Esception when calling funciton module fm_name

Hello ,
I am developing print form using adobe . when i call fm_name fucntion module in my print program i get an exception 1 "usage_error" saying job is already opened .
how to resolve this ?
thanks
sneha

Hi,
Could you please check the sequence of function module calls?
FP_JOB_OPEN should be called once, followed by one or several calls of the generated function module. At the end, the job needs to be closed by calling FP_JOB_CLOSE.
Best regards,
Andreas
P.S.: Or is the form based on the Smart-Forms-compatible interface?

Similar Messages

Error BT616 when calling function module SXPG_COMMAND_EXECUTE in background

Hi All,
We use function module SXPG_COMMAND_EXECUTE with a custom command we defined in SM69 to move files in unix (mv command).
The function module call has worked fine for almost a year and recently we have been seeing an error (BT616) in our job lob (SM37) when the program is run in background. We have not been able to reproduce the error in foreground mode and it seems to be occuring only periodically in the background. (The appropriate SAP authorization objects where assigned to the batch job ID and the steps on the batch job.) We are in the process of setting up the trace flag and performing analysis on the trace log via ST11 to help identify the issue.
After perform analysis on SXPG_COMMAND_EXECUTE, the error is occurring when calling function module SAPXPG_END_XPG for exception 2, system failure, yet function module SAPXPG_END_XPG does not exist. I assume this is a program at the operating system level and is just a signature of the parameters to be passed to the operating system program.
Below is part of the SAP function module SXPG_COMMAND_EXECUTE that is failing.
* Now we have to wait for the termination of the external
* command if the caller wants us to.
    IF TERMINATIONWAIT = 'X'.
      CALL FUNCTION 'SAPXPG_END_XPG'
        DESTINATION DESTINATION
        IMPORTING   EXITSTAT = STATUS
                    EXITCODE = EXITCODE
        TABLES      LOG      = LOG
        EXCEPTIONS COMMUNICATION_FAILURE = 1 MESSAGE MSG
                    SYSTEM_FAILURE        = 2 MESSAGE MSG.
I performed a where used on function module SXPG_COMMAND_EXECUTE, and most of SAP programs call the function module with the parameter TERMINATIONWAIT = 'X', so I assume we should pass X as well.
Any ideas on what could be causing this issue?
Mike Vondran

I also remember I have this kind of issue, as I have some UNIX script at OS( UNIX) level . The problem was with the ID , as it dont have proper authorization at OS level ( UNIX ) . Please check this ID authorization. This could be the one of reasons if youre sure from SAP standpoint.
Hope thisll give you some guide line..
Thanks
Bye

Error :Required parameters missing when calling up module MARC_SINGLE_READ

Dear all,
When trying to do the production order confirmation i am getting the error "Required parameters missing when calling up module MARC_SINGLE_READ".How can this error be solved?
Thanks,
Kumar

Hi
Please activate the corresponding programs again. I think you got a short dump for this error, if yes, you can see the program's name there.
Best Regards.
Leon.

Performance issue when calling java module

Hi experts,
It takes much time to call Java module 'JBND_CRM_SVY_XSLT_TRANSFORM' from abap function module.
When I executed runtime analysis via t-cd:se30,
most of time is consumed in 'wait for RFC' .
When the java module is called, it always takes much time.
I think VMC memory management is not the cause,
because the issue also occurs at first call.
The kernel patch level is 146 of release 700.
Do you have any idea to improve performance?
Regards,
Fukuhara Yohei

Hi
try with this code
remove
READ TABLE i_events INTO wa_events WITH KEY name = 'USER_COMMAND'.
IF sy-subrc EQ 0.
wa_events-form = 'USER_COMMAND'.
MODIFY i_events FROM wa_events TRANSPORTING form WHERE name =
wa_events-name.
ENDIF.
and change alv
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = i_ztal_prof1_cat[]
i_save = 'A'
TABLES
t_outtab = i_ztal_prof1.
Marco

Problem when calling function module CV120_DOC_CHECKOUT_VIEW in background

Hi ,
I'm currently developping an abap program which extract document from KPRO for printing into a windows Folder.
For this I use standard function module CV120_DOC_CHECKOUT_VIEW.
When i run my program in foreground task there's no problem, but when i run it in background task the extract doesn't work. It seems that the system cannot connect to the Windows Network.
Whe the program is running in foreground task, the function module user SAPHHTP RFC destination, when it runs in background task it use SAPFTP destination .
Does somebody can help me ?
thanks in advance

Hi Ajay,
The program extract document into a folder on Windows Network that means on a server not on a PC .
I know that in background task ther's no connection with sapgui.
For example when i want to create a file on network n background task i use OPEN_DATASET instruction and that works fine.
My problem is the use of the standard function module CV120_DOC_CHECKOUT_VIEW in background task because when this function module is running in background task it use the SAPFTP rfc destination instead of SAPHHTP rfc destination in foreground task . I check the RFC destination , thoses works both . SO i think the problem comes from parameters given to the function module.
Regards.

