ES 2 and JDBC: Query with a multi set return

I know that ES does not have a Query that returns multiple result sets, is there one in ES2?
If not, what are people using for this functionality?
Cheers

I'm looking for this functionality as well.
While using scripting is a solution it's not exactly a viable long term solution. I'm sure the scripting option was intended to cover off potential one off situations that required a bit more programmatic control than the default toolbox supplied. We are going to have to create a custom script for every process because of the multi query limitation. We don't even have the option of a JDBC component that returns results from a stored procedure as LC doesn't even have that. If that was available we could at least work around the limited result sets.
Limiting the number of result sets for the multi query to one is extremely short sighted. Not to mention the inabilility for the multi query to return a hierarchal xml payload.
In general the LC database connectivity options are puzzling. Why is there no JDBC connector for stored procedures that returns data? Why is the multi query limited to a flat structure and one result set? Surely there are PDF's that need to be populated with complex data structures?
Perhaps even more frustratiing is that it isn't possible to reuse existing legacy data stores/stored procedures in a new process without creating a new approach to data access to comply with LC's deliberately limited JDBC options. Why have the data integration capabilities of JBOSS (in our case) been handicapped?
Overall, LC has been a great help in providing a shared business workflow option for our enterprise but the data access needs to be improved to enable LC to operate with existing systems and to provide more options for transforming business process on paper into business processes in LC.

Similar Messages

I have the combo pack Photoshop and Premiere 10 with the multi DVD's and I have Windows 7 Ultimate 6

I have the comb pack Photoshop 10 and Premiere 10 with multi DVD's labeled 1 of 5 throu 5 of 5 . I have Windows 7 Ultimate and I'm just confused do I start with 1 of 5 then go to 2 of 5 and the fallow it up with 4 of 5 and 5 of 5 ?????? I think I lost a screw, don't know why it has got me baffeled.

Roy Begue wrote:
do I start with 1 of 5 then go to 2 of 5 and the fallow it up with 4 of 5 and 5 of 5 ?
Yes, sounds right.
You may find that only Disc 1 is the application disk (to install the actual software) and the rest are extra content/templates/goodies.

Error executing a query with large result set

Dear all,
after executing a query which uses key figures with exception aggregation the BIA-server log (TrexIndexServerAlert_....trc) displays the following messages:
2009-09-29 10:59:00.433 e QMediator    QueryMediator.cpp(00324) : 6952; Error executing physical plan: AttributeEngine: not enough memory.;in executor::Executor in cube: bwp_v_tl_c02
2009-09-29 10:59:00.434 e SERVER_TRACE TRexApiSearch.cpp(05162) : IndexID: bwp_v_tl_c02, QueryMediator failed executing query, reason: Error executing physical plan: AttributeEngine: not enough memory.;in executor::Executor in cube: bwp_v_tl_c02
--> Does anyone know what this message exactly means? - I fear that the BIA-Installation is running out of physical memory, but I appreciate any other opinion.
- Package Wise Read (SAP Note 1157582) does not solve the problem as the error message is not: "AggregateCalculator returning out of memory with hash table size..."
- To get an impression of the data amount I had a look at table RSDDSTAT_OLAP of a query with less amount of data:
   Selected rows      : 50.000.000 (Event 9011)
   Transferred rows :   4.800.000 (Event 9010)
It is possible to calculate the number of cells retreived from one index by multiplying the number of records from table RSDDSTAT_OLAP by the number of key figures from the query. In my example it is only one key figure so 4.800.000 are passed to the analytical engine.
--> Is there a possibility to find this figure in some kind of statistic table? This would be helpful for complex queries.
I am looking forward to your replies,
Best regards
Bjoern

Hi Björn,
I recommend you to upgrade to rev 52 or 53. Rev. 49 is really stable but there are some bugs in it and if you use BW SP >= 17 you can use some features.
Please refer to this thread , you shouldn't´t use more than 50% (the other 50% are for reporting) of your memory, therefor I have stolen this quote from Vitaliy:
The idea is that data all together for all of your BIA Indexes does not consume more then 50% of total RAM of active blades (page memory cannot be counted!).
The simpliest test is during a period when no one is using the accelerator, remove all indexes (including temporary) from main memory of the BWA, and then load all indexes for all InfoCubes into ain memory. Then check your RAM utilization.
Regards,
-Vitaliy
Regards,
Jens

