Errors in Order...
We're creating a PO order in CRM using IDOC type ORDERS05. However, no matter how I manipulate the IDOC I can not get rid of the following error messages within the order:
Reference Object Message text
|----
Header data Sales Organiszation does not exist
Header data Enter a Distribution Center
Header data Enter Organization unit(Sales)
Header data Pricing data for partner 2000000485 not found
Header data Enter Employee responsible
However, as you can see from the WE19 extract I am populating the 'Employee Responsible' details, although I'm not entirely sure where it's getting the Sales Org and DC info from as there's nowhere that this can be entered within the IDOC.
E1EDK01 004
E1EDK14 00720
E1EDK14 00850000204
E1EDK14 012ZDOR
E1EDK03 00220070129
E1EDKA1 AG 2000000485
E1EDKA1 WE 2000000485
<b> E1EDKA1 ZM 010000041</b>
E1EDK02 001POGWC04
E1EDK18 001 0004
E1EDKT1 ZH02EN
The partner details are the same as used in a successful order (manually entered).
Does anyone know why I might be getting these error messages?.
Gary
Try entering the sales org , Org unit, dist channel, division, (sales office and sales group if they are present) in the IDoc and reprocess it. Check If the results are same.
Similar Messages
-
How to simulate a dml error in order to test try-catch code block inside a stored procedure
Hi,
What would be the easiest way to simulate a dml error in order to test a try catch block.
I would like to do it with a simple command from outside the stored procedure if possible.
I tried dropping the table that was updated but it hangs
Thanks,
DaniDropping the table that is the target of the procedure will give you an unpleasant surprise: the CATCH block will not fire. To wit, errors like missing tables can only be caught in outer scopes, but not in the procedure where the error occurs.
But you would add a fake constraint to a table which causes the update to fail. You need to do this in advance, not while running the procedure.
Erland Sommarskog, SQL Server MVP, [email protected] -
How to change P.O. duplication message type from warning to error for Order
Hi Experts,
I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate. I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType). If this BAdI is not good way, is there other way? and how to please?
Please advise / help..
Thanks, JinThanks Easwer for your help.
The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much. I need to learn where I can see the system status of the template, i.e. I1034 (Order Template) or Order or Quotation .....? if I need to filter out Quotation, I can easily do it in the BAdI. Could you please provide me more details?
Thanks again, Jin
Thanks again, Jin -
MIGO error 'Purchase Order does not contain a confirmation control key'
Hi,
while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
Still why this message coming, what setting would be bringing this message
Please clarityHi,
Until the installation of Note 589422 (with SP SAPKH46C43) you could due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.
This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
589422 Several inbound deliveries can be created with MIGO :
"Implement the program correction.
With Transaction SE91 create message M7394 with the message text:
Purchase order & & does not contain a confirmation control key".
After you implemented this correction, when you want to create an
inbound delivery with Transaction MB01 or MIGO or with
BAPI_GOODSMVT_CREATE and if the purchase order does not contain a
confirmation control key the system displays error message M7394
"Purchase order & & does not contain a confirmation control key".
Hope this can explain the error you met.
Regards,
Mauro -
APP giving error "Internal order is in CRTD Active"
Hi All,
We are facing a strange issue.
We have a PO for which a Down Payment request was raised. An internal order is assigned to PO which was in Created status. When we tried to pay the down payment using APP, the proposal ended up with error "Internal Order 12345 is in CRTD Act".
I am confused as to why the APP is looking for Internal order status when it has nothing to do with it.
COuld you please share your thoughts, is I am missing some logiv to understand this.
Regards,
MGHello Trinath and Rajneesh,
Thanks for sharing your views. But my question was, why is the system lookinf doe internal order at the timw when i am trying to pay the advance. Internal order has nothing to do with the advance payment to the vendor.
Advance payment is more of a Balance sheet transaction and not a P&L account transaction.
I know i am missing somehitng here, but I would like to Understand that missing link.
Regards,
mg -
CIF error "Planned order Locked"
Hi,
in the cif queue manager, i had a queue(R3 Inbound) with error " planned order locked", when i reactivated the queue it disappeared.
but what could be the cause of the error. please share your ideas,
Thanks,
DhanushHi Dhanush,
There are multiple causes for this in which you need
to check and fix the exact cause
1) Sequential planning jobs in which one job either in
foreground or background clauses or overlaps with
the other one leading this error.
