Error: you cannot create an internal table as work area

Hi, My code is as follows and when i perform a check it gives the above mentioned error in the select statement.
TYPES: BEGIN OF t_vbrk,
        vbeln            TYPE vbrk-vbeln,
        vtweg            TYPE vbrk-vtweg,
      END OF t_vbrk.
DATA vbrktab TYPE TABLE OF t_vbrk.
SELECT      vbeln
                vtweg
         FROM   vbrk
         INTO vbrktab
         FOR ALL ENTRIES IN xxcvb
         WHERE vbeln       = xxcvb-vbeln.
      INSERT TABLE vbrktab.
    ENDSELECT.
where xxcvb is another internal table with some key values.

Hi
I don't know how you've defined XXCVB, but u should write:
TYPES: BEGIN OF T_VBRK,
         VBELN TYPE VBRK-VBELN,
         VTWEG TYPE VBRK-VTWEG,
       END OF T_VBRK.
DATA: VBRKTAB    TYPE TABLE OF T_VBRK,
      WA_VBRKTAB TYPE T_VBRK.
SELECT VBELN VTWEG FROM VBRK INTO TABLE VBRKTAB
FOR ALL ENTRIES IN XXCVB
     WHERE VBELN = XXCVB-VBELN.
LOOP AT VBRKTAB INTO WA_VBRKTAB.
ENDLOOP.
Max

Similar Messages

Internal table and work area

Hi,
can anybody explain the concepts of Internal table and work area.Thanks in advance.

hai,
This may help u.
WORKAREA is a structure that can hold only one record at a time. It is a collection of fields. We use workarea as we cannot directly read from a table. In order to interact with a table we need workarea. When a Select Statement is executed on a table then the first record is read and put into the header of the table and from there put into the header or the workarea(of the same structure as that of the table)of the internal table and then transferred top the body of the internal table or directly displayed from the workarea.
Each row in a table is a record and each column is a field.
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
e.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
Internal tables are used for storing records which are obtained as a result when we use select statement on database. internal tables are run time entities and doesn't occupy any memory. they are dynamic.
internal tables are of types.
1. internal tables with header line. [header and body]
2. internal tables with out header line. [only body]
Workarea is the concept which is mainly useful when working with internal tables with out header line.
at any point of time we can access only one record through header of a internal table. every thing should be done [inserting,modifying, reading ] through header only.
ex: data: itab like standard table of mara with header line.
for internal tables with out header line we will create a work area [explicit header] as type of table for storing data into internal table.
ex: data: itab like mara,
wa like mara.
more about internal table types:
Standard table:
The key access to a standard table uses a sequential search. The time required for an access is linearly dependent on the number of entries in the internal table.
You should usually access a standard table with index operations.
Sorted table:
The table is always stored internally sorted by its key. Key access to a sorted table can therefore use a binary search. If the key is not unique, the entry with the lowest index is accessed. The time required for an access is logarithmically dependent on the number of entries in the internal table.
Index accesses to sorted tables are also allowed. You should usually access a sorted table using its key.
Hash table:
The table is internally managed with a hash procedure. All the entries must have a unique key. The time required for a key access is constant, that is it does not depend on the number of entries in the internal table.
You cannot access a hash table with an index. Accesses must use generic key operations (SORT, LOOP, etc.).
Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index.
The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always
have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for
processing large amounts of data.
TYPES VECTOR TYPE HASHED TABLE OF I WITH UNIQUE KEY TABLE LINE.
TYPES: BEGIN OF LINE,
COLUMN1 TYPE I,
COLUMN2 TYPE I,
COLUMN3 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF SPFLI
WITH UNIQUE KEY CARRID CONNID.
with regards,
B.Sowjanya,
reward points if helpful.

