Error WWV-10202

We upgraded from webdb 2.3 to new portal. After upgradation, I try to run the report which is based on parameter called as Region.
There is a lov created and attached to this parmeter also. At the run time, when I come to region paramter it does show all the list of values . But if I select default (ie Selecting '%' sign) it gives me following error :
Unable to perform query (WWV-10202)
ORA-01722: invalid number (WWV-11230)
On the other hand if I select value from the LOV's its working fine. Why its not accepting for default ie all ..? any ideas

if you write your sql which is where condition this ;
where field_name like :parameter_name
the problem was solved.
if you select % for select all of record the parameter value is set %.
Best regards
Dennis

Similar Messages

WWV-10202 or WWV-11230

We upgraded from webdb 2.3 to new portal. After upgradation, I try to run the report which is based on parameter called as Region.
There is a lov created and attached to this parmeter also. At the run time, when I come to region paramter it does show all the list of values . But if I select default (ie selecting '%' sign) it gives me following error :
Unable to perform query (WWV-10202)
ORA-01722: invalid number (WWV-11230)
On the other hand if I select value from the LOV's its working fine. Why its not accepting for default ie all..? any ideas
null

Ronald,
You may want to try searching the Oracle9iAS Portal Applications forum.
This forum is specifically for questions related to the Portal Development Kit.
Sue

TextArea : ORA-06502: PL/SQL: numeric or value error (WWV-16016)

Was trying to use a TextArea in a form to submit some text to a procedure. Found that the text limit seems to be around 1700 bytes. If there is more text in the form I get the following error message:
Error: An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)
The procedure that i recieveing the form is listed below:
procedure test
p_str in varchar2
as
begin
htp.p(p_str);
end;
Was expecting to be able to submit up to 32k of text using the TextArea this way.
Has anyone else run into this problem?
Is this a bug? Workaround???????
We really need to be able to submit at least 4k!

As a workaround,
1> you can create a table with varchar2(4000)
2> build a form on it and insert the data in the table
3> create a procedure to select the data from the table and publish it using htp.p(...)
4> call this procedure using go/call from the OnSuccess section
NOTE: you need to grant execute priv. on this procedure to <portal_schema>_PUBLIC db user

Error WWV-00100 in Report Customization Form

All,
I am getting a WWV-00100 error, when I
click on the customize link for the report.
any tips?
Thanks

Chetan,
select ''| |user_name| |'' as login_id, first_name, last_name,'[View Request Details]' as the_request,'[Create DB Login]' as the_db_req,'[Modify User]' as the_mod
,'[Close request]' as the_action
from portal30.wwsec_person$
where created_on between :the_start and :the_end
and user_name <> db_user
Error encountered when trying to call show_parms
is
Error:
Unexpected error encountered in wwv_render_parmform.show (wwv_render_parmform) (WWV-00100)

Pass parameter from report to report generates error

I am new to Portal. Please help me with this one.
I created two reports using report wizard. Report A lists termination infor group by leaving reasons. Report A takes two parameters: p_termination_date_from, p_termination_date_to.
When Report A is returned, user is supposed to be able to click on termination reason and go to report B, which has more detail of who is terminated under that reason. Report B takes three parameters:
p_Leaving_reason,
p_termination_date_from,
p_termination_date_to.
All these three are passed from Report A.
I use link to pass p_leaving_reason, but not able to use link to pass termination dates. So I use "a href= ..." to pass termination dates in Report A. The report is created without error. But when I run it, it gives me the following error:
Error: Unable to perform query (WWV-10202)
ORA-01858: a non-numeric character was found where a numeric was expected (WWV-11230)
Here is my Report A Statement:
===========================================
select a.LEAVING_REASON, a.meaning, count(distinct(a.EMPLOYEE_NUMBER)) people
from tableA a
WHERE
a.ACTUAL_TERMINATION_DATE >= ''||:P_TERMINATION_DATE_FROM||''
AND
a.ACTUAL_TERMINATION_DATE <= '<a
href="report_b?p_arg_names=P_TERMINATION_DATE_TO&p_arg_values='||:P_TERMINATION_DATE_TO||'">'||:P_TERMINATION_DATE_TO||'</a>'
GROUP BY a.LEAVING_REASON, a.MEANING;
And Report B select statement:
================================
Select * from tableB b
where b.termination_date>=:p_termination_date_from
and
b.termination_date<=:p_termination_date_to;
I appreciate your help.

