Error Wrong partner type LS

Hi All,
I am doing IDOC to File Scenario where i am sending Purchase order details to third party system. When i create or change the PO it should generate ORDER05 idoc and send to PI. I configured output type to generate PO idoc but it is not generating idoc. Configured details is as below
Output type :NEU
In General tab:Access to conditions and multiple issuing is checked
Default value
Dispatch time: Send immediately
Transmission medium: Distribution ALE
Partner function: LS
Processing routines: Distribution( ALE ) RSNASTED ALE_PROCESSING
Partner function:Distribution( ALE ) LS Logical System
Procedure: RMBEF1 Purchase Order.
I activated this procedure in SPRO Tcode
In condition record
I choosen purchase org option and gave the following details.
Pur Org: RS00
Function: LS
Partner: XXXXX001
Medium :A
Date: 4
I did configuration in partner profile by adding orders details and message control details in in XXXXX001. I also configured Distribution model.
When i create PO the above mentioned condition records are coming in the message type. when i check process log in me22 it says Wrong partner type LS The message record of the message control contains a partner role with a partner type LS that cannot be used here. Only the 'KU' and 'LI' partner types are allowed
i used this as reference
www saptechnical com/Tutorials/ALE/AutoIDOCGen/AutomaticIDocGeneration2.htm
I have searched entire SDN form no one has given correct answer. Please let me know what is the problem.
Thanks,
Venky

Hi venkatesh,
Here are the details of the ALE configuration for sending the IDOCS to FILE.
SAP:
1. RFC destination to XI system.
2. Check the message type.
3. create the logical system ( hope this is created if you are working in any projects )
as this is a one time activity and is done by the basis team at the time of post installation process.
LS ---> SAP
LS1--->XI
3. define a port to send the IDOCS.
4. go to WE 20. create a partner profile. and provide the message type in the outbound parameters.
and provide the port details.
5. Create a CDM(BD64) and provide the details.
XI:
1. Create an RFC connection to SAP system.
2. Define the port details from IDX1
3. upload the meta data from IDX2.
go to WE19 and generate the IDOCS and see if the IDocs are sucessfully send to the port or not from WE02.
Check in XI side if the IDocs hits or not.
Thanks,
Jay

Similar Messages

Message "Wrong partner type LS" in message control

Hi All,
I am trying to send PO's out to a middleware system. I have configured the middleware system as a LS (logical system) done all the config required for Message control.
But when I enter Output type = NEU and Medium = A (ALE) and Partner Function = LS and partner name and save the PO, I get the error "Wrong Partner type LS" in the processing log for that message. The details description says "The message record of the message control contains a partner role with a partner type LS that cannot be used here. Only the 'KU' and 'LI' partner types are allowed.". But i need to send it to partner type LS.
Am I missing anything. Please Advise.
Thanks in advance

Hi!
'By default' purchase orders can be send to vendors or plants - the two parties in the document. This is linked to the two different partner types KU and LI. Only partners of this type of a purchase order can be used to send data.
Check, if you can create a partner definition (WE20) for KU (hopefully you have less plants then vendors).
You also need a partner determination for the document - only out of this partners automatically a message output can be assigned.
Regards,
Christian

Wrong Partner Type in IDoc with message type REMADV

Dear all,
We have created 2 IDocs, one for outbound (first in one company code) and one for inbound (receiving company code) with transaction F110 (message type REMADV, Idoc basic type PEXR2001). However, for the first outbound IDoc we have created, we have the wrong Partner type (we would like it to get type KU (customer)) LS (Logic system).
Does anyone know how to change the partner type from the Idoc generationg?
Many thanks,
Ronny

Hi,
Welcome to SDN.
Please delete the exisiting outbound partner profile (WE20) for message type REMADV which under partner type LS (Logical System) and setup new outbound partner profile for partner type KU (Customer).
Regards,
Ferry Lianto

File Error: Wrong File Type for Project File

Just had our 2nd LaCie 2tb hard drive crash. Just completed a project and was about ready to compress it when the drive wouldnt boot up anymore. I tried every program under the sun before eventually sending it off for data recovery.
$1700 dollars later I have all my files, except one little change.
My FCP project files are not recognizable by FCP anymore. In the get info box it says they are "Kind: Final Cut Pro Document" The preview picture is a gradient box with exec in the green text in the upper left corner. I tried adding the .fcp extension, but it still wouldn't open it. I keep getting the "File Error: Wrong File Type" when I try opening it with FCP.
Anything I can do to fix this?
Thanks