2) Check SAP note 332881
3) Check in sm12 any user lock or application lock is
found during this time interval
4) Run /sapapo/ccr for planned orders and check
any errors noticed after iteration
5) If you know for a location product in which lock is
observed, then delete the planned order and try
recreating it and check the error whether repeating.
If working good, then you can delete all orders and
regenerate it
Regards
R. Senthil Mareeswaran. -
Error : Purchase Order Response for Service items Different
Hi ,
We are getting Error : Purchase Order Response for Service items Different , when creating the PO in SRM 5.0. what must be the reason ?
Thanks & Regards,Problem solved
-
Error message "order currently being processed" in print order thru IW37N
Hi,
I am getting error messages "order currently being proceesed by same user" & " material reservation for order being processed" when i am trying to take print of work order using t-code IW37N putting multiple orders. But I am able to take print then also. I am not able to understand why this message is coming before print comes out..I have not opened any more same transaction also on the screen.
I am getting this error message very frequently for other open orders also.
Plse suggest what can be the reason ?
Regards,
VivekApart from standard shop papers selection 2010, 2020, 2030 if you define new like 3030 or 4040 and assigned with any custom program to print server system will issue this message.
Please check the standard config via transaction OIDF
Thanks
S.N -
URGENT
Hi there.
I need to confirm orders thru a BAPI.
I think I can confirm orders with BAPI_PRODORDCONF_CREATE_HDR, however when I test on transaction BAPI (Tab --> Tools Single Test), and I enter the following data:
Orderid> 1000080 postg_data> 18.03.2008 yield-->2
I'm getting always the same error:
RU051 - Orders of the order type YGD1 cannot be confirmed.
If I use transaction CORK to check/confirm orders on my controlling area, the order types available are YB02 and YGD1 and if I use the above mentioned BAPI for any of these order types (YB02/YGD1) I always get the same error message (RU051). Can you please inform what I'm doing wrong?
Kind Regards
ASantos
Edited by: Armando Santos on Mar 19, 2008 10:13 AM
Edited by: Armando Santos on Mar 19, 2008 3:29 PMHello Armando,
I am getting the same error while executing the BAPI. Could you please let me know how you resolved this error. -
Quoting form -- APP-236049: There is an error in order submission
Hello all,
In the Quote form, When i am trying to Submit a Quote (by clicking on 'Place Order' button in Quote form), it is throwing the error "APP-236049: There is an error in order submission"
Can any body help me in this.
Thank you,
Aushsymptom: The item specified is invalid or does not exist in the warehouse
you specified.
Please enter a valid item-warehouse combination
change: Note Role : Navigation -> Order management -> Order return -&
gt; Import order -> Correction.
cause: Internal ordered enabled flag not checked for the item
fix:
Check the internal order Enabled flag for the Item
Thanks
Naveen -
Error 'Enter order unit' in PIR Change using IDOC INFREC01
Hi All,
I am creating Purchase info record using IDOC INFREC01 and condition type using IDOC COND_A04. Its working fine in case of create PIR.
But If I pass PIR number in the upload with other fields to be chnaged then IDOC goes the in the error with status 51 , Error
"Enter Order unit". I am passing both base unit of measure (MEINS) and purchase order unit (LMEIN).
Kindly help find out the issue....!!!
Thanks in advance.Hi,
Check if you are passing the ISO code for unit of measure?
Also, Try debug using WE19 and find out where you are getting the error.
Hope it helps.
Sujay -
ME 51N Error msg order type doent match with account assignment.
Hi,
When I Execute ME 51N am facing an error ": For order type ZTWA ,Please use account assignment T"
Here my issue is whenever I press back ,Exit etc its promoting the same error i couldn't go back or exit the transaction.
One more thing i have enhanced ME51N using BADI - ZMMEI_PTP15_SERVICE.
Thanks in advanceNo idea what this application is but it's not Crystal Reports. If it's classic SAP product then post your question in one those forums. If it's a third party application please contact their support for assistance.