Get the fieldnames of a generic internal table or work area

Hi All,
I have one generic work area which I have created in the below manner...
* ET_DATA itself is a generic table of type ANY...can have any internal table data in it.
* Create dynamic internal table
CREATE DATA lv_new_table LIKE et_data.
ASSIGN lv_new_table->* TO <fs_dyn_table>.
* Create dynamic work area and assign to fieldsymbol.
CREATE DATA lv_new_line LIKE LINE OF <fs_dyn_table>.
ASSIGN lv_new_line->* TO <fs_dyn_wa>.
Now...I need to get the field names of this dynamic internal table or work area..
I have already searched in forum...got many answers..but none them gives me the output.
Please note that I require the field names and not field position..
Awaiting your suggestions on how to get field names of this dynamic work area...

create data wa_ref like line of it_data.
assign wa_ref->* to <p_data>.
desc_table ?= cl_abap_tabledescr=>describe_by_data( it_data ).
desc_struc ?= desc_table->get_table_line_type( ).
describe field <p_data> type rtty components ncom.
This one is working in our environment without any error. it_data is an importing parameter in the signature of a method of type any table.

I need insert /update/modify ztable from internal table or work area

I have one simple problem.
TYPES: BEGIN OF t_account,
        acc_no          LIKE zztaccountheader-acc_no,
        cust_id         LIKE zztaccountheader-cust_id,
        acc_type        LIKE zztaccountheader-acc_type,
        od_option       LIKE zztaccountheader-od_option,
        od_limit        LIKE zztaccountheader-od_limit,
        od_issue_date   LIKE zztaccountheader-od_issue_date,
        END OF t_account.
data: lwa_account TYPE t_account,
     li_account TYPE STANDARD TABLE OF t_account,
bu scerrin i am inputing data :
i want modify updare or insert record into ztable by work area i put following thing
MOVE : zztaccountheader-acc_no        TO lwa_account-acc_no,
           zztcustomer-cust_id            TO lwa_account-cust_id,
           zztaccountheader-acc_type      TO lwa_account-acc_type,
           zztaccountheader-od_option     TO lwa_account-od_option,
           zztaccountheader-od_limit      TO lwa_account-od_limit,
           zztaccountheader-od_issue_date TO lwa_account-od_issue_date.
    INSERT   zztaccountheader CLIENT SPECIFIED FROM lwa_account .
    CLEAR lwa_account.
ENDIF.
i am etting error
The type of the database table and work area (or internal table)
"LWA_ACCOUNT" are not Unicode convertible.
please solve it

hi,
decalre like this.
tables : zztaccountheader.
data : t_account like zztaccountheader occurs 0 with header line.
data: lwa_account TYPE t_account,
li_account TYPE STANDARD TABLE OF t_account,
MOVE : zztaccountheader-acc_no TO lwa_account-acc_no,
zztcustomer-cust_id TO lwa_account-cust_id,
zztaccountheader-acc_type TO lwa_account-acc_type,
zztaccountheader-od_option TO lwa_account-od_option,
zztaccountheader-od_limit TO lwa_account-od_limit,
zztaccountheader-od_issue_date TO lwa_account-od_issue_date.
INSERT zztaccountheader CLIENT SPECIFIED FROM lwa_account .
CLEAR lwa_account.
ENDIF.
rgss
anver
if hlped mark points

Internal table declaration - work area and body

Hi all
I have declared my internal table in my program as
data : itab_wa type ZRESULT_LINE,
       itab    type ZRESULT_ROW.
Where ZRESULT_LINE and ZRESULT_ROW are the structure and table types.
Now I want to add
data: TCOLOR TYPE SLIS_T_SPECIALCOL_ALV.
in my internal table declaration. How can I do this. Please remember I need to have work area and body in my internal table as I have used work area and body in my code.
Waiting..............
Message was edited by: Raju Boda

