"Errors exist for one or more children."

I am facing this error when compiling the orchestration.(#error "Errors exist for one or more children.") I manually then delete the line from the orchestration editor and compile again. Why is this error coming and how to fix the same.
Note: I am facing this error from when I added a scope shape and removed the same.
Regards, Vivin.

Check out the below link, will give you some idea to deal with it :
Link
Link2

Similar Messages

Error: ORA-16778: redo transport error for one or more databases

Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>

This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry

Partner signup for Intune - your existing Microsoft Online Services account is not eligible for one or more partner benefits

When trying to add my Partner Intune rights to my Microsoft Online services account, I get the error;
Note: your existing Microsoft Online Services account is not eligible for one or more partner benefits.
Learn more
Does anybody know how to work around this?

Hi Mathew, this worked for me:
1. Sign into your Microsoft Partner account
2. Go to Orders & Benefits
3. Select Download Software
4. Click on Microsoft Online Services
5. Under MPN Online Services click Expand products
6. You should see Windows Intune click this
7. There is one final link to click
This should add you Intune licenses to your portal
Martin

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Error-No value given for one or more required parameters when using oleDBDa

Hello,
I have this sql statement and it works well, the Crystal Report gives good result when I put concrete values like:
string comstring = "SELECT NOVI.GBR as gbrnov, NOVI.AB as abnov, NALOG1.DATA as datanov, Min(NALOG1.POCKM) AS MinOfPOCKM, Max(NALOG1.KRAJKM) AS MaxOfKRAJKM, (Max(NALOG1.KRAJKM)-Min(NALOG1.POCKM)) AS RAZLIKA, Count(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)) AS Gorivo, Avg(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)/100) AS potrosgor100km, Sum(IIf(([MAGACIN.SIFRA]='0993050' Or [MAGACIN.SIFRA]='0993051'),[MAGACIN.KOL],Null)) AS Motmaslo, Sum(IIf(([MAGACIN.SIFRA]='0992201'),[MAGACIN.KOL],Null)) AS Addblue, ([Addblue]/[Gorivo])100 AS Addbluegor, Sum(IIf(([MAGACIN.SIFRA]='0999001'),[MAGACIN.KOL],Null)) AS Antifriz, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA',''))) AS Zabeleska FROM (NALOG1 INNER JOIN NOVI ON NALOG1.GBRV = NOVI.GBR) INNER JOIN MAGACIN ON NOVI.GBR = MAGACIN.GBR where (((NOVI.GBR)>='1001' And (NOVI.GBR)<='1080') AND ( ((NOVI.AB)='AK') OR ((NOVI.AB)='AK') ) AND ((NALOG1.DATA)<=#10/31/2011# and (NALOG1.DATA)>=#10/31/2011#) ) GROUP BY NOVI.GBR, NOVI.AB, NALOG1.DATA, ([Addblue]/[Gorivo])100, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA','')))";
but when I use code like this :
string comstring = "SELECT NOVI.GBR as gbrnov, NOVI.AB as abnov, NALOG1.DATA as datanov, Min(NALOG1.POCKM) AS MinOfPOCKM, Max(NALOG1.KRAJKM) AS MaxOfKRAJKM, (Max(NALOG1.KRAJKM)-Min(NALOG1.POCKM)) AS RAZLIKA, Count(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)) AS Gorivo, Avg(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)/100) AS potrosgor100km, Sum(IIf(([MAGACIN.SIFRA]='0993050' Or [MAGACIN.SIFRA]='0993051'),[MAGACIN.KOL],Null)) AS Motmaslo, Sum(IIf(([MAGACIN.SIFRA]='0992201'),[MAGACIN.KOL],Null)) AS Addblue, ([Addblue]/[Gorivo])100 AS Addbluegor, Sum(IIf(([MAGACIN.SIFRA]='0999001'),[MAGACIN.KOL],Null)) AS Antifriz, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA',''))) AS Zabeleska FROM (NALOG1 INNER JOIN NOVI ON NALOG1.GBRV = NOVI.GBR) INNER JOIN MAGACIN ON NOVI.GBR = MAGACIN.GBR where (((NOVI.GBR)>=? And (NOVI.GBR)<=?) AND ( ((NOVI.AB)=?) OR ((NOVI.AB)=?) ) AND ((NALOG1.DATA)<=? and (NALOG1.DATA)>=?) ) GROUP BY NOVI.GBR, NOVI.AB, NALOG1.DATA, ([Addblue]/[Gorivo])100, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA','')))";
Edited by: Don Williams on Nov 23, 2011 7:22 AM