JDBC query with Sybase database

Hi Folks,
I am working with Oracle 9i Reports Builder connecting to Sybase database using jdbc-odbc driver type.
I could connect to the database, use a simple query and generate reports.
Problem is only when, I use a variable in WHERE clause and have
1. group functions in SELECT statements (i.e. sum(), count()..)
2. NOT IN operations in one of conditions
Error message was thrown saying "Incorrect Syntax near ':.' "
(I declare a variable in USER PARAMETER and use the same in WHERE clause by refering say "where trandate=:m_trandate".)
Though there is no syntax error AT ALL. Am very sure about it, because when I execute the same statement in "isql" , it works perfectly.
Can anyone, let me know whether Is it a limitation on Report Builder with Sybase db or Is any configuration do I miss??
Also, let me know if there is any work around process to handle this situation.
Sample Query I tried :
select item, avg(rate) from inventory
where item=:mitem /* mitem is a variable */
group by item
Any information is welcome.
Thanks & Regards
Anand
Mail ID: [email protected]

Hi Sachin,
I too, got through the issue. Sorry am bit late in updating you. But still I would say it is not on consistent(my feedback as per I grabbed from the behavior. Say, I accepted the query in a particular order of WHERE clause, then If I change the order it will throw an error message saying "Incorrect syntax".)
Anyway working fine. Thanks for your immediate response with useful hints.
Rgds
Anand
Hi Anand,
Yes, JDBCPDS accepts all Select queries which follows SQL Specification.
It would be a valid query as per the database used.
Please try again, Bind parameters can be placed in any or all of the conditions of SQL Query in JDBCPDS.
I am able to use them in both the cases you told.
With Regards
Reports team

Timestem and jdbc Query Timeout

hi all,
i have install timesten on one computer and configure there Query Timeout like This:
SQLQueryTimeout = 80
and i have JBoss Application Server on another computer and timesten client.
i've timesten-xa-ds.xml configuration file configured like this :
<set-tx-query-timeout>
<query-timeout>50000</query-timeout>
<set-tx-query-timeout>
and when i tryed to execute sql command i get an error:
14:19:13,342 WARN [JDBCExceptionReporter] SQL Error: 0, SQLState: S1000
14:19:13,344 ERROR [JDBCExceptionReporter] [TimesTen][TimesTen 6.0.4 CLIENT]Query Timeout must be numeric, greater than or equal to 0, and less than the Network Timeout
14:19:13,346 ERROR [STDERR] javax.persistence.PersistenceException: org.hibernate.exception.GenericJDBCException: could not execute query
14:19:13,346 ERROR [STDERR] at org.hibernate.ejb.AbstractEntityManagerImpl.throwPersistenceException(AbstractEntityManagerImpl.java:567)
14:19:13,346 ERROR [STDERR] at org.hibernate.ejb.QueryImpl.getResultList(QueryImpl.java:56)
14:19:13,347 ERROR [STDERR] at com.magti.businesslayer.ejb3Fasade.srvprov.MobileServiceFasadeBean.simChange(MobileServiceFasadeBean.java:1381)
can anybody help me ? :(

