ERRORS IN PORTAL WHEN DROPPING SCHEMA OWNER

I ran a PDK demo script and added 2 db packages to a schema in the portal repository. After running theses porlets, I decided to attempt to create my own. Prior to adding to the schema I wanted to clean out the old db packages. I thought the easy way would be to drop the user schema and recreate it clean. I attempted to drop the user schema by entering portal as orcladmin, clicking on navigator, then db objects, selected the schema I wanted to drop and it sat there for a few minutes and returned errors. I then opened SQLplus and dropped the user cascade. I noticed that the provider is still in the providers tab list, but can't delete it. I then attempted to re-create the schema using same name and I get additional errors in portal (see upload file: createrror2.jpg. I need to 1) drop the old provider and 2) recreate a new schema and provider that I will use for my portal/portlets.
Any suggestions.

Similar Messages

Error in Portal when checking MSS role, Help me how to solve?

In portal when I click on MSS I am getting an error like...
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/line_manager/com.sap.pct.erp.mss.bp_folder/com.sap.pct.erp.mss.roles/com.sap.pct.erp.mss.manager_self_service/com.sap.pct.erp.mss.manager/overview/com.sap.pct.erp.mss.work_overview/com.sap.pct.erp.mss.workoverview/com.sap.pct.erp.common.key_figure_monitor
Component Name : com.sap.portal.appintegrator.sap.WebDynpro
Exception in SAP Application Integrator occured: Unknown system alias. System Alias: 'SAP_ECC_Financials', User: 'SAPUSER', Reason: System Alias is not defined or permission denied for this user.
Exception id: 08:49_02/12/09_0001_63287050
See the details for the exception ID in the log file
How can I solve this?
Thanks,
Potru.

hi potru,
does the user 'SAPUSER' has assigned roles which has permission for system 'SAP_ECC_Financials'.
hope this will help resolve your issue.
thanks
arun

Getting Error in Portal while booking Time Sheet......

Hi All,
I am Getting Error in Portal when Booking Time sheet in Record working time Link. Getting below Error.
"Enter activity type only in conjunction with cost center"...I have entered data in KP26.
But for the same employee if i am booking the Efforts through R/3 (CAT2 Transaction) not getting the error. Successfully able to release the efforts it is storing in CATSDB.
PLease advice on this.
Regards,
Srinivas...

Hi Srinivas,
Please make sure that CATS data entry fields are marked as "input only".
Regards,
Dilek

Error: Cannot drop schema because it is being referenced by object

My database has a schema with the same name as a user (let's call it 'username'). This schema was not explicitly created. I want to drop the User 'username' but I have to drop the schema 'username' first; However, when I tried to do that I got the message...
"Cannot drop schema 'username' because it is being referenced by object 'vw_Inventory'
There is a view named 'vw_Inventory' but I don't see where it's referencing this schema, or any schema for that matter. Why would I get this error and how do I resolve it so I can drop the Schema and User?
Darrell H Burns

If a Schema has some objects in it, then you cannot drop that Schema until you remove all the objects out of it. You can change the schema owner
to another database principal and drop the user like,
Alter Authorization ON Schema::username TO DBO; Drop User username;
other option would be
Transfer the username schema objects to a different schema and drop username schema and user like.
Alter Schema DBO Transfer Username.[OBEJECTNAME] ;
--need to repeat this until you transfer all objects under this schema
Drop Schema username;
Drop User username;
Regards,
Praveen D'sa
MCITP - Database Administrator - 2008
sqlerrors

Error in the installation of portal when upgraded to SP14

Hi All,
I have installed SR1 (WAS,Portaland KM)and everything was working fine.
Then i tried to upgrade my server to SP14 and i have successfully upgraded WAS and portal to SP14 and it was working fine. But once i tried upgrading the KM it is throwing one error <b>"portal not found"</b>.When i checked for the version in Support Desk, it was showing me versions for WAS and portal, but not of KM. And my Content Management is working properly.
My OS is AIX 5.3
do help me. Its urgent
Regards
Rajeev.