HI,
See the Declarion types of workarea and Internal tables
* Table declaration (old method)
DATA: BEGIN OF tab_ekpo OCCURS 0,             "itab with header line
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF tab_ekpo.
*Table declaration (new method)     "USE THIS WAY!!!
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,      "itab
      wa_ekpo TYPE t_ekpo.                    "work area (header line)
* Build internal table and work area from existing internal table
DATA: it_datatab LIKE tab_ekpo OCCURS 0,      "old method
      wa_datatab LIKE LINE OF tab_ekpo.
* Build internal table and work area from existing internal table,
* adding additional fields
TYPES: BEGIN OF t_repdata.
        INCLUDE STRUCTURE tab_ekpo. "could include EKKO table itself!!
TYPES: bukrs TYPE ekpo-werks,
       bstyp TYPE ekpo-bukrs.
TYPES: END OF t_repdata.
DATA: it_repdata TYPE STANDARD TABLE OF t_repdata INITIAL SIZE 0,   "itab
      wa_repdata TYPE t_repdata.                 "work area (header line
you need to maintain same structure for both workarea as well Internal table
Regards
Sudheer

Internal table with work area

hi all,
data: BEGIN OF it_summ OCCURS 0.
INCLUDE STRUCTURE yapn_summary.
data: END OF it_summ.
data : wa_demo1 type yapn_summary.
clear wa_demo1.
wa_demo1-sumr = 'hai'.
append wa_Demo1 to it_summ.
WRITE: it_summ-sumr.
its not get output..
i want to display for hai using it_summ.
donot use work area.
how to change it.?
reply me soon,
s.suresh.

You can't write out an internal table - you can only write out a line (or components of a line) of an internal table. So you MUST use a work area. If you use OCCURS 0 then you've a table with a headerline, and so don't need a workarea. However, later versions of ABAP discourage tables with headerline, and it is preferred to define a specific work area. So, either:
data: BEGIN OF it_summ OCCURS 0.
INCLUDE STRUCTURE yapn_summary.
data: END OF it_summ.
clear it_summ.
it_summ-sumr = 'hai'.
append wa_Demo1 to it_summ.
LOOP AT it_summ.
WRITE: it_summ-sumr.
ENDLOOP.
Now, you see here that at some points it_summ refers to the table, and at others to the header-line. This is ambiguous, and therefore BAD. It's better to define the table and work area seperately.
data: it_summ TYPE STANDARD TABLE OF yapn_summary WITH NON-UNIQUE KEY table_line.
data : wa_demo1 type yapn_summary.
clear wa_demo1.
wa_demo1-sumr = 'hai'.
append wa_Demo1 to it_summ.
LOOP AT it_summ INTO wa_demo1.
WRITE: wa_demo1-sumr.
ENDLOOP.
matt

Smartform Table; Internal table to work area

Hi,
I have created smartform with one table,in that internal table values are not moving into workarea,can anyone solve my issue.

Hi Bose,
If you are populating internal table values in progarm and passing this internal table to smartforms
here is the syntax and declaration to follow
data : itab_final type standard table of type_final (some type) with header line .
Pass this under tables in your Z program,
CALL FUNCTION 'smartform name'
       EXPORTING
          archive_index      = toa_dara
          archive_parameters = arc_params
          vbdkl              = vbdkl
          vbdpl              = vbdpl
          makt               = makt
          qals               = qals
          vbco3              = vbco3
        TABLES
          g_final            = g_final
        EXCEPTIONS
          FORMATTING_ERROR   = 1
          INTERNAL_ERROR     = 2
          SEND_ERROR         = 3
          USER_CANCELED      = 4
          OTHERS             = 5.
In Smartforms,
Declare this internal table in form interface under tables as,
G_FINAL     TYPE     Z_TT_FINAL_COA(table type)
And work area in global data as,
WA_G_FINAL     TYPE     ZFINAL_COA (structure)
Now it can be used used in table control under data column as
G_FINAL          INTO                  WA_G_FINAL
Regards,
Sagar.

Can we create global internal table in data dictionary

help me
i want to know whether we can create global internal tables in data dictionary

Hi Swathi,
The whole concept of internal table is to manipulate the data at runtime.
This replaces the concept of two dimentional array in other languages.
The power of internal tables is it gets lakhs of records at runtime. I mean it can accomodate lots of records at runtime.
So you can create a table type in DDIC and use it to declare your internal table.
Yes, You can create global internal tables for function modules.
By declaring the internal table in top include you can use this internal table all the function modules of that function group. So if one function module is filling the data another can use it as it is stored globally.
Hope this answers your curiosity.
Award points if useful else getback.
Aleem.