You might give the following a try...
1. open the .fcp file with TextEdit
2. save the file again
3. open with fcp
Frank

File error: wrong file type

So my friend dropped my MacBook Pro the other day and broke my hard drive. Most of the data (well, 300 out of 500G) was recovered, but all I *really* cared about was the FEATURE LENGTH FILM I'd spent the last 4 months editing. And of course it was too big to fit on my external hard drive and I'm too broke to buy a new one, so if I can't get it open from the recovered data I'm going to have to re-edit the thing.
The file itself did seem to survive the data recovery process, but when I open the file, it gives me an error: "File error: wrong file type." I've played around with the extensions- first saving the extensionless file as a .fce (this is actually FCE, not FCP, but I thought people might have better answers in this forum), which didn't work, then tried saving it as a .txt, then resaving as .fce, which also didn't work. No matter what I do, it's still giving me the "wrong file type" error.
Is my data probably just corrupted and I'm screwed? Or is there anything else I can try to recover the project? Most of my source files seem to have survived (although they all lost their .mov extension), but the Final Cut file itself just won't open.
Any help would be appreciated! Thanks!
Amy

You might give the following a try...
1. open the .fcp file with TextEdit
2. save the file again
3. open with fcp
Frank

ECryptFs error: wrong fs type

Hi everyone,
I'm trying to set up an encrypted folder in my home directory, but when I try to mount ecrypfts I get:
mount: wrong fs type, bad option, bad superblock on /home/mihasi/.private,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I've installed keyutils-1.4 and ecryptfs-83 from the AUR, which seems to solve this problem for most people. Should I install some additional packages or is there another trick to get it to worK?

Sorry, should have pasted that as well. I copied the command directly from the ArchWiki page, only edited the paths. Here is the latest attempt:
[root@backtop mihasi]# mount -t ecryptfs /home/mihasi/.private /home/mihasi/private
mount: wrong fs type, bad option, bad superblock on /home/mihasi/.private,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Dmesg gives this line of output every time I try the above command:
Error parsing options; rc = [-22]

Receiver partner type in control record is default"

Hi all,
I am Getting 56 Error"Receiver partner type in control record is default".
When I go to that perticular IDoc under control record under parter tab I am providing "PARTNER TYP" AND PORT.When I save these details th idoc is getting posted.
The port ifo is present in we21.I checked RFC Destination,It is fine.
Now where to give this information centrally since I have to manually enter this every time.
Thanks,
SrinivasaP

Hi,
If error is 56.
Check the partner profile is created or not, if not create partner profile, restart the process by TA.BD87.
If partner profile is exist then check the control information in the IDoc file is incorrect. Correct the IDoc file and restart the process
Please check receiver IDoc Adapter is configured with the said details are not.
And if possible map the values in EDI_DC40 control record.then you need not to give these details every time.
Regards
Chilla..

Receiving an export file error: wrong type

I have created a movie several times in FCP and then exported the movie to QT without any problems. Now all of a sudden, I can't get the movie to export correctly. After the 2 hour export, I'll check on FCP to find that the program has shut down without an "Unexpected Shut Down" message. I check for the exported movie which I find in the saved folder. I click to open and verify the completed job, but find that I get an error instead : "Error: Wrong Type".
The last successful movie I created was September 14th, prior to the QT 7.5.5 upgrade. I thought it was the upgrade, as I found out that FCP does not do well with the new QT version, so I reverted to QT 7.5, but I am still experiencing the same problem with FCP quitting and the movie not being able to read.
What is going on? Can anyone help?

Francois:
This is a crazy solution, but this happened to me last week and this solution enabled me to open my files again -- they were all greyed out and I thought I'd lost them. I took my drive in to an Apple Store Genius Bar without resolution and spend 2 hours online with ProApps (FCE/FCP) tech support, also with no resolution.
This fix is based on the fact that FCP when it is started, it automatically opens the project that was open when it was closed. First, in FCP save the current project (this can be any project -- I created a placeholder project -- to a dummy name -- I used "save me". Close FCP and delete the dummy name ("save me") project. Now rename the project that is greyed out and provides the File Error: Wrong Type message that you would like to open to the dummy name, so that it's now called "save me". Now open FCP again. Now save the recuperated file using the original name.
Maarten
Here's what you do.

