Errors i am getting while rebulding my project
i have imported one project from the zip file, and at the time of rebuilding the project, i am getting
Error
Missing required library: 'C:Documents and Settings/vipul/.dtc/LocalDevelopment/DCs/sap.com/km/jars/_comp/gen/default/public/kmjars/lib/java/bc.rf.framework_api.jar'. LocalDevelopmentemployeeseparationsap.com Build path
like that i am getting around 63 errors,
what would be the possible cause of error, please explain
Bala
Hi,
The same discussed in the following thread
Export/Import Web Dynpro project
and also
http://help.sap.com/saphelp_nw04s/helpdata/en/55/34c83ecedc636be10000000a114084/frameset.htm
still not solved then try
right click on the component and check for the options repairs or change class path structure.
PradeeP
Similar Messages
-
"HKONT is empty" error message is getting while doing MIRO
Hi Gurus
While i am doing MIRO, i am getting the error message of "HKONT is empty". What is this error & how can i resolve and where can i check this G/L Account belongs to what?
Thanks in adv,
Regards
BADRIStarting in release 4.6C, MM delivers complete tax information to
the tax modules. But we are performing some consistency checks. Part of those checks is the test if HKONT is empty and
T007B-STAZF has not been filled, otherwise we expect to get a correct
account. There are no further issues in dealing with the flag.
The error message may occur because of wrong customizing in the
transactions FTXP and OBCN for non-deductible tax:
1) FTXP: for the used tax code, please check / set with the button
"accounts" the accounts.
2) OBCN: please check for all the account keys of FTXP if some of
them have the value 3 for the setting "Posting indicator". In that
case, please check / set the flag 'not deductible' (= T007B-STAZF).
Please refer to attached note
377271 MR1M, MIRO: error FF804 'HKONT is blank'
Please use transaction FS02 to set the tax relevancy on the control datatab for the G/L Account in question. Please see the solution in point
2 of SAP Note 395919 for more detail.
395919 MIRO, MR1M: Error messages when calculating tax
Please also, review the standard system design as outlined
in Note 39591. In the standard system design, must have the accounts
set as relevant to tax. -
I have attached the error I am getting while copying the GL accounts
I am getting the below error while copying the GL accounts from Co. Code 0001 and 1000 to Co. Codes created by me.
" " is not a valid language
Message no. TK295
Diagnosis
A key with the language " " was specified for table "SKAS". This is not a valid language.
This applied to field "SPRAS"
System response
The system rejects the key.
Procedure
Enter a valid language. This is usually the language you logged on in.
You logged on in language "EN"
Table T002 contains a list of valid languages.
Please help.Hi Prasad,
Thanks for your help.
For some of the G/L accounts in COA INT the language is P.
I feel those needs to be changed to E to resolve the issue.
Could you please help on how to change the language key for the G/L accounts in COA INT from P to E?
OR
if you know any basis professional, could you please forward this issue to him for resolution?
Regards
Vikash -
Audio error after publishing or while previewing a project
I have a very large project with branching. When either previewing or publishing (to flash), I have a section of slides that do not play their own audio, but rather, play audio from another part of the course. This happens for 5 slides in a row, the project seems to right itself.
When I preview the affected slides alone, they play as expected and I don't have any other audio files attached to any elements on the page. The minute I try to view the entire project seems to be when the error comes up.
I am using Captivate 4, and the audio is created using the text-to-speech option. I've cleared out all unused audio files
Thanks for your help!Thanks for the reply!
I already had some gap between the start of the slide and the audio files. I went ahead and made the audio start after the slide had been going .5 seconds, but unfortunately I still have the same problem.
I've recreated the slides and deleted the ones that were giving me problems and the problem is now fixed. That wouldn't have been fun if it were many more slides to rebuild. -
Error i am getting while using the evaluate function in a reprot
hi all,
can't we use semicolon in Evaluate function
Semicolon is not allowed in Evaluate Functions without proper escape i.e. \; (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT case when 1=0 then USER_INFORMATION.USERNAME else EVALUATE(''my_func(%1,%2,%3)'',''aa'',''bb'',''Hindu;All Natl and Local'') end FROM xxx_xxx_xx')}
SQL Issued: SELECT case when 1=0 then USER_INFORMATION.USERNAME else EVALUATE('my_func(%1,%2,%3)','aa','bb','Hindu;All Natl and Local') end FROM xxx_yyy
ThnxHi,
Try this
EVALUATE('my_func(%1,%2,%3)','aa','bb','Hindu\;All Natl and Local')Without any proper escape character '\' obiee(EVALUATE function) will not accept ';'
Thanks,
Saichand.v -
AppBuilder :Getting Error While importing the Project to Eclipse IDE ?