ABAP Dump when calling Function Module Starting New Task

Hi all. I have a tricky situation now, I am doing a POC on parallel processing.
I am getting an ABAP dump on the following Call Function line which is in class lcl_steer_114numc (See below for full program):
METHOD start.
    CALL FUNCTION 'Z_ZZCLS_STEER_114NUMC'
      STARTING NEW TASK me->id
      CALLING me->finish ON END OF TASK.
ENDMETHOD.                    "start
However I get the following ABAP dump:
Short text
    Statement "CALL FUNCTION .. DESTINATION/STARTING NEW TASK/IN BACKGROUND TASK"
The function module only contains a wait statement to simulate parallel processing. It is strange that it dumps here, because when I change the FM call to another call that has been triggered successfully from other classes, it still produces the same ABAP dump.
The background of the Proof Of Concept is to see if I can get an event to trigger the next process that depends on the outcome of the previous process. Parallel processes are run in the start methods by calling RFC.
<Garbled code removed>
Moderator Message: Please post relevant portions of the code only.
Edited by: Suhas Saha on Jul 17, 2011 1:17 PM

Well, the thing is I did manage to run 3 other Function Modules asynchronously succeesfully prior to that function call, with the same exact function call syntax. Further more, I have tried editing it with your suggestion but I get the exact same dump.
The complete function group can be downloaded here (slinkee file):
https://docs.google.com/leaf?id=0B3sua1Bw4XK4ZmFhNzcwMTgtYzQ0Mi00NzQ4LTg5YTMtNDNlNWUxYTM2NTg3&hl=en_US
The complete program can be downloaded here (slinkee file):
https://docs.google.com/leaf?id=0B3sua1Bw4XK4YWJmNjU3ODYtODRmMy00Nzg2LThkNTUtZjNkNDRhZGQ3MTUw&hl=en_US
The complete ST22 dump can be found here:
https://docs.google.com/leaf?id=0B3sua1Bw4XK4ZDU1YmFkZDAtOTU5MS00ZTgwLWFlZTktNWZhMDUxMzJlZWNl&hl=en_US
Basically I ST22 gives me the following:
Runtime Errors         RPERF_ILLEGAL_STATEMENT
Date and Time          17.07.2011 05:29:54
|Short text                                                                                |
|    Statement "CALL FUNCTION .. DESTINATION/STARTING NEW TASK/IN BACKGROUND TASK"                 |
|What happened?                                                                                |
|    Error in the ABAP Application Program                                                         |
|                                                                                |
|    The current ABAP program "Z_ZZB1_CLOSE_PERIOD_TEST2" had to be terminated                     |
|     because it has                                                                               |
|    come across a statement that unfortunately cannot be executed.                                |
And it explains it here (but is not helpful / relevant at all) as I ran the program from SE38.
|Error analysis                                                                                |
|    There is probably an error in the program                                                     |
|    "Z_ZZB1_CLOSE_PERIOD_TEST2".                                                                  |
|    The program was probably called in a conversion exit                                          |
|    or in a field exit. These are implemented by                                                  |
|    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or                                 |
|    USER_EXIT_xxxxx_INPUT.                                                                        |
|    Conversion exits are triggered during screen field transports or                              |
|    WRITE statements, field exits during field transports from the                                |
|    screen to the ABAP/4 program.                                                                 |
|    In this connection, the following ABAP/4 statements are not allowed:                          |
|                                                                                |
I hope you try to download the slinkee files and you will notice the call function I performed was no different than the other call function RFC calls that really are working.