-
Error whille Order copy from 11i to R12: INV-RSV TARGET ROW EXISTS
Hi Gurus,
I have copied the order from 11i to R12 using OE_ORDER_PUB.process_order api.
Once the order is copied to R12, I am making the changes in 11i and now while the order is copying with the changes to R12 api is failing with the error message,
"A reservation record with the same item, organization, demand souce, and supply source already exists. Please use transfer reservation if you still want to make the changes."
Could you please help me out in resolving this issue.
Appreciate in Advance....Hi,
I am also same problem while creating the Sales Order.
Did you find any solution for this problem??
Thanks,
-- Eric. -
Error : Sales order 'create with Reference' to the contract
We have made a value contract. Now we are trying to make a Sales order 'create with Reference' to the contract.
when we do that, we am getting error 'copying material in any value contract item is not permitted'
Any help or directions would be greatly appreciated . We are on Ecc 6.0
RohitAs of now my value contract has just one material. so i dont need assortment module settings. right?
in VTAA settings are as follows
Target type: OR
Source type: ZK1
there is only on item category
Target item category: TAN
Source item category: WKN
Copying requirement : 301
update doc flow : 2
pricing type : C
cont item copy mode : A
DataT am using 151,102,002
There are no schedule line.
Rohit
Edited by: rohit kumar on May 15, 2008 7:36 PM -
Error"This order cannot be processed"is appearing while saving in QA32
Hi Experts,
When I am going for Qa32 transaction after UD code selection I did stock posting, while saving QA32 transaction one error is occuring "Order cannnot be processed".
For material inspn type 13 is active.
in the last financial year that is till mar-2008 it is been posted and saved successfully.
I doubt is there any year dependent parameter has to be set.
Thanks in advance
Rewards points to be given for suitable solution
Regards
Honyalhi
i think once the system try to post the material it will also generate accounting documents which is year dependent,kindly check it
regards
thyagarajan -
Error: Purchase order 4500000830 has no items in mb1b 541
Hi All,
I have created a Sub contracting Purchase Order with ITem Category L and Account Assignment E.
Now iam getting problem while issuing Stock to Subcontractor thru MB1B 541 Mov type. It is throwing error like Purchase order 4500000830 has no items.
Scenario is My client creates pos based on Sales order only. Now he want to Issue stock to Subcontractors based on sales order.
for this, I created Semifinished material, two raw components, Sales order for Semifinished material and maintained bom for semifinished.
Please go thru this and suggest.
Reg,
AshokHi,
Did u checked the link provided by me. As per SAP, it is not possible to post 541 stock of material provided to vendor in subcontracting with account assignment sales orde or project stock.
If you want to differentiate, use a separate storage location and transfer the stocks there. When you do the GR, the components issue happens directly from your storage location from sales order stock.
Since the components are not transferred to the "stock of material provided to vendor", we recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks and project stocks.
If you want to provide material from your stock,
For components that are managed in sales order stock or project stock, you can define whether the components are to be withdrawn directly from each sales order/project stock or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
in the MRP view of the material master record (MRP 4)
in the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types)
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from sales order stock or project stock.
Regards,
Ramakrishna
Maybe you are looking for
-
How do I stop icloud music from playing on my iPhone?
Currently I have no music on my iPhone as I primarily use spotify. The only music is from iCloud, some of it I don't even remember downloading in the first place. How can I stop this from downloading to my iPhone? Also, when I press the pause with my
-
Can i use a pre-intel as a node with an intel mac?
as the subject-title
-
Package javax.xml.soap does not exist
I have created a UDDI publish client where i am trying to publish a service. But when i try to compile my code it gives me the following error: package javax.xml.soap does not exist I know i am missing some jar in my classpath. But i don't know which
-
ISE profiler feed policies update changelog / release notes
I often notice that updated feed policies are skipped because the policy was canged by an admin (me). In the past the cisco provided policies weren't detailed enought to use them for secure authentication policies, so I modified/added a lot of them.
-
Error in posting IDOC ORDERS.ORDERS05
hi, dear all, i am getting error in posting IDOC ORDERS05. IDOC has arrived on system but with status 51, <b>it says: VKORG, VTWEG, SPART cannot be determined for customer , vendor</b> can you please tell me how to map above specified fields.They ar