We are execute some tests and we got this mistake
java.sql.SQLException: [TimesTen][TimesTen 7.0.1.0.0 CLIENT]Query Timeout must be numeric; if the Network Timeout is non-zero, the Query Timeout must be greater than zero and less than the Network Timeout, else if the Network Timeout is zero, the Query Timeout must be greater than or equal to zero.
at com.timesten.jdbc.JdbcOdbc.createSQLException(JdbcOdbc.java:3186)
at com.timesten.jdbc.JdbcOdbc.standardError(JdbcOdbc.java:3320)
at com.timesten.jdbc.JdbcOdbc.standardError(JdbcOdbc.java:3285)
at com.timesten.jdbc.JdbcOdbc.SQLSetStmtOption(JdbcOdbc.java:2555)
at com.timesten.jdbc.JdbcOdbcStatement.setStmtOption(JdbcOdbcStatement.java:1889)
at com.timesten.jdbc.JdbcOdbcStatement.setQueryTimeout (JdbcOdbcStatement.java:714)
at org.hibernate.jdbc.AbstractBatcher.closeQueryStatement(AbstractBatcher.java:226)
at org.hibernate.jdbc.AbstractBatcher.closeQueryStatement(AbstractBatcher.java:162)
at org.hibernate.loader.Loader.doQuery(Loader.java:714)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:224)
at org.hibernate.loader.Loader.loadCollection(Loader.java:1919)
at org.hibernate.loader.collection.CollectionLoader.initialize(CollectionLoader.java:71)
at org.hibernate.persister.collection.AbstractCollectionPersister.initialize(AbstractCollectionPersister.java:520)
at org.hibernate.event.def.DefaultInitializeCollectionEventListener.onInitializeCollection(DefaultInitializeCollectionEventListener.java:60)
at org.hibernate.impl.SessionImpl.initializeCollection(SessionImpl.java:1627)
at org.hibernate.collection.AbstractPersistentCollection.forceInitialization(AbstractPersistentCollection.java:454)
at org.hibernate.engine.StatefulPersistenceContext.initializeNonLazyCollections(StatefulPersistenceContext.java :827)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:229)
at org.hibernate.loader.Loader.doList(Loader.java:2150)
at org.hibernate.loader.Loader.listIgnoreQueryCache (Loader.java:2029)
at org.hibernate.loader.Loader.list(Loader.java:2024)
at org.hibernate.loader.hql.QueryLoader.list(QueryLoader.java:369)
at org.hibernate.hql.ast.QueryTranslatorImpl.list(QueryTranslatorImpl.java :300)
at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:146)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1093)
at org.hibernate.impl.QueryImpl.list(QueryImpl.java:79)
at org.springframework.orm.hibernate3.HibernateTemplate$31.doInHibernate(HibernateTemplate.java:853)
at org.springframework.orm.hibernate3.HibernateTemplate.execute(HibernateTemplate.java:366)
at org.springframework.orm.hibernate3.HibernateTemplate.find (HibernateTemplate.java:844)
at org.springframework.orm.hibernate3.HibernateTemplate.find(HibernateTemplate.java:836)
at com.bursatec.bmv.selectividad.persistence.dao.impl.FedCenlacesDaoImpl.findEnlaces(FedCenlacesDaoImpl.java :119)
at com.bursatec.bmv.retransmision.middleware.service.impl.RetransmisorImpl.getEnlaces(RetransmisorImpl.java:229)
at com.bursatec.bmv.retransmision.middleware.service.impl.RetransmisorImpl.getInfoEnlace (RetransmisorImpl.java:242)
at com.bursatec.bmv.retransmision.middleware.service.impl.RetransmisorImpl.efectuarReTx(RetransmisorImpl.java:122)
at com.bursatec.bmv.retransmision.middleware.service.impl.RetransmisorImpl.atenderSolicitud (RetransmisorImpl.java:103)
at com.bursatec.bmv.retransmision.middleware.configura.SubscriptorListener.onMessage(SubscriptorListener.java:22)
at progress.message.jimpl.Session.deliver(Unknown Source)
at progress.message.jimpl.Session.run(Unknown Source)
at progress.message.jimpl.Session$SessionThread.run(Unknown Source)
I wish some one could help me
Thanks a lot.

Query with/without group by returning totally different results

Hi,
I've got this query:
select count(DISTINCT UL.user_id)
from app_user_log UL,
    company_registry CR,
    productarea PA,
    user_registry UR
     where UL.time_stamp >= to_date('04/02/2002','dd-mm-yy')
     and UL.time_stamp <= to_date('10/02/2002','dd-mm-yy')
     and UL.description = 'Open'
     and UR.INT_COMPANY_ID=CR.COMPANY_ID
     and PA.PRODUCTAREA_ID=CR.PRODUCTAREA_ID
     and UL.USER_ID=UR.USER_IDIt returns the value 262
I then want to divide this into one block pr application_id so that I get the number of users with app_id=1 as first applications, the number of users with app_id=2 as first application, and so on..
I thought this would be it:
select ul.application_id, count(DISTINCT UL.user_id)
from app_user_log UL,
    company_registry CR,
    productarea PA,
    user_registry UR
     where UL.time_stamp >= to_date('04/02/2002','dd-mm-yy')
     and UL.time_stamp <= to_date('10/02/2002','dd-mm-yy')
     and UL.description = 'Open'
     and UR.INT_COMPANY_ID=CR.COMPANY_ID
     and PA.PRODUCTAREA_ID=CR.PRODUCTAREA_ID
     and UL.USER_ID=UR.USER_ID
      group by ul.application_idBut this query yields an output with the sum of the counts way above 262 as I would expect..