Hi Experts,
While importing the project from AppBuilder to Eclipse IDE following error i'm getting,
Error : Cordova Activity Cannot be resolved to a type,
Can someone help me to solve this.
Thanks in advance,
Vamsi K.Thanks ,I have been gone through <Projection Type='System.WorkItem.Incident.ProjectionType">.
Now i am getting many errors while importing data.I have customized fields in servicedesk and i have created same fields in scsm incident form.When i am imported
data i am getting below error.
Please let me know how can i import customized feilds data to SCSM without issues.
Regards, H@ri -
Error while opening the projects in cProjects
Hi,
I am encountering a problem while opening the already created projects in cProjects. The error type is
The following error text was processed in the system DVR : Type conflict when calling a function module.
The error occurred on the application server and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_DPR_OBL_PROXY~LOAD_OBJECT_LINKS of program CL_DPR_OLR3_EASYDMS===========CP
Method: IF_CGPL_ASSIGNMENT_PERSISTENCY~FETCH of program CL_DPR_OBL_PERSISTENCY========CP
Method: LOAD of program CL_CGPL_ASSIGNMENTS===========CP
Method: LOAD of program CL_CGPL_PROJECTS==============CP
Method: LOAD of program CL_CGPL_ENTITIES==============CP
Method: LOAD_PROJECTS of program CL_DPR_APPL_OBJECT_MANAGER====CP
Method: LOAD_OBJECTS_OF_OBJECT_TYPE of program CL_DPR_BAPI_SERVICES==========CP
I request you all to help me out solve this issue if you know.
Regards
Nachimuthu RameshHi Vivek,
Thanks for responding to my question. I made changes as per your suggestion and now I am not getting the error message whatever I forwarded. But I am getting another error message 'You require authorization to display Project`. Pls help me out to solve this issue.
Thanking you
Regards,
N.Ramesh -
Error while deploying import project
I am getting the following error while deploying the import project.
I dont get any error while importing assets from the xls sheet. it successfully imports all the assets.
It only gives error when i try to deploy this project.
I have checked all the assets and i dont see any id as null in the data that i m importing.
09:28:31,978 ERROR [DeploymentManager] item = repositoryMarker:mark5621005 cause = CONTAINER:atg.deployment.DistributedDeploymentException; SOURCE:atg.repository.Repos
itoryException: Ids cannot be null
at atg.deployment.repository.RepositoryWorkerThread.processMarkerForAddUpdatePhase(RepositoryWorkerThread.java:274)
at atg.deployment.DeploymentWorkerThread.processMarkerPhase(DeploymentWorkerThread.java:562)
at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:335)
message = Deployment Failed time = Wed Jul 24 09:28:31 PDT 2013 atg.deployment.DeploymentFailure@13738c4f
CAUGHT AT:
CONTAINER:atg.deployment.DistributedDeploymentException; SOURCE:atg.repository.RepositoryException: Ids cannot be null
at atg.deployment.repository.RepositoryWorkerThread.processMarkerForAddUpdatePhase(RepositoryWorkerThread.java:274)
at atg.deployment.DeploymentWorkerThread.processMarkerPhase(DeploymentWorkerThread.java:562)
at atg.deployment.DeploymentWorkerThread.run(DeploymentWorkerThread.java:335)
Caused by: atg.repository.RepositoryException: Ids cannot be null
at atg.adapter.version.VersionRepository.getItem(VersionRepository.java:903)
at atg.deployment.repository.RepositoryWorkerThread.getSourceItem(RepositoryWorkerThread.java:995)
at atg.deployment.repository.RepositoryWorkerThread.deployItem(RepositoryWorkerThread.java:1024)
at atg.deployment.repository.RepositoryWorkerThread.processMarkerForAddUpdatePhase(RepositoryWorkerThread.java:262)
... 2 moreHi,
It looks like the mapping is either wrong or some conflicts between pub and target database. What is the id-column-name for this item? Can you also turn on the debugs for that repository while deploying and get the insert statement that is throwing the error? It would be helpful if you can also share the item definition. -
Error While saving the project
Hai sapians,
I am using the solution manager for the first time.I am getting the error -Project save cancelled(Message no. SPROJECT345) While saving the project in the T-code-solar_project_admin. What could be the problem ?
