ERWB end to end monitor configuration error

Error msg:
Configuration saved RFC ping failed for the following RFC destinations (created upon saving) in the system PI0001: PMIMZ020020090413
Incorrect RFC Destinations: When the configuration is saved, an RFC destination is created on the monitoring server for each XI component to enable end-to-end monitoring of the respective XI component. However, the test call failed for the destinations listed. Therefore, you must check the call and the authorization on the monitoring server for the destinations concerned, by using transaction SM59. Also check whether RFC user used for the destination is maintained in the relevant XI component. Note that a component can only be monitored when its RFC destination is maintained correctly.
Incorrect RFC Destinations
Component Type Name of Component RFC Destination Message for RFC Call
ALE-LogicalSystem MZ0CLNT200 PMIMZ020020090413 Error when opening an RFC connection
When I check the RFC destination, I found XI createPMI destination with Load balancing Status "YES" every time, and failed the connect test.

Hi,
Please check the RFC's PMIMZ020020090413 in SM59.
There you will find the test conncetion tab. Please check if you are able to login to target system or not.
If not please set the logon parameters and host name.
Also if the name and password are correct, check the following points
1. The user is not locked on system that is the target of the RFC.
2. Assigned the Authorisation object S_RFCACL for the user. It is to allow the user to access the trusted/trusting system.
3. If you are on PI7.1 please check if the sm59 destination has fully qualified hostname.
I hope it should solve your problem.
Best Regards
Jitender Chauhan.

Similar Messages

Error in Configuration and End to end monitoring

Hi all,
I am getting error in RWB under configuration and end to end monitoring.
End to end monitoring iam getting
"Neither the messager server nor the application server can be reached for system pirdev.titan.co.in"
and under
Configuration
"Cannot read the configuration for the selected domain because the system was unable to connect to the monitoring server (possibly due to incorrect logon data). Error message: Neither the messager server nor the application server can be reached for system pirdev.titan.co.in"
Please help me.
Regards
Pradeep P N

Hi,
Have you gone throgh these threads.
Neither the messager server nor the application server can be reached
Error when I click "End-to-End monitoring" in XI runtime workbench
Neither the messager server nor the application server can be reached
Regards
Goli Sridhar

RFC Connection Error (for end-to-end Monitoring)

Hi,
I am configure End-to-End monitoring in XI 3.0 SP20, PMI does't show data in end-to-end monitoring... anyway!!! I check RFC connection PMI
RFC destination name: PMIXQA90020080827
in TEST connection I am getting an error: "Group PUBLIC not Found" where may I define that PUBLIC to solve this problem please let me know.... thanks
and what is Group PUBLIC in RFC ??? what does it do???
Is there any notes I can read for related issue, please help me out this
Thanks a lot in advanced
Edited by: issue2008 issue on Aug 28, 2008 10:03 AM

Thanks for reply... SURE I can tell you
Connection Type: 3 R/3 connection
ScreenShot shows blow:
http://www.flickr.com/photos/25222280@N03/2806290586/sizes/o/
Thanks
Edited by: issue2008 issue on Aug 28, 2008 10:20 AM

Error in End-to-End Monitoring

Dear All,
when i click display on End-to-End Monitoring, and then not accepting any user etc and the following error message come up
Logon failed error
Call of URL http://sapxi:50010/sap/bc/bsp/sap/spi_monitor/monitor.do terminated due to error in logon data.
Note
Logon performed in system XID .
Logon performed for client 100 and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
error code: ICF-LE-http-c:100-l:3-T:21-C:3-U:5-P:-L:7
HTTP 401 - Unauthorized
Please help.
Regards,
Venkat.

Dear All,
As per your suggestion,I have used PIRWBUSER,
In Runtime Workbench -> configuration (with user PIRWBUSER) i see "A monitoring configuration for the selected XI domain does not yet exist" and a table with 2 component are checked.
When i try "Save Configuration", it writes " RFCDEST_NOT_CREATED".
and I try to use Runtime Workbench -> end-to-end monitoring.But i get "No process defined for this domain ", when "Display".
Please suggest me,how to procced.
Sridhar:user is aleady having the SAP_XI_MONITORING role.
Regards,
Venkat.

End-to-end monitoring error!!!!!!

hi.
i have a problem.
i trying to start a new selection in end-to-end monitoring, but i have an error with JNET: java.lang.NullPointerException. can anybody help me to resolve it please??
another question is: What is JNET?
is the fist time i configure CCMS and have thousands problems
be patiends with me!
thanks very much!!!

java.lang.NullPointerException in End-to-End monitoring
java.lang.NullPointerException in End-to-End monitoring
Ref. the above threads.