Error "Job already started" when calling a adobe form in Z function module

Hi All,
I have a error when calling a adobe form in a custom function module.
I am using FP_FUNCTION_MODULE_NAME to get the adobe form function module and then i am using FP_JOB_OPEN function module to control the printing parameters such as no print preview or no dialog ..etc.. I dont have any exceptions during the call of FP_JOB_OPEN function module ..
Later I am calling my function module which was generated for the adobe form and i am getting the error called " JOB ALREADY STARTED".
I tried executing the same function module in se37 and the PDF form output was generated, and also by commenting FP_JOB_OPEN function module the PDF form output was generated.
But i need the FP_JOB_OPEN function module to control the output based on the output type which triggers the form output such as the medium from nast record which says print or email or fax.. etc
Please let me know how to handling this error.

Just as a followup note. If you are testing a function module from SE37 and the test button you will get a value in SY-CPROG. You must override this value for everything to work.
If you override the value of SY-CPROG with the main program that will be calling the function module you have no problem.
John W.

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

Type conflict when calling a function module (field length)

Dear All,
            I am getting this following error while executing: Type conflict when calling a function module (field length)
This is piece of coding i have writern in my action button.
method SEARCH_MATERIAL .
data:
        node_mat_input TYPE REF TO if_wd_context_node,
        node_mat_output TYPE REF TO if_wd_context_node,
        material TYPE BAPIMATDET-MATERIAL,
        itab TYPE TABLE OF BAPIMATDOA.
node_mat_input = wd_context->get_child_node( 'NODE_MAT_INPUT' ).
node_mat_output = wd_context->get_child_node( 'NODE_MAT_OUTPUT' ).
node_mat_input->get_attribute( EXPORTING name = 'MATERIAL'
                                 IMPORTING value = material ).
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
    EXPORTING
      material                    = material
    PLANT                       = plant
    VALUATIONAREA               =
    VALUATIONTYPE               =
    MATERIAL_EVG                =
   IMPORTING
     MATERIAL_GENERAL_DATA       = itab
    RETURN                      =
    MATERIALPLANTDATA           =
    MATERIALVALUATIONDATA       =
node_mat_output->bind_table( itab ).
endmethod.
Attributes are:
Node name = INPUT its structure is BAPIMATDET
INPUT attributes = MATERIAL of type BAPIMATDET-MATERIAL
Thanks,
Gopi.

Hi Amit,
           I have used service call to fetch records from that bapi..
The following is the code generated by service call:-
METHOD execute_bapi_material_get_deta .
declarations for context navigation
DATA:
    node_bapi_material_get_de   TYPE REF TO if_wd_context_node,
     node_exporting   TYPE REF TO if_wd_context_node,
     node_material_general_dat   TYPE REF TO if_wd_context_node,
     node_importing   TYPE REF TO if_wd_context_node,
      lri_element    TYPE REF TO if_wd_context_element.
declarations for fuba parameters
data:
    stru_c_material_general_dat    TYPE if_componentcontroller=>element_material_general_dat.
DATA:
    attr_material    TYPE bapimatdet-material,
    attr_plant    TYPE bapimatall-plant.
get all involved child nodes
node_bapi_material_get_de = wd_context->get_child_node( `BAPI_MATERIAL_GET_DE` ).
node_exporting = node_bapi_material_get_de->get_child_node( `EXPORTING` ).
node_material_general_dat = node_exporting->get_child_node( `MATERIAL_GENERAL_DAT` ).
node_importing = node_bapi_material_get_de->get_child_node( `IMPORTING` ).
get input from context
node_importing->get_attribute(    EXPORTING      name = `MATERIAL`
                                                     IMPORTING      value = attr_material ).
node_importing->get_attribute( EXPORTING       name = `PLANT`
                                                          IMPORTING       value = attr_plant ).
the invocation - errors are always fatal !!!
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
    EXPORTING
      material =                        attr_material
      plant =                           attr_plant
"      valuationarea =                   wd_This->Valuationarea
"      valuationtype =                   wd_This->Valuationtype
"      material_Evg =                    wd_This->Material_Evg
    IMPORTING
      material_general_data =           stru_c_material_general_dat
"      return =                          wd_This->Return
"      materialplantdata =               wd_This->Materialplantdata
"      materialvaluationdata =           wd_This->Materialvaluationdat
node_material_general_dat->bind_structure( stru_c_material_general_dat[] ).
ENDMETHOD.
                             but the problem is I am getting the following error while compiling...
" stru_c_materialplantdata " is not an internal table - the " OCCOURS n" specification is missing.