Error with multiple includes
hi there. i've read a lot of posts on this, but none seems to answer this question:
i'm trying to use 2 includes on one page and am getting this error:
"500 charsetName" - according to a book i've got, it should work. any ideas??? thanks!
my code is:
<%@ include file="header.chtml"%>
<%@ page language="java" contentType="text/html" %>
<%@ page import="java.sql.*,javax.sql.*,javax.naming.*,java.util.*"%>
<%
String ID = null;
ID = request.getParameter("ID");
out.print("<BR>Main Menu: "+ID);
%>
<%@ include file="footer.chtml"%>
hi,
try putting the page directives at the top of the jsp page.
like
<%@ page language="java" contentType="text/html" %>
<%@ page import="java.sql.*,javax.sql.*,javax.naming.*,java.util.*"%>
<%@ include file="header.chtml"%>
i don't find any other problem with your jsp.
thanks
shrikant
Similar Messages
-
Error with multiple accessors in 10.1.2.1
I've an Entity say A wich has assiociations to 2 entities say B and C.
When I create a VO including both B and C and I try to reference also A I can choose both associations (good) but the query it creates uses allways the first one also if I chooes the second (wrong).
Is it a bug.
How can I solve that issue ?
Tks
TullioI don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex -
Error with multiple rendition assets
Im building af folio in 768x1024 rendered in PDF.
Trying to follow the guideline for Overlay Assets
A have a image sequence included where I have two folders, Overlay asset folder, and inside that a folder named HD, with the image sequence in double format.
It works fine :-)
But when i try with a zoomable picture, and in the links folder place a HD folder with the zoomable photo in double format. It dosen't work.
And also I get this error message
And of course I have checked that the size is double,
No matter if I link the placed photo to the HD or the SD photo (by the way, which is the right?) i get this message!
Can anyone help me out on this?I have found detected one error, eventhough the image had the double size 500 px width instead of 250 px, the resolution was also double. So I set both to 72 ppi.
Now I don't get the error. But the HD photo is also showing up on the old iPad, it seems like im forced to link to the highres from beginning!
Not logic when I compare with the image sequence!
Any brilliant answers? -
Hi,
I'm using JSC2_1. I've developed page with table bound to database table via data provider. There are about 1000 rows in database table so my table component has pagination buttons (about 100 pages).
My problem is that when user clicks pagination buttons quickly (before response is sent) then server fails with error 500. I think that multiple request threads are being launched and they all access CachedRowSet in the same time. According to http://blogs.sun.com/jfbrown/entry/cachedrowsetdataprovider_and_cachedrowset_info CachedRowSet is not thread safe.
Is there any way to block user from sending multiple requests? Another solution would be locking the rowset but I don't know how to do this.
regards
GrzegorzOK then I doubt Bios is the issue. I had to check though.
I run the same software as you do for that wheel however I have Windows 2k SP4. While I doubt the underlying OS is the issue I did ask as it may have been a Service Pack Issue. As you have a current version then I can only assume that is OK.
Which Via drivers are you using? If they are a Hyperion driver set from Via there are issues with some of their versions. Try updating with the Via 3in1's that came on the MB Driver CD you got with the board.
Otherwise this may be an issue best asked of Logitech as well as I have no idea what their error reporting is trying to tell us. No I am not saying it is the wheel. I am saying we may get a better handle by knowing what that error code is trying to say is all.
Oh ya. Make sure also in Bios that you turn on Legacy Devices. I have that on with mine as well. I did not try the wheel without it but it could be an issue although a remote one. It is something to make sure of though.
Also if your using an external USB hub try the wheel directly into the computer rather than through the hub.
Also if you have a memory card reader or other USB devices try the wheel with them unplugged just to make sure there are no conflicts.
I am off to sleep but let me know and I will try to help more tommorow if that doesn't help. -
Runtime Error with Multiple Applications running in one Ear.
