Errors during Loading TD from Flat file to PSA

Hi Guys,
I got some errors while loading the flat file transaction data into PSA using infopackage.
Could you guys can help me to solve the below errors. It would be more appreciated if you guys could send some material which tells about these types of errors more detailly.
Points will be awarded.
Field /BIC/ZIO_PRIC ( Position 4 ): External length specification will be ignored
Message no. RSDS101
Diagnosis
The value 23 is specified as output length in Field /BIC/ZIO_PRIC ( Position 4 ). It is also specified that the data is shipped in internal format.
System Response
The length specification for output length is ignored. If the data in the source actually have the specified lengths, this results in conversion errors.
Procedure
Select the external format if required.
Field /BIC/ZIO_PRIC ( Position 4 ): Amount field in internal format; check settings
Message no. RSDS099
Diagnosis
Setting made for Field /BIC/ZIO_PRIC ( Position 4 ) states that the data from the source is available in the internal format.
This is not usually the case for this source system type.
System Response
If you do not change this setting, the data has to be available in the internal SAP format.
Example:
For the Japanese Yen this means: 1000 JPY has to be delivered from the source as 10.00 JPY.
Procedure
Check the data format of the source and where necessary, change the setting to External.
Field /BIC/ZIO_PRIC ( Position 4 ): Missing reference to currency field/unit field
Message no. RSDS151
Diagnosis
If an amount or quantity field is not delivered with values in internal format, an associated currency field or unit field must be specified so that the currency or units can be converted during data import.
System Response
The DataSource can not be activated.
Procedure
Specify a reference field if the data is delivered in external format.
Specify a reference field even if the currency or unit is constant. Fields with fixed values are not part of the data source; they are filled by the system when loaded.

Hi JUergen.
The order of the fields are same as datasource. I didn't make any field for amount in a flat file as it is defined as fixed currency usd when i created a key figure. i don't think so we have to create a field unless we take 0currency is a unit for price instead of fixed currency.
Though we got the above error, it still allows activates the datasource but the 10.00 usd shows as 1000 usd.
Cheers,
Shrinu

Similar Messages

Error while loading table from flat file (.csv)

I have a flat file which i am loading into a Target Table in Oracle Warehouse Builder. It uses SQL Loader Internally to load the data from flat file, I am facing an issue. Please find the following error ( This is an extract from the error log generated)
SQL*Loader-500: Unable to open file (D:\MY CURRENT PROJECTS\GEIP-IHSS-Santa Clara\CDI-OWB\Source_Systems\Acquisition.csv)
SQL*Loader-552: insufficient privilege to open file
SQL*Loader-509: System error: The data is invalid.
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
I believe that this is related to SQL * Loader error.
ACtually the flat file resides in my system ( D:\MY CURRENT PROJECTS\GEIP-IHSS-Santa Clara\CDI-OWB\Source_Systems\Acquisition.csv). I am connecting to a oracle server.
Please suggest
Is it required that i need to place the flat file in Oracle Server System ??
Regards,
Ashoka BL

Hi
I am getting an error as well which is similar to that described above except that I get
SQL*Loader-500: Unable to open file (/u21/oracle/owb_staging/WHITEST/source_depot/Durham_Inventory_Labels.csv)
SQL*Loader-553: file not found
SQL*Loader-509: System error: The system cannot find the file specified.
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
The difference is that Ashoka was getting
SQL*Loader-552: insufficient privilege to open file
and I get
SQL*Loader-553: file not found
The initial thought is that the file does not exist in the directory specified or I have spelt the filename incorrectly it but this has been checked and double checked. The unix directory also has permission to read and write.
Also in the error message is
Control File: C:\u21\oracle\owb_staging\WHITEST\source_depot\INV_LOAD_LABEL_INVENTORY.ctl
Character Set WE8MSWIN1252 specified for all input.
Data File: /u21/oracle/owb_staging/WHITEST/source_depot/Durham_Inventory_Labels.csv
Bad File: C:\u21\oracle\owb_staging\WHITEST\source_depot\Durham_Inventory_Labels.bad
As can be seen from the above it seems to be trying to create the ctl and bad file on my c drive instead of on the server in the same directory as the .csv file. The location is registered to the server directory /u21/oracle/owb_staging/WHITEST/source_depot
I am at a lost as this works fine in development and I have just promoted all the development work to a systest environment using OMBPlus.
The directory structure in development is the same as systest except that the data file is /u21/oracle/owb_staging/WHITED/source_depot/Durham_Inventory_Labels.csv and everything works fine - .ctl and .bad created in the same directory and the data sucessfully loads into a oracle table.
Have I missed a setting in OWB during the promotion to systest or is there something wrong in the way the repository in the systest database is setup?
The systest and development databases are on the same box.
Any help would be much appreciated
Thanks
Edwin

Error in loading data from flat file....