Approach the problem as you would any programming problem - break it down into simpler problems. Solve each of these logically.
Simplifying here, but you should get the basics of this. For example. We need the earliest time stamp from a table. Then we need to select a distinct list of users and applications for that time stamp.
with EARLIEST_TIME_STAMP as (
select
MIN( datetime_stamp ) AS datetime
from my_table
select
count( DISTINCT userid ) as DISTINCT_USERS,
count( DISTICT applications ) as DISTINCT_APPLICACTION
from my_table t
join EARLIEST_TIME_STAMP s
on s.datetime = t.datetime_stamp

We upgraded AdobePhotoshop Elements 10 and are unfamiliar with the new set-up and installing.

It has asked me to uninstall the "installation browser," which I did. Then download the update. . . which I tried to do. . . It said I needed to download Adobe Air first. . . which I tried to do. . I repeatedly get an error saying, retry??? I'm stuck? Where do I go from here?

You want to keep your OS X and Application files on the SSD (e.g. /Applications, /Library, /System, /Users). You can put any data files you want elsewhere such as documents, spreadsheets, music, videos, software install files (.dmg).
I wouldn't try to move my /User/<username> folders outside of the boot drive. But the data files inside your User folders like ~/Documents, ~/Downloads, ~/Music, ~/Pictures can be placed elsewhere. You would just need to point your apps to those locations to access them.

SQL Adapter Crashes with large XML set returned by SQL stored procedure

Hello everyone. I'm running BizTalk Server 2009 32 bit on Windows Server 2008 R2 with 8 GB of memory.
I have a Receive Port with the Transport Type being SQL and the Receive Pipeline being XML Receive.
I have a Send Port which processes the XML from this Receive Port and creates an HIPAA 834 file.
Once a large file is created (approximately 1.6 GB in XML format, 32 MB in EDI form), a second file 1.7 GB fails to create.
I get the following error in the Event Viewer:
Event Type: Warning
Event Source: BizTalk Server 2009
Event Category: (1)
Event ID: 5740
Date:  10/28/2014
Time:  7:15:31 PM
User:  N/A
The adapter "SQL" raised an error message. Details "HRESULT="0x80004005" Description="Unspecified error"
Is there a way to change some BizTalk server settings to help in the processing of this large XML set without the SQL adapter crashing?
Paul

Could you check Sql Profiler to trace or determine if you are facing deadlock?
Is your Adapter running under 64 bits?
Have you studied the possibility of using SqlBulkInser Adapter?
http://blogs.objectsharp.com/post/2005/10/23/Processing-a-Large-Flat-File-Message-with-BizTalk-and-the-SqlBulkInsert-Adapter.aspx

Will bamboo touch and pen with lion multi touch gestures

Will bamboo touch and pen work with lion multi touch gestures just like the magic track pad?

only the new unibody macbooks were built with a multi touch macbook anything before that only have the normal trackpad with 2 finger scrolling

Reports 9i Jdbc Query dialog box

Hi,
Is it possible to base a report on a pl/sql stored procedure in Reports builder 9i environment using with jdbcpds.If possiblePlease provide step by step details and how we can call that particular procedure in JDBC query dailog box.
Please provide detailed example program asap.
Thanks&Regards,
Raghu

Hi Raghu
Indeed yes. You can base your report on PL/SQL stored procedure. For this to work with JDBC query, your stored procedure must return records.
Refer Reports help on OTN for more information.
Regards
Sripathy

Is it possible to provide an BEx Web Query with parameters based on iView?

Hi SAP Portal experts,
My knowledge of SAP Portal is limited and I ran into the following problem:
I have got about 60 BEx Web Queries which should be put into some sort of navigation. Furthermore I would like to intodruce one start page where the user can preselect common bex query variables (e.g. company code) by clicking on a map.
My approach was to put all query links into a BEx Web Application Template. The template includes a JavaScript storing the userdefined values in a cookie. As soon as the user clicks on a link the cookie values are read from that cookie and a query parameter string is set up like "&BI_COMMAND_1-BI_COMMAND_TYPE=SET_VARIABLES_STATE&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE=VARIABLE_INPUT_STRING&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE_TYPE-VARIABLE_INPUT_STRING=2100&BI_COMMAND_1-VARIABLE_VALUES-VARIABLE_VALUE_1-VARIABLE=0P_COCD" and concatenated with the URL for the BEx Query.
My colleague wants me to put all this into SAP Portal and to create an iView for each BEx Query. How can I achieve that? I have already had a look at the iView property "parameters passed on to BEx Web Application". If I put my parameter string there, it works fine. However, I would like to replace VARIABLE_INPUT_STRING=2100 and VARIABLE=0P_COCD with the values selected by the user by clicking on the map. So how can I set up a parameter or variable in one iView and read it in another iView with a BEx Web Query???
Thank you very much in advance
Martin