and the code after that:
command.CommandText = comstring;
            if (radioButton4.Checked == true)
                if (textBox1.Text == "")
                    button1.Enabled = false;
                    MessageBox.Show("Внесете гаражен број", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    textBox1.Focus();
                    command.Parameters.AddWithValue("@gbr1", textBox1.Text);
                    command.Parameters.AddWithValue("@gbr2", textBox1.Text);
            else if (radioButton5.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1001");
                command.Parameters.AddWithValue("@gbr2", "1080");
                button1.Enabled = true;
                textBox1.Text = "";
            else if (radioButton6.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1081");
                command.Parameters.AddWithValue("@gbr2", "1149");
                button1.Enabled = true;
                textBox1.Text = "";
            else if (radioButton7.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1001");
                command.Parameters.AddWithValue("@gbr2", "1149");
                button1.Enabled = true;
                textBox1.Text = "";
            else
                MessageBox.Show("Немате избрано гаражен број или тип на автобус.", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                button1.Enabled = false;
            if (checkBox1.Checked == true && checkBox2.Checked==true)
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = true;
            else if ((checkBox1.Checked == true) && (checkBox2.Checked == false))
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "AK");
                button1.Enabled = true;
            else if (checkBox2.Checked == true )
                command.Parameters.AddWithValue("@ab1", "GP");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = true;
            else
                MessageBox.Show("Немате избрано автобаза.", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = false;
            command.Parameters.AddWithValue("@data1", dateTimePicker1.Value.Date);
            command.Parameters.AddWithValue("@data2", dateTimePicker2.Value.Date);
             DataSet2 dataSet2=new DataSet2();
             OleDbDataAdapter oleDBDataAdapter1 = new OleDbDataAdapter();
            oleDBDataAdapter1.SelectCommand=command;
                dataSet2.Clear();
                oleDBDataAdapter1.Fill(dataSet2,"Tabela");
                if (dataSet2.Tabela.Count == 0)
                    MessageBox.Show("Nema podatoci za toj period");
                ReportDocument cryRpt = new ReportDocument();
                cryRpt.Load(@"C:\Potrosuvacka-Pregledi\Potrosuvacka-Pregledi\CrystalReport6.rpt");
            cryRpt.PrintOptions.PaperOrientation = CrystalDecisions.Shared.PaperOrientation.Landscape;
                cryRpt.SetDataSource(dataSet2);
                crystalReportViewer1.DisplayToolbar=true;
            crystalReportViewer1.ReportSource = cryRpt;
            crystalReportViewer1.Refresh();
                conn.Close();
I get an error:
"No value given for one or more required parameters."
Could anybody help me please?
Thank you in advance.
Edited by: nelpet06 on Nov 23, 2011 9:30 AM

Cannot convert character sets for one or more characters Error message

Hello,
I am getting this error message "Cannot convert character sets for one or more characters" when i try to transfer the data from Application server file as CSV to PSA.
Using T-code AL11
Under SAP Directory I open my file I can able to see all contents of my file right?
But i can't able to see all my data because of this I am getting ths error message?
I am loading Master data attribute
Is there any limitation on record length?
Please share your thought..
Thansk

Which length should not exceed 60.
When i load the same file from local workstation I can able to load no error message
Why I am getting if i load same file from application server?
Thanks

Error: ORA-16778: redo transport error for one or more databases.   please help.