Update:
Now I put a to_char in front of a.actual_termination_date, it does not give me that error any more. But it doesn't return any row.
Looks like it ignores the value I put in the parameter form. Please help. thank you.
Here is the updated statement for report A:
==============================================
select a.LEAVING_REASON, a.meaning, count(distinct(a.EMPLOYEE_NUMBER)) people
from tableA a
WHERE
to_char(a.ACTUAL_TERMINATION_DATE, 'dd-mon-yyyy') >= ''||:P_TERMINATION_DATE_FROM||''
AND
to_char(a.ACTUAL_TERMINATION_DATE, 'dd-mon-yyyy') <= '<a
href="report_b?p_arg_names=P_TERMINATION_DATE_TO&p_arg_values='||:P_TERMINATION_DATE_TO||'">'||:P_TERMINATION_DATE_TO||'</a>'
GROUP BY a.LEAVING_REASON, a.MEANING;

Error in multi-select LOV in Portal Report parameter

Hi,
I have a Report from SQL Query that currently has a combo-box parameter that's linked to an LOV. Now the client requires for this parameter to be a multiple select instead of a combo box.
I changed the LOV display to multiple select in Customization Form Display Options, and I changed the where clause of the query to this:
AND CASE WHEN (SUBSTR (pav.name, INSTR (pav.name, '.')-1, 1) BETWEEN '0' AND '9')
OR (UPPER (SUBSTR (pav.name, 1, INSTR (pav.name, '.'))) IN ('TBD.', 'PLCV.', 'EPLCV.'))
THEN SUBSTR (pav.name, INSTR (pav.name, '.') + 1)
ELSE pav.name
END IN (NVL (:p_vacancy_name, pav.name))
It works when I select only one value in the LOV, but gets the following errors when I select more than one:
*** If Output Format selected is HTML:
Failed to parse query
Error: ORA-00933: SQL command not properly ended (WWV-11230)
Critical Error in wwerr_api_error.get_errors! SQL Error Message: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWV-)
Error: Unable to execute query (WWV-10201)
No row returned.
*** If Output Format selected is Excel:
ID;ORACLE;N;E P;PGeneral P;P#,##0 P;P#,##0.00 ; ; Global Formatting ; F;C1;FG0R;SM1 ; ; Title Row ;
Error:     Unable to perform query (WWV-10202)
     ORA-01001: invalid cursor (WWV-11230)
Can anyone help me fix these errors?
Thanks,
Lorena

Follow Up:
After some discussions with Steven I tried to move some stuff around. Eventually I found out that if the ViewObjects on which these two table-blocks are based are built on different Entity Objects, then the application works as desired.
So the conclusion seems to be: it is not a good idea to have - probably in the same UIModel - multiple Iterators based on ViewObjects that are based on the same EntityObject.
Note: this is only a work-around: I still do not know exactly what goes wrong and why! It can be in JHeadstart runtime (not so likely), in ADB Binding Layer (very likely) and potentially in ADF BC (quite unlikely).
best regards,
Lucas

Error executing procedure in package

If someone can help me, i'd greatly appreciate it!
I created a package (see code below) in the Portal Navigator and I'm getting the following error when i try to execute the procedure:
ORA-06550: line 2, column 16:
PLS-00201: identifier 'CURSOR' must be declared
ORA-06550: line 2, column 12:
PL/SQL: Item ignored
ORA-06550: line 4, column 46:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 4, column 1:
PL/SQL: Statement ignored
ORA-06550: line 6, column 20:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 6, column 1:
PL/SQL: Statement ignored (WWV-11230)
Failed to parse as PORTAL - declare
local_var1 REF CURSOR;
begin
"CONCORD"."TAB_LINKS"."GETLINKS" ( VLINKS => local_var1, V_tab=> 'Analytics');
htp.p(htf.br||'OUT parameter values:'||htf.br);
htp.p('VLINKS - '||local_var1||htf.br);
end; (WWV-08300)
Create or Replace Package TAB_LINKS
as
TYPE vrefcur IS REF CURSOR;
procedure getlinks(vlinks OUT tab_links.vrefcur,
v_tab IN VARCHAR2 DEFAULT NULL);
END;
Create or Replace Package BODY TAB_LINKS
AS
procedure getlinks
(vlinks OUT tab_links.vrefcur,
v_tab IN VARCHAR2 DEFAULT NULL)
as
vsql varchar2(3000);
vuser varchar2(50) := orasso.wwctx_api.get_user();
vgroup number := orasso.wwsec_api.get_defaultgroup();
BEGIN
/* retrieves the links based on the title and group name */
vsql := 'select url,target,name
from table_links
where groupid= '''||vgroup||'''
and upper(cornertitle)
= '''||upper(v_cornertitle)||'''
and type = ''sidebar''
order by itemid';
--htp.p(vsql);
open vlinks for vsql;
END getlinks;
END;

