Error with TNS Listener

Hi,
I have installed Oracle XE.
After i start the listener,after say 10 secs or so a window pops up with the below error.
"TNSLSNR.EXE has encountered a problem and needs to close. We are sorry for the inconvenience."
The database was working fine,from yesterday i am facing this issue.
Any reply with regads is appreciated
Thanks in advance
Regards
Ashwini

Hi,
actually it complains about no listener to be available. Is the database listener working ? If you use TNS naming, if you changed this to JDBC URL, does his change the behavior? If yes, check the accessibility of the tnsnames.ora file
Frank

Similar Messages

Problems with tns/listener

Hi,
i have a question regarding a problem i am experiencing in my development oracle env.
i have 2 instances - oracle 11.2.01 and 11.2.0.3.(windows 2008 enterprise)
We were able to connect to both instances without any issues. Few days back we started noticing a strange issue.
We can connect to oracle 11.2.0.3 but not 11.2.0.1.
what happens is when i type in sqlplus username/[email protected] sqlplus connects after a while. It takes good 1.25 minutes.
and sqlplus username/[email protected] connects instantly.
One interesting thing is when i say sqlplus username/password, sqlplus instantly connects to oracle11.2.0.1. Well,
this is because i have my windows system variable defined oracle_sid=oracle11.2.0.1
my question is, does anybody know the reason this cna happen? is anybody familiar? it all started happening one fine evening last week.
The error messsage i see in alert logs are
/* In alert log */
Fatal NI connect error 12570, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.2.0.1.0 - Production
    Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 11.2.0.1.0 - Production
Time: 14-JUN-2013 14:21:20
Tracing not turned on.
Tns error struct:
    ns main err code: 12570
TNS-12570: TNS:packet reader failure
    ns secondary err code: 12560
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
opiodr aborting process unknown ospid (6720) as a result of ORA-609
/* In listener tarce file */
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
** DBGRL Error: 11-JUN-2013 16:51:28 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=FOD-ORADB-DEV$))(SERVICE_NAME=NETLINKII)) * (ADDRESS=(PROTOCOL=tcp)(HOST=128.146.195.86)(PORT=61592)) * establish * NETLINKII * 12560
** DBGRL Error: Text Alert Log
** DBGRL Error: SLERC_OERC, 48180
** DBGRL Error: OSD-00001: additional error information
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
** DBGRL Error: TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
64-bit Windows Error: 53: Unknown error
   TNS-12518: TNS:listener could not hand off client connection
    TNS-12571: TNS:packet writer failure
     TNS-12560: TNS:protocol adapter
Thanks for the help in advance.
Srinath

946544 wrote:
Hi,
i have a question regarding a problem i am experiencing in my development oracle env.
i have 2 instances - oracle 11.2.01 and 11.2.0.3.(windows 2008 enterprise)
We were able to connect to both instances without any issues. Few days back we started noticing a strange issue.
We can connect to oracle 11.2.0.3 but not 11.2.0.1.
what happens is when i type in sqlplus username/[email protected] sqlplus connects after a while. It takes good 1.25 minutes.
and sqlplus username/[email protected] connects instantly.
One interesting thing is when i say sqlplus username/password, sqlplus instantly connects to oracle11.2.0.1. Well,
this is because i have my windows system variable defined oracle_sid=oracle11.2.0.1
my question is, does anybody know the reason this cna happen? is anybody familiar? it all started happening one fine evening last week.
The error messsage i see in alert logs are
/* In alert log */
Fatal NI connect error 12570, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.2.0.1.0 - Production
    Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 11.2.0.1.0 - Production
Time: 14-JUN-2013 14:21:20
Tracing not turned on.
Tns error struct:
    ns main err code: 12570
TNS-12570: TNS:packet reader failure
    ns secondary err code: 12560
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
opiodr aborting process unknown ospid (6720) as a result of ORA-609
/* In listener tarce file */
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
** DBGRL Error: 11-JUN-2013 16:51:28 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=FOD-ORADB-DEV$))(SERVICE_NAME=NETLINKII)) * (ADDRESS=(PROTOCOL=tcp)(HOST=128.146.195.86)(PORT=61592)) * establish * NETLINKII * 12560
** DBGRL Error: Text Alert Log
** DBGRL Error: SLERC_OERC, 48180
** DBGRL Error: OSD-00001: additional error information
O/S-Error: (OS 32) The process cannot access the file because it is being used by another process.
** DBGRL Error: TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
64-bit Windows Error: 53: Unknown error
   TNS-12518: TNS:listener could not hand off client connection
    TNS-12571: TNS:packet writer failure
     TNS-12560: TNS:protocol adapter
Thanks for the help in advance.
Srinath
by definition, you have two different ORACLE_HOME folders.
You should be running a single listener from the V11.2.0.3 directory; which depends upon the content of the PATH variable.
Are the OS Services for both the database & listener started & running now.
Unfortunately, the ORA-12560 is somewhat of a catchall error that results from a handful of different causes.

