Portlet not showing up in 'Add Portlets to Region' page

This relates to Portal 9.0.2 (the new version that shipped with iAS 9.0.2).
I created a provider based on a Report, specifying the SQL query to be used, and thus created a portlet which produces a report from the query. It works and I have added it to a region in a page. So far, so good.
Then I created a second provider with a very nearly identical SQL query, set virtually everything to be the same as the attributes for the first portlet. I wish to add it to another region in the same page. However, when I try to do the edit for the page, to add the second portlet, it doesn't show up in the list of portlets in the 'Add Portlets to Region' page, so I can't add it.
Both portlets show up in the Providers list. They both say 'Report from SQL Query' under Type, and both say that their owner is EXAMPLE_APP. However, when I navigate to that owner in the 'Add Portlets to Region' page, only the first portlet shows up. The other one doesn't.
Any ideas as to why this might occur? What do I look for? I've tried to look for any differences between the two portlets, and haven't seen anything obvious.
Help!
Responses much appreciated!
Regards
Bryan

Thanks!
I did what you suggested, and the page came back:
Portlet Repository Refresh Status
View information about the most recent Portlet Repository refresh, such as who initiated the process, when it was started, and whether it is complete or still in progress. If the refresh is complete, this page also shows when the process finished and whether it was successful. Click View Details to view a more detailed log of the refresh process.
Started By: PORTAL
Started On: April 08, 2002 19:13:38
Completed On: April 08, 2002 19:13:57
Refresh Status: Complete
Refresh Result: Succeeded
View Details
Note that since I had just done a refresh, I would have expected the date to be today's, assuming that the date refers to when the refresh was done, but instead it's April 8th. Strange?
When I clicked on the View Details link, it brought up a page:
Monitor Log Detail Report
Advanced
Error: Unable to perform query (WWV-10202)
ORA-01722: invalid number (WWV-11230)
No row returned.
Not too helpful an error message, huh?
Clicking on the Advanced/Basic links produced identical results (the same exact error message).
The Add Portlets to Region still does not show the portlet I wish to add.
Any additional help much appreciated...
Thanks
Bryan

Similar Messages

  • JSP is not getting displayed in add portlet repositery

    Hi,
    I have registered two servlet in provider.xml and I was able to
    view that servlet as a portlet in add portlet repositery.
    After that I wanted to add one more JSP as portlet under same
    provider. So I have kept JSP in same directory where servlet is
    kept. I have added JSP as portlet in Provider(i.e. provider.xml)
    and given appPath and appRoot for that JSP. Whenever I am trying
    to view my provider by giving following URL
    http://servername/servlet/myprovider
    I am getting message -
    Congratulations! You have successfully reached your Provider's
    Test Page.
    in same page I am able to view my all portlets. in that list I
    am able to view my JSP as a portlet.
    Now I want to add JSP portlet in my page at that time that JSP
    portlet is not getting displayed in add portlet repositery.
    Can anybody tell why JSP is not getting displayed in portlet
    repositery ? What should I do to get it displayed in portlet
    repositery ?
    Thanks in advance.
    Biren

    You have to refresh the Provider. They are a couple of ways to
    do it.
    1. Take a look at the release notes for PDK-Java.
    http://portalstudio.oracle.com/servlet/page?_pageid=468&_dad=ops&
    _schema=OPSTUDIO
    It mentions and auto reload feature that will refresh the
    provider on the PDK-Java side when you make changes to the
    provider.xml. When you add portlet, you simply refresh the
    repository in portal and add the new portlet to a page.
    2. If you do not have the auto_reload parameter, you simply need
    to refresh manually.
    a. After updating the provider.xml, restart the HttpServer where
    your PDK-Java Provider is located.
    b. Refresh the Portlet Repository
    Both these do the same thing, and should solve your problem
    Sue

  • ADF Portlets not showing up

    Hello ,
    I am using Oracle AS 10.1.2 , Oracle Portal 10.1.4 , JDeveloper 10.1.3.3 installed on a Linux box.
    I have also downloaded and run the ADF Runtime Installer JAR file in the box.
    But, when I try to deploy an ADF screen as a JSR 168 portlet it is not showing up as a portlet and is throwing an "500 Internal Server Error". Any ideas ! !
    Although , when I try to run the same portlet in my JDeveloper Webcenter pre-configured OC4J it works fine.
    Please let me know if anyone has found a solution to the above problem.
    Best Regards.