I tried executing the code in orasso schema
got below error first
Error in creating PACKAGE BODY. (WWV-17098)
Line No. 15 : PLS-00201: identifier 'V_CORNERTITLE' must be declared (WWV-17050)
Line No. 11 : PL/SQL: Statement ignored (WWV-17050)
ORA-24344: success with compilation error (WWV-11230)
Failed to parse as PORTAL - create or replace package body ORASSO.TAB_LINKS as
procedure getlinks
(vlinks OUT tab_links.vrefcur,
v_tab IN VARCHAR2 DEFAULT NULL)
as
vsql varchar2(3000);
vuser varchar2(50) := orasso.wwctx_api.get_user();
vgroup number := orasso.wwsec_api.get_defaultgroup();
Declared 'v_cornertitle' ,the package got created.
Complied also, the status shows valid.

Numeric or value error when submitting form

I have a form based of a stored procedure. The form has about 20 fields on it. For some reason the form only allows data entry on only about 10 of them. If I put data in any of the other 10, I get: "An unexpected error occurred: ORA-06502: PL/SQL: numeric or value error (WWV-16016)"
I have looked everywhere to see what's going on. I checked the procedure to make sure its parameters are good. It takes takes all VARCHAR2's, so thats OK. I checked the fields in the form editor for validation, and none are being validated, so thats OK. I made sure all the fields are updatable and they are. I even checked the table to make sure that the data can go into the fields, even though I know that the error returned there would be through the procedure, not Portal. I am stumped. What am I missing?
Rich

Follow Up: While troubleshooting this, I filled in all the fields with one character each and the form submitted. I added characters little by little to each field until I got the error. It seems like Portal has a problem when I pass X amount of characters from a form. I say "Portal" because I thought this might be an OS parameter, but I get the same error in both Win2000 and Solaris.
Any ideas where this setting is? Or how to change it?
Rich

Error in opening form

Hi,
I am getting following error while i am trying to open the form.
ORA-06502: PL/SQL: numeric or value error: character to number conversion error (WWV-11230)
before that this form was working properly.
Any help in this matter will be highly appreciated. Thanks
Muhammad Ejaz Azimi

Have you updated all the patches. This problem was resolved in one of the patches.
Nick

Error when export application from navigator bar

hello, i had this error when export one application.
Error: ORA-06502: PL/SQL: numeric or value error (WWV-11230)
Unexpected error encountered: ORA-06502: PL/SQL: numeric or value error (WWV-15200)

Which version of portal you are using?
And what is the language installed ?

Trapping exceptions/error messages on form based on procedure

I am trying to display meaningful error messages when various exceptions arise. I have created a form based on a procedure and the procedure works and returns an exception where I want it.
I have been trying to use the PL/SQL Button event handler to return an error message to the user, but have not succeeded. I have tried:
doSubmit;
exception
when others then
p_session.set_value(
p_block_name => 'DEFAULT',
p_attribute_name => '_STATUS',
p_value => 'my error message';
(I have run this code both with a return at the end and not.)
This runs, but this return a page that says:
Error: WWV-0000.
(It does not display 'my error message'.)
I have also tried, from the Portal FAQs:
doSubmit;
exception
when others then
wwa_app_module.set_target('myschema.MY_ERRORS.SHOW?p_arg_names=p_errcode&p_arg_values=-1',
'GO');
where my_errors is a dynamic page that displays an error message when you pass it a value, in this case, -1.
I get the following error message from this code:
PLS-00201: identifier 'WWA_APP_MODULE.SET_TARGET' must be declared
I did find some discussions on problems with exceptions when you have a form based on a procedure, but these were from 2001. Any help with this or directions to documentation would be greatly appreciated.

I worked out one answer: the code provided by Oracle for the second example omitted the portal schema qualifier on the wwa_app_module. It should be (for 10g release 2, at least)
PORTAL.wwa_app_module.set_target('myschema.MY_ERRORS.SHOW?p_arg_names=p_errcode&p_arg_values=-1',
^^^^^^^^^^
'GO');
This worked, and returned the custom error message.
I still can't figure out why the p_session.set_value returns an error message that's just WWV-0000, but I would like to. Any help, even just what page in what document to look at would be appreciated.

Intermedia Server errors

Hi,
When I start Context server the following errors are displayed ..
After it says Connected to the database
DRG-50857: Oracle error in drasmadd
ORA-20000: Intermedia text error
DRG-10202: server failed to register
ORA-01422: Exact fetch returns more than requested number of rows
ORA-06512:at CTXSYS.DRUE, line 126
ORA-06512:at CTXSYS.DRIADM,line 130
ORA-06512: at line 1
and the Server shuts down..
Does anyone know how to rectify it.
It's very urgent
Thanks and Regards
Anand Devaraj
null

V* has never been very good about communicating. Their website error messages, often times, are either not very accurate or very misleading.
I've also found that often when I get errors with IE8, Firefox will work perfectly fine.