I have the Coherence and Tangosol jar files loaded in my ear and the coherence-cache-config.xml in the classpath, if i add two web apps to this ear that use the same jars i get this error:
SRVE0026E: [Servlet Error]-[action]: java.lang.NoClassDefFoundError: com.tangosol.util.ConcurrentMap
but if i run the ear with either web app seperately - it works fine.
I know i have some kind of a configuration issue - i just don't know what.
Any help would be appreciated.
Thanks..Hi,
what application server do you use, and where do you have the coherence.jar and tangosol.jar?
Best regards,
Robert -
Error with multiple widgets on one page (Firefox only)
Hi
I have developed a website in iWeb 09 and have experienced errors when i put more than one widget on a page (second widget always errors out). To date i have just stuck to a limit of 1 per page - but now I want to have two widgets on my home page (google map and a facebook widget)
The page is www.bikesatbrighton.com.au and the two widgets are working in Safari and Explorer, but not in Firefox. I have checked that there are no overlapping frames / widgets etc but have not been able to fix the problem.
Any assistance would be greatly appreciated. Any other general comments about the webpage would also be welcomed.
Cheers
TravisWelcome to the Apple Discussions. Is it the page that you provided the link to or a second page. I see no problem with that first link in FireFox 3.6.12 and 4.0b7.
What are the widgets? The map and The Facebook thingy? Have you tried clearing the browser's cache and reloading the page?
OT -
ObjectModel.dll Error with multiple users: InDesign CS6
I have 3 users (myself included) who are having issues with InDesign CS6. We've had issues since upgrading/installing. I've done uninstall's, cleans, fresh downloads and installs, upgrades to the latest versions, and still we are having this issue. I have also done individual file replacements such as the identified ObjectModel.dll on faulty machines with (suspected) known good files from a new download.
Faulting application name: InDesign.exe, version: 8.0.0.370, time stamp: 0x4f72c3ee
Faulting module name: ObjectModel.dll, version: 8.0.0.370, time stamp: 0x4f72c3d4
Exception code: 0xc0000005
Fault offset: 0x0002cd16
Faulting process id: 0x1770
Faulting application start time: 0x01ce26490287a001
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\ObjectModel.dll
Report Id: 5a6d3609-923c-11e2-ba48-c8f7332601d7
Is there any more data that can be provided or will phone support be required?
I've even had the same (above) issue just opening InDesign CS6Completed download and installation of 8.0.1.406. InDesign opened normally but could not even open the file. Here is the event log:
Faulting application name: InDesign.exe, version: 8.0.1.406, time stamp: 0x50335e39
Faulting module name: DOCUMENT FRAMEWORK.RPLN, version: 8.0.0.370, time stamp: 0x4f72c565
Exception code: 0xc0000005
Fault offset: 0x0001b4db
Faulting process id: 0x10bc
Faulting application start time: 0x01ce2676af15693d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\DOCUMENT FRAMEWORK.RPLN
Report Id: 30da0a23-926a-11e2-ba48-c8f7332601d7
Restarted PC, InDesign crashed upon load.
Faulting application name: InDesign.exe, version: 8.0.1.406, time stamp: 0x50335e39
Faulting module name: ObjectModel.dll, version: 8.0.0.370, time stamp: 0x4f72c3d4
Exception code: 0xc0000005
Fault offset: 0x0002cd16
Faulting process id: 0x1730
Faulting application start time: 0x01ce2677b5479f73
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\ObjectModel.dll
Report Id: 40052559-926b-11e2-8c56-c8f7332601d7
Canceled recovery of file, opened InDesign, attempted to open file, InDesign crashed again:
Faulting application name: InDesign.exe, version: 8.0.1.406, time stamp: 0x50335e39
Faulting module name: DOCUMENT FRAMEWORK.RPLN, version: 8.0.0.370, time stamp: 0x4f72c565
Exception code: 0xc0000005
Fault offset: 0x0001b4db
Faulting process id: 0xb84
Faulting application start time: 0x01ce2678068109a1
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\DOCUMENT FRAMEWORK.RPLN
Report Id: 75a1f9b5-926b-11e2-8c56-c8f7332601d7 -
Handling error with multiple row insert/update
Hi,
I need to insert multiple rows into a table, and I understand that i need to use executeArrayUpdate().
