ErrorERR-7621 while login to application

HI, all
I encountered below error when I try to login to one of our Apex application
*"Error     ERR-7621 Could not determine workspace for application (:) on application accept.*
*Expecting p_company or wwv_flow_company cookie to contain security group id of application own"*
The application was exported from one 10g Oracle instance and import to another 11g instance,
both are running Apex 4.1.0.00.32, the application was first developed in Apex 3.2 and we upgraded it to 4.1.
I search through the whole forum and found some similar case, but all without an helpful answer on how to solve the problem.
Is there anyone from the development team can help on this, as we have been using Apex develop quite some number of application,
I am start to worry what will happen to our others application if we need to migrate the db.
Thanks
Vincent

Hi,
Based on the error, I see the apex is not able to associate, correct workspace id to the apex application which you are running.
The cause i think here is, there may be same application number or alias in one of your workspaces of the apex instance.
Please check whether you have same app id or an alias existing in one of your workspaces of the apex instance.
You can check by  by running the below query as DBA or instance admin
SELECT WORKSPACE,APPLICATION_ID,APPLICATION_NAME,ALIAS FROM APEX_APPLICATIONS
or
You can login to apex instance admin and manually look for all the apps in the workspaces.
IF you see same app id in one of your workspaces, then create the app which you are running with new id and run the app and see.
Hope it helps.
Thnx
MK

Similar Messages

  • Error while login to UCM console.

    Hi,
    I am getting below error while login with 'weblogic' in UCM 11g console "http://server IP: 16200/cs"
    "Content Server Request Failed
    Unable to load the user information. Possible database connection failure encountered. Error message: (!csDbUnableToCreateResultSet,Quser(SELECT * FROM Users WHERE LOWER(dName) = LOWER('weblogic'))!$Closed Connection). java.sql.SQLException: Closed Connection. "
    Because of this we are not getting any content on our custom application pages, that we have integrated through placeholder (using site studio for external application).
    Please help!!
    Regards,
    Kundan
    Edited by: Kundan on Jan 24, 2011 1:00 PM

    Hi
    As Yannick mentioned it looks like that the DB is shutdown or the listener is not up and running .
    Check and verify that all is fine with DB end and then see if the issue still persists . Better would be do a full restart for DB to kill and clean all the existing connections for UCM from DB .
    Thanks
    Srinath

  • Error while running SDK application in XIR3 environment

    Hi all,
    Thanks for your support provided so far.
    I have developed a SDK application using BOE SDK in BO XI-R2 environment. This application queries the CMC and provides the list of objects, users etc.,
    While running the  application in BO XI-R3 environment, when I invoke the Login button in my application, I'm getting the following Unhandled Exception as
    "Could not load File or Assembly: "CrystalDecisions.Enterprise.Framework.Infostore version=11.5.3300.0, culture =neutral......."
    Am I missing any Dll file to be included along with  the EXE?
    Can anyone help me in this regard?
    Thanks.

    Hello Bhuvan,
    Do you have BusinessObjects Enterprise (BOE) 3.0 or 3.1?  The .NET implementation was not released until BOE 3.1, so .NET applications wouldn't be expected to work against BOE 3.0.
    Assuming that you have BOE 3.1, then you also have to upgrade your application.  An Enterprise .NET application that references the XI R2 (v11.5) assemblies would not be supported for communicating with a BOE 3.1 system.
    On it's face, the error is saying that Enterprise 11.5 (XI R2) assemblies are missing.  The .NET SDK for BOE XIR2 has to be installed from the Enterprise installation CD.  It is not available as a stand alone installer or MSI.  
    Finally, you've made note of trying to include the Enterprise assemblies with an EXE.  BusinessObjects Enterprise is a web based application.  SAP Business Objects does not fully support using the Enterprise .NET SDK in Windows applications.  It may work, but any issues have to be duplicated in a web application before they'll be accepted for a possible fix.  Additionally, since the XIR2 Enterprise .NET SDK is not available in an stand alone MSI it becomes quite difficult to manage deploying the SDK to multiple workstations.
    Sincerely,
    Dan Kelleher

  • BO 4.1 WEBI reports are not refreshing and FWB 00032 error while login

    Hello All, First, We are not able to refresh our WEBI reports its hanging in between and throwing errors sometimes. Second, while login its giving below error. Account information not recognized: Invalid confidential channel. (FWB 00032) found relevant note : 1737852, but the pre-requisite is met. Issue is intermittent but its resolved now BO application restart. but we need to find out what could be the reason for this. Anyone has got this kind of situation. Regards Munish

    Any Idea frnds.