I have thought about this. There are some problems here....
I cannot use the same proxy to invoke the java callout and then based on the code or handler disable it, since
1) i would have no way to enable back the proxy again.
2) Also there is some amount of message loss.
So i will have to use another proxy to do the same, but in this case
1) what would be the trigger to this proxy?
2) And how often do i invoke the java callout to see if the URI is up or not? (wouldnt that affect the performance?)
I am just wondering why did they give an offline URI option in the business service and no similar option in the proxy service, Any Idea?
Thanks

BaseTableName blank when calling GetSchema on a query with multiple tables

I am using ODP.NET 11.2.0.3.0 and when calling GetSchemaTable on a DataReader that contains a join the returned SchemaTable has the BaseTableName and BaseColumnName fields blank - this is different than what I see with the Oracle OLE DB Provider and with how SQL Server's native provider works. I can't find any discussion of this - is this on purpose or is it a bug? why does the available schema information vary so drastically between a single table query and a query with multiple tables joined?
Thanks,
Bryan Hinton

Hi Bryan,
I am also facing the same issue. Did u find any work around or any suggestions will be well appreciated.
Thanks,
Naresh.

Alarm and Event Query Very Slow

Group,
I am using the DSC Alarm and Event Query vi to pull data from the SQL database (not the Citadel). I have a filter set up that specifies the "Alarm Area" and the start and stop dates with maximun results set to 22. These dates are set to only pull the last 24 hrs. This vi will return around 10 to 20 entries out of perhaps 80-90 total events in the last 24 hours in the database. This database is ~2M in size. I have to set the timeout to almost 10 min for this vi to not produce a timeout error. The results returned are correct but it just seems that the time to run this vi is excessive. It is quering a database on the same system that the quering vi is running on. Should I expect better preformance?
Thanks
Todd

Verne,
I have boiled down the code to this attachment. This query took almost 7 min to return 22 results from a database size that is listed as 2.09877E+6. I have also tried the Alarms and Event Query to spreadsheet vi also and it takes the same amount of time. I am wondering if I place the Alarms and Events into the same (Citidel) database that the traces are going if it would be much faster. I seem to get trace data back very fast. If I recall correctly I seperated the alarms from the trace because I was having some sort of problem accessing the alarm data in the combined database...but that was several labVIEW versions ago. Anyone else having this problem?
Thanks
Todd
Attachments:
Generate Alarm Log General Test.vi ‏19 KB

Infoset query with cero values

Hi
I have an infoset query that reads the information from an infoset. The infoset query is able to read the values, because it shows me values, but everything is cero, although I have values different from 0.
But if it didn`t find values it would tell me a different message as "No application data found" or something like this.
Then the problem is, my infoset read values, but everything that shows me is cero, and that´s not true.
Thanks and regards
SEM SEM

Hi,
What do you mean with the join condition ?
I have an infoset query with only one ODS inside. I didn´t want to build a query directly to the ODS as I did´t want to mark the flag available for reporting in the ODS, as it already had very importat data and I didn´t want to damage the ODS data. That´s why I have built and infoset query with one ODS inside, and in this case I don´t understand the join condition....
Regards
SEM SEM
Does anybody know something ????
Regards
SEM SEM
Message was edited by:
SEM SEM

Refreshing Hierarchy node variable in BEx query with change in hierarchy

Hi all,
We have used a hierarchy node variable on Characteristic ZECCSAC (user-defined) and used it in a BEx query with default value set to a particular node value. Upto this, it is working fine.
The hierarchy used in the query, with the hierarchy node variable, was later changed ( and in future it can undergo changes ). Since the number of records in the hierarchy are changing, the nodenames of the hierarchy nodes are changing. But the hier node variable default value is still set to the earlier nodename for that node description. So at runtime it is giving an error "ECCS Account Number is invalid"!
Can anyone suggest how to refresh a hierarchy node variable default value each time a query is run so that the latest nodename is always taken ?
Quick reply will be appreciated.
Thanks

Hi,
You get this with User exits.
Thnaks

ES 2 and JDBC: Query with a multi set return

Similar Messages

Maybe you are looking for