Error with multiple accessors in 10.1.2.1

I've an Entity say A wich has assiociations to 2 entities say B and C.
When I create a VO including both B and C and I try to reference also A I can choose both associations (good) but the query it creates uses allways the first one also if I chooes the second (wrong).
Is it a bug.
How can I solve that issue ?
Tks
Tullio

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

Similar Messages

Error with multiple requests

Hi,
I'm using JSC2_1. I've developed page with table bound to database table via data provider. There are about 1000 rows in database table so my table component has pagination buttons (about 100 pages).
My problem is that when user clicks pagination buttons quickly (before response is sent) then server fails with error 500. I think that multiple request threads are being launched and they all access CachedRowSet in the same time. According to http://blogs.sun.com/jfbrown/entry/cachedrowsetdataprovider_and_cachedrowset_info CachedRowSet is not thread safe.
Is there any way to block user from sending multiple requests? Another solution would be locking the rowset but I don't know how to do this.
regards
Grzegorz

OK then I doubt Bios is the issue. I had to check though.
I run the same software as you do for that wheel however I have Windows 2k SP4. While I doubt the underlying OS is the issue I did ask as it may have been a Service Pack Issue. As you have a current version then I can only assume that is OK.
Which Via drivers are you using? If they are a Hyperion driver set from Via there are issues with some of their versions. Try updating with the Via 3in1's that came on the MB Driver CD you got with the board.
Otherwise this may be an issue best asked of Logitech as well as I have no idea what their error reporting is trying to tell us. No I am not saying it is the wheel. I am saying we may get a better handle by knowing what that error code is trying to say is all.
Oh ya. Make sure also in Bios that you turn on Legacy Devices. I have that on with mine as well. I did not try the wheel without it but it could be an issue although a remote one. It is something to make sure of though.
Also if your using an external USB hub try the wheel directly into the computer rather than through the hub.
Also if you have a memory card reader or other USB devices try the wheel with them unplugged just to make sure there are no conflicts.
I am off to sleep but let me know and I will try to help more tommorow if that doesn't help.

Runtime Error with Multiple Applications running in one Ear.

I have the Coherence and Tangosol jar files loaded in my ear and the coherence-cache-config.xml in the classpath, if i add two web apps to this ear that use the same jars i get this error:
SRVE0026E: [Servlet Error]-[action]: java.lang.NoClassDefFoundError: com.tangosol.util.ConcurrentMap
but if i run the ear with either web app seperately - it works fine.
I know i have some kind of a configuration issue - i just don't know what.
Any help would be appreciated.
Thanks..

Hi,
what application server do you use, and where do you have the coherence.jar and tangosol.jar?
Best regards,
Robert

Error with multiple widgets on one page (Firefox only)

Hi
I have developed a website in iWeb 09 and have experienced errors when i put more than one widget on a page (second widget always errors out). To date i have just stuck to a limit of 1 per page - but now I want to have two widgets on my home page (google map and a facebook widget)
The page is www.bikesatbrighton.com.au and the two widgets are working in Safari and Explorer, but not in Firefox. I have checked that there are no overlapping frames / widgets etc but have not been able to fix the problem.
Any assistance would be greatly appreciated. Any other general comments about the webpage would also be welcomed.
Cheers
Travis

Welcome to the Apple Discussions. Is it the page that you provided the link to or a second page. I see no problem with that first link in FireFox 3.6.12 and 4.0b7.
What are the widgets? The map and The Facebook thingy? Have you tried clearing the browser's cache and reloading the page?
OT

Error with multiple includes

hi there. i've read a lot of posts on this, but none seems to answer this question:
i'm trying to use 2 includes on one page and am getting this error:
"500 charsetName" - according to a book i've got, it should work. any ideas??? thanks!
my code is:
<%@ include file="header.chtml"%>
<%@ page language="java" contentType="text/html" %>
<%@ page import="java.sql.*,javax.sql.*,javax.naming.*,java.util.*"%>
<%
String ID = null;
ID = request.getParameter("ID");
out.print("<BR>Main Menu: "+ID);
%>
<%@ include file="footer.chtml"%>

hi,
try putting the page directives at the top of the jsp page.
like
<%@ page language="java" contentType="text/html" %>
<%@ page import="java.sql.*,javax.sql.*,javax.naming.*,java.util.*"%>
<%@ include file="header.chtml"%>
i don't find any other problem with your jsp.
thanks
shrikant

Error with multiple rendition assets

Im building af folio in 768x1024 rendered in PDF.
Trying to follow the guideline for Overlay Assets
A have a image sequence included where I have two folders, Overlay asset folder, and inside that a folder named HD, with the image sequence in double format.
It works fine :-)
But when i try with a zoomable picture, and in the links folder place a HD folder with the zoomable photo in double format. It dosen't work.
And also I get this error message
And of course I have checked that the size is double,
No matter if I link the placed photo to the HD or the SD photo (by the way, which is the right?) i get this message!
Can anyone help me out on this?