  • Error while creating OCA application in NWDS 7.1

    Dear Experts,
    I am creating mobile application for Handhelds (OCA) using mobile 7.1.
    I created the service component, ui component and application component. Added the dependencies, build the application, uploaded the 3 components to the server, assigned it to my device.
    But when I login into the mobile client in PDA, in application launcher screen, no application appears. In Device admin portal when i check, the status of MCD is installed.
    Also when i simply run the application from NWDS using the built in PDA simulator, the application doesnt show any data and on the NWDS console i get the following error
    2009-02-10 20:22:22 ...  (com.sap.tc.mobile.cfs.pers.PersistenceManager:release resultset) Thread: Finalizer Error: java.sql.SQLException: Result set is closed
    I am sure the coding part is not a problem. As before this application i created a similar application for Laptops and its working fine.
    Reply Awaited
    Regards
    Priya

    Hi Veera/Abhi
    I have installed MinDB and all the required files on the PDA. It is synchronizing with the middleware.
    On my NWDS PDA  Simulator , the application is appearing but when i click on the application there is no data and it is giving exception
    2009-02-11 13:02:40 ...  (com.sap.tc.mobile.cfs.pers.PersistenceManager:release resultset) Thread: Finalizer Error: java.sql.SQLException: Result set is closed
    Madhu--
    Please find my ans to the following points mentioned by you
    1) BASIS SWCV must be assigned in the Distribution Model Software Component Version tab of the device.
    It is assigned
    2) Activate the "DISTRIBUTE_USER_DETAILS" Rule in the admin.
    Rule is activated
    3) Activate the "DISTRIBUTE_USER_AUTHORIZATIONS" Rule in the admin.
    Rule is activated
    4) Make sure that you have installed the following components in the following sequence in the PDA
    - Creme
    - MinDB/DB2e
    - PDA_eswt_container
    - PDA Runtime.
    Client is  installed in this sequence only. I referrred to help.sap.com while installing
    the application should atleast work in the NWDS PDA simulator. My basic problem is it is not picking  up the data. giving the above mentioned error.
    Regards
    Priya

  • Unable to login to application

    Hi All,
    After doing the cloning in unable to login to applications im getting error "page cannot be displayed".
    Apache error
    168.94.79.130 - - [13/May/2011:08:31:13 -0500] "POST /OA_HTML/fndvald.jsp HTTP/1.1" 302 262 1
    168.94.79.130 - - [13/May/2011:08:31:13 -0500] "GET /OA_HTML/OA.jsp?OAFunc=OAHOMEPAGE HTTP/1.1" 200 230 0
    167.209.2.1 - - [13/May/2011:08:31:16 -0500] "HEAD /hpov_web_connection.html HTTP/1.1" 200 0 0
    Workaround
    Relink ad,f60webmx.change the parameter DLONG_LONG_RUNNING_JVM TO false in jserv.properties.
    Still we are facing the same issue.
    Referd documents.
    After Cloning on Target instance FRM-92050 Failed to connect to the Server [ID 253763.1]
    FRM-92050 Connecting and "Failed to exec runform f60webmx" Starting Forms Server [ID 438231.1]
    Failed To Connect To Server Frm-92050 [ID 253927.1]
    CANNOT LOGIN /OA_HTML/OA.JSP? OAFUNC=OAHOMEPAGE [ID 458614.1]

    hsawwan
    Thanks for the update find the below details.after changing the parameter DLONG_RUNNING_JVM to false i can able to login but im getting error
    while lunching the forms.
    Error
    FRM:92050
    Application 11.5.10.2
    Database: 10.2.0.4.0
    OS hp ux
    Error
    oracle.apps.fnd.framework.OAException: oracle.apps.fnd.cache.CacheException
         at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:603)
    ## Detail 0 ##
    oracle.apps.fnd.cache.CacheException
         at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
    Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: java.lang.NullPointerException
         at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:825)
    Caused by: oracle.apps.jtf.base.resources.FrameworkException:
    An exception occurred in the method CacheAccess.get
    null
    The base exception is:
    null
         at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)
    oracle.apps.fnd.cache.CacheException
         at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
    Caused by: oracle.apps.jtf.base.resources.FrameworkException: Error in IAS Cache: java.lang.NullPointerException
         at oracle.apps.jtf.cache.IASCacheProvider.get(IASCacheProvider.java:825)
         ... 52 more
    Caused by: oracle.apps.jtf.base.resources.FrameworkException:
    An exception occurred in the method CacheAccess.get
    null
    The base exception is:
    null
         at oracle.apps.jtf.base.resources.FrameworkException.convertException(FrameworkException.java:607)