** End-to-End Monitoring - RFC destination error while save config in RWB

Hi Friends,
We have 2 RFC destinations in our XI server. 1) PMI<client>001 2) PMI<client><client>800. First one is for XI server. Next one is for Sender/Receiver System.
We want to activate End-to-End Monitoring in RWB. For this, when I save configuration, it throws the following error.
Incorrect RFC Destinations: When the configuration is saved, an RFC destination is created on the monitoring server for each XI component to enable end-to-end monitoring of the respective XI component. However, the test call failed for the destinations listed. Therefore, you must check the call and the authorization on the monitoring server for the destinations concerned, by using transaction SM59. Also check whether RFC user used for the destination is maintained in the relevant XI component. Note that a component can only be monitored when its RFC destination is maintained correctly.
I have checked the user in the above destinations. For the first destination, we have assigned PIRWBUSER of XI system. Test Connection is OK, but unable to login remote. At the same time, PIRWBUSER is not locked.
For the second destination, I have assigned some login user of sender/receiver system. Test connection is OK. Able to login remotely.
There is no RFC user in our XI system. (I tried using RFCUSER* thru SU01 tcode).
There is no PIRWBUSER in the Sender/Receiver System.
In RWB, Configuration, 3 components are there. 1) XIIntegrationServer 2) Business System (for Sender/Receiver System) 3) XI Adapter Framework. I selected last two. (First one is already selected). Monitoring Level : Medium (for all 3). Send and Receive Check box is selcted for the last two.
So, what could be the problem for the above error?
Could you kindly clarifiy friends.
Thanking you
Kind Regards,
Jeg P.

Hi friends,
I have one RFC Destination PMI<sysid>001. (Abap Connction) in my XI system. This destination is for XI server. Connection Test is OK. Remote Logon by using the PIRWBUSER is also ok.
In the 'Configuration' tab of the Runtime Workbench, when we select 'Save Configuration', (Business System and Adapter Framework is not activated) with the default activation for XI Integration Server, the system throws the following error.
Incorrect RFC Destinations: When the configuration is saved, an RFC destination is created on the monitoring server for each XI component to enable end-to-end monitoring of the respective XI component. However, the test call failed for the destinations listed. Therefore, you must check the call and the authorization on the monitoring server for the destinations concerned, by using transaction SM59. Also check whether RFC user used for the destination is maintained in the relevant XI component. Note that a component can only be monitored when its RFC destination is maintained correctly.
When we save configuration, an one more destination is automatically created in the name as below.
PMI<sysid>001<yyyymmdd>. For Example, PMIPID00120080207.
When we test newly created RFC destination, connection is OK, but not able to remot login using the same user PIRWBUSER.
The difference between old and new RFC destination, in old, we have selected Load Balancing is 'Yes', but in the new it is 'No'. The system also tells the error below.
Name or Password is incorrect (repeat logon) - PMIPID00120080207
But, still remote login is possible in the old RFC destination using the PIRWBUSER.
So, What could be the problem ...?
Kindly reply, friends.

Confusion configuring End-to-End Monitoring

Hi,
I'm having some confusion configuring end-to-end-monitoring for the Adapter Framework on the Integration Server. If I activate the monitoring and save, I get the message that the HTTP Destination pmistore cannot be found and the prompt to make a new one. The destination pmistore is there, however, and correct, as far as I can tell.
If I make a new one using XIRWBUSER, I get the HTTP error 403, if I do it with a user with SAP_ALL, it works. Is this user just used to create the destination, but the communication still goes with XIRWBUSER, as it should be?
What am I doing wrong?
Greetings,
Francis Wolf

Hi,
configuring end-to-end monitoring - we have to put monitoring level high for which components
--> End to End monitoring is possible with Runtime Workbench with End-to-End Monitoring option.
Refer
Configuring End-to-End Monitoring
http://help.sap.com/saphelp_nw04s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
2) activating end-to-end-monitoring -what's the frequency we have to mention ? what is the appropriate frequency?
---> You can have the end-to end monitoring based on the processing of the interfaces and the performance of the interface.
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/frameset.htm
3) in activating ccms monitoring for xi -ccms config in sxmb_adm parameter-ccms_monitoring to 1 ?why
-->
XI : Configuring CCMS Monitoring for XI
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i -
CCMS Monitoring Infrastructure FAQ
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dae7037a-0901-0010-f998-fd29d955714b
CCMS Monitoring Detailed Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2bc02d89-0901-0010-be9c-9c038d739e60
Thanks
Swarup

Getting Error while accessing End to end Monitoring.

Hi,
We are running XI 3.0 on MS SQL Server. While we hit END to END Monitoring Button we getting some error.
Here the Error.
Service cannot be reached
What has happened?
URL http://lax05sesd02:50000/sap/bc/bsp/sap/spi_monitor/monitor.do call was terminated because the corresponding service is not available.
Note
The termination occurred in system XID with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:LAX05SESD02_XID_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Please help us to solve this issue.

Hi,
We are running XI 3.0 on MS SQL Server. While we hit END to END Monitoring Button we getting some error.
Here the Error.
Service cannot be reached
What has happened?
URL http://lax05sesd02:50000/sap/bc/bsp/sap/spi_monitor/monitor.do call was terminated because the corresponding service is not available.
Note
The termination occurred in system XID with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:LAX05SESD02_XID_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Please help us to solve this issue.