You cannot create a customer with grouping ZLES

hi friends,
I am encountered with the below message during BP creation "You cannot create a customer with grouping ZLES"
ZLES being the account group..
I ve come across the following..
I made config for BP to Customer ( auto creation)
and also BP to Vendor ( auto creation)
at a time only one of the thing is working either BP to customer or BP to vendor..
when i check the config under Number Range>Define Groupings and Assign Number ranges> in this there is a radio button Int.Std.Grping if this is marked for the grouping of Mast tenant with Cust acc then there is no error for this but error persists while creating BP to Vendor.. and if the radio button is ticked for Landlord with vendor Account then the issue comes for BP to Customer i.e the error "You cannot create a customer with grouping ZLES"
how can i tick both of them together ( if there is possiblity)
kindly help

sorry for late reply.
if ur issue isn;t solved?----
in Define Groupings and Assign Number Ranges dont select the raido button for your grouping . and next thing is while creating business partner. follow these steps...
1 bp
2 click on person, group or org as desired
3 select the role and click create. AND
4 at right hand side corner there is Grouping select the Grouping ( i was missing this step due to which i used to get the error)
hope this will solve ... also check the account groups of both BP and Customer or else there will be synchronisation error..
regards

The type of the database table and work area (or internal table)...

Hello
I am trying to use a database and select all records from it and store them into an internal table.
My code:
Select * from xixi_dbcurrency into table gt_currency.
The error:
"The type of the database table and work area (or internal table) "GT_CURRENCY" are not Unicode-convertible . . . . . . . . . .     "
Any suggestions?
Thank you

Hi Thomas,
Thank you for your inputs above.
But as you suggested is we use INTO CORRESPONDING FIELDS OF TABLE then it resolve the error.
But I have below piece of code:
DATA:    it_new_source TYPE STANDARD TABLE OF _ty_s_sc_1,
              wa_source TYPE _ty_s_sc_1,
              wa_new_source TYPE _ty_s_sc_1,
              ls_target_key TYPE t_target_key.
SELECT * INTO CORRESPONDING FIELDS OF TABLE it_new_source
       FROM /bic/afao06pa100
       FOR ALL ENTRIES IN SOURCE_PACKAGE
       where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
       and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
But since this is reading into corresponding fields of table the data load from one DSO to other DOS is running for long more that 15 hours and still not getting completed and giving dump.
So if I switch the search to below:
SELECT * FROM /bic/afao06pa100
   INTO TABLE it_new_source
       FOR ALL ENTRIES IN SOURCE_PACKAGE
       where /bic/fcckjobno = SOURCE_PACKAGE-/bic/fcckjobno
       and /bic/fcckjitid = SOURCE_PACKAGE-/bic/fcckjitid.
Then I am getting below error:E:The type of the database table and work area (or internal table) "IT_NEW_SOURCE" are not Unicode convertible.
Can you please advice on this, as performance need to improve in start routine code.
Thank You.