Hi,
While loading the data from flat file , only one column is getting populated in the ODS and after that the sixth column is getting populated with the null values. Also when I save the changes in CSV file .. its not getting saved.
Could you please tell me what could be the probable reason for this.
Also what are the points we should keep in mind while loading from flat files.
Regards,
Jeetu

Hi,
You need to take care of -
1. you flat file structure ( left to right columns) should match with the datasource ( top to down) column to column. if you don't wish to laod some column, leave it as blank column in flat file.
2. your file should not be open when loading data
3. make sure your transfer rules & update rules are defined properly.
4. do the simulation in infopakage first & that will give you fair idea.
5. to start with load data first in PSA Only, check & then take it forward.
hope it helps
regards
Vikash

Error while loading data from flat file to Oracle DB

I am new to ODI. I am trying to load data from a flat file to Oracle DB using the LKM File to Oracle (External Table) and using the IKM Oracle Incremental Update. I am getting the following exception during the "Create External Table" stage:
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2473)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:561)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 44, in <module>
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at org.python.core.PyException.fillInStackTrace(PyException.java:70)
at java.lang.Throwable.<init>(Throwable.java:181)
at java.lang.Exception.<init>(Exception.java:29)
at java.lang.RuntimeException.<init>(RuntimeException.java:32)
at org.python.core.PyException.<init>(PyException.java:46)
at org.python.core.PyException.<init>(PyException.java:43)
at org.python.core.Py.JavaError(Py.java:455)
at org.python.core.Py.JavaError(Py.java:448)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
at org.python.core.PyObject.__call__(PyObject.java:355)
at org.python.core.PyMethod.__call__(PyMethod.java:215)
at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
at org.python.core.PyMethod.__call__(PyMethod.java:206)
at org.python.core.PyObject.__call__(PyObject.java:397)
at org.python.core.PyObject.__call__(PyObject.java:401)
at org.python.pycode._pyx1.f$0(<string>:50)
at org.python.pycode._pyx1.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java:165)
at org.python.core.PyCode.call(PyCode.java:18)
at org.python.core.Py.runCode(Py.java:1204)
at org.python.core.Py.exec(Py.java:1248)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
... 1 more
Caused by: java.sql.SQLException: ORA-30088: datetime/interval precision is out of range
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1110)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2251)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2192)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:347)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
... 33 more
Could anyone please provide any pointers.
Thanks,
Srini.

The code that is executed is as follows:
createTblCmd = r"""
create table ODITEMP.C$_0PARTNER
C1_C1 NUMBER(14),
C2_C2 VARCHAR2(12),
C3_C3 VARCHAR2(18),
C4_C4 NUMBER(7),
C5_C5 TIMESTAMP(11)
ORGANIZATION EXTERNAL
TYPE ORACLE_LOADER
DEFAULT DIRECTORY dat_dir
ACCESS PARAMETERS
RECORDS DELIMITED BY 0x'0D0A'
CHARACTERSET 'WE8ISO8859P1'
STRING SIZES ARE IN CHARACTERS
BADFILE 'partners.txt_%a.bad'
LOGFILE 'partners.txt_%a.log'
DISCARDFILE 'partners.txt_%a.dsc'
SKIP 0
FIELDS
MISSING FIELD VALUES ARE NULL
C1_C1 POSITION(1:14) ,
C2_C2 POSITION(15:26) ,
C3_C3 POSITION(27:44) ,
C4_C4 POSITION(45:51) ,
C5_C5 POSITION(52:62)
LOCATION ('partners.txt')
PARALLEL
REJECT LIMIT UNLIMITED
# Create the statement
myStmt = myCon.createStatement()
# Execute the trigger creation
myStmt.execute(createTblCmd)
myStmt.close()
myStmt = None
# Commit, just in case
myCon.commit()