    If its a caching issue, which caches did you try to flush?
    Or can you create a JSP , deploy it to the app servers with the following code
    <%@ page import="com.bea.p13n.cache.* "%>
    <%@ page import="java.util.* "%>
    <%
    String[] cachenames = CacheFactory.getCacheNames();
    for (int i = 0; i<cachenames.length; i++)
    String curCacheName = cachenames;
    CacheFactory.flush(curCacheName);
    %>
    and access this JSP and see if it solves your problem
    If it doesnt solve your problem, do you have personalized desktops for each user or something?
    regards
    deepak

  • Canon MP210 just will not show up in Add Printer

    Trying to help a friend get new (to her) printer added in OS 10.5.8... There isn't even a network involved, just trying to add it as simple USB.
    It's a Canon Pixma MP210 and wasn't in the printer descrips, so i downloaded and installed the most recent driver for it from Canon, which is noted as good for 10.5 etc (and is CUPs to boot).
    its Installer runs just fine... but printer still does not show up in Add Printer, despite restarts, printer attached, not attached, whatever. printer is not in list, "Print Using..." shows no options, and "Add" is greyed out.
    The printer itself was never used by its former owner, it's like new, so it's not likely broken.
    i attempted to repair permissions, and ran into no-go there too. It sticks on acquiring the database, doesn't even get to a progress bar (let it run for almost an hour, no change). Same thing when i start it up/run repair permissions from retail OS 10.5 DVD.
    And this on a smallish (60GB) hard drive that has barely anything on it ....she mostly just websurfs and emails. Tho the finder is a bit slow, there doesn't appear to be anything wrong with the mac (it's an iBook G4) and it passes disk first aid fine.
    Suggestions?

    lisajoy wrote:
    Any idea why Permissions Repair doesn't progress, neither from hard disk nor from DVD? From other posts i've researched here, repaired permissions apparently allowed some canon printers to show themselves.
    If Repair Permissions is not completing then something would be amiss with the OS. But I've never a repair permissions resolve a printer not appearing in the Default browser view. It could certainly fix an issue with the printer being seen but the driver not being found. But for the printer not to be visible in the Default view when it is connected to the Mac via USB, then I don't believe a permissions repair will resolve this - especially also if the printer is not visible in System Profiler. Personally I found a reset of the printing system rather than a repair disk permissions to be more helpful.

  • Fonts not showing correctly only when on my account page on app store

    fonts not showing correctly only when on my account page on app store

    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/

  • Muse not showing contents of Desktop on Tablet & Phone pages

    My Muse 3.1 is not showing contents of Desktop on Tablet & Phone pages... how do i brought them to Tablet & Phone pages?
    Desktop View
    Tablet View
    Phone View

    Thanks Bob for the reply...
    i was just stuck on that part only.. now its clear.
    What I thought that Muse is automatically copy all the contents from Desktop to Tablet & Phone layout.
    Now we have to copy & paste the layout from Desktop.
    Thanks for help.
    Sanjay

  • PL/SQL portlet not showing up in portlet respository for existing provider

    I hope you can spare a minute to help. I've created a new PL/SQL portlet and added it to an existing provider package. I've refreshed the portlet repository and refreshed the provider, but the new portlet still doesn't show up. The other portlets in the provider show up fine. Could web cache be the culprit? I'm using Portal R2 9.0.2.6 and PDK July 2003.
    Thank you,
    Kendra

    Thanks!
    I did what you suggested, and the page came back:
    Portlet Repository Refresh Status
    View information about the most recent Portlet Repository refresh, such as who initiated the process, when it was started, and whether it is complete or still in progress. If the refresh is complete, this page also shows when the process finished and whether it was successful. Click View Details to view a more detailed log of the refresh process.
    Started By: PORTAL
    Started On: April 08, 2002 19:13:38
    Completed On: April 08, 2002 19:13:57
    Refresh Status: Complete
    Refresh Result: Succeeded
    View Details
    Note that since I had just done a refresh, I would have expected the date to be today's, assuming that the date refers to when the refresh was done, but instead it's April 8th. Strange?
    When I clicked on the View Details link, it brought up a page:
    Monitor Log Detail Report
    Advanced
    Error: Unable to perform query (WWV-10202)
    ORA-01722: invalid number (WWV-11230)
    No row returned.
    Not too helpful an error message, huh?
    Clicking on the Advanced/Basic links produced identical results (the same exact error message).
    The Add Portlets to Region still does not show the portlet I wish to add.
    Any additional help much appreciated...
    Thanks
    Bryan

  • New portlets not showing up in portlet repository

    I have created a couple URL based portlets and registered the provider with my portal. When I go to the portlet repository to add the new portlets to a page, they do not show up. If I go the Providers Tab on the Portal Navigator Page, I can see them.
    I suspect this has something to do with my coworker trying to get the Web Cache working though he can't tell me why my portlets aren't showing up.
    Any one have any ideas?