I have found detected one error, eventhough the image had the double size 500 px width instead of 250 px, the resolution was also double. So I set both to 72 ppi.
Now I don't get the error. But the HD photo is also showing up on the old iPad, it seems like im forced to link to the highres from beginning!
Not logic when I compare with the image sequence!
Any brilliant answers?

Handling error with multiple row insert/update

Hi,
I need to insert multiple rows into a table, and I understand that i need to use executeArrayUpdate().
My problem is this :
1. How do I know in case some of the rows in the array failed during the INSERT?
2. When I do know that, how do I find those particular rows?
Thanks

ODAFEONIHOWO wrote:
Please i need help on how to enter multiple row into mysql with one insert
statement and jsp it's not possible - you'll need to do a batch insert
i have been trying this for weeks without sucess e.g how much experience do you have with Java?

ObjectModel.dll Error with multiple users: InDesign CS6

I have 3 users (myself included) who are having issues with InDesign CS6. We've had issues since upgrading/installing. I've done uninstall's, cleans, fresh downloads and installs, upgrades to the latest versions, and still we are having this issue. I have also done individual file replacements such as the identified ObjectModel.dll on faulty machines with (suspected) known good files from a new download.
Faulting application name: InDesign.exe, version: 8.0.0.370, time stamp: 0x4f72c3ee
Faulting module name: ObjectModel.dll, version: 8.0.0.370, time stamp: 0x4f72c3d4
Exception code: 0xc0000005
Fault offset: 0x0002cd16
Faulting process id: 0x1770
Faulting application start time: 0x01ce26490287a001
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\ObjectModel.dll
Report Id: 5a6d3609-923c-11e2-ba48-c8f7332601d7
Is there any more data that can be provided or will phone support be required?
I've even had the same (above) issue just opening InDesign CS6

Completed download and installation of 8.0.1.406. InDesign opened normally but could not even open the file. Here is the event log:
Faulting application name: InDesign.exe, version: 8.0.1.406, time stamp: 0x50335e39
Faulting module name: DOCUMENT FRAMEWORK.RPLN, version: 8.0.0.370, time stamp: 0x4f72c565
Exception code: 0xc0000005
Fault offset: 0x0001b4db
Faulting process id: 0x10bc
Faulting application start time: 0x01ce2676af15693d
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\DOCUMENT FRAMEWORK.RPLN
Report Id: 30da0a23-926a-11e2-ba48-c8f7332601d7
Restarted PC, InDesign crashed upon load.
Faulting application name: InDesign.exe, version: 8.0.1.406, time stamp: 0x50335e39
Faulting module name: ObjectModel.dll, version: 8.0.0.370, time stamp: 0x4f72c3d4
Exception code: 0xc0000005
Fault offset: 0x0002cd16
Faulting process id: 0x1730
Faulting application start time: 0x01ce2677b5479f73
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\ObjectModel.dll
Report Id: 40052559-926b-11e2-8c56-c8f7332601d7
Canceled recovery of file, opened InDesign, attempted to open file, InDesign crashed again:
Faulting application name: InDesign.exe, version: 8.0.1.406, time stamp: 0x50335e39
Faulting module name: DOCUMENT FRAMEWORK.RPLN, version: 8.0.0.370, time stamp: 0x4f72c565
Exception code: 0xc0000005
Fault offset: 0x0001b4db
Faulting process id: 0xb84
Faulting application start time: 0x01ce2678068109a1
Faulting application path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe InDesign CS6\Required\DOCUMENT FRAMEWORK.RPLN
Report Id: 75a1f9b5-926b-11e2-8c56-c8f7332601d7

Error while posting Customer with Multiple sales areas using DEBMAS05.

Dear experts,
We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05. we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error: "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created! The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization). OSS Note (384462) provides further details about this. One Important point from the note is:
"As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
For your customers, contact persons exist to which a private address or a different business address is assigned.".
This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
If someone have experienced the same issue before and have found a solution to it, kindly help out.

I have found the cause and solution to this problem.
This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
This was resolved by splitting the IDOC into 2.
The solution is to First post only the KNA1 segment and create the customer.
In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”: you would have got the KUNNR after the first step.
Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC.
I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
Cheers
Venkat

Error Message with multiple line

Hi
How to display a error message with multiple line?
Example
     Goods movement not possible for material 101
     Goods movement not possible for material 102
     Goods movement not possible for material 103
is it possible is ABAP? If so please advice me.
Best Regards
Asheek

Hi Anoop,
You can use same thing like this
I suggest write ur message through this.
First set the obecj.
CALL FUNCTION 'APPL_LOG_SET_OBJECT'
for local memory
FUNCTION 'APPL_LOG_WRITE_MESSAGES'
         EXPORTING
              OBJECT              = OBJECT
              SUBOBJECT           = SUBOBJECT
              UPDATE_OR_INSERT    = UPDATE_INSERT_FLAG
         TABLES
              MESSAGES            = MESSAGE_TABLE
         EXCEPTIONS
              OBJECT_NOT_FOUND    = 1
              SUBOBJECT_NOT_FOUND = 2
              OTHERS              = 3.
the call for physical memory
CALL FUNCTION 'APPL_LOG_WRITE_DB'
In this process you only need to provide the Itab with error messages.
Reg,
Arpit

File to RFC with multiple records using BPM Scenario Error...!!!