Configuring end-to-end monitoring

1) configuring end-to-end monitoring - we have to put monitoring level high for which components
2) activating end-to-end-monitoring -what's the frequency we have to mention ? what is the appropriate frequency?
3) in activating ccms monitoring for xi -ccms config
in sxmb_adm parameter - ccms_monitoring to 1 ? why
give me all the details of that , i hope i will get appropriate from u guru's

Hi,
configuring end-to-end monitoring - we have to put monitoring level high for which components
--> End to End monitoring is possible with Runtime Workbench with End-to-End Monitoring option.
Refer
Configuring End-to-End Monitoring
http://help.sap.com/saphelp_nw04s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
2) activating end-to-end-monitoring -what's the frequency we have to mention ? what is the appropriate frequency?
---> You can have the end-to end monitoring based on the processing of the interfaces and the performance of the interface.
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/frameset.htm
3) in activating ccms monitoring for xi -ccms config in sxmb_adm parameter-ccms_monitoring to 1 ?why
-->
XI : Configuring CCMS Monitoring for XI
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i -
CCMS Monitoring Infrastructure FAQ
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dae7037a-0901-0010-f998-fd29d955714b
CCMS Monitoring Detailed Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2bc02d89-0901-0010-be9c-9c038d739e60
Thanks
Swarup

Issue in configuring the End to End Monitering.

Hi,
I was trying to configure the end to end monitering in RW, and it is askin for uid and password, on applying them , it is not opening , and giving a messege as
Unable to read the current configuration for the selected XI domain because the system was unable to estable a connection to the monitoring server (possibly due to incorrect logon data). Error message: Unable to log on to system isrxidev in language en with user PISUPER.
What should i do? I am a super user.I hav all authorisations!Is this my role, or a basis / administrator role, tell me the solution, i need to check full end to end status of a messge from source point to target point.
Also, how do I set up the PIPELINE configuration. Any settings required in SICF transaction to see the different stages of a messege in sxmb_moni. Mine is a file to idoc scenerio, and in sxmb_moni i can only see the
Inbound Messege
Receiver Grouping
and
Response.
I was expecting to see the status at Receiver determination and interface Determination!
Arnab Mondal

Login with PIRWBUSER for end to end monitoring..
Follow these steps :
http://help.sap.com/saphelp_nw04s/helpdata/en/06/5d1741b393f26fe10000000a1550b0/frameset.htm
Still problem exists then go thru the below thread
End-to-End Monitoring
Check whether all CIF services were activated in Visual Admin

End to End Monitoring is not working

Hi All,
I don't see the msgs in End to End Monitoring. I have checked all connections in SM59, full host name parameters is present in profile.
I cannot select the "instance" radio button either. Anyone had these problems in SP12, XI3.0 SR1.
thanks
tony

Hi All,
I have also same problem of end to end monitoring ,it does not refreshing statistics after certain interval,
currently statitical data is showing like
Errors 0
Open 0
Successfully Completed 0
Overall 0
I have set frequency of hourly in furthur settings.
But messages are not seen , it is showing only starting (when we configured end to end monitoring) days message statistics .
Expecting some clue to resolve this.
Thanks in advance
Regards,
Santosh

End to End Monitoring

Hello,
I have implemented this scenario :
"Flat file ->mapping->BPM (for calling a bapi)->mapping->Flat file" and when i use the message monitoring sometimes end-to-end monitoring is available and sometimes not, Why ??? Is there a specific configuration for enable end-to-end monitoring in any case ?
Regards
Vincent

Hi,
What error do you get ? I consistently get this error :-
Service cannot be reached
What has happened?
URL http://axonlabs11.axonlabs.co.uk:8000/sap/bc/bsp/sap/spi_monitor/monitor.do call was terminated because the corresponding service is not available.
Note
The termination occurred in system XI3 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:axonlabs11_XI3_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Kind regards
Colin.

Error in End to End Monitering: java.lang.NullPointerException

Hi Experts,
while tryimg to configure the end to end monitering in my system, when i open the RW- > end to end monitering , I get teh following error.
java.lang.NullPointerException
I hav already added the PMI Monitering parameter in the SXMB_ADM -> integration engine configuration.
Any feed experts!
Regards,
Arnab .

Hi Arnab,
Go Throgh the following thread.
Re: java.lang.NullPointerException in End-to-End monitoring
Regards
Goli Sridhar

RWB-Message Monitoring and End-to-End Monitoring

hi
Can someone explain the differences between Message Monitoring & End-to-End Monitoring through RWB. I see both of them displaying the messages status with better descriptive with End-to-End Monitoring.

HI Chandra
You use message monitoring in the following cases:
1 To track the status of messages
2 To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
1 If you want to monitor message processing steps in a number of SAP components (to be configured).
2 If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated.
Cheers..
Vasu
<i>** Reward Points if found useful **</i>

No entry in End-to-End monitor

I found no entry in my End-to-End Monitoring. the Overall message is 0, and I found a green icon with "No errors" text in its right. If I click the green icon, a view will occurs below and shows "No instances are available".
I've configured the components I want to monitor in "Configuration" with high level and saved.
Anyone can help me?

hi,
did you check the prerequisites?
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
also check this doc:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
for end to end configuration - step by step
Regards,
michal

ERWB end to end monitor configuration error

Similar Messages

Maybe you are looking for