ODBC error - no tns listener, when trying to connect to database

I have installed Personal Oracle9i in Windows 98 operating system. I am unable to connect to the database using ODBC. I get error TNS-12541 TNS: no listener, even though i configured tnsnames.ora and listener.ora using Net Configuration Assistantand Net Manager. The destination entries in both files match. I get the same error even when I try to do a tnsping on the database name. How do I start the listener with the database already running?

There4s not enough to configure your tnsnames.ora, sqlnet.ora and listener.ora, you must enable the listener to run in your machine, in other O.S. like Workstation or W2000 you can do it "starting services", in W98,
you must run regedit and locate a line that references the listener, must be "AUTO" in that record.
Other way it4s edit your autoxec.bat and add the following line
LSNRCTL START
Hope this comments help you
Luis Ernesto Mariz . Mexico

Error with tns please help

hello,
i'm a very new user of oracle 8.0.3.0.0.infact i'm using for the 1st time.i'm using from past 1 month.i login with default user id and pwd(scott/tiger).but got the following error,can any one help me.what this error means and how to over come this.
SQL*Plus: Release 8.0.3.0.0 - Production on Fri Jan 25 6:15:41 2002
(c) Copyright 1997 Oracle Corporation. All rights reserved.
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
thanks
kavita

Hi
Try starting the listner in your machine.

SQL Developer Error 12505 TNS:listener does not currently know of SID given

Hi all I got this error 12505 today when trying to fire up sql developer. I have tried skimming through the forums for a possible solution yet none has been found which workes on my pc.
My specs are :
OS: Windows 7 Home Premium*
DB: Oracle 11g Express Edition
My listener.ora file
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = XE)
(ORACLE_HOME = C:\app\Enric0\product\11.2.0\dbhome_3)
(SID_DESC =
     (SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\app\Enric0\product\11.2.0\dbhome_3)
(PROGRAM = extproc)
     (SID_DESC =
     (SID_NAME = CLRExtProc)
     (ORACLE_HOME = C:\app\Enric0\product\11.2.0\dbhome_3)
     (PROGRAM = extproc)
my tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST= localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
lsnrctl status gives me this
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 12-FEB-2013 22:22
:14
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date 12-FEB-2013 22:00:29
Uptime 0 days 0 hr. 21 min. 48 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\Enric0-PC\listener
\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Enric0-PC)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
lsnrctl service gives me this
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 12-FEB-2013 22:23
:34
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
and tnsping xe gives me this
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 12-FEB-2
013 22:24:12
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = Enric0-P
C)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
OK (0 msec)
This error occurred to me before and I reinstalled oracle xe and developer and it worked. Yet now it has returned and I kinda wanna fix it cos it's been buggin' me a lot. Any help would be greatly appreciated. Thanks for your attention.

986483 wrote:
Hi all I got this error 12505 today when trying to fire up sql developer. I have tried skimming through the forums for a possible solution yet none has been found which workes on my pc.
My specs are :
OS: Windows 7 Home Premium*
NO Oracle version is ever certified or supported on any Home Edition of Windows.
It appears that the DB has not yet been started.