  • Problem while deploying WD application thru SDM

    Hi friends ,facing problem while deploying webdynpro application on SDM.It takes much time deployment but for the past 1 or 2 day its not working properly ..i..e error is coming while deploying WD application................................................"Cannot login to the SAP J2EE Engine using user and password as provided in the Filesystem Secure Store. Enter valid login information in the Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more information, see SAP note 701654.."
    If how know how to resolve this then waiting for ur response..
    Thanx in advance
    Hanif

    Hi Hanif,
    The SDM password should be reset if it is not the same as mentioned in your Filesystem Secure Store or vice versa.
    If you have changed your administrator password, kindly do change the same in secure store as well via the config tool.
    Use the Config Tool to change the entry in secure storage as follows:
    1. Start the Config Tool.
               (Go to  <drive>:\usr\sap\<SID>\<instance>\j2ee\configtool --> configtool.bat.)
    2. Select the secure store node.
               The configuration for the secure storage in the file system appears.
    3. Select the admin/password/<SID> entry.
    4. Enter the administrator user's new password in the "Value" field and choose "Add".
    5. Choose "File" --> "Apply" to save the data.
              Note: Contrary to the message that appears, you do not need to restart the server or cluster for this change to take effect.
    6. Finally restart SDM server.
    Regards,
    Anagha

  • Error setting cookie while login process

    Dear forum users,
    i am getting this error while login into my own application.
    Content-type: text/html; charset=ISO-8859-1 Set-Cookie: DHW_COOKIE=EEDD257F53989F57; path=/; Location: f?p=100:1000:155225166267009
    I am using a process on submit after computation. This process is before the login process.
    10: set Cookie
    20: login
    This source would setting the cookie before login:
    declare
    p_text_raw RAW(128);
    p_key RAW(128) := utl_raw.cast_to_raw('Key88888');
    p_crypto_typ NUMBER := dbms_crypto.des_cbc_pkcs5;
    p_encrypted_raw RAW(2048);
    p_decrypted_raw RAW(2048);
    begin
    -- Benutzername und damit den Cookie-Inhalt verschlüsseln
    p_text_raw := UTL_I18N.STRING_TO_RAW (lower(:P100_USERNAME), 'AL32UTF8');
    p_encrypted_raw := dbms_crypto.encrypt(
    src=> p_text_raw,
    typ => p_crypto_typ,
    key => p_key);
    -- Verschlüsseltes Cookie senden
    owa_util.mime_header('text/html', FALSE);
    owa_cookie.send(
    name=>'DHW_COOKIE',
    value=>p_encrypted_raw);
    owa_util.http_header_close;
    exception
    when others then null;
    end;
    Any ideas for this error ?
    regards
    Frank
    Hello community,
    any comments ?
    Edited by: handwerk.net on Dec 16, 2009 7:31 PM

    Here's one more reason why this error occurs in Toad. It is when you have more than one Oracle Client installed on your machine. Even when you select the correct Oracle Home in "Connect Using" field of Toad, you still get this error "Can't initialize OCI. Error -1". So, to solve that you need to go to the installation folder of that Oracle Home (e.g. C:\Oracle\ora92\), then go to the BIN folder. Open Oracle.Key in Notepad and confirm that it is showing Registry entry/path to the correct Oracle Home (e.g. HOME0 or HOME1 or whatever).
    I hope this helps.