ODI error while loading data from Flat File to oracle

Hi Gurus,
I am getting following error while loading flat file to oracle table :
ava.lang.NumberFormatException: 554020
     at java.math.BigInteger.parseInt(Unknown Source)
     at java.math.BigInteger.<init>(Unknown Source)
     at java.math.BigDecimal.<init>(Unknown Source)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
The connections between source and target is fine.
Kindly suggest on this error.
Thanks
Shridhar

Hi John,
The source is csv file. By default all columns are string type.The integration is failing at step 3 ( load Data).
I am loading the data from csv file directly to staging table( oracle ).Its one to one mapping.
Shridhar

Error when loading hierarchy from Flat-file

I am trying to get the Fund Group-Fund Fund Center Hierarchy .
Ie : Fund Group
             Fund 1
                    Fund center 1
                    Fund Center 2
       Fund Group 2
I am trying to load it from a flat file.
I got the Flat file structure for the hierarchy.
& I am trying to load it to the Funds Group master data.
I am stuck at IPak.
In the Processing Tab,
Only the option Only PSA is enabled.
My Doubt is :
Why are the other options disabled: could it be because I might have missed something in my previous steps ???
Or
if I load till PSA , I dont know how to load it to the Master data from there -as when I schedule it : I can see it in PSA but then it stays in Yellow & then turns to Red.

Hi,
Go to monitor(RSMO)then verify on detail tab for PSA Load. Hope this help you,
Thanks
DST

Error while loading data from Flat file???

Hi
If in flat file say i have country code as 0190.i have extracted the data to data targets but in the data targets the country code is displayed as 190.how can i rectify this error.I have used Alpha conversion but still i have this problem??
Points Assured
Thanks

its a general practice that the system eliminates the prefix Zeros..
Use the option:
format and define the cell as text
thanks
Edited by: vishnuC on Jun 2, 2008 8:06 AM

Loading Hierarchy from flat file giving dump

Hi gurus,
i am trying to load data from flat file to hierarchy, when i am trying to schedule the infopackage its giving message PLEASE SELECT THE VALID INFOOBJECT and if i proceed even its giving a dump :-ASSIGN LENGTH 0.
i tired using i-doc method...then i am getting records in to BW in red and the same error
InfoObject INFOOBJECT is not available.
i followed the blog
/people/prakash.bagali/blog/2006/02/07/hierarchy-upload-from-flat-files
> points will be assigned for inputs.
Message was edited by:
ravi a

hi guys,
my heirarchy is different from the one in the blog. should i mark all the infoobjects in all nodes as hierarchy relavant or only the bottom one? i also brought the 0hier_node from the business content. i dont know what other valid infoobject is missing ......plz help........
the following are more details about the dump
Program error: ASSIGN with length 0 in program "SAPLRRSV".
Error analysis
An ASSIGN statement in the program "SAPLRRSV" contained a field symbol with
length 0. This is not possible.
length 0.
This is not possible

Loading data from flat file...

Hello,
I am actually experiencing a problem where I cant load data from a flat file into a table. I have actually reverse engineered the flat file into ODI. But the thing is I don't know how to load the data that is reversed into a RDBMS table. Added, I don't know how create this RDBMS table form within ODI to be reflected on the DB. Added, don't know how to load the data from the flat file onto this table without having to add the columns in order to map between the flat file and the table.
In conclusion, I need to know how to create an RDBMS table from within ODI on the database. And how to automatically map the flat file to the DB table and load the data into the DB table.
Regards,
Hossam

Hi Hossam,
We can used ODI procedure to create table in the DB.
Make sure you keep the column name in the table name same as the column name in FLAT FILE so that it can automatically map the column.
and regarding Loading data from FLAT File i.e. our source table is FLAT FILE till ODI 10.1.3.4 we need to manually insert the datastore since the file system cannot be reversed.
Please let me know Hossam if i can assis you further.
Thanks and Regards,
Andy

Loading data from flat file to ODS

Hi Experts,
I have a developed a report, in which Flat file is the datasource and data target as DSO.
Here I have one requriment to Increatment the counter value in TVARVC table after every load compleate.
Can this be done thru Process chain? I belive this can be done thru process chain by creating variable.
If this can be done thru Process chains can any experts send me sample examples code.
Thanks In Advance.
Sreedhar.M