Hi Rajeev,
are you sure you entered the correct logon / SID data?
In case you did is there anything specific on that issue to be found in the installation or default trace? If so, please post the relevant extracts.
Regards,
Thomas

I am getting a "Internal error occurred" message when I try to drag and drop common library items on to my canvas.

Hi,
I am getting a "Internal error occurred" message when I try to drag and drop common library items on to my canvas.
I have noticed that there are a number of these error messages and tried one solution of renaming a couple of files, I tried this and no joy.
Has any one go a solution for this before I purchase Fireworks please?
Kind regards,
Dave G

I can no longer get Firework CS6 to run - The program loads but without any toolbars/properties etc. It just has an 'AN INTERNAL ERROR OCCURRED' message that cannot be dismissed. The only way to close the program is via Task Manager (this is on a Window 8 PC). I have uninstalled the program, rebooted the PC and re-installed (several times) but it has not resolved the problem.
Fireworks is part of my Creative Cloud subscription and when reporting this via the live chat I was given the telephone number for Seagate Drives ??
Anybody got a solution?
Or, does anybody know how to open native Fireworks CS6 png files in Photoshop *but* with all the Fireworks layers preserved.
Think I'll also post this as a new topic as the problem is slightly different to SirBasher's issue.

Including Schema owner when generating DDL scripts

Designer 9.0.4.6
How do i set the option to include the schema owner prefix in the DDL scripts being generate ("generate server model from database") in design editor?

Generating from the DB Admin tab does not prefix the objects I am generating with the schema name. There isn't a generator preference (that I've found at least) to accomplish this. Has anyone been able to generate database objects prefixed with the schema name?
Thanks,
Wayne

Schema owner for ECC 5.0 IDES

Hi,
When I am trying to start ECC 5.0, the work processes are dying below is the error.
OS: Windows, DB: Oracle.
Now I'm connected to ORACLE
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c    10114]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0493EFF4,usrhp=07FC1E64)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPR3/<pwd>@CC5 on connection 0 ...
C Starting user session (con_hdl=0,svchp=0493EFF4,srvhp=07FB9234,usrhp=07FC1E64)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      3721]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    9750]
B ***LOG BY2=> sql error 1017   performing CON [dbsh#1 @ 1200] [dbsh    1200 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#1 @ 1200] [dbsh    1200 ]
B ***LOG BY2=> sql error 1017   performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1270]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9377]
Based on these errors I have looked at Notes: 400241, 50088.
The problem is, even though schema owner is listed as SAPSID, why is SAPR3 being used to connect to Oracle.
I have tried creating the users using note 50088, but to no avail.
I have tried creating the users with schema owner as SAPSID. Above is the error message that I get.
When trying to create the users with owner as SAPR3, I get the below error,
ERROR at line 1:
ORA-00959: tablespace 'PSAPUSER1D' does not exist
ORA-06512: at line 114
Regards,
Vishi