  • How to fix error 0x8ABC7004 in labview 8.5? i am also getting error while building my application? help

    I AM FACING THIS ERROR CODE WHILE BUILDING MY APPLICATION IN AN EXECUTABLE.
    The VI is broken. Open the VI in LabVIEW and fix the errors.
    D:\JUICE EXTRACTION only ethernet\VI\Scada.vi
    <Call Chain>Error 1003 occurred at AB_Application.lvclasspen_Top_Level_VIs.vi -> AB_Build.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Page_Preview.vi
    Possible reason(s):
    LabVIEW:  The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located.  Open the VI in LabVIEW using File>>Open and verify that it is runnable.
    my email id is [email protected]

    hi ravenas,
    thanks for the reply.
    anyways, is it possible that whenever guest logins into the system, the windows page bounds configuration like front panel bounds in labview be fetched so that the same will be configured to the vi's front panel programatically.
    by doing this the windows components will automatically get hide.
    or is there any better solution.
    reply
    thanks
    samriddh sarbalhi
    [email protected]

  • Listener refused  while login

    Hi,
    While login into my application i am getting following application
    org.apache.commons.dbcp.DbcpException: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12519, TNS:no appropriate service handler found
    For that every time i am restarting the DB.Then it works fine but after some time again the same error and restart the DB.
    Can any body please suggest me the solution.
    I am using TomCat 5.
    and Oracle DB.

    Try with re-installing your Oracle DB.Re configure it again may be some error came during installation process.

  • Error while running web application through JDEV (10.1.3.0.3) in OC4J

    Error while running web application through JDEV (10.1.3.0.3) in OC4J.
    Here is the error message.
    07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
         Missing class: javax.xml.bind.JAXBContext
         Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
         Loader: oc4j:10.1.3
         Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
         Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
    The missing class is not available from any code-source or loader in the server.
    07/10/02 14:45:28      at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
         at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
         at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
         at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
         at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
         at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
         at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]

    Hi,
    The guide you were refering was pointing to 10.1.2 wizards.
    For the latest 10.1.3 tutorial, please follow the below tutorial link :
    http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
    Hope this helps,
    Sunil..

  • How do I install Snow Leopard while keeping files, applications, and settings

    I need to update my system, I realized that I need Snow Leopard (quiet late) before Maverick. My question is, how can I install it keeping files and all the data. I found this on Internet, does it work?
    Install Snow Leopard while keeping files, applications, and settings
    If you follow these steps, the installer will replace your operating system if one is already present, but will preserve your account information and personal files.  You may have to reinstall some applications, however.
    Insert the install disc (or the first install disc if you have more than one) into your disc drive. Restart your computer while holding down the c key. This causes your computer to start up from the install disc rather than your hard drive. When you see the gray Apple insignia, release c . 
    The Mac OS X installer should open automatically. Follow the on-screen prompts to read and accept the license agreement and begin the installation. When prompted to choose a destination disk, select your preferred location and click Install. 
    When the Mac OS X installation finishes with the disc, restart your computer. After the installation completes, a configuration program may begin automatically if you are installing for the first time. You will need to supply basic setup information for your computer. 
    Update your system software to ensure that you have the most recent operating system components.  From the Apple menu, select Software Update... , and then follow the instructions on the screen. Often, you will have to restart your computer, and you may have to run Software Update multiple times before it can completely update your system.

    That's why you need to back it up. You won't need to restore the backup immediately afterwards unless something goes wrong during the upgrade, but you'll need it later; the drive will eventually fail.
    (105428)

  • SSO - session time out while navigating across applications

    Hi,
    Problem statement
    Handling session time out while navigating across applications involving SSO
    Current approach
    Application 1
    1. Create session1.
    2. URL rewrite the sesssion ID1 into the link refering to App2.
    Application 2
    1. Create session2
    2. Get the session Id of App1.
    3. send the session ID of App1 in the header
    4. Invalidate the session2
    Application 1
    Get the ID from request and invoke getSession.
    I'm having a very large session timeout at App1.
    Is there a better approach. Ex: Having global session which is shared across multiple
    webapplications.

    "madhav" <[email protected]> wrote:
    >
    Hi,
    Problem statement
    Handling session time out while navigating across applications involving
    SSO
    Current approach
    Application 1
    1. Create session1.
    2. URL rewrite the sesssion ID1 into the link refering to App2.
    Application 2
    1. Create session2
    2. Get the session Id of App1.
    3. send the session ID of App1 in the header
    4. Invalidate the session2
    Application 1
    Get the ID from request and invoke getSession.
    I'm having a very large session timeout at App1.
    Is there a better approach. Ex: Having global session which is shared
    across multiple
    webapplications.
    I have similiar problems in my system. What do you do if the session 1 times out
    during ongoing operations in App 2 ?
    Thanks
    Kejuan

  • I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

    i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

    Notes:
    1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
    2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
    3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