Wrong Operand Type Error Message - please help

I have built a form and I keep getting the message - Wrong Operand Type every time I either try to preview or save to PDF as the file suddenly becomes 90% blank (I can see the content boxes for any date fields in the form and if I click the highlight fields option I can see place holders for all of the content) but other than that it wont process properly. I have tried going through the document and made sure that item by item the fields are all inline with each other, have the same fonts, etc. I even tried deleting out every single item in the form, previewing it, then placing that item back in and moving on to the next to try a process of elimination to see if I could figure out what item(s) were causing the problem, but still no luck.
Please help.
CG

I, too, am having this error message. I read somewhere that it is either because of the font Helvetica Nueue, or because the files is being shared between a PC and a Mac. The quickest fix I have found, is to take the pdf and open it in Illustrator and convert all the text to curves. Then it should work correctly.
I don't think anyone has found a definitive answer.
thanks

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Error- Enter no more than one partner type of location

Hi,
Iam using SRM4.0,
iam facing one error message "Enter no more than one partner type of location"when user approving the shopping cart
pleae needs your help
Raghuveer.B

Hi,
check whether the note 1155724 is relevant four your release (the text may be not relevant, but the coding shold help).
If you have any BBP_DOC_CHANGE_BADI implementation deimplement it and retest.
Regards,
Peter

Getting error wrong number or type of parameters for EAM_PROCESS_WO_PUB

Hi All,
I am Getting error wrong number or type of parameters for EAM_WO_PROCESS_PUB.PROCESS_WO API, pls any body can help me,pls send code for
EAM_WO_PROCESS_PUB.PROCESS_WO API.
Thanks&Reagrds,
Hanimi Reddy.