Hi,
I have tried suggestions from you all of you, Thank you.
However the problem still persists. I am quite unable to figure out, why it is showing SAPR3 in wp trace.
Below are the error details from dev_w0 log, trans.log
dev_w0:
Logon as OPS$-user to get SAPR3's password
C Connecting as /@CC5 on connection 0 ...
C Attaching to DB Server CC5 (con_hdl=0,svchp=0493EFF4,svrhp=07FB9234)
C Starting user session (con_hdl=0,svchp=0493EFF4,srvhp=07FB9234,usrhp=07FC1E64)
C Now I'm connected to ORACLE
C *** ERROR => ORA-1403 when accessing table SAPUSER
[dbsloci.c    10114]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0493EFF4,usrhp=07FC1E64)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPR3/<pwd>@CC5 on connection 0 ...
C Starting user session (con_hdl=0,svchp=0493EFF4,srvhp=07FB9234,usrhp=07FC1E64)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      3721]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    9750]
B ***LOG BY2=> sql error 1017   performing CON [dbsh#1 @ 1200] [dbsh    1200 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#1 @ 1200] [dbsh    1200 ]
B ***LOG BY2=> sql error 1017   performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1270]
M in_ThErrHandle: 1
Trans.log"
4 ETW000 [dev trc     ,00000] Thu Nov 24 23:48:32 2011                           80178 0.132260
4 ETW000 [dev trc     ,00000] Assigning server context 02C0982C to service context 02C08C24
4 ETW000                                                                              57 0.132317
4 ETW000 [dev trc     ,00000] Allocating user session handle                        47 0.132364
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=02C08C24,srvhp=02C0982C,usrhp=02C123F4)
4 ETW000                                                                             165 0.132529
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                            6620 0.139149
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              31 0.139180
4 ETW000 [dev trc     ,00000] Try to connect with default password                  73 0.139253
4 ETW000 [dev trc     ,00000] Connecting as SAPCC5/<pwd>@CC5 on connection 0 ...
4 ETW000                                                                              27 0.139280
4 ETW000 [dev trc     ,00000] Assigning username to user session 02C123F4           19 0.139299
4 ETW000 [dev trc     ,00000] Assigning password to user session 02C123F4           28 0.139327
4 ETW000 [dev trc     ,00000] Starting user session (con_hdl=0,svchp=02C08C24,srvhp=02C0982C,usrhp=02C123F4)
4 ETW000                                                                              31 0.139358
4 ETW000 [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000                                                                            7326 0.146684
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000                                                                              31 0.146715
4 ETW000 [dblink      ,00419] ***LOG BY2=>sql error 1017   performing CON [dblink#1 @ 419]
4 ETW000                                                                             141 0.146856
4 ETW000 [dblink      ,00419] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#1 @ 419]
4 ETW000                                                                              27 0.146883
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'CC5'"
Should I go back looking at Note: 400241.
Regards,
Vishnu

Servlet error in portal of oracle application server

I'm have ploblem in portal. Two user login in portal at the same time. Use Administrator Level login Portal.After that user 1 to change password during user 2 (I AM)
working portal. when I'm logout and go to login again I'm can't login the portal error
------------------massage error------------
Servelt Error
An unexpected servlet error was encountered
Please check the log file for more details.
please help me
thank you very much
tanomsup
Message was edited by: tanom
user474356

HI,
How did the user 1 change the password?. This error is generally encountered when a user changes the passward through SQLPLUS prior to changing it through application server. Follow the following solution it should fix it.
Thanks
Rakesh Patel
IT Manager Bearing Point.
1. Log into Oracle Directory Manager and find the Portal db schema password. You can use the following note to assist you with this:
Note.198800.1 How to get the Portal schema password of the Infrastructure database.
2. Once you have the password, log into sqlplus as the sys user and change the Por
tal password to the value in Oracle Directory Manager.
3. Delete all the files under the folders
/<MIDTIER>/Apache/modplsql/cache/plsql
/<MIDTIER>/Apache/modplsql/cache/session
4. Restart the midtier. Test Portal again by attempting to navigate to it. If still getting the error, then try to change t
he Portal schema password again through application server control to the value
from Oracle Directory Manager. To change the value in application server contro
l, try these steps:
6.4.1 Changing Schema Passwords Using the Application Server Control Console
Some schemas store their passwords in Oracle Internet Directory. You must change their passwords using the Application Server Control Console
so the password is updated in both the database and Oracle Internet Directory.
To change a schema password using the Application Server Control Console:
1. Depending on the schema, navigate to the home page for the middle-tier in
stance or the Infrastructure. Refer to Table 6-2 to determine which home page to
use.
2. On the home page, click Infrastructure.
3. On the Infrastructure page, click Change Schema Password.
4. On the Change Schema Password page, select the schema. Enter the new password in the Password and Confi
rm Password fields. Click OK.
5. Test Portal again and update the tar.
*************************

OPS$, Schema Owner and dbs_ora_schema env variable.