My problem is this :
1. How do I know in case some of the rows in the array failed during the INSERT?
2. When I do know that, how do I find those particular rows?
ThanksODAFEONIHOWO wrote:
Please i need help on how to enter multiple row into mysql with one insert
statement and jsp it's not possible - you'll need to do a batch insert
i have been trying this for weeks without sucess e.g how much experience do you have with Java? -
Syntax error in standard include RKEB090F in ECC6
Hi,
I have one issue with this include program RKEB090F. This program is being used in one of the custom program while checking this program we are getting syntax error field P_USEDB is unknown.
When I compared 4.7 and ECC 6 version, the code contains in 4.7 version is
FORM INITIALIZATION_EXIT *
FORM INITIALIZATION_EXIT.
ENDFORM.
but in ECC 6 the code contains
FORM INITIALIZATION_EXIT *
FORM INITIALIZATION_EXIT.
if rkb1d-smode = '7'.
CALL FUNCTION 'AS_DATASOURCE_INIT'
EXPORTING
I_REPORT = 'KE30'
I_REPORTTYPE = 'TR'
IMPORTING
E_USE_DATABASE = P_USEDB
E_USE_ARCHIVE = P_USEAR
E_USE_INFOSYS = P_USEAS
E_ARCHOBJ = P_OBJECT
ET_ARCH_SEL = SO_FILES[].
G_RKB2A-OBJECT = P_OBJECT.
G_RKB2A-USEDB = P_USEDB.
G_RKB2A-USEAR = P_USEAR.
G_RKB2A-USEAS = P_USEAS.
G_RKB2A-SO_FILES = SO_FILES[].
PERFORM HANDLE_DATASOURCE USING 'EX'.
endif.
ENDFORM.
due to this code I am getting the syntax errors. How can we know how this code is added.
Please let me know if you get any inputs.
Regards,
Jyothi CH.Hi Guys,
I am having the same syntax error with this include RKEB090F and the Field P_USERB, but instead the program is a SAP Program. I have been trying to archive a table and I keep getting this error for different G* programs. I regenerate one, the other one gives error. I tried regenerating all of them and I still got this error.
Error in the ABAP Application Program
The current ABAP program "SAPLKYP4_UC" had to be terminated because it h
come across a statement that unfortunately cannot be executed
The following syntax error occurred in program "GPC6ZZ9KJ35AEXCXNZFQDJG3
in include "RKEB090F " in
line 17:
"Field "P_USEDB" is unknown. It is neither in one of the specified tabl"
"es nor defined by a "DATA" statement. ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
PLEASE HELP
--Thanks in Advance,
Fiyaz -
Handshaking DMM with multiple Switch devices - DAQmx error
Hi.
I'm trying to create a handshaking loop with DMM (PXI-4071), SWITCH (PXI-2569) and MUX (PXI-2575). All three instruments are in segment 2 of PXI-1045 chassis (slots 8, 9 and 10) and I am using PXI trigger lanes to route triggers.
I followed the NI article 'Multi-module Scanning with National Instruments Switches' - I modified the NI SWITCH example 'niSwitchDMMSwitchHandshaking' to configure the other SWITCH but when I tried to run the example, I got an error:
0xbffa6b9a - No registered lines could be found between the device in the route. (pop-up screenshot is in the attachment). It is the niSwitch_InitiateScan function for the second Switch that returned the error.
Changing PIX trigger lanes has no effect.
I tried both CVI and LabVIEW examples with the same result.
I even tried to use two 2575 MUXes - same result.
Can anybody tell me what am I doing wrong?
Solved!
Go to Solution.