Portal repository differences

Hi,
Why would the list of portlets that appear under 'navigator:providers:db_provider:list_of_portlets' differ from the list of portlets that appear under the 'add portlets to region:db_provider:list_of_portlets'? The first list of portlets is correct, however the list that appears in the second case has one portlet with a different name and one portlet that does not appear. The rest of the portlets are fine. I have refreshed the provider several times and I am working with one user only.
Please help!! Thanks

Hi,
When I click the view details link on the Portlet Repository Refresh Status, I get the following error:
Unable to perform query (WWV-10202)
ORA-01722: invalid number (WWV-11230)
no rows returned.
However, the refresh status and refresh result are complete and suceeded respectively.
What does this mean?
Sajit

PL/SQL portlet not showing up in portlet respository for existing provider

I hope you can spare a minute to help. I've created a new PL/SQL portlet and added it to an existing provider package. I've refreshed the portlet repository and refreshed the provider, but the new portlet still doesn't show up. The other portlets in the provider show up fine. Could web cache be the culprit? I'm using Portal R2 9.0.2.6 and PDK July 2003.
Thank you,
Kendra

Thanks!
I did what you suggested, and the page came back:
Portlet Repository Refresh Status
View information about the most recent Portlet Repository refresh, such as who initiated the process, when it was started, and whether it is complete or still in progress. If the refresh is complete, this page also shows when the process finished and whether it was successful. Click View Details to view a more detailed log of the refresh process.
Started By: PORTAL
Started On: April 08, 2002 19:13:38
Completed On: April 08, 2002 19:13:57
Refresh Status: Complete
Refresh Result: Succeeded
View Details
Note that since I had just done a refresh, I would have expected the date to be today's, assuming that the date refers to when the refresh was done, but instead it's April 8th. Strange?
When I clicked on the View Details link, it brought up a page:
Monitor Log Detail Report
Advanced
Error: Unable to perform query (WWV-10202)
ORA-01722: invalid number (WWV-11230)
No row returned.
Not too helpful an error message, huh?
Clicking on the Advanced/Basic links produced identical results (the same exact error message).
The Add Portlets to Region still does not show the portlet I wish to add.
Any additional help much appreciated...
Thanks
Bryan

Portlet not showing up in 'Add Portlets to Region' page

This relates to Portal 9.0.2 (the new version that shipped with iAS 9.0.2).
I created a provider based on a Report, specifying the SQL query to be used, and thus created a portlet which produces a report from the query. It works and I have added it to a region in a page. So far, so good.
Then I created a second provider with a very nearly identical SQL query, set virtually everything to be the same as the attributes for the first portlet. I wish to add it to another region in the same page. However, when I try to do the edit for the page, to add the second portlet, it doesn't show up in the list of portlets in the 'Add Portlets to Region' page, so I can't add it.
Both portlets show up in the Providers list. They both say 'Report from SQL Query' under Type, and both say that their owner is EXAMPLE_APP. However, when I navigate to that owner in the 'Add Portlets to Region' page, only the first portlet shows up. The other one doesn't.
Any ideas as to why this might occur? What do I look for? I've tried to look for any differences between the two portlets, and haven't seen anything obvious.
Help!
Responses much appreciated!
Regards
Bryan

Thanks!
I did what you suggested, and the page came back:
Portlet Repository Refresh Status
View information about the most recent Portlet Repository refresh, such as who initiated the process, when it was started, and whether it is complete or still in progress. If the refresh is complete, this page also shows when the process finished and whether it was successful. Click View Details to view a more detailed log of the refresh process.
Started By: PORTAL
Started On: April 08, 2002 19:13:38
Completed On: April 08, 2002 19:13:57
Refresh Status: Complete
Refresh Result: Succeeded
View Details
Note that since I had just done a refresh, I would have expected the date to be today's, assuming that the date refers to when the refresh was done, but instead it's April 8th. Strange?
When I clicked on the View Details link, it brought up a page:
Monitor Log Detail Report
Advanced
Error: Unable to perform query (WWV-10202)
ORA-01722: invalid number (WWV-11230)
No row returned.
Not too helpful an error message, huh?
Clicking on the Advanced/Basic links produced identical results (the same exact error message).
The Add Portlets to Region still does not show the portlet I wish to add.
Any additional help much appreciated...
Thanks
Bryan

Error WWV-10202

Similar Messages

Maybe you are looking for