Hello everyone :
I can't switchover to primary. following is error and information.
RHEL 6.3 x86-64
Oracle database 11.2.0.3.0 Enterprise edition
Primary database = orclprmy
Standby database = orclstby1
##### /etc/hosts on orclstby1
[root@orclstby1 admin]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.50.211    ttprmy
192.168.50.212    orclstby1
### DG broker error
DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show configuration;
Configuration - TTDGConfig1
Protection Mode: MaxPerformance
Databases:
    orclstby1 - Primary database
      Error: ORA-16778: redo transport error for one or more databases
    orclprmy - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
########### listener.ora on orclstby1
[root@orclstby1 admin]# cat listener.ora
# listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME=orcl)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    (SID_DESC =
      (GLOBAL_DBNAME=orclstby1)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    (SID_DESC =
      (GLOBAL_DBNAME=orclstby1_DGMGRL)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
ADR_BASE_LISTENER = /u2/oracle
############## tnsnames.ora on orclstby1
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
orclprmy =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
orclprmy_DGMGRL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
orclstby1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
orclstby1_DGMGRL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
##### alert log on orclstby1.
Fatal NI connect error 12504, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.3.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 06-SEP-2013 13:19:55
Tracing not turned on.
Tns error struct:
    ns main err code: 12564
TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
There is problem in alert log.
In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
Is any idea?
Thanks for help.
消息编辑者为：user4914135

#### on primary database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME            STATUS    TARGET ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1   VALID     LOCAL   ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclprmy
LOG_ARCHIVE_DEST_2   VALID     REMOTE LGWR       PENDING ALL_LOGFILES    PRIMARY_ROLE orclstby1
LOG_ARCHIVE_DEST_3   INACTIVE LOCAL   ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
#### on standby database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME            STATUS    TARGET ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1   VALID     PRIMARY ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclstby1
LOG_ARCHIVE_DEST_2   ERROR     STANDBY LGWR       PENDING ONLINE_LOGFILE PRIMARY_ROLE orclprmy
ORA-12504: TNS:listener was not given the SERVICE_NAME in
CONNECT_DATA
LOG_ARCHIVE_DEST_3   INACTIVE PRIMARY ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
#### log_archive_dest on primary database
SQL> show parameter log_archive_dest
NAME                                 TYPE        VALUE
log_archive_dest                     string
log_archive_dest_1                   string      location=/u3/arch/orcl vali
                                                 d_for=(ALL_LOGFILES,ALL_ROLES)
                                                  db_unique_name=orclprmy
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
log_archive_dest_2                   string      service="orclstby1", LGWR ASYNC
                                                 NOAFFIRM delay=0 optional comp
                                                 ression=disable max_failure=0
                                                 max_connections=1 reopen=300 d
                                                 b_unique_name="orclstby1" net_ti
                                                 meout=30, valid_for=(all_logfi
                                                 les,primary_role)
log_archive_dest_20                  string
log_archive_dest_21                  string
log_archive_dest_22                  string
#### log_archive_dest on standby database
SQL> show parameter log_archive_dest
NAME                                 TYPE        VALUE
log_archive_dest                     string
log_archive_dest_1                   string      location=/u3/arch/orclstby1 vali
                                                 d_for=(ALL_LOGFILES,ALL_ROLES)
                                                  db_unique_name=orclstby1
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
log_archive_dest_2                   string      service=orclprmy ASYNC valid_for
                                                 =(ONLINE_LOGFILE,PRIMARY_ROLE)
                                                  db_unique_name=orclprmy
log_archive_dest_20                  string
log_archive_dest_21                  string
log_archive_dest_22                  string
log_archive_dest_23                  string
log_archive_dest_24                  string
log_archive_dest_25                  string
#### spfile on standby database
</u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
orcl.__db_cache_size=1040187392
orclstby1.__db_cache_size=1090519040
orcl.__java_pool_size=16777216
orclstby1.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orclstby1.__large_pool_size=16777216
orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=536870912
orclstby1.__pga_aggregate_target=536870912
orcl.__sga_target=1610612736
orclstby1.__sga_target=161061273
orcl.__shared_io_pool_size=0
orclstby1.__shared_io_pool_size=0
orcl.__shared_pool_size=503316480
orclstby1.__shared_pool_size=469762048
orcl.__streams_pool_size=16777216
orclstby1.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_file_nam
e_convert='orcl','orclstby1'
*.db_name='orcl'
*.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=5218762752
*.db_unique_name='orclstby1'
*.deferred_segment_creation=FALSE
*.dg_broker_start=TRUE
*.diagnostic_dest='/u2/oracle'
*.fal_client='orclstby1'
*.fal_server='orclprmy'
*.log_archive_config='dg_config=(orclprmy,orclstby1)'
*.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
*.log_archive_dest_2='ser
vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
*.log_archive_dest_state_2='ENABLE'
orcl.log_archive_format='orcl_%t_%s_%r.arc'
*.log_archive_format='orclstby1_%t_%s_%r.arc'
orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_archive_min_succeed_dest=1
orcl.log_archive_trace=0
orclstby1.log_archive_trace=0
*.log_file_name_convert='orcl','orclstby1'
*.open_cursors=300
*.pga_aggregate_target=536870912
*.processes=
1500
*.remote_login_passwordfile='EXCLUSIVE'
*.sessions=1655
*.sga_target=1610612736
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
</u2/oracle/product/11.2.0/dbhome_1/dbs>
Thank you for your help.