Hi srini,
I developed code for work order api EAM_PROCESS_WO_PUB.PROCESS_MASTER_CHILD_WO following and i am getting error wrong number or types of arguments in call to 'PROCESS_MASTER_CHILD_WO, pls see the code and help me
CREATE OR REPLACE PROCEDURE SANG_WR_TO_WO_API/*(ERRBUF OUT VARCHAR2, RETCODE OUT VARCHAR2)*/ IS
v_created_by number;
v_updated_by number;
v_updated_name varchar2(30);
V_ENTITY_ID VARCHAR2(30);
l_EAM_WO_RELATIONS_TBL EAM_PROCESS_WO_PUB.EAM_WO_RELATIONS_TBL_type ;
--:= EAM_PROCESS_WO_PUB.g_miss_EAM_WO_RELATIONS_rec;
l_eam_wo_tbl EAM_PROCESS_WO_PUB.eam_wo_rec_type; --:= EAM_PROCESS_WO_PUB.G_MISS_EAM_WO_rec;
l_eam_op_tbl EAM_PROCESS_WO_PUB.eam_op_tbl_type ;--:= EAM_PROCESS_WO_PUB.G_MISS_eam_op_tbl;
l_eam_op_network_tbl EAM_PROCESS_WO_PUB.eam_op_network_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_op_network_tbl;
l_eam_res_tbl EAM_PROCESS_WO_PUB.eam_res_tbl_type;--:= EAM_PROCESS_WO_PUB.G_MISS_eam_res_tbl;
l_eam_res_inst_tbl EAM_PROCESS_WO_PUB.eam_res_inst_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_res_inst_tbl;
l_eam_sub_res_tbl EAM_PROCESS_WO_PUB.eam_sub_res_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_sub_res_tbl ;
-- l_eam_res_usage_tbl EAM_PROCESS_WO_PUB.eam_res_usage_tbl_type := EAM_PROCESS_WO_PUB.G_MISS_eam_res_usage_tbl;
l_eam_mat_req_tbl EAM_PROCESS_WO_PUB.eam_mat_req_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_mat_req_tbl ;
l_eam_direct_items_tbl EAM_PROCESS_WO_PUB.eam_direct_items_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_direct_items_tbl ;
l_x_eam_wo_tbl EAM_PROCESS_WO_PUB.eam_wo_rec_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_wo_rec;
l__x_EAM_WO_RELATIONS_TBL EAM_PROCESS_WO_PUB.EAM_WO_RELATIONS_TBL_type ;--:= EAM_PROCESS_WO_PUB.g_miss_EAM_WO_RELATIONS_TBL;
l_x_eam_op_tbl EAM_PROCESS_WO_PUB.eam_op_rec_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_op_rec ;
l_x_eam_op_network_tbl EAM_PROCESS_WO_PUB.eam_op_network_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_op_network_tbl;
l_x_eam_res_tbl EAM_PROCESS_WO_PUB.eam_res_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_res_tbl;
l_x_eam_res_inst_tbl EAM_PROCESS_WO_PUB.eam_res_inst_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_res_inst_tbl ;
l_x_eam_sub_res_tbl EAM_PROCESS_WO_PUB.eam_sub_res_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_sub_res_tbl;
-- l_x_eam_res_usage_tbl EAM_PROCESS_WO_PUB.eam_res_usage_tbl_type := EAM_PROCESS_WO_PUB.G_MISS_eam_res_usage_tbl ;
l_x_eam_mat_req_tbl EAM_PROCESS_WO_PUB.eam_mat_req_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_mat_req_tbl;
l_x_eam_direct_items_tbl EAM_PROCESS_WO_PUB.eam_direct_items_tbl_type; --:= EAM_PROCESS_WO_PUB.G_MISS_eam_direct_items_tbl ;
l_x_return_status VARCHAR2(30);
l_x_msg_count NUMBER;
l_x_debug VARCHAR2(30);
l_output_dir VARCHAR2(30);
l_debug_filename VARCHAR2(30) ;
l_debug_file_mode VARCHAR2(30) ;
CURSOR CUR_WTW IS
SELECT
EWR.WIP_ENTITY_ID
,EWR.WIP_ENTITY_NAME
,EWR.ORGANIZATION_ID
,WAC.ORGANIZATION_CODE
,EWR.DESCRIPTION
,EWR.ASSET_GROUP_ID
,EWR.ASSET_NUMBER
,EWR.ASSET_NUMBER_DESCRIPTION
,WAC.ACCOUNTING_CLASS
,WAC.MATERIAL_ACCOUNT
,WAC.MATERIAL_OVERHEAD_ACCOUNT
,WAC.RESOURCE_ACCOUNT
,WAC.OUTSIDE_PROCESSING_ACCOUNT
,WAC.MATERIAL_VARIANCE_ACCOUNT
,WAC.RESOURCE_VARIANCE_ACCOUNT
,WAC.OUTSIDE_PROC_VARIANCE_ACCOUNT
,WAC.STD_COST_ADJUSTMENT_ACCOUNT
,WAC.OVERHEAD_ACCOUNT
,WAC.OVERHEAD_VARIANCE_ACCOUNT
,EWR.WORK_REQUEST_OWNING_DEPT_ID
,EWR.WORK_REQUEST_OWNING_DEPT
,EWR.WORK_REQUEST_PRIORITY_ID
,EWR.WORK_REQUEST_PRIORITY
,EWR.WORK_REQUEST_STATUS_ID
,WAC.ORGANIZATION_NAME
FROM
WIP_EAM_WORK_REQUESTS_V EWR
,WIPFV_ACCOUNTING_CLASSES WAC
,WIP_EAM_PARAMETERS WAP
WHERE
EWR.ORGANIZATION_ID = WAC.ORGANIZATION_ID
AND WAC.ORGANIZATION_ID = WAP.ORGANIZATION_ID
AND WAC.ACCOUNTING_CLASS = WAP.DEFAULT_EAM_CLASS
AND EWR.WORK_REQUEST_STATUS = 'Awaiting Work Order';
BEGIN
--i number := 1;
FND_GLOBAL.apps_initialize (1001255, 50326, 700, 0);
V_CREATED_BY := FND_GLOBAL.USER_ID;
V_UPDATED_BY := FND_GLOBAL.USER_ID;
v_updated_name := FND_GLOBAL.USER_name;
for rec in cur_wtw loop
l_eam_wo_tbl.WIP_ENTITY_ID := rec.wip_entity_id;
l_eam_wo_tbl.ORGANIZATION_ID := rec.ORGANIZATION_ID ;
l_eam_wo_tbl.ASSET_NUMBER := rec.ASSET_NUMBER;
l_eam_wo_tbl.ASSET_GROUP_ID := rec.ASSET_GROUP_ID ;
l_eam_wo_tbl.DESCRIPTION := rec.DESCRIPTION ;
--SELECT WIP_ENTITIES_S.NEXTval INTO V_ENTITY_ID FROM DUAL;
EAM_PROCESS_WO_PUB.PROCESS_MASTER_CHILD_WO
(P_PO_IDENTIFIER => 'EAM'
,P_API_VERSION_NUMBER => 1.0
,P_INIT_MSG_LIST => FALSE
,P_EAM_WO_RELATIONS_TBL => l_EAM_WO_RELATIONS_TBL
,P_EAM_WO_tbl => l_eam_wo_tbl
, p_eam_op_tbl => l_eam_op_tbl
, p_eam_op_network_tbl => l_eam_op_network_tbl
, p_eam_res_tbl => l_eam_res_tbl
, p_eam_res_inst_tbl => l_eam_res_inst_tbl
, p_eam_sub_res_tbl => l_eam_sub_res_tbl
--, p_eam_res_usage_tbl => l_eam_res_usage_tbl
, p_eam_mat_req_tbl => l_eam_mat_req_tbl
, p_eam_direct_items_tbl => l_eam_direct_items_tbl
, x_eam_wo_tbl => l_x_eam_wo_tbl
, X_EAM_WO_RELATIONS_TBL => l__x_EAM_WO_RELATIONS_TBL
, x_eam_op_tbl => l_x_eam_op_tbl
, x_eam_op_network_tbl => l_x_eam_op_network_tbl
, x_eam_res_tbl => l_x_eam_res_tbl
, x_eam_res_inst_tbl => l_x_eam_res_inst_tbl
, x_eam_sub_res_tbl => l_x_eam_sub_res_tbl
-- , x_eam_res_usage_tbl =>l_x_eam_res_usage_tbl
, x_eam_mat_req_tbl => l_x_eam_mat_req_tbl
, x_eam_direct_items_tbl => l_x_eam_direct_items_tbl
, x_return_status => l_x_return_status
, x_msg_count => l_x_msg_count
,p_commit =>'N'
, p_debug => 'N'
, p_output_dir => NULL
, p_debug_filename => 'EAM_WO_DEBUG.log'
, p_debug_file_mode => 'w'
END LOOP;
END SANG_WR_TO_WO_API;
COMMIT;
Thanks ,
Hanimi