  • Getting ORA-00376 while accessing from application

    Hi,
    Application team is getting below error while accessing the database.
    “ERROR: SQLException, while closing
    connection, exception is ==ORA-00376: file 5 cannot be read at this time
    ORA-01110: data file 5: '/dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts01.dbf'
    Later we renamed the datafile from tblspcsmarts01.dbf  to tblspcsmarts_01.dbf, and still getting the same error while accessing the application.
    And, the datafiles are in online and READ WRITE mode.
    File Status:
    SQL> select file#,name,status,ENABLED,CHECKPOINT_CHANGE#,to_char(CHECKPOINT_TIME,'dd-mon-yy hh24:mi:ss') from v$datafile;
         FILE# NAME                                                         STATUS  ENABLED    CHECKPOINT_CHANGE# TO_CHAR(CHECKPOINT
             1 /dborafiles/nGTA/oradata01/smartsgs/system01.dbf             SYSTEM  READ WRITE           94950500 23-oct-13 15:41:40
             2 /dborafiles/nGTA/oradata01/smartsgs/undo02.dbf               ONLINE  READ WRITE           94950500 23-oct-13 15:41:40
             3 /dborafiles/nGTA/oradata01/smartsgs/sysaux01.dbf             ONLINE  READ WRITE           94950500 23-oct-13 15:41:40
             4 /dborafiles/nGTA/oradata01/smartsgs/users01.dbf              ONLINE  READ WRITE           94950500 23-oct-13 15:41:40
             5 /dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts_01.dbf      ONLINE  READ WRITE           94950500 23-oct-13 15:41:40
             6 /dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts02.dbf       ONLINE  READ WRITE           94950500 23-oct-13 15:41:40
             7 /dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts_03.dbf      ONLINE  READ WRITE           94950500 23-oct-13 15:41:40
    SQL> select FILE_ID,TABLESPACE_NAME,FILE_NAME,BYTES/1024/1024,status  from dba_data_files;
       FILE_ID TABLESPACE_NAME      FILE_NAME                                                    BYTES/1024/1024 STATUS
             1 SYSTEM               /dborafiles/nGTA/oradata01/smartsgs/system01.dbf                        1024 AVAILABLE
             5 TBLSPCSMARTS         /dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts_01.dbf                 7000 AVAILABLE
             3 SYSAUX               /dborafiles/nGTA/oradata01/smartsgs/sysaux01.dbf                        1024 AVAILABLE
             4 USERS                /dborafiles/nGTA/oradata01/smartsgs/users01.dbf                         2048 AVAILABLE
             6 TBLSPCSMARTS         /dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts02.dbf                  6144 AVAILABLE
             7 TBLSPCSMARTS         /dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts_03.dbf                 2048 AVAILABLE
             2 UNDOTBS1             /dborafiles/nGTA/oradata01/smartsgs/undo02.dbf                          1024 AVAILABLE
    File permissions at OS level.
    [oracle@apt3vl05 smartsgs]$ pwd
    /dborafiles/nGTA/oradata01/smartsgs
    [oracle@apt3vl05 smartsgs]$ ls -lrt
    total 29057944
    -rw-r----- 1 oracle dba 7340040192 Oct 23 10:37 tblspcsmarts01.dbf_old
    -rw-r----- 1 oracle dba 1073750016 Oct 23 12:37 temp01.dbf
    -rw-r----- 1 oracle dba 2147491840 Oct 23 15:41 users01.dbf
    -rw-r----- 1 oracle dba 2147491840 Oct 23 15:41 tblspcsmarts_03.dbf
    -rw-r----- 1 oracle dba 6442459136 Oct 23 15:41 tblspcsmarts02.dbf
    -rw-r----- 1 oracle dba 7340040192 Oct 23 15:41 tblspcsmarts_01.dbf
    -rw-r----- 1 oracle dba 1073750016 Oct 23 16:05 sysaux01.dbf
    -rw-r----- 1 oracle dba 1073750016 Oct 23 16:25 undo02.dbf
    -rw-r----- 1 oracle dba 1073750016 Oct 23 16:25 system01.dbf
    -rw-r----- 1 oracle dba    6832128 Oct 23 16:25 control02.ctl
    -rw-r----- 1 oracle dba    6832128 Oct 23 16:25 control01.ctl