Thanks
Sukumaran.EHi,
Except this I am not getting any long text. After pressing saving I am getting a POPUP asking for Enhancement (/KWCUST/) Release(620) After this I am Getting the error and there is no other text.
But in the General Data tab I am not able to give Project Description (It gives error message Authorization Check Error Message no. SOLAR409).
Thanks
Sukumaran.E -
Error while deploying the project to ESB and deleting the services in ESB
Hi,
I am tiring to deploy a project to ESB, but I am getting this exception.
error code: 0 : 10
summary: An unhandled exception has been thrown in the ESB system. The exception reported is: "javax.transaction.RollbackException: Timed out
at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:582)
at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:244)
at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:130)
at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:433)
at oracle.tip.esb.console.XMLConsoleManagerImpl.commit(Unknown Source)
at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.deploy(Unknown Source)
at oracle.tip.esb.configuration.deployment.DeploymentServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Fix: -
In the earlier thread
Error while deploying the project to ESB
I was told to do some corrections. I did that and also I have bounced the OPMN. It worked for me.
But again I am getting the same error, and I did this for the second time. But it didn’t work now.
And I also have one more problem. I am not able to delete the existing services in the ESB console. When I try to delete the services I am getting the same error.
I even checked the LOGS. The last three error payloads I see are
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-04-03T13:15:30.846-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh37.arrow.com</HOST_ID>
<HOST_NWADDR>192.168.226.25</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>26</THREAD_ID>
<USER_ID>soauser</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.226.25:62472:1175620406177:7</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: ORABPEL-11207
IO Failure in translator.
IO failure because the Inbound XSD translator failed to DOM Parse InputStream .
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[ORABPEL-11207
IO Failure in translator.
IO failure because the Inbound XSD translator failed to DOM Parse InputStream .
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
at oracle.tip.pc.services.translation.xlators.xsd.XSDTranslator.translateFromNative(XSDTranslator.java:136)
at oracle.tip.adapter.mq.inbound.MessageProcessor.translateMessage(MessageProcessor.java:377)
at oracle.tip.adapter.mq.inbound.MessageProcessor.processMessage(MessageProcessor.java:217)
at oracle.tip.adapter.mq.inbound.MessageProcessor.run(MessageProcessor.java:165)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.io.UTFDataFormatException: Invalid UTF8 encoding.
at oracle.xml.parser.v2.XMLUTF8Reader.checkUTF8Byte(XMLUTF8Reader.java:160)
at oracle.xml.parser.v2.XMLUTF8Reader.readUTF8Char(XMLUTF8Reader.java:187)
at oracle.xml.parser.v2.XMLUTF8Reader.fillBuffer(XMLUTF8Reader.java:120)
at oracle.xml.parser.v2.XMLByteReader.saveBuffer(XMLByteReader.java:450)
at oracle.xml.parser.v2.XMLReader.fillBuffer(XMLReader.java:2488)
at oracle.xml.parser.v2.XMLReader.tryRead(XMLReader.java:1089)
at oracle.xml.parser.v2.XMLReader.scanXMLDecl(XMLReader.java:3047)
at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:521)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:287)
at oracle.tip.pc.services.translation.xlators.xsd.XSDTranslator.translateFromNative(XSDTranslator.java:134)
... 8 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-04-03T13:15:30.850-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh37.arrow.com</HOST_ID>
<HOST_NWADDR>192.168.226.25</HOST_NWADDR>
<MODULE_ID>esb.monitor.manager</MODULE_ID>
<THREAD_ID>29</THREAD_ID>
<USER_ID>soauser</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.226.25:62472:1175620406325:10</UNIQUE_ID><SEQ>87</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Activity monitor manager received an unexpected exception while processing the activity messages. Due to the error "ORA-01653: unable to extend table ORAESB.ESB_FAULTED_INSTANCE by 8 in tablespace USERS
", the activity message could not be stored.