Attachments:
errror1.JPG 26 KBHi Pavel,
For the purposes of this post, I'll define
the measurement complete signal (sent by the DMM to the switch modules
after each measurement) as 'MC' and place it on TTL0.
For the
purposes of this post, I'll define the scan advanced signal (sent by the
switch module(s) to the DMM once the relays have settled) as 'SA' and place
it on TTL1.
You mentioned you're using NI-Switch, which is NI's IVI
compliant switch API. Since the IVI Foundation regulates the behavior
of IVI compliant software, we must adhere to their rules when
implementing our API. Unfortunately, the IVI switch standard doesn't
provide a method to control arbiting of triggers between multiple switch modules
simultaneously.
Let's
look at what happens when we setup a system with multiple switch
modules handshaking with a single DMM. The DMM is going to take a
measurement and then send MC on TTL0. Meanwhile, each switch is listening to TTL0,
waiting for the MC pulse. When the MC pulse is received, each switch sets
the relays according to its next scan list entry, waits for debounce,
and then sends SA on TTL1. The problem we run into here is that depending on the switch module, number of relays connected simultaneously, jitter, etc, it's possible that one module will send the SA trigger on TTL1 before the other. Since the IVI spec doesn't provide any way to implement a 'master' switch or an arbitor, it's impossible to implement a system such that only the last switch that settles sends a trigger. Therefore, what happens is we get a whole bunch of switch modules sending triggers at slightly different times onto TTL1. If one switch is driving TTL1 high while the others are driving TTL1 lo, it's remotely possible that we could damage the TTL circuitry on the PXI backplane.
To date, NI hasn't seen any failures due to simultaneously driving the TTL lines high and low at the same time with NI switch hardware, but it is theoretically possible that damage could occur. For this reason, NI implemented a change in DAQmx
9.0.0, 9.0.1, and
9.0.2 that prevents a user from setting up handshaking with multiple switch modules while using NI-Switch. What does DAQmx have to do with this, you might ask? A component installed with DAQmx is responsible for verifying the triggers are valid.
Customers with existing NI-Switch multi-module handshaking applications will find that upon upgrading to any of the above three versions of DAQmx, the error you observed will occur. We've evaluated this customer feedback and have decided to revert to the previous functionality in a yet-to-be released version of DAQmx. Please note that NI does not advise driving the same TTL line with multiple sources due to the chance that we'll double-drive the line. Therefore, it goes with out saying that NI does not advise using NI-Switch in multi-module handshaking applications. We do, however, still recommend NI-Switch for Syncrhonous triggering because the switches never send triggers (in synchronous mode, the DMM just waits a predefined amount of time before switching).
Note that if you use the DAQmx Switch API, we're no longer bound to the IVI spec, which means we have an arbitor that ensures only one switch module drives the SA trigger on TTL1. NI highly recommends that customers evaluate using the DAQmx switching API for multi-switch handshaking applications. An example DAQmx handshaking application for the DAQmx Switch API is located in Example Finder»Hardware Input and Output»DAQmx»Switches»Switch Scanning with DMM - Handshaking.vi.
Note that in DAQmx, we'll only have one scan list, regardless of the number of switches we have. Note that the syntax in DAQmx scanning is different than NI-Switch. I'll defer a detailed explanation of the differences to the DAQmx and NI-Switch Help (search for 'scan list'), but in short, we'll need to include the DAQmx Device name prior to each connection. For example, in NI-Switch, if we want to connect CH1 to Com1:
CH1->Com1;
In DAQmx, we'll need to include the Device name:
Dev1\CH1->Com1;
Note that to add additional switch modules in the DAQmx API, we simply
call the Set Topology and Reset VI multiple times:
DAQmx keeps the
session loaded in memory and as I noted above; we define which switch
does the action as part of the scan list entry.