HI All.
Have a situation where we've copied a system from one location to another using an online backup. The database is up and running (open) and lookin good.
However, when I goto start SAP, I get a ORA-1403 and ORA-1017 error on startup. As best as I can tell, the OPS$ mechanism created for the base system (before the online restore) is using SAPSID as the owner. However, the schema owner from the database we used for the recovery is SAPR3.
Now when the system goes to logon, OPS$ is looking to fetch SAPSID as the schema owner, but the effective schema owner is SAPR3. Rerunning the oradbusr. sql script as per note 361641 does not change anything.
<b>Issue is related to the environment variable "dbs_ora_schema" - it is currently set to SAPSID, but I need to change it to SAPR3. Can someone offer the proper syntax to change this value in AIX 5.3?</b>
Thanks,
Tim
Thanks!!
Message was edited by:
Tim Hild

Hello Tim,
What i apprehend is that the SAP<SCHEMA-ID> or the password for the same has changed. When u have copied the db of another SID the SAP<SCHEMA-ID> will be according to the earlier SID so it may required to be renamed as per the new SID and so also the naming services might have changed for which the listner may not work properly. Try to rename the SAP<SCHEMA-ID> and reset the password via brtools. The SQL wont work in case of changing the password of SAP<SCHEMA-ID> . First do it from SQL then reset the password again using Brtools.
Comparing tns.ora and listnr.ora files of both the systems will give u a fair idea on the prob.
In the sap server run BRTOLS from cmd prompt then proceed as follows
Brtools----->Choose Additional Functions--->Choose Change Password of DB user
Enter choice 2(Database User/Password)
In user prompt give sapc11 and in password prompt put the password u had changed earlier ie abc123.
Then enter c (for continue) u will be prompted for the new password
When u put the new password it wont be displayed in the prompt just type
Complete the entire guided process.
Hope this resolves your prob.
Regards.