PGA memory Leak issue along with TNS: listener could not hand off client connection

Hi,
We have two Oracle Database instances in a 32 bit Standard Edition Windows OS machine with 3 GB RAM : 1) 1525 MB (SGA+PGA) 2) 515 MB (SGA+PGA)
Recently we upgraded the RAM from 3 GB to 4 GB. Subsequently we upgraded the SGA + PGA of the 2nd instance to 771 MB.
This has resulted into PGA memory leak issue reported in the alert log file and trace file.
Reverting back the SGA+PGA size to 515 MB solved the issue.
Is this issue related to Address Windowing Extension (AWE)?
Is the reason related to Total memory for all the cumulative Oracle instance should be < 2GB.
How to solve this?
Mon Jul 15 08:21:25 2013
ORACLE V10.2.0.4.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows Server 2003 Version V5.2 Service Pack 2
CPU                 : 4 - type 586, 4 Physical Cores
Process Affinity    : 0x00000000
Memory (Avail/Total): Ph:1068M/4023M, Ph+PgF:4985M/7933M, VA:18M/2047M
Instance name: dp3
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 4484, image: ORACLE.EXE (SHAD)
*** 2013-07-15 08:21:25.133
*** ACTION NAME:() 2013-07-15 08:21:25.133
*** MODULE NAME:() 2013-07-15 08:21:25.133
*** SERVICE NAME:() 2013-07-15 08:21:25.133
*** SESSION ID:(90.829) 2013-07-15 08:21:25.133
******** ERROR: PGA memory leak detected 6302928 > 30176 ********
HEAP DUMP heap name="pga heap" desc=6C98A800
extent sz=0x206c alt=92 het=32767 rec=0 flg=3 opc=3
parent=00000000 owner=00000000 nex=00000000 xsz=0x0
EXTENT 0 addr=7FC10008
Chunk 7fc10010 sz=    64996    free      "               "
Chunk 7fc1fdf4 sz= 2097676    freeable "krfrbAllocate: "
Dump of memory from 0x7FC1FDF4 to 0x7FE20000
7FC1FDF0          1020020D 7FC10010 03871E90      [.. .........]
7FC1FE00 00000000 00000000 00000000 00000000 [................]
Repeat 131103 times
EXTENT 1 addr=7FA00008
Chunk 7fa00010 sz=    64996    free      "               "
Chunk 7fa0fdf4 sz= 2097676    freeable "krfrbAllocate: "
Dump of memory from 0x7FA0FDF4 to 0x7FC10000
7FA0FDF0          1020020D 7FA00010 03871E90      [.. .........]
7FA0FE00 00000000 00000000 00000000 00000000 [................]
Repeat 131103 times
EXTENT 2 addr=7F7F0008
Chunk 7f7f0010 sz=    64996    free      "               "
Chunk 7f7ffdf4 sz= 2097676    freeable "krfrbAllocate: "
Dump of memory from 0x7F7FFDF4 to 0x7FA00000
7F7FFDF0          1020020D 7F7F0010 03871E90      [.. .........]
7F7FFE00 00000000 00000000 00000000 00000000 [................]
Repeat 131103 times
EXTENT 3 addr=70A50008

There may be something fixed in the patch that gives the error rather than mysterious hangs. I would prefer that, myself. There may be something in the patch that changes how Oracle allocates user, system and program areas.
At some point you spend more trying to limp things along in a growing environment than simply upgrading. 32 bit environments these days is an indicator that management is figuring some false economies. But that's their prerogative.
The PGA can be affected by many things, not least of which is how the application uses it. Much has been written about it, my own experience has been more is used than most people say. But that is probably just my app. Note there are different ways to set it, and a parameter with "target" in it might not be a hard limit. Different execution plans for the same code may use different amounts of memory - there can even be situations where forcing some code to use a sort area instead, or even forcing more operations to disk, can free up more pga for everyone else. It depends. But that's why I look at multi-pass operations in dbconsole.