The type of the database table and work area are not Unicode convertible

***Data declaration
TYPES : BEGIN OF t_zle_lagerplanung,
                   SEl, "stores which row user has selected
                   kdauf TYPE zle_lagerplanung-kdauf,
                   kdpos TYPE zle_lagerplanung-kdpos,
                   etenr TYPE zle_lagerplanung-etenr,
                   papiermaschine TYPE zle_lagerplanung-papiermaschine,
                   runnr TYPE zle_lagerplanung-runnr,
                   prio TYPE zle_lagerplanung-prio,
                   werk TYPE zle_lagerplanung-werk,
                   durchmesser TYPE zle_lagerplanung-durchmesser,
                   breite TYPE zle_lagerplanung-breite,
                   anzle TYPE zle_lagerplanung-anzle,
                   lgpla TYPE zle_lagerplanung-lgpla,
                   lgtyp TYPE zle_lagerplanung-lgtyp,
                   art TYPE zle_lagerplanung-art,
                   anzhoehe TYPE zle_lagerplanung-anzle,
                   fa TYPE zle_lagerplanung-fa,
END OF t_zle_lagerplanung.
DATA : it_zle_lagerplanung TYPE STANDARD TABLE OF t_zle_lagerplanung INITIAL SIZE 0,
            wa_zle_lagerplanung TYPE t_zle_lagerplanung.
Here I am getting the data in internal table by using thiis select statement.
SELECT kdauf kdpos etenr papiermaschine runnr prio werk durchmesser breite
              anzle lgpla lgtyp art anzhoehe fa
FROM    zle_lagerplanung INTO CORRESPONDING FIELDS OF TABLE it_zle_lagerplanung
WHERE kdauf IN s_kdauf
AND       KDPOS IN s_kdpos
AND      werk = p_werks.
But while updating the particular field in zle_lagerplanung using this statement
UPDATE zle_lagerplanung from table it_zle_lagerplanung.
it is giving syntax error
"The type of the database table and work area (or internal table)
"IT_ZLE_LAGERPLANUNG" are not Unicode convertible. "
Could any one help me out how to resolve this problem....
Thanks in advance

Dear Shayamal,
XXX....are not Unicode convertible
This error comes while inserting or updating database and the fields are not matching between data base table and structure .
Check you fields of data base table and "zle_lagerplanung" and struture "it_zle_lagerplanung" . There fields must match.
thanks and regrds,
Anup Banerjee

Structure of table and work area are not compatible - table control wizard

Structure of table and work area are not compatible is the error i am getting when specifying my internal table and work area in my table control? What am I doing wrong?

hii
this error comes when you have different structure of work area then internal table..so work area will not work here and you will not be able to append records in internal table.
check strucure of internal table and work area.it should be like below.
TYPES:
BEGIN OF type_s_kna1,
     kunnr LIKE kna1-kunnr,            " Customer Number
     name1 LIKE kna1-name1,            " Name
     vbeln LIKE vbap-vbeln,            " Sales Document
END OF type_s_kna1.
* Internal Table And Work Area Declarations For Customer Details      *
DATA : t_kna1 TYPE STANDARD TABLE OF type_s_kna1,
         fs_kna1 TYPE type_s_kna1.
regards
twinkal

Error while creating dynamic internal table.

Hello Expert,
While creating a dynamic internal table, it throw an run time error as :
" LOAD PROGRAM NOT FOUND
CX_SY_PROGRAM_NOT_FOUND"
i tried to debug the program, it found this error comes while calling
CALL METHOD cl_alv_table_create=>create_dynamic_table
please anyone help me out to resolve this problem.
what could be the reason of error? and how to avoid it?
<REMOVED BY MODERATOR>
thanks in advance.
~ shweta.
Edited by: Alvaro Tejada Galindo on Feb 28, 2008 2:41 PM

Hi,
Go through this program.
Report z_dynamic.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
Regards,

Dynamicly creating an internal table with header line

Hi experts,
I am trying to do a read on an internal table using field symbols of type any table. To be able to read more than one row at once, I'd like to read it into another internal table (instead of just one line and instead of looping through them one by one).
So far the following line rendered an error that the target internal table doesn't have a header line
read table <fs_v_tab> WITH KEY (<fs_comp>) = <fs_param>-low INTO <fs_v_tab>.
(also attempted using "<fs_v_tab>->*" & "<fs_v_tab>[]" to be silly)
Based on the following article, I was wondering if it were possible to dynamicly create an internal table with header line.
[http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html|http://help-abap.blogspot.com/2008/09/dynamic-internal-table-creation.html]
Any help or tips on how to dynamicly filter an internal table field-symbol is greatly appreciated!

Just read the online help:
This statement reads a row from internal table itab.
Or more exact:
This statement reads one row from internal table itab.
Therefore you can not read multiple lines into another table. The header line is needed to put the result in. And this is not what you intended, the result will be in the header line, not in the table itself.
If the row to be read is not uniquely specified, the first suitable row is read. In the case of index tables, this row has the lowest table index of all matching rows.
At least you have to do what you dont wanna do: looping.