    Even i am able to do switch logfile and every thing fine. Below is the excerpt from alert log.
    Wed Oct 23 10:29:59 2013
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_1 parameter default value as /dboracle/orabase/product/10.2.0.4/dbs/arch
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =97
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.4.0.
    System parameters with non-default values:
      processes                = 800
      timed_statistics         = TRUE
      shared_pool_size         = 159383552
      large_pool_size          = 16777216
      java_pool_size           = 159383552
      streams_pool_size        = 16777216
      control_files            = /dborafiles/nGTA/oradata01/smartsgs/control01.ctl, /dborafiles/nGTA/oradata01/smartsgs/control02.ctl, /dboracle/admin/smartsgs/control03.ctl
      db_block_size            = 8192
      db_cache_size            = 16777216
      compatible               = 10.2.0.4
      db_file_multiblock_read_count= 16
      fast_start_mttr_target   = 300
      undo_management          = AUTO
      undo_tablespace          = UNDOTBS1
      undo_retention           = 10800
      O7_DICTIONARY_ACCESSIBILITY= TRUE
      remote_login_passwordfile= EXCLUSIVE
      db_domain                =
      instance_name            = smartsgs
      job_queue_processes      = 10
      background_dump_dest     = /dboracle/admin/smartsgs/bdump
      user_dump_dest           = /dboracle/admin/smartsgs/udump
      core_dump_dest           = /dboracle/admin/smartsgs/cdump
      sort_area_size           = 524288
      db_name                  = smartsgs
      open_cursors             = 800
      star_transformation_enabled= FALSE
      query_rewrite_enabled    = FALSE
      pga_aggregate_target     = 25165824
      aq_tm_processes          = 1
    PMON started with pid=2, OS id=9173
    PSP0 started with pid=3, OS id=9178
    MMAN started with pid=4, OS id=9180
    DBW0 started with pid=5, OS id=9187
    LGWR started with pid=6, OS id=9194
    CKPT started with pid=7, OS id=9200
    SMON started with pid=8, OS id=9202
    RECO started with pid=9, OS id=9204
    CJQ0 started with pid=10, OS id=9206
    MMON started with pid=11, OS id=9208
    MMNL started with pid=12, OS id=9210
    Wed Oct 23 10:30:01 2013
    ALTER DATABASE   MOUNT
    Wed Oct 23 10:30:06 2013
    Setting recovery target incarnation to 1
    Wed Oct 23 10:30:06 2013
    Successful mount of redo thread 1, with mount id 765417449
    Wed Oct 23 10:30:06 2013
    Database mounted in Exclusive Mode
    Completed: ALTER DATABASE   MOUNT
    Wed Oct 23 10:30:06 2013
    ALTER DATABASE OPEN
    Wed Oct 23 10:30:06 2013
    Thread 1 opened at log sequence 855
      Current log# 3 seq# 855 mem# 0: /dborafiles/nGTA/oraredo1/smartsgs/redo01c.log
      Current log# 3 seq# 855 mem# 1: /dborafiles/nGTA/oraredo2/smartsgs/redo02c.log
      Current log# 3 seq# 855 mem# 2: /dborafiles/nGTA/oraredo3/smartsgs/redo03c.log
    Successful open of redo thread 1
    Wed Oct 23 10:30:06 2013
    SMON: enabling cache recovery
    Wed Oct 23 10:30:07 2013
    Successfully onlined Undo Tablespace 6.
    Wed Oct 23 10:30:07 2013
    SMON: enabling tx recovery
    Wed Oct 23 10:30:07 2013
    Database Characterset is WE8ISO8859P15
    Opening with internal Resource Manager plan
    where NUMA PG = 1, CPUs = 2
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    QMNC started with pid=14, OS id=9246
    Wed Oct 23 10:30:10 2013
    Completed: ALTER DATABASE OPEN
    Wed Oct 23 10:37:38 2013
    alter tablespace TBLSPCSMARTS offline
    Wed Oct 23 10:37:38 2013
    Completed: alter tablespace TBLSPCSMARTS offline
    Wed Oct 23 10:43:58 2013
    alter tablespace TBLSPCSMARTS rename datafile '/dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts01.dbf' to '/dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts_01.dbf'