</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[oracle.tip.esb.monitor.MonitorException: Due to the error "ORA-01653: unable to extend table ORAESB.ESB_FAULTED_INSTANCE by 8 in tablespace USERS
", the activity message could not be stored.
at oracle.tip.esb.monitor.manager.database.AbstractFaultPersister.persist(Unknown Source)
at oracle.tip.esb.monitor.manager.database.DBActivityMessageStore.persistMessage(Unknown Source)
at oracle.tip.esb.monitor.manager.database.DBActivityMessageStore.store(Unknown Source)
at oracle.tip.esb.monitor.manager.ActivityMessageManager.handleMessage(Unknown Source)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(Unknown Source)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(Unknown Source)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: ORA-01653: unable to extend table ORAESB.ESB_FAULTED_INSTANCE by 8 in tablespace USERS
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1161)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3074)
at oracle.oc4j.sql.proxy.PreparedStatementBCELProxy.executeUpdate(PreparedStatementBCELProxy.java:37)
at oracle.tip.esb.monitor.manager.database.oracle.OracleFaultPersister.persist(Unknown Source)
... 11 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-04-03T13:15:30.853-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh37.arrow.com</HOST_ID>
<HOST_NWADDR>192.168.226.25</HOST_NWADDR>
<MODULE_ID>esb.server.dispatch.agent</MODULE_ID>
<THREAD_ID>29</THREAD_ID>
<USER_ID>soauser</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.226.25:62472:1175620406325:10</UNIQUE_ID><SEQ>87</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Failed to process deferred message</MSG_TEXT>
<SUPPL_DETAIL>oracle.tip.esb.server.common.exceptions.BusinessEventRejectionException: Error occured while handling monitor message dequeued from monitor topic. Message text is "<activityMessages><activityMessage order='0' type='2'><flowId>ECA97010E20611DBBFEBA191573C68FA</flowId><subFlowId>1175620530577</subFlowId><source>379D02F0DD5F11DBBF92D52E11DE817E</source><sourceQName>Demo_Inbound_Queue_to_DB.Demo_Inbound_Queue_to_DB_From_Queue</sourceQName><timestamp>1175620530577</timestamp><operationGUID>379E8990DD5F11DBBF92D52E11DE817E</operationGUID><operationQName>Demo_Inbound_Queue_to_DB.Demo_Inbound_Queue_to_DB_From_Queue_RS.Dequeue</operationQName><errorMessage><![CDATA[java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
]]></errorMessage><exception><![CDATA[ORABPEL-13004
java.util.MissingResourceException
java.util.MissingResourceException
java.util.MissingResourceException
at oracle.tip.adapter.mq.inbound.MessageProcessor.translateMessage(MessageProcessor.java:388)
at oracle.tip.adapter.mq.inbound.MessageProcessor.processMessage(MessageProcessor.java:217)
at oracle.tip.adapter.mq.inbound.MessageProcessor.run(MessageProcessor.java:165)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
]]></exception><inPayload><![CDATA[ediExtract850Header 4085537732 8670SSD23962-29 008675989102007032220070322
[b]Can any one please help me.
Thanks
Rao.Hi Bastiaan,
Thanks for the reply. I have asked my DBA analyst to work on this. He has increased the table space. Now if I try to deploy the projects to ESB the following error is show.
Error 1:
error code: 1000 : 5
summary: /rh37/u01/app/soa/10.1.3.1/SOA/integration/esb/oraesb/deploy/OAGISApp_OAGIS.zip (Read-only file system)
Fix: Contact Oracle Support
Error 2:
Entity Deployment Failed
error code: 0 : 10
summary: An unhandled exception has been thrown in the ESB system. The exception reported is:
"oracle.tip.esb.infra.exception.ESBRuntimeException: An unhandled exception has been thrown in the ESB system. The exception
reported is: "java.lang.NullPointerException
at oracle.tip.esb.console.CacheManager.updateService(Unknown Source)
at oracle.tip.esb.console.CacheManager.replaceEntity(Unknown Source)
at oracle.tip.esb.console.XMLConsoleManagerImpl.updateServiceInRepository(Unknown Source)
at oracle.tip.esb.console.XMLConsoleManagerImpl.updateServiceFromElement(Unknown Source)
at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.createEntity(Unknown Source)
at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.createServices(Unknown Source)
at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.deploy(Unknown Source)
at oracle.tip.esb.configuration.deployment.DeploymentServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
at oracle.tip.esb.console.XMLConsoleManagerImpl.updateServiceInRepository(Unknown Source)
at oracle.tip.esb.console.XMLConsoleManagerImpl.updateServiceFromElement(Unknown Source)
at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.createEntity(Unknown Source)
at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.createServices(Unknown Source)
at oracle.tip.esb.configuration.deployment.JDevDeploymentManager.deploy(Unknown Source)
at oracle.tip.esb.configuration.deployment.DeploymentServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at oracle.tip.esb.console.CacheManager.updateService(Unknown Source)
at oracle.tip.esb.console.CacheManager.replaceEntity(Unknown Source)
... 26 more
Fix: -
I tried to stop and start the OPMN. It didn't work. Can you please help me.