If you'd still like to use NI-Switch, you could roll back to DAQmx 8.9.5 or previous, or if you want to stick with 9.0.x, I highly recommend that we daisy chain the triggers as follows:
DMM Measurement Complete to Advance Trigger on Switch1 via TTL0
Scan Advance from Switch1 to Advance Trigger on Switch2 via TTL1
Scan Advance from Switch2 to Trigger Source on DMM via TTL2
Note that we'll need an additional TTL line for each switch module. Also note that some switch modules allow front panel triggers, which reduces the number of TTL lines we'll need on the backplane, but which requires external wiring between switch modules.
Message Edited by Knights Who Say NI on 06-11-2010 05:25 PM
Message Edited by Knights Who Say NI on 06-11-2010 05:30 PM
Message Edited by Knights Who Say NI on 06-11-2010 05:30 PM
Message Edited by Knights Who Say NI on 06-11-2010 05:31 PM
-John Sullivan
Analog Engineer -
Error while posting Customer with Multiple sales areas using DEBMAS05.
Dear experts,
We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05. we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error: "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created! The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization). OSS Note (384462) provides further details about this. One Important point from the note is:
"As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
For your customers, contact persons exist to which a private address or a different business address is assigned.".
This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
If someone have experienced the same issue before and have found a solution to it, kindly help out.I have found the cause and solution to this problem.
This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
This was resolved by splitting the IDOC into 2.
The solution is to First post only the KNA1 segment and create the customer.
In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”: you would have got the KUNNR after the first step.
Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC.
I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
Cheers
Venkat -
How to register multiple xsd with relative include references?
Hi there,
unfortunately I'm a newbie to XDB and maybe this is a basic question. But I didn't get it solved right now (also Google wasn't my friend helping me out)...
I try to register a set of xsd to XML DB (11g Release 2 11.2.0.1.0) with the given structure:
Folder 'demo' contains:
mainmodel.xsd
types.xsd
Subfolder 'demo/details' contains:
submodel_a.xsd with <xs:include schemaLocation="../types.xsd"/>
submodel_b.xsd with <xs:include schemaLocation="submodel_a.xsd"/>
First I created the folders 'demo' and 'demo/details' in the XML DB repository using dbms_xdb.CreateFolder.
Then I added the xsd as resources to the XML DB, e.g.
declare
v_result boolean;
v_schema xmltype := xmltype(bfilename('DEMO', 'types.xsd'), nls_charset_id('ISO-8859-1'));
begin
v_result := dbms_xdb.CreateResource('/demo/types.xsd', v_schema);
end;
Then I registered my types.xsd:
begin
DBMS_XMLSCHEMA.REGISTERSCHEMA(
schemaurl => 'types.xsd',
schemadoc => BFILENAME ('DEMO','types.xsd'),
csid => 0
end;
When trying to register submodel_a.xsd the same way I get the following error:
ORA-31000: Ressource '../types.xsd' is not an XDB schema document.
How can I resolve this?
Best regards
MatthiasAs Marco mentioned, you have to resolve and update the relative urls in a local copy of the schema, just before registration.
That way you can keep the original file untouched while correctly register the schema using absolute urls.
Here's a short example, assuming all XSDs have been loaded as resources in the repository, using the same folder structure :
- This registers "types.xsd" at URL "/demo/types.xsd"
begin
dbms_xmlschema.registerSchema(
schemaURL => '/demo/types.xsd'
, schemaDoc => xdburitype('/demo/types.xsd')
, local => true
, genTypes => false
, genTables => false
end;
- This gets a local copy of "submodel_a.xsd" located at "/demo/details/submodel_a.xsd" in the repository, resolves and updates the include location(s), then registers it :
declare
v_schema_url varchar2(2000) := '/demo/details/submodel_a.xsd';
v_schema_doc xmltype := xdburitype(v_schema_url).getxml();
begin
for r in (
select x.*
from xmltable(
'for $i in fn:doc($url)/xs:schema/xs:include
return fn:resolve-uri($i/@schemaLocation, $url)'
passing v_schema_url as "url"
columns idx for ordinality
, schema_loc varchar2(4000) path '.'