Compile error with action listener, ioexception

Hello, i have a (very basic) swing class which (basically) starts the whole program going as soon as you press a button.
Now somewhere down in the program, i have some file handling, so java makes you write 'throws IOException" all the way through your code.
Now i tried to do that in my swing class but i get the following compile error:
"BaseGui.java": Error #: 463 : method actionPerformed(java.awt.event.ActionEvent) in class BaseGui cannot implement method actionPerformed(java.awt.event.ActionEvent) in interface java.awt.event.ActionListener, implemented method does not throw java.io.IOException at line 31, column 15
I tried changing the "throws IOException" for some trying and catching, but to no avail. Any ideas what the problem could be?

never mind, i figured this one out.
Thanks anyway.

Port of the TNS Listener for the second SAP system

Hello!
I had problems during the installation of the second SAP system with second Oracle DB on the same host (OP is SOLARIS).
The error occurs was faced with TNS Listener.
(> error: TNS Listener is started)
Which settings are applied for the TNS Listener per default in SAPINST?
(e.g. on the same port)
Which settings should I apply in SAPINST for TNS Listener, e.g. configure an another port?
Thank you very much!
regards
Thom

Hello!
Thank you very much!
Even that is the question.
1) If I have selected "ok" during the installation and no further values selected, will SAPINST check whether the Port 1527 is allocated by the first SAP System and create the second Port 1528?
2) Do I have one TNS Listener with two file entries or two TNS Listener?
Thank you very much!
regards
Thom

TNS Listener unstable.

Hi,
I am experiencing problems with TNS listener with my Oracle8 in my NT machine.
In the services, it shows that it is started but it refused to connect. But when I try to stop it, it prompts me that it was not started. I believe that there is a synch problem with NT and oracle. please help and advice. Thanks!

Since restarting the server solves the problem. I think it is related to 2gb memory restriction in windows. Please use /3g switch or reduce the sga size if possible.
Thanks and Regards,
Satheesh Babu.S
Bangalore.

ORA 12541:TNS: listener could not solves SERVICE_NAME given in connect

when i tried to start the service
OracleOraDb10g_home1TNSListenercompiere using services.msc
it has given the following message
Could not start the OracleOraDb10g_home1TNSListenercompiere on local computer .the service could not return an error. This could be an internal window error or service error.
When i tried to connect from client i got the following error.
TNS: listener could not solves SERVICE_NAME given in connect
pls help
harinder

Thanks!
There was os problem of trusted domain.
I have changed sqlnet.ora (NTS to NONE)
Thanks and Regards
Harinder

Java.sql.SQLException: Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor

Good Day,
I'm encountering this problem
     java.sql.SQLException: Listener refused the connection with the following error:
     ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
here's the java code
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
String url = "jdbc:oracle:thin:@//10.143.85.21/UCSL";
String userName = "mssoriano";
String passWord = "mssoriano_4319";
conn = DriverManager.getConnection(url, userName, passWord);
and here's my tnsnames.ora
UCSL =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.143.85.21)(PORT = 1521))
    (CONNECT_DATA =
      (SID = psusldb11)
Please do let me know if what may the cause of the problem and how to solve this. Thank you and God bless.

Hi,
see this example
Connect to Oracle DB via JDBC driver
Frank

An error was encountered performing the requested operation: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor    Vendor code 12505

From sql developer I am trying to connect to database in my local machine. It shows the following below error. Any suggestions?
An error was encountered performing the requested operation:
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Vendor code 12505

lsnrctl results are as shown below
C:\Users\ndodd_000>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:40
:25
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                18-AUG-2013 15:29:41
Uptime                    0 days 2 hr. 10 min. 50 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\ndodd_000\product\11.2.0\dbhome_1\network\admin
\listener.ora
Listener Log File         c:\app\ndodd_000\diag\tnslsnr\Vamsi\listener\alert\log
.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "sysdba" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
Service "sysdbaXDB" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
The command completed successfully
lsnrctl service results
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:
:20
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "sysdba" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:186 refused:0 state:ready
         LOCAL SERVER
Service "sysdbaXDB" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: VAMSI, pid: 904>
         (ADDRESS=(PROTOCOL=tcp)(HOST=Vamsi)(PORT=49237))
The command completed successfully

TNS Listener error while opening a Form !