Rikaichan (add-on) doesn't work at my office. It gives this error "Javascript application: the index for one or more dictionaries needs to be created. This may take a while on slower computers". And then the PC freezes. What should I do?

I'm using Firefox 3.6.17, and have installed Rikaichan 2.02. Once I've installed the Japanese-English dictionary, I then click on Rikaichan to get it started, and it always gives a "Javascript Application" error:
'''"The index for one or more dictionaries needs to be created. This may take a while on slower computers"'''
Rikaichan always works fine on my laptop, but I just can't seem to install it properly at work. Is there some sort of office security screwing it up?

venicespent,
Boot into your Mavericks Recovery partition by hold down the command and R keys whilst booting. You'll see a screen that looks like this:
Click on the Disk Utility item to open Disk Utility. You should see your boot drive (usually named "Macintosh HD" unless you've changed it) in the column on the left of the screen. Select your boot partition and click on the "Verify" button. Let your Mac do it's thing - if you get green text telling you that everything seems to be OK, then your disk should not be damaged. If, however, you get red text telling you that the disk needs to be repaired, click on the "Repair" button. If the disk can be repaired, you should be good to go. If the disk cannot be repaired then the drive is damaged.
But before you do anything, make certain that you have backups!!!
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display

Item cost not found for one or more items - Inventory Posting

Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
Sean

Hi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean

Exchange 2010 SP2 RU2 - Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases

We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
    get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
    "I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
tests using troubleshooting scripts find no issues with search indexer,
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
    Get-EventLog : No matches found
    At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
    + $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
    -eq $msftesqlCrashEventId}
        + CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
        + FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
    Name IsDeadLocked CatalogStatusArray
    SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
    Server Database ServerGuid ResultFound SearchTimeInSeconds Error
    SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.

Hi IAMChrisL,
Any updates?
Frank Wang
TechNet Community Support

Problem in material extension- material is blocked for one or more plant

Hi,
I am extending material from one plant to another plant but when i reach in accounting 1 deta system shows error material is blocked for one or more plant.
Message no. M3562
Diagnosis
You wanted to make a change in the material master record which requires that the master record is blocked in all plants.
A change of this kind includes, for example, the entry of a valuation type that allows single batch valuation, or changing of the batch management requirement if the batches have a cross-plant definition in your system.
System Response
The change required cannot be made until the material can be blocked by the current transaction in all plants
How to solve it. Please guide me..