Thanks
Rao.
Message was edited by:
user552961 -
Getting Error in Crystal report While passing parameters (DB: MS ACCESS)
I have been trying to solve passing parameters in Crystal Reports.
What I have done is :
I added Crystal Reports to my project,
I connect to database using OLE DB (ADO) in database expert form (for your kind information; I did not create or add DataSet1.xsd file the Crystal Reports worked on below code with out parameters and I want report with parameter)
I added below piece of code on my form load event
When I try to pass parameter using .SetparameterValue function, report pop up with bunch of values BUT it does not filter with values which I want, Can anyone tell me that Am I missing something strange ? If yes please guide me
Here is images Links : Dropbox - Creport error
First Image shows my crystal report look, second image shows my DB connection and third one shows the error which I am getting while executing below code
Please help me, I've been trying to solve this problem for two months.
Public Class frmrptProducts
Private Sub frmrptProducts_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim cryRpt As New ReportDocument
Dim CrTables As Tables
Dim crtableLogoninfo As New TableLogOnInfo
Dim crConnectionInfo As New ConnectionInfo
'load report
cryRpt.Load(ReportPath & "CRproducts.rpt")
'parameters definition(if any) This is the part where I pass parameters
Dim ColourName As String = "White"
cryRpt.SetParameterValue("colours", ColourName)
'provide connection info. This is important and you can change it as per your db location
With crConnectionInfo
.ServerName = My.Application.Info.DirectoryPath.ToString() & "\data\db.mdb"
'.DatabaseName = ""
'.UserID = ""
.Password = ""
End With
CrTables = cryRpt.Database.Tables
For Each CrTable In CrTables
crtableLogoninfo = CrTable.LogOnInfo
crtableLogoninfo.ConnectionInfo = crConnectionInfo
CrTable.ApplyLogOnInfo(crtableLogoninfo)
Next
CRV.ReportSource = cryRpt
CRV.Refresh()
End SubHI Don,
Thanks for replied, I have come up with some different code and it worked,
Please visit this link and let me know if Am I able to get question resolved Pass more than two parameters to Crystal Reports from VB.NET -
What does "Error 10" mean? "An error occurred while loading your project. 10"
Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digiThanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet. -
Error while importing MS project into cProject
Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
SrikrishnaHi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna -
Error while releasing the project
Hi Friends,
While releasing the project I am getting the error :-
JV Object Type Is Required by JV Parameters for company code 1000.
What does it mean and how can I overcome this.?
Help will be rewarded and appreciated.
RegardsHi Amit,
go to CJ02 and open the project click on settlement rule tab(or press F7).
then u will go on one new screen. in that screen follow the following path
goto------->settlement parameter (or press F8)
then u will reach another screen there will be settlement profile
field . u select it as not for settlement.
then back on main project change sreen and save it
now u go in cj02 and release.
Regards,
Vivek Tripathi
Edited by: vivek tripathi on Sep 24, 2008 6:37 AM -
Error while approving the project contract
Hi,
While submitting the project contract for approval it's doesn't get approved and give below error in workflow
Error Message 1 ORA-06508: PL/SQL: could not find program unit being called in Package OKC_K_STS_CHG_ASMBLR_PVT Procedure acn_assemble
Error Message 2 Database operation Sign Contract failed.
Thanks,
HareshHaresh;
Similar issue mention at:
1441104.1 << not avaliable you need to log SR doc seems unavaliable
Insert procedure failed with error CSI_COUNTER_TEMPLATE_PUB.AUTOINSTANTIATE_COUNTERS API failed Could not associate a counter for this instance [ID 762533.1]
I suggest Rise SR
Regard
Helios
Maybe you are looking for
-
Can I uninstall Acrobat 9 after upgrading to Acrobat X
Both versions appear to be on my Mac and I keep getting installer pop-ups for updates to Acrobat 9.
-
I brought an iphone on last friday, i open the saran wrap. Now i want to return it, is there any return fee or free?
-
Hello, I am trying to create a typing test where I can track words-per-minute as part of a computer basics assessment CBT in Captivate 6. I am kinda lost so any help or direction would be awesome. Thank you!
-
How can you delete an old apple id from your phone
Although I have a new Apple ID, the old one keeps prompting for a password. How can I delete the old one?
-
Dear Experts I have installed TDS ADDON 4.9. It was running perfectly...But suddenly its giving an error which reads as follows: "Error code -121 Tds addon seems disconnected..plrase restart the addon." .......But the addon is connected Recently