Upgrade failed at SQLSCREXE_ALI_ORG Shadow schema owner cannot logon

I am upgrade BW3.5 to BI 7.00.
I have finished PREPARE and running Uograde now. It failed at Shadow System Installation at phase SQLSCREXE_ALI_ORG. The phase is running a SQL script creating synonyms using tp.
It produce a log TPSQLSTD.OUT as follows:
(The phase SQLSCREXE_GRA_ORG is just above the failed phase using the same logic to executing script)
BLOCKED SIGNALS: ''
SAPup> Starting subprocess 7896 at 20080730211406
ENV <0xffbffbf2>: PATH=/oracle/BWS/102_64/bin:/usr/java/bin:/export/home/bwsadm:/usr/sap/BWS/SYS/exe/run:/usr/bin:.:/usr/ccs/bin:/usr/ucb
ENV <0x9039a4>: DIR_LIBRARY=/oracle/BWS/sapdata/put/exe
ENV <0x903da4>: LD_LIBRARY_PATH=/oracle/BWS/sapdata/put/exe:/usr/j2se/jre/lib/sparc/client:/usr/j2se/jre/lib/sparc:/usr/j2se/jre/../lib/sparc:
/usr/sap/BWS/SYS/exe/run
ENV <0xffbffde5>: dbms_type=ORA
ENV <0xffbffdf3>: dbs_ora_tnsname=BWS
ENV <0x8fd6bc>: dbs_ora_schema=SAPBWD
ENV <0xffbffe1d>: ORACLE_PSRV=BWS
ENV <0xffbffe2d>: ORACLE_SID=BWS
ENV <0xffbffe47>: ORACLE_HOME=/oracle/BWS/102_64
ENV <0xffbffe66>: ORACLE_BASE=/oracle
ENV <0xffbffe7a>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data
ENV <0xffbffeb1>: ORA_NLS10=/oracle/BWS/102_64/nls/data
ENV <0xffbffed7>: NLS_LANG=AMERICAN_AMERICA.WE8DEC
ENV <0x8fd2bc>: auth_shadow_upgrade=1
EXECUTING /oracle/BWS/sapdata/put/exe/tp (tp) pf=/oracle/BWS/sapdata/put/bin/EXDBNEW.TPP execdbscript BWS -x ALORDC.XQL
This is /oracle/BWS/sapdata/put/exe/tp version 372.04.08 (release 700)
ERROR: Connect to BWS failed (20080730211407, probably wrong environment).
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
TRACE-INFO: 1: [dev trc     ,00000] Wed Jul 30 21:14:06 2008                                    85192 0.085192
TRACE-INFO: 2: [dev trc     ,00000] load shared library (/oracle/BWS/sapdata/put/exe/dboraslib.so), hdl 0
TRACE-INFO: 3:                                                                                36 0.085228
TRACE-INFO: 4: [dev trc     ,00000] Oracle Client Version: '10.2.0.2.0'                          3011 0.088239
TRACE-INFO: 5: [dev trc     ,00000] -->oci_initialize (con_hdl=0)                                  49 0.088288
TRACE-INFO: 6: [dev trc     ,00000] Client NLS settings: AMERICAN_AMERICA.WE8DEC                15639 0.103927
TRACE-INFO: 7: [dev trc     ,00000] Logon as OPS$-user to get SAPBWDSHD's password                 83 0.258141
TRACE-INFO: 8: [dev trc     ,00000] Connecting as /@BWS on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
TRACE-INFO: 9:                                                                                44 0.258185
TRACE-INFO: 10: [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
TRACE-INFO: 11:                                                                                50 0.258235
TRACE-INFO: 12: [dev trc     ,00000]    0 WE8DEC                                                    1 101497e98 10149f918 1014a32b0
TRACE-INFO: 13:                                                                                28 0.258263
TRACE-INFO: 14: [dev trc     ,00000] Allocating service context handle for con_hdl=0               183 0.258446
TRACE-INFO: 15: [dev trc     ,00000] Allocating server context handle                               35 0.258481
TRACE-INFO: 16: [dev trc     ,00000] Attaching to DB Server BWS (con_hdl=0,svchp=1014a31e0,srvhp=1014a5580)
TRACE-INFO: 17:                                                                                265 0.258746
TRACE-INFO: 18: [dev trc     ,00000] Assigning server context 1014a5580 to service context 1014a31e0
TRACE-INFO: 19:                                                                                154629 0.413375
TRACE-INFO: 20: [dev trc     ,00000] Allocating user session handle                                153 0.413528
TRACE-INFO: 21: [dev trc     ,00000] Starting user session (con_hdl=0,svchp=1014a31e0,srvhp=1014a5580,usrhp=1014a0130)
TRACE-INFO: 22:                                                                                53 0.413581
TRACE-INFO: 23: [dev trc     ,00000] Assigning user session 1014a0130 to service context 1014a31e0
TRACE-INFO: 24:                                                                                38363 0.451944
TRACE-INFO: 25: [dev trc     ,00000]         BEGIN DBMS_APPLICATION_INFO.SET_MODULE (:A0, :A1); END;
TRACE-INFO: 26:                                                                                208 0.452152
TRACE-INFO: 27: [dev trc     ,00000]         BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO (:A0); END;
TRACE-INFO: 28:                                                                                427 0.452579
TRACE-INFO: 29: [dev trc     ,00000] Now '/@BWS' is connected (con_hdl 0, nls_hdl 0).             3592 0.456171
TRACE-INFO: 30: [dev trc     ,00000]         ALTER SESSION SET NLS_SORT = BINARY
TRACE-INFO: 31:                                                                                51 0.456222
TRACE-INFO: 32: [dev trc     ,00000]         SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
TRACE-INFO: 33:                                                                                1010 0.457232
TRACE-INFO: 34: [dbsloci.    ,00000] *** ERROR => ORA-1403 when accessing table SAPUSER           1832 0.459064
TRACE-INFO: 35: [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 1403                  69 0.459133
TRACE-INFO: 36: [dev trc     ,00000] Disconnecting from connection 0 ...                           116 0.459249
TRACE-INFO: 37: [dev trc     ,00000] Rolling back transaction ...                                   98 0.459347
TRACE-INFO: 38: [dev trc     ,00000] Closing user session (con_hdl=0,svchp=1014a31e0,usrhp=1014a0130)
TRACE-INFO: 39:                                                                                482 0.459829
TRACE-INFO: 40: [dev trc     ,00000] Now I'm disconnected from ORACLE                             3043 0.462872
TRACE-INFO: 41: [dev trc     ,00000] Try to connect with default password                           21 0.462893
TRACE-INFO: 42: [dev trc     ,00000] Connecting as SAPBWDSHD/<pwd>@BWS on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
TRACE-INFO: 43:                                                                                26 0.462919
TRACE-INFO: 44: [dev trc     ,00000] Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
TRACE-INFO: 45:                                                                                26 0.462945
TRACE-INFO: 46: [dev trc     ,00000]    0 WE8DEC                                                    1 101497e98 10149f918 1014a32b0
TRACE-INFO: 47:                                                                                26 0.462971
TRACE-INFO: 48: [dev trc     ,00000] Assigning username to user session 1014a0130                   19 0.462990
TRACE-INFO: 49: [dev trc     ,00000] Assigning password to user session 1014a0130                   28 0.463018
TRACE-INFO: 50: [dev trc     ,00000] Starting user session (con_hdl=0,svchp=1014a31e0,srvhp=1014a5580,usrhp=1014a0130)
TRACE-INFO: 51:                                                                                27 0.463045
TRACE-INFO: 52: [dboci.c     ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1017
TRACE-INFO: 53:                                                                                55819 0.518864
TRACE-INFO: 54: [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'              28 0.518892
TRACE-INFO: 55: [dev trc     ,00000]     set_ocica() -> OCI or SQL return code 1017                  19 0.518911
TRACE-INFO: 56: [dblink      ,00431] ***LOG BY2=>sql error 1017   performing CON [dblink#5 @ 431]
TRACE-INFO: 57:                                                                                246 0.519157
TRACE-INFO: 58: [dblink      ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#5 @ 431]
TRACE-INFO: 59:                                                                                26 0.519183
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
tp finished with return code: 232
meaning:
connect failed
Process with ID 3514 terminated with status 232
Thanks so much
Feng Qi