Cannot solve ORA-30756 "cannot create column or table of type that..."

Hi there!
I'm working on some excersises for the university but just can't get rid of this error.
First, here's my SQL:
[http://pastebin.com/f1266a668]
And here is what I get:
TYPE "LieferserviceTyp" Kompiliert.
TYPE "ArtikelTyp" Kompiliert.
TYPE "LebensmittelTyp" Kompiliert.
TYPE "HaushaltswarenTyp" Kompiliert.
TYPE "ArtikelInArtKombiTyp" Kompiliert.
TYPE "ArtikelKombiTyp" Kompiliert.
TYPE "ArtikelInKatalogTyp" Kompiliert.
TYPE "KatalogTyp" Kompiliert.
Fehler beim Start in Zeile 60 in Befehl:
CREATE TABLE "Artikel" OF "ArtikelTyp" (
PRIMARY KEY("artnr")
Fehler bei Befehlszeile:60 Spalte:0
Fehlerbericht:
SQL-Fehler: ORA-30756: Spalte oder Tabelle mit einem Objekttyp, der ein Supertyp-Attribut enthÃ¤lt, kann nicht erstellt werden
30756. 00000 - "cannot create column or table of type that contains a supertype attribute"
*Cause:    The user tried to create a column or table of an object type that
contains a supertype attribute. This is not supported because
it leads to infinite recursion in our current storage model.
Note that creating a column of a type implies that we
create columns corresponding to all subtype attributes as well.
*Action:   Change the type definition to contain a supertype REF attribute
instead of the supertype object attribute.
Fehler beim Start in Zeile 67 in Befehl:
CREATE TABLE "Kataloge" OF "KatalogTyp" (
PRIMARY KEY("katalog_id")
Fehler bei Befehlszeile:67 Spalte:0
Fehlerbericht:
SQL-Fehler: ORA-30756: Spalte oder Tabelle mit einem Objekttyp, der ein Supertyp-Attribut enthÃ¤lt, kann nicht erstellt werden
30756. 00000 - "cannot create column or table of type that contains a supertype attribute"
*Cause:    The user tried to create a column or table of an object type that
contains a supertype attribute. This is not supported because
it leads to infinite recursion in our current storage model.
Note that creating a column of a type implies that we
create columns corresponding to all subtype attributes as well.
*Action:   Change the type definition to contain a supertype REF attribute
instead of the supertype object attribute.
Fehler beim Start in Zeile 76 in Befehl:
DROP TABLE "Artikel"
Fehlerbericht:
SQL-Fehler: ORA-00942: Tabelle oder View nicht vorhanden
00942. 00000 - "table or view does not exist"
*Cause:
*Action:
Fehler beim Start in Zeile 77 in Befehl:
DROP TABLE "Kataloge"
Fehlerbericht:
SQL-Fehler: ORA-00942: Tabelle oder View nicht vorhanden
00942. 00000 - "table or view does not exist"
*Cause:
*Action:
DROP TYPE "KatalogTyp" erfolgreich.
DROP TYPE "ArtikelInKatalogTyp" erfolgreich.
DROP TYPE "ArtikelKombiTyp" erfolgreich.
DROP TYPE "ArtikelInArtKombiTyp" erfolgreich.
DROP TYPE "HaushaltswarenTyp" erfolgreich.
DROP TYPE "LebensmittelTyp" erfolgreich.
DROP TYPE "ArtikelTyp" erfolgreich.
DROP TYPE "LieferserviceTyp" erfolgreich.
The comments are in german but the structure should be clear I think.
Any help appreciated!

Unfortunately it's a bad idea to store your code samples (or screenshots or whatever) on an external site, because not everybody can get access to such sites, especially if their workplace has limitations on websites that can be visited.
you're pastebin.com is one such site that I cannot access, so I can't see your code.
If you want to paste code and/or data on the forums remember to put the tag: {noformat}{noformat} before _and_ after it, so that the formatting is maintained and it's easier for us to read.

Error: you cannot create an internal table as work area

Similar Messages

Maybe you are looking for