    Wed Oct 23 10:43:58 2013
    Completed: alter tablespace TBLSPCSMARTS rename datafile '/dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts01.dbf' to '/dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts_01.dbf'
    Wed Oct 23 10:44:14 2013
    alter tablespace TBLSPCSMARTS online
    Wed Oct 23 10:44:15 2013
    Completed: alter tablespace TBLSPCSMARTS online
    Wed Oct 23 15:02:00 2013
    Thread 1 advanced to log sequence 856 (LGWR switch)
      Current log# 1 seq# 856 mem# 0: /dborafiles/nGTA/oraredo1/smartsgs/redo01a.log
      Current log# 1 seq# 856 mem# 1: /dborafiles/nGTA/oraredo2/smartsgs/redo02a.log
      Current log# 1 seq# 856 mem# 2: /dborafiles/nGTA/oraredo3/smartsgs/redo03a.log
    Wed Oct 23 15:06:11 2013
    Thread 1 advanced to log sequence 857 (LGWR switch)
      Current log# 2 seq# 857 mem# 0: /dborafiles/nGTA/oraredo1/smartsgs/redo01b.log
      Current log# 2 seq# 857 mem# 1: /dborafiles/nGTA/oraredo2/smartsgs/redo02b.log
      Current log# 2 seq# 857 mem# 2: /dborafiles/nGTA/oraredo3/smartsgs/redo03b.log
    Thread 1 cannot allocate new log, sequence 858
    Checkpoint not complete
      Current log# 2 seq# 857 mem# 0: /dborafiles/nGTA/oraredo1/smartsgs/redo01b.log
      Current log# 2 seq# 857 mem# 1: /dborafiles/nGTA/oraredo2/smartsgs/redo02b.log
      Current log# 2 seq# 857 mem# 2: /dborafiles/nGTA/oraredo3/smartsgs/redo03b.log
    Wed Oct 23 15:06:17 2013
    Thread 1 advanced to log sequence 858 (LGWR switch)
      Current log# 3 seq# 858 mem# 0: /dborafiles/nGTA/oraredo1/smartsgs/redo01c.log
      Current log# 3 seq# 858 mem# 1: /dborafiles/nGTA/oraredo2/smartsgs/redo02c.log
      Current log# 3 seq# 858 mem# 2: /dborafiles/nGTA/oraredo3/smartsgs/redo03c.log
    Wed Oct 23 15:06:17 2013
    Thread 1 advanced to log sequence 859 (LGWR switch)
      Current log# 1 seq# 859 mem# 0: /dborafiles/nGTA/oraredo1/smartsgs/redo01a.log
      Current log# 1 seq# 859 mem# 1: /dborafiles/nGTA/oraredo2/smartsgs/redo02a.log
      Current log# 1 seq# 859 mem# 2: /dborafiles/nGTA/oraredo3/smartsgs/redo03a.log
    Wed Oct 23 15:09:00 2013
    Thread 1 advanced to log sequence 860 (LGWR switch)
      Current log# 2 seq# 860 mem# 0: /dborafiles/nGTA/oraredo1/smartsgs/redo01b.log
      Current log# 2 seq# 860 mem# 1: /dborafiles/nGTA/oraredo2/smartsgs/redo02b.log
      Current log# 2 seq# 860 mem# 2: /dborafiles/nGTA/oraredo3/smartsgs/redo03b.log
    Wed Oct 23 15:09:02 2013
    Thread 1 advanced to log sequence 861 (LGWR switch)
      Current log# 3 seq# 861 mem# 0: /dborafiles/nGTA/oraredo1/smartsgs/redo01c.log
      Current log# 3 seq# 861 mem# 1: /dborafiles/nGTA/oraredo2/smartsgs/redo02c.log
      Current log# 3 seq# 861 mem# 2: /dborafiles/nGTA/oraredo3/smartsgs/redo03c.log
    Wed Oct 23 15:37:37 2013
    alter database datafile 5 online
    Wed Oct 23 15:37:37 2013
    Completed: alter database datafile 5 online
    Wed Oct 23 15:37:58 2013
    alter database datafile 7 online
    Wed Oct 23 15:37:58 2013
    Completed: alter database datafile 7 online
    Wed Oct 23 15:41:09 2013
    Thread 1 advanced to log sequence 862 (LGWR switch)
      Current log# 1 seq# 862 mem# 0: /dborafiles/nGTA/oraredo1/smartsgs/redo01a.log
      Current log# 1 seq# 862 mem# 1: /dborafiles/nGTA/oraredo2/smartsgs/redo02a.log
      Current log# 1 seq# 862 mem# 2: /dborafiles/nGTA/oraredo3/smartsgs/redo03a.log
    Wed Oct 23 15:41:10 2013
    Thread 1 advanced to log sequence 863 (LGWR switch)
      Current log# 2 seq# 863 mem# 0: /dborafiles/nGTA/oraredo1/smartsgs/redo01b.log
      Current log# 2 seq# 863 mem# 1: /dborafiles/nGTA/oraredo2/smartsgs/redo02b.log
      Current log# 2 seq# 863 mem# 2: /dborafiles/nGTA/oraredo3/smartsgs/redo03b.log
    Please advice how can we troubleshoot what could be the issue.
    Thanks,
    Dasarath