Hi Nitesh,
From the error desc it appears you are making a change that has an impact on more than one plant. probably while extending you are trying to change a value for the new plant where the extension is being made.
make sure if this change is needed, its blocked in the plants for the field which has a diff value. you might have to modify the value of the field causing diff across the other plants also to make it uniform.
regards
sadhu kishore

Flat File Load Issue - Cannot convert character sets for one or more charac

We have recently upgraded our production BW system to SPS 17 (BW SP19)
and we have issues loading flat files (contain Chinese, Japanese and
Korean characters) which worked fine before the upgrade. The Asian
languages appear as invalid characters (garbled) as we can see in PSA. The Character Set
Settings was previously set as Default Setting and it worked fine until
the upgrade abd we referred to note 1130965 and with the code page 1100
the load went through (without the Cannot convert character sets for one or more characters error) however the Asian language characters will appear
as invalid characters. We tried all the code pages suggested in the note e.g.
4102, 4103 etc on the info packages but it did not work. Note that the
flat files are encoded in UTF-8.

I checked lower case option for all IO
When i checked the PSA failed log no of records processed is "0 of 0" my question is with out processing single record system is througing this error message.
When i use same file loading from local workstation no error message
I am thinking when I FTP the file from AS/400 to BI Application Server(Linex) some invalid characters are adding but how can we track that invalid char?
Gurus please share your thoughts on this I will assign full points.
Thanks,

Cannot convert character sets for one or more characters

Hello,
Issue:
Source File: Test.csv
Source file dropped on application server as csv file via FTP
Total records in csv file 102396
I can able to load only 38,000 records after that I am getting error message " convert character sets for one or more characters" while loading into PSA .
If i load same csv file from local workstation I am not getting any error message I can able to load total 102396 records.
I am guessing while FTP the file into Application server some invalid codes adding?
But I am FTP 7 files, out of 7 I am unable to load only 1 file.
Anybody have faced this kind of problem please share with me I will assign full points
Thanks

I checked lower case option for all IO
When i checked the PSA failed log no of records processed is "0 of 0" my question is with out processing single record system is througing this error message.
When i use same file loading from local workstation no error message
I am thinking when I FTP the file from AS/400 to BI Application Server(Linex) some invalid characters are adding but how can we track that invalid char?
Gurus please share your thoughts on this I will assign full points.
Thanks,

Convert character sets for one or more characters

Hello,
Issue:
Source File: Test.csv
Source file dropped on application server as csv file via FTP
Total records in csv file 102396
while loading into PSA I can able to load only 38,000 records after that I am getting error message " convert character sets for one or more characters" .
If i load same csv file from local workstation I am not getting any error message I can able to load total 102396 records.
Anybody have faced this kind of problem please share with me I will assign full points
Thanks

Hi,
check
Flatfile Issue
Regards,
Arek

Connection Pool - unable to establish connection for one or more OC4J inst.

Hi.
I'm using Oracle JDeveloper 10.1.3.1 to develop some app. Database is Oracle XE 10.2.0. Application server is Oracle Aplication Server 10.1.3.1
After create a needed code, I' v tried establish Connection Pool. When I' v tested connection, next errors was occurred:
Unable to establish connection for one or more OC4J instances<<
Home on admin.FRIEND-6843859F - Failed due to error: "Exception occurred testing connection. Exception: java.sql.SQLException: invalid arguments in call."<<"FRIEND-6843859F " is Computer name where Application server is installed.
--Database is started.
--App.server processes are started.
How can I solve this problem?
Thanx

If you are using ADF "BC" Jdev will not support more than one connection
I've tryied and always gives a errors.

"Errors exist for one or more children."

Similar Messages

Maybe you are looking for