happens for a couple of runs, other times I have to restart the SQL server. Once it corrects itself, it could be months before it happens again, but usually happens every
few weeks.
The error in the job history is: "Unable to bulk copy data. You may need to run this package as an administrator"
Obviously I have all the permissions correct, as it was running successfully every 3 mins before this error suddenly starts. I'm at a loss as to what the problem is. It is always on step 2, which is identical to step 1 except its a different CSV file
going to a different table. As I typed this, it failed twice, then was successful afterwards.
Any ideas where to look for further information? I've checked the event viewer and looked in the SQL logs, nothing stands out at this time.

Hi Kerberos35,
It seems to be caused by the UAC feature which makes SSIS use the low-permissions token of the administrator Windows account under which the job runs. This issue is described in the following KB article:
http://support.microsoft.com/kb/2216489/en-us
To resolve the issue, you can install the latest service pack for your SQL Server. To work around this issue, you can also use one of the following two methods:
Method 1: Replace the SQL Server Destination components in the Data Flow Tasks that are failing with OLE DB Destination components that point to the same SQL Server connection manager.
Method 2: Create a SQL Server Agent proxy by using a Windows account that is not a member of the local Administrators group after you assign Create Global Objects permissions to that account.
To do this, follow these steps:
Click Start, point to Administrative Tools, and then click Local Security Policy.
Expand Local Policies, and then click User Rights Assignment.
In the details pane, double-click Create global objects.
In the Local Security Policy Setting dialog box, click Add.
In the Select Users or Group dialog box, click the user accounts that you want to add, click Add, and then click OK two times.
Regards,
Mike Yin
TechNet Community Support

Error with define substitution variable in SQL

Similar Messages

Maybe you are looking for