Check that the schema of your database (ex: select owner from dba_tables where table_name='T000';) really
match the dbs_ora_schema environment variable (you might change dbs_ora_schema=SAPBWD to the real schema of your DB).
then check
su - <sid>adm
R3trans -d
it should return code 0

Prefixing the schema owner to the table name

I have entity objects in my JClient app that were created from tables owned by USER1. When I connect to my JClient app as USER2 the DML fails because the table names are not prefixed by the table owner (USER1). I don't want to use public synonyms and I don't want to customize my view objects just to prefix the table names with the table owner. How could I prefix all of the table names with the table/schema owner by default?

We have been using another approach. We change the "current schema" at the db session level. This avoids having to define public synonyms and having to fully qualify names. It also allows us to have the same application schema defined multiple times in a db instance, which is useful for testing.
While our real code is bit more complicated, basically we implement the afterConnect() and prepareSession() methods on an appication module with a call to our utility method:
protected void afterConnect() {
super.afterConnect();
setupSession('hr');
protected void setupSession(String currentSchema) {
try {
log.debug("Setting current schema to: " + currentSchema +
" via: call alter session set current schema " + currentSchema);
Statement stmt =
getDBTransaction().createStatement(DBTransaction.DEFAULT);
stmt.execute("alter session set current_schema=" + currentSchema);
stmt.close();
} catch (SQLException e) {
if (e.getErrorCode() == 1435) {
log.info("Couldn't set the current_schema to " + currentSchema +
" because it doesn't exist in the target db.");
} else {
log.error("Error setting current_schema in DB context!", e);
} catch (Exception e) {
log.error("Error setting current_schema in DB context!", e);
}

File Error: Unknown File when trying to render a Motion Lower third

I'm getting this: "File Error: Unknown File" when trying to render a Lower third made in the Motion tab. I'm using FCP 6.0.6 and haven't had any issues with this before. It seems to work fine if there is just text, but as soon as I apply any effect, like a drop shadow, I get that error message.
Thanks,
Joe

What's the exact format of the video you're working with and the exact specification the sequence you're editing in?