    Output of the requested commands.
    SQL> select * from v$datafile_header;
         FILE# STATUS  ERROR                                                                 FORMAT REC FUZ CREATION_CHANGE# CREATION_ TABLESPACE_NAME             TS#     RFILE# RESETLOGS_CHANGE# RESETLOGS CHECKPOINT_CHANGE# CHECKPOIN CHECKPOINT_COUNT      BYTES     BLOCKS NAME                                               SPACE_HEADER    LAST_DEALLOC_SCN
             1 ONLINE                                                                             0 NO  YES                8 23-JUL-09 SYSTEM                        0         1                  1 23-JUL-09           94978106 24-OCT-13              913 1073741824     131072 /dborafiles/nGTA/oradata01/smartsgs/system01.dbf
             2 ONLINE                                                                             0 NO  YES         94828823 22-OCT-13 UNDOTBS1                      6         2                  1 23-JUL-09           94978106 24-OCT-13               37 1073741824     131072 /dborafiles/nGTA/oradata01/smartsgs/undo02.dbf     8388610
             3 ONLINE                                                                             0 NO  YES             7545 23-JUL-09 SYSAUX                        2         3                  1 23-JUL-09           94978106 24-OCT-13              912 1073741824     131072 /dborafiles/nGTA/oradata01/smartsgs/sysaux01.dbf   12582914
             4 ONLINE                                                                             0 NO  YES           170715 23-JUL-09 USERS                         4         4                  1 23-JUL-09           94978106 24-OCT-13              907 2147483648     262144 /dborafiles/nGTA/oradata01/smartsgs/users01.dbf    16777218
             5 ONLINE                                                                             0 NO  YES         94891412 22-OCT-13 TBLSPCSMARTS                  5         5                  1 23-JUL-09           94978106 24-OCT-13               30 7340032000     896000 /dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts_0 20971522
                                                                                                                                                                                 1.dbf
             6 ONLINE                                                                             0 NO  YES         94891511 22-OCT-13 TBLSPCSMARTS                  5         6                  1 23-JUL-09           94978106 24-OCT-13               28 6442450944     786432 /dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts02 25165826
                                                                                                                                                                                 .dbf
             7 ONLINE                                                                             0 NO  YES         94891933 22-OCT-13 TBLSPCSMARTS                  5         7                  1 23-JUL-09           94978106 24-OCT-13               29 2147483648     262144 /dborafiles/nGTA/oradata01/smartsgs/tblspcsmarts_0 29360130
                                                                                                                                                                                 3.dbf
    7 rows selected.
    SQL> select * from v$recover_file;
    no rows selected
    Thanks,
    Dasarath

Maybe you are looking for

  • How do I delete an obsolete email address?

    I use an iMac OS X 10.9.4 and mail 7.3 (1878.6) I need to delete those email addresses I don't use any more in the 'tom' list in the  'from' list in the composing screen of Mail. Thanks.

  • IPhone not recognized by iTunes

    For some reason my iPhone is no longer being recognized by iTunes. I'm running 8.2 and 3.0 firmware. I've tried different cables, ports, reinstalling iTunes, rebooting the computer, rebooting the phone and nothing. The phone is charging when connecte

  • How to pass parameter from javascript to applet ?

    i have some parameters from form in html, and i would like to pass from javascript to an applet, (which a type of calling method in applet from javascript) and get back data from applet to display in html how could i do this ?

  • Can a nook be used with os7

    Can a Nook be used with Apple products?  I don't want network or virus problems.

  • Can I use USB for Samsung LD190 monitor?

    Just curious... I need a second monitor and this monitor can use USB too, but not sure how to make it work with my mac mini, anyone??