    Web Cache shouldn't impact this (but I'm not saying that it isn't ;-)
    Try the following:
    1) refresh the portlet repository by clicking the "refresh" button in the provider registration page
    2) check the security settings on the portlets - portlets will not be displayed if either the portal security (applied via the portlet repository) or portlet security (applied by adding a SecurityManager to a portlet) denies access

  • Portal page does not show up the edited portlet

    Hi ,
    We were on 3.0.9 and recently migrated to 9.0.2 ......and i am just trying to develop a simple page in which am adding an html portlet on the page ...my doubts are ..
    1. the portlet does not show up immidiately on the page ..
    2.the edited content in the html portlet does not show up on the page ???
    What am i missing here ??? can some body help
    vi

    Might be caching issue.
    Try this:
    Add : &1=2 at the end of URL in the location bar and press enter. If is appears then it is just a caching issue.
    Thanx,
    Chetan.

  • Omni portlet not showing google gadget in Web center Application

    Hi I am using the same thing as given in
    http://download.oracle.com/otndocs/tech/webcenter/files/owc_r11_google_gadgets.htm
    but at last i am not able to visible 'tiny map' ,i tried calendar and mario also but same result
    i am using JDEV11.1.1.4
    if any one have idea
    Thanks in advance
    Divya

    This solution works for us. As orcladmin, use the navigator to go to the page groups. One of the page groups is called "Portlet Repository". Click on the link properties, tab page Access. There you can add Public to the users with View privileges. Good luck, Marko.

  • Portlets not showing

    Hi all,
    Sometimes when I open a page it doesn't show one or more portlets. After doing a refresh F5 it does show them and sometimes it even doesn't show others.
    We are running Oracle Portal Version: 3.0.8.9.8 on W2000 and I am working on NT 4.0 with IE 5.50, my colleague is working on W2000 with IE 5.00
    Did anybody else see this behaviour, what is the solution?
    TIA,
    Eric
    null

    when they don't show, look at the source of the page. The error is often hidden in comment tags within the html. otherwise, try looking at your jserv.log (presuming that you are writing java portlets).
    Regards,
    Roger

  • Printer Not Showing Up In Add List again.

    I made a mistake and accidently deleted my printer from the Printer List (I was removing other printers). It doesn't show up when I try to add it again.
    Here is what I have done:
    1) Removed the com.apple.print.PrintingPrefs.plist and com.apple.print.PrintCenter.plist
    2) Downloaded the latest drives from the HP site (It's an HP Officejet Pro K550)
    3) Logged out/Restarted (several times)
    A funny thing has also occurred.
    The drop down that usually holds the printers that can be added has looks like this:
    AppleTalk
    Bluetooth
    Windows Printing
    HP IP Printing
    The blanks above are present. There are 3 blanks above the HP IP Printing and one blank below.
    The blanks can be selected but not added (I thought it might have been a naming conflict and the printer was just not listing).
    Any help would be greatly appreciated.
    Thank you for your time.

    Welcome to the forums!
    You don't say if you installed after downloading the Printer you deleted, but I suspect it's one not showing, and that you need to reinstall.

  • After loading, why does adobe flash not show up in add on manager - using firefox 5.0

    Loaded adobe flash 10.3.181.34 and it worked fine. However, it does not show up in Firefox add-on manager - using Firefox version 5.0. Running win xp pro sp-3

    shows up as shockwave not flash

  • Printer not showing up on add printer

    We have a network of both PCs and Macs and a central Sharp Copier.  We have the latest driver for Yosemite but the copier is not showing up in the add printer list.  When we try setting the Macs up through the IP menu it says unable to verify printer, etc.
    The printer sets up fine on the PCs.
    The printer IP shows up on an IP scanner but not on our Motorolla Router/Modem from our ISP (Broighthouse).
    The Sharp guys have been out here and have determined the issue is not on the printer side and suggested contacting Apple.
    Thanks in advance for the help!

    Ok...so I have solved my problem. The new router was blocking port 631. I forward this port to the desktop ip address and all is well in windows printing land.

  • 2nd storage pool does not show up in "add share"

    Shows up fine in disk manager, but not at all in "add share" option.  I want the 3 striped disks to show up as a separate entity.  Will also need to do that to 4 more individual disks later, each as a separate disk, and each of those 4 shared individually with their own names.Somewhere, I read the these boxes are setup initially with only 1 share.  Is this forever or is there some way I can turn on the other shares? Thanks,David

    Use the CS4 Clean Utility to unregister all CS3 components, then manually delete all the folders.
    Mylenium

Maybe you are looking for