Error Extending 2012 R2 AD Schema for Exchange 2013 RTM/CU6/CU7 (for Office 365 attributes)

Hello all,
I am a sysadmin at a 3 campus school, and am trying to extend our AD schema to include Exchange 2013 attributes so that we can configure groups synced to Office 365 using DirSync. However it keeps failing at the same point each time.
I have tried with RTM first, and then CU6, but I keep getting the same error and am unsure how to fix it.
"repadmin /showrepl" says that our 3 DCs are replicating with no issues, and I'm trying to extend the schema using an "Enterprise Admin"/"Schema Admin" account on our schema master DC.
Our domain/forest functional level is Server 2008R2, and we do not have an Exchange server set up already - if that helps.
The PowerShell error is:
PS C:\Users\rbbr\Desktop\Exchange> .\setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 6 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema FAILED
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to impor
t the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be
found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object ta
rget, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String
schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePip
elineIfFailed)".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
And ldif.err says:
Entry DN: CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan
Add error on entry starting on line 452: Unwilling To Perform
The server side error is: 0x20bb Schema update failed: duplicate OID.
The extended server error is:
000020BB: SvcErr: DSID-032603C0, problem 5003 (WILL_NOT_PERFORM), data 8379
An error has occurred in the program
The schema attribute "CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan" does exist in the schema, but I don't know what to do or where to go from here.
Any assistance would be greatly appreciated.

I just tried .\setup /PrepareAD /OrganizationName:kurnaicollege /IAcceptExchangeServerLicenseTerms, and got the exact same error as above.
Is there a way to delete the offending schema attributes, or to force its overwrite or something?
EDIT: I am also getting these eventvwr errors when running /PrepareAD, if it helps:
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Proxy Instance Count
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
3540 NBBPassThruAuth_Helper
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1704 conhost
1540 svchost
4492 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
520 svchost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
4440 NBBPassThruAuth_Helper
3648 conhost
884 svchost
1080 vmtoolsd
3440 conhost
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
4760 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Base for Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetup.exe
4768
Get Servers for kurnai.lan
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.1106192. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Time in Resource per second
MSExchange Activity Context Resources
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
4168 dwm
776 MsMpEng
2940 dllhost
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
712 WmiPrvSE
2088 dfssvc
1692 MSOIDSVCM
960 svchost
304 csrss
4436 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
4388 mmc
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
1644 MSOIDSVC
3416 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Activity Context Resources : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange activity context resources. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0938055
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0312685
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:02.1887925
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeOrganization
-Industry "NotSpecified" -PrepareDomain "True" -DomainController "C-Server1.kurnai.lan" -ActiveDirectorySplitPermissions $null -PrepareOrganization "True" -PrepareSchema "True" -OrganizationName "kurnaicollege"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
31
00:03:01.8261106
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)". ---> Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
Ex88D115
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table

SQL error 3113 occurred when executing EXEC SQL.