) x
loop
select updatexml(
v_schema_doc
, '/xs:schema/xs:include[' || to_char(r.idx) || ']/@schemaLocation'
, r.schema_loc
, 'xmlns:xs="http://www.w3.org/2001/XMLSchema"'
into v_schema_doc
from dual;
end loop;
dbms_output.put_line(v_schema_doc.getclobval);
dbms_xmlschema.registerSchema(
schemaURL => v_schema_url
, schemaDoc => v_schema_doc
, local => true
, genTypes => false
, genTables => false
end;
(in this case the xs:include/@schemaLocation will be updated from '../types.xsd' to '/demo/types.xsd') -
Error Message with multiple line
Hi
How to display a error message with multiple line?
Example
Goods movement not possible for material 101
Goods movement not possible for material 102
Goods movement not possible for material 103
is it possible is ABAP? If so please advice me.
Best Regards
AsheekHi Anoop,
You can use same thing like this
I suggest write ur message through this.
First set the obecj.
CALL FUNCTION 'APPL_LOG_SET_OBJECT'
for local memory
FUNCTION 'APPL_LOG_WRITE_MESSAGES'
EXPORTING
OBJECT = OBJECT
SUBOBJECT = SUBOBJECT
UPDATE_OR_INSERT = UPDATE_INSERT_FLAG
TABLES
MESSAGES = MESSAGE_TABLE
EXCEPTIONS
OBJECT_NOT_FOUND = 1
SUBOBJECT_NOT_FOUND = 2
OTHERS = 3.
the call for physical memory
CALL FUNCTION 'APPL_LOG_WRITE_DB'
In this process you only need to provide the Itab with error messages.
Reg,
Arpit -
File to RFC with multiple records using BPM Scenario Error...!!!
Hello Guru's,
I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
Can any one tell me what mistake would i have done.
Thanks in advance.Hi,
There is one similar discussion I found,
FTP TO RFC using BPM
Thanks
Swarup -
PO Error in Process with Multiple account assignment
Hi ,
I am working with Extended Classsic scenario.
Problem is with PO with Multiple account assignement.
There is only one user who is getting problem with one particular account assignement "CCC" - Cost Center RP.. . When PO gets created with this particular AAC , it goes into "Error in process" only for one user.
In RZ20 it shows messsage as "Please enter quantity or percentage for account assignment" & "Distr. ind. and partial invoice ind. must be set f or multi acct. assgt.".
On other hand , other users are able to order the PO with the same AAC without any error.
What could be the reason behind this only for one user ?
Regards,
SheetalHi ,
I have checked it intially and both are identical.
Initialy the problem was, user had entered 128 times AA line items ( added & deleted ) in the PO while in the SC it was having only 64.... Our system accepts line items till 99 , so i asked him to delete the items above 99 ..
So after that POs error has gone and it went for approval..
But after approval it again went into error in process
Sheetal
Maybe you are looking for
-
I need to develop a plugin that search for some text into the document, then when I found a particular string I need to examine the page where the text is found, and I need to export all the page as TIFF and also exporting all text in a text file. I
-
The following code is from "Java 2 for Dummies": import java.sql.*; public class CreateTable public static void main(String args []) throws SQLException, ClassNotFoundException Connection connection; Statement statement; Class.forName ("sun
-
Settings or preferences not saved in 11.0.10
Adobe reader XI 11.0.10. the checkbox "restore last view settings when reopening documents" is unchecked in the settings > documents. If check it, to get teh reader opened the next time with the same options (without tools and signing...) and escpaci
-
Re:Item renderer AS3 for datagrid
I am having a data grid with multiple check boxes for this i am using CheckCellRendererEdit as itemrenderer.When i am making a change in datagrid checkbox its not updating The problems are 1. when i select a checkbox in second row it gets selected in
-
Layer markers seem to be placed late
It seems that in AE CS3, the layer markers you place live (during a preview) using the '*' key are placed about a second or so late from where they should be. Anyone else notice that? They worked fine in my previous version (AE7).