Hi all,
I have installed Form/Reports 11gr2 with Weblogic 10.3.6 64-bit & database 11gr2.
All installations and configures are successful.
But when I give URL address (servername:portno/forms/frmservlet?form=main) to open a form, it gives me following error;
ora-12514: TNS:listener does not currently know of service requested in connect descriptor.
I searched on google, but didn't clear my error. I also checked Oracle services, all are started.
So please guide me !
Thanks/Regards.
Dass

I never changed settings in tnsnames.ora, it is always as per default settings. If required now then let me know.
Please note that when I connect my form builder with databases, it is connected. But when I run my form it again show same error and open a dialog box for
username,password & databases connection string.
I copied this file into "E:\Oracle\Middleware\asinst_1\config" of form.
Below is my tnsnames.ora file;
# tnsnames.ora Network Configuration File: E:\app\admin\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
Thanks.

TNS Listener error in Obiee 11g

Hi folks,
I am struggling with one in Obiee11g . whenever login into the presentation services(http://localhost:9704/analytics), im getting ,username and password nt authenticated . i saw error msg in the server.log file.
Error msg is :
Received exception while creating connection for pool "mds-owsm": Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Could u guys resolve this problem.
Regards
C'nu

check with this:
Cannot connect to Database from the OBIEE 11g upgraded RPD

Data Guard Broker teasing error ORA-12514: TNS:listener

Hello,
I have spent many hours but don't understand what little thing I am missing or confusing me.. Please help to fix the issue.
Physical Standb db created successfully, but now facing following issue: Though it should be and must be fixed but really making me mad
DGMGRL> SHOW CONFIGURATION;
Configuration - DATA GUARD
Protection Mode: MaxPerformance
Databases:
    dg - Primary database
Fast-Start Failover: DISABLED
Configuration Status:
DISABLED
DGMGRL> ADD DATABASE DG_DB2
> AS CONNECT IDENTIFIER IS DG_DB2
> MAINTAINED AS PHYSICAL;
Error: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Failed.
PRIM:
db_name: DG
db_unique_name: dg
service_names: dg
STBY:
db_name: DG
db_unique_name: dg_db2
service_names: dg_db2
# TNSNAMES same entries on both Primary and Standby: HOSTNAMES are different.
DG =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = db01.domain)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = dg)
DG_DB2 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = db02.domain)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = dg_db2)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = db01.domain)(PORT = 1521))   db02.domain for Standby on standby machine.
# Listener.ora on PRIMARY:
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = db01.domain)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = dg_DGMGRL.domain)
      (ORACLE_HOME = /oracle/app/11g/db)
       (SID_NAME = dg)
       (SERVICE_NAME = dg.domain)
# Listener.ora on Standby:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = dg_db2_DGMGRL.domain)
      (ORACLE_HOME = /oracle/app/11g/db)
       (SID_NAME = dg_db2)
       (SERVICE_NAME = dg_db2.domain)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = db02.domain)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
I created Stby DB with the minimum parameters required, so that I configure BROKER and see it magic, but badly stuck in this situation here. I have read many docs related to this..but can not fix it unfortunately.
Please guide me from your own experience as note ids, blogs are not helping me here...
Bundle of thanks.
Best Regards

Hi,
Your listener.ora file has SERVICE_NAME = dg_db2.domain whereas tnsnames.ora file has SERVICE_NAME = dg_db2.
Check in your database for exact service name and reflect the same in both the files.
SQL> sho parameter service_names
Restart the listener and try connecting.
Thank you!!

Error with TNS Listener

Similar Messages

Maybe you are looking for