M35-S359 Wrong Machine Type error message

Well I will try this again!
HDD replaced
Attempted System Restore
Failure - Error message "Wrong Machine type"
Restore Disk is Valid. I have used it before to restore the Original Drive.
Attempted to run Ghost from the Restore Disk. HDD took the Restore but will NOT boot from it.
I have taken all the proper steps in setting up the Laptop.
Others POSTed for this Model Laptop have had the same issue
Im not going to send it in to an ASP.
I am Toshiba Certified but this one has been a real Pain in the Bottomside.
Im about ready to do what one of my former Customers did to his Laptop out of frustration.
He smashed it until nothing was left.
It seems to me Toshiba want us to sell and support their products but we are not getting the support that we need!
Steve Toquinto
[email protected]

I, too, am having this error message. I read somewhere that it is either because of the font Helvetica Nueue, or because the files is being shared between a PC and a Mac. The quickest fix I have found, is to take the pdf and open it in Illustrator and convert all the text to curves. Then it should work correctly.
I don't think anyone has found a definitive answer.
thanks

Error: wrong number or types of arguments

Getting the following error:-
wrong number or types of arguments in call to 'XMLTYPE'
with the following insert statement:-
INSERT INTO com_xml(name,content)
VALUES (V_FILENAME,XMLType(bfilename('EMAIL_ATTACH', 'JobInstructions.xml')));
Any ideas for a fix folks?

hi guys
managed a work around with utl_file
DECLARE
V_FILENAME VARCHAR2(20):= 'JobInstructions.xml';
V_PATH     VARCHAR2(100):= '/oracle/attachments';
+V_XML      CLOB;                 --HOLDS THE CONTENTS OF THE XML FILE TO BE INSERTED IN TO THE DATABASE+
+VNEWLINE   VARCHAR2(200):= '';   --HOLDS THE LINE TO INSERTED IN TO V_xml+
+VSFILE     utl_file.file_type;   --HOLDS THE FILE+
BEGIN
VSFile := utl_file.fopen(V_PATH, V_FILENAME,'r');
IF utl_file.is_open(VSFILE) THEN
LOOP
BEGIN
utl_file.get_line(VSFILE, vNewLine);
IF vNewLine IS NULL THEN
EXIT;
ELSE
V_XML := V_XML||vNewLine;
END IF;
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--insert the file into com_xml+
--INSERT THE FILE CONTENTS+
INSERT INTO COM_XML(name,content)
VALUES ('STEW',XMLType(V_XML));
end;

FCP Files Will Not Open (File Error: Wrong Type)

I have put together a few pieces using FCP and then unfortunately my LaCie HD got wiped. I was however able to recover all of my files (thank God) but when I go to open any previous FCP files, I get the error message "File Error: Wrong Type" once FCP is opened. I am wondering if there is any way to open these files somehow so I don't lose my work. Thank you.

If they'll open in QuickTime, you could re export them, and thus rebuild them that way.
Otherwise... recapture them. I'm not sure they couldn't be fixed, but more than likely the recovery process messed up the resource forks of these files. Might search in the QuickTime forum here for a fix for that??
Jerry

Error Wrong partner type LS

Similar Messages

Maybe you are looking for