Hi,
We are facing one typical problem, One background is failing regularly with
below dump. as we now got all notes giving information, if database restarted
taking backup, these type of failures occur, but our database is only down for backup once in a week, but it is failing with frequenly.
in this two servers are located in different place, in this job tries to connect
another server to get material statistics.
It is giving some error message in sm21 with
SQL error 3113 occurred when executing EXEC SQL.
work procees in reconnect mode.
all notes saying these types of dump occur when database restared, but this dump
even though database is up.
below is short dump, please can anyone help me from this problem.
ABAP runtime errors    DBIF_DSQL2_SQL_ERROR
      Occurred on    08.01.2007 at 00:30:28
>> Short dump has not been completely stored. It is too big.
SQL error 3113 occurred when executing EXEC SQL.
What happened?
The error occurred in the current database connection "AZ1".
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
How to correct the error
Database error text........: "ORA-03113: end-of-file on communication channel#"
Triggering SQL statement...: "select mara.groes, mara.brgew, mara.ntgew,
mara.gewei, mara.volum, mara.voleh, mara.mstae, mara.mstde, mara.prdha,
marc.matnr, marc.werks, marc.mmsta, marc.mmstd from sapr3.mara, sapr3.m
where sapr3.mara.mandt = sapr3.marc.mandt and sapr3.mara.matnr =
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"DBIF_DSQL2_SQL_ERROR"
"ZM2431216 " or "ZM2431216 "
"EXTRACT_GENERAL_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in th
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error o
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "essceu3"
Network address.......... "172.19.119.198"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C7ADBD4C00"
Database server.......... "ukblx176"
Database type............ "ORACLE"
Database name............ "EU3"
Database owner........... "SAPR3"
Character set............ "es_ES.ISO8859-1"
SAP kernel............... "46D"
Created on............... "Jul 9 2006 20:26:33"
Created in............... "AIX 1 5 00447C4A4C00"
Database version......... "OCI_920__OCI_7_API "
Patch level.............. "2257"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.0.5.., ORACLE 8.0.6.., ORACLE
8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.2.0.."
SAP database version..... "46D"
Operating system......... "AIX 1 4, AIX 2 4, AIX 3 4, AIX 1 5, AIX 2 5, AIX 3
5, , System build information:,                                      , LCHN :
841480"
User, transaction...
Client.............. 600
User................ "MPZMMES"
Language key........ "S"
Transaction......... " "
Program............. "ZM2431216 "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZM2431216 " in
"EXTRACT_GENERAL_DATA".
The main program was "ZM2431216 ".
The termination occurred in line 980
of the source code of program "ZM2431216 " (when callin
The program "ZM2431216 " was started as a background jo
Source code extract
009500              mara.ntgew,
009510              mara.gewei,
009520              mara.volum,
009530              mara.voleh,
009540              mara.mstae,
009550              mara.mstde,
009560              mara.prdha,
009570              marc.matnr,
009580              marc.werks,
009590              marc.mmsta,
009600              marc.mmstd
009610        into :w_ops-groes,
009620              :w_ops-brgew,
009630              :w_ops-ntgew,
009640              :w_ops-gewei,
009650              :w_ops-volum,
009660              :w_ops-voleh,
009670              :w_ops-mstae,
009680              :w_ops-mstde,
009690              :w_ops-prdha,
009700              :w_ops-matnr,
009710              :w_ops-werks,
009720              :w_ops-mmsta,
009730              :w_ops-mmstd
009740        from sapr3.mara, sapr3.marc
009750        where sapr3.mara.mandt = sapr3.marc.mandt
009760          and sapr3.mara.matnr = sapr3.marc.matnr
009770          and sapr3.mara.mandt = :p_mandt
009780          and sapr3.mara.matnr = :w_ebs-matnr
009790          and sapr3.marc.werks = :p_owerks
    >    ENDEXEC.
009810 endform.                    " extract_general_data
009820 *&
009830 *&      Form append_i_ops
009840 *&
009850 *      Appends W_OPS to I_OPS
009860 *
009870 form append_i_ops.
009880    append w_ops to i_ops.
009890 endform.                    " append_i_ops
009900 *&
009910 *&      Form extract_material_description
009920 *&
009930 *      Extracts a Material Description from the remote database an
009940 *      modifies the current record in I_OPS.
009950 *
009960 *        >P_SPRAS Language Key
009970 *
009980 form extract_material_description using    p_spras.
009990    EXEC sql performing set_langauge.
Contents of system fields
SY field contents..................... SY field contents............
SY-SUBRC 0                            SY-INDEX 0
SY-TABIX 1                            SY-DBCNT 1
SY-FDPOS 18                            SY-LSIND 0
SY-PAGNO 0                            SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+..
W_EBS-PRAT4
                              2
                              0
W_OPS-GROES
                              22222222222222222222222222222222
                              00000000000000000000000000000000
W_OPS-BRGEW                    #######
                              0000000
                              000000C
W_OPS-NTGEW                    #######
                              0000000
                              000000C
regards,
krishnaiah.

Hi,
This is usually a SERVER SIDE DATABASE PROBLEM or SQLNET LISTENER (server side) PROBLEM. The client side should initially be ignored and instead the server should be investigated. In rare cases, this can be caused by client
side memory or other resource problem, or a DLL version mismatch, but this is
unlikely.
Enlist the assistance of your DBA. Then reproduce the ORA-3113 error on your
client application. Ask your DBA to look at the database side Alert.log and
trace files and look for ANY activity. Any activity that coincides with your
ORA-3113 will be a clue.
REgards
Vinod

ERRORS IN PORTAL WHEN DROPPING SCHEMA OWNER

Similar Messages

Maybe you are looking for