Hi sridhar,
     We have a similar scenario in which we will load data from flat file to datasource the file name (x_20081010.dat) of such format being fetched from the low value of the TVARVC table ... once successfully executed we had program to increment the value of low which increments by one day adn the next day the file with that will be placed in the application server...
    U can create a abap program varaint and attribute for that and u can achieve that.... this is sample code which searches for the string and after some coding i.e once ur file has been loaded successful code u can write similar code to increment or counter values which u are asking for...
search s_tvarvc-low for '20'.
        if sy-subrc ne 0.
          sy-msgty = 'E'.
          sy-msgid = 'ZWM1'.
          sy-msgno = '000'.
          sy-msgv1 = 'Unable to find DATE to increment'.
          raise unable_increment.
        else.
          w_date = s_tvarvc-low+sy-fdpos(08).
          w_nextdate = w_date + 1.
          replace w_date with w_nextdate into s_tvarvc-low.
          modify tvarvc from s_tvarvc.
        endif.
Regards
vamsi

Loading data from flat file to table

Hi,
I am using OWB 10g R2. I have to develop a map which loads data from flat file to table.
1. I have created a .csv file.
2. Import that into OWB by Module Wizard.
3. I have created one external table, which use the .csv file.
After that what I have to do for successfully loading the data into table.
Regards,
Sanjoy

Hi Sanjoy
You can building a mapping to move the data from somewhere to somewhere else. More specifically;
1. create a mapping
2. add external table to mapping
3. add table to mapping for target (it can be unbound)
4. map from external table ingroup to target table ingroup (all columns will be mapped)
5. if target table was unbound right click on target table and click create and bind
This is a basic mapping you can have for this scenario. There is a post here which does something like this, but it will create a File to Table mapping which will use SQLLoader.
http://blogs.oracle.com/warehousebuilder/2009/01/expert_useful_scripts_from_simple_primitives.html
Cheers
David

Error when uploading data from Flat file

I am uplading data from Flat file.
When I am uploading it gives an error
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Can any one help.
Thanx in Advance.
Regards,
Pradeep.

Hi Pradeep,
Refer this link:
CONVERSION_EXIT_CUNIT_INPUT error in flat file load
Re: Error in Flat files upload
Also try this - In the transfer structure check the checkbox fo UNIT and retry the load. Hopefully it should be fine.
Bye
Dinesh

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

Error when loading hierarchy through flat file

Dear All,
We are facing an issue during hierarchy upload through flat file.
Below is the message :-
Error 8 when compiling the upload program: row 658, message: A newer version of data type /BIC/B0000559000 was.
Message no. RSAR233.
Nothing else is being displayed.
Request you to guide on this.
Thanks & Regards,
Anup

Hi,
I faced the same issue earlier.
This is what i did. SE38-RS_TRANSTRU_ACTIVATE_ALL run the program and give your sourcesystem name this activates all the structure including new version /BIC structure what you have stated.
After which you need to refresh the RSA1 Tcode and do the same process again to load the hierarchy.
It should work fine now.
Hope this helps.
Regards,
Harish
Edited by: Harish3152 on May 18, 2010 2:23 PM
Edited by: Harish3152 on May 18, 2010 2:32 PM

How to load Material from Flat File and convert to SAP Format

Hi
I am loading 0Material values from Flat File for mapping purpose. The format of Material in Flat File is "7704132". Within the system, i need to compare the value with 0Material values from the incoming data and update corresponding 0Material in records. for this purpose, I created dummy materials taking 0Material as template and trying to load data. I am getting invalid error- Version '7704132' is not valid RSDMD No194. Can anyone please let me know how to over come this issue. Should I include any routine in the data source or rules level. I am in BI 7.0.
Thanks.

Hi,
Use the FM CONVERSION_EXIT_ALPHA_INPUT to convert the value into Internal format .Use this FM in the Transformations (field mapping).
Search the forum with CONVERSION_EXIT_ALPHA_INPUT for more information on this.
Regards,
Anil Kumar Sharma .P

Errors during Loading TD from Flat file to PSA

Similar Messages

Maybe you are looking for