Hello Guru's,
I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
Can any one tell me what mistake would i have done.
Thanks in advance.

Hi,
There is one similar discussion I found,
FTP TO RFC using BPM
Thanks
Swarup

PO Error in Process with Multiple account assignment

Hi ,
I am working with Extended Classsic scenario.
Problem is with PO with Multiple account assignement.
There is only one user who is getting problem with one particular account assignement "CCC" - Cost Center RP.. . When PO gets created with this particular AAC , it goes into "Error in process" only for one user.
In RZ20 it shows messsage as "Please enter quantity or percentage for account assignment" & "Distr. ind. and partial invoice ind. must be set f or multi acct. assgt.".
On other hand , other users are able to order the PO with the same AAC without any error.
What could be the reason behind this only for one user ?
Regards,
Sheetal

Hi ,
I have checked it intially and both are identical.
Initialy the problem was, user had entered 128 times AA line items ( added & deleted ) in the PO while in the SC it was having only 64.... Our system accepts line items till 99 , so i asked him to delete the items above 99 ..
So after that POs error has gone and it went for approval..
But after approval it again went into error in process
Sheetal

How to isolate error with a record/segment in IDOC with multiple records

I have an IDOC with multiple records/segments (typically 1000 records/segments). Sometime XI can not process the IDOC because of some control characters in data.
1. How can I pre-processed the IDOC to remove those control characters?
Can I use XPATH expression/Java class to do it? How can I configure the XPATH expression/Java class in XI to pre-process the file?
2. Until I have answer to 1st question. I would like to find out the error is exactly for which record? What configuration can I do in XI to isolate the error is with which record/segment in IDOC?
Thanks in advance.

Split the IDoc.
with in the UDF, after the validations if every thing fine, pass as successful records to success_MT and pass it to target system using Branching in BPM.
if errors found in the record, then store the error records in Hash table with in UDF, get the IDoc number, frame as a string and raise alert.
U have to do this in the context of IDoc.
If U wanna get the IDoc Number, Segment Name and field name for every failure, U can pass the expected error field name as constant to UDF, frame the sentence in the UDF like -> <b>IDoc 1234321 segment SEG001 field FLD03 has a special character *</b>.
If U wanna pass this string to source/target, U can do in error messages branch in BPM.
U must use BPM for splitting the IDoc, since it is multi-mapping.
reg.,
Yallabandi.

SQL Script - error in executing the select with multiple conditions

Hi gurus,
I'm having trouble in the command syntax below:
SELECT * FROM "TEST_RVS"."VH_TEST" WHERE "AUFNR" = 20210807 AND "BWART" = 101.
WHAT IS THE CORRECT SYNTAX WHERE TO CONDITION WITH MULTIPLE FIELDS?
Thanks !

What is the error you are getting? Did you try wrapping the values with quotes?
SELECT * FROM "TEST_RVS"."VH_TEST" WHERE "AUFNR" = '20210807' AND "BWART" = '101'.
Cheers,
Rich Heilman

Multiple Application Domain Error with Preloader

Hi all,
I'm attempting to upgrade to Air 3.6. My app runs as a swf on the web and also meant to be packaged as a "slow" build (not interpreter) for iOS since I need the performance of Starling. Since it's a fat app, so thus it has a preloader for the web, which works perfectly. However when I try to start the app in ios-debug on my iPad, I get:
[Fault] exception, information=Error: Error #3747: Multiple application domains are not supported on this operating system.
mPreloader = new PreloaderSwfEmbed();
mPreloaderLoader = Loader(mPreloader.getChildAt(0));        // need to wait until the swf loads before grabbing all the information from it
mPreloaderLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, EmbeddedPreloaderLoadCompleteCB);
On the first line of my code snippet here. How can I insert permission regarding multiple application domains for embedded swfs?
Thanks!
ZS

Ok so I got the swf to load by changing the code above to the following:
          var context:LoaderContext = new LoaderContext(false, ApplicationDomain.currentDomain);
               context.allowCodeImport = true;
               mPreloaderLoader = new Loader();
               mPreloaderLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, EmbeddedPreloaderLoadCompleteCB);
               mPreloaderLoader.loadBytes(new PreloaderSwfEmbed(), context);
But now when I run the app I get a message dialog on the iPad saying:
Uncompiled ActionScript
Your application is attempting to run uncompiled ActionScript, probably due to the use of an embedded SWF. This is unsupposed on iOS. See the Adobe Developer Connection website for more info.
And yes I am using Adobe Air SDK 3.6, and building with -swf-version=19, at least on the main swf. The other swf was made with an fla with Flash Pro.
Any help people? Why is this still not working? I thought it was fixed in 3.6. I must be missing something.
Thanks!

Error with multiple accessors in 10.1.2.1

Similar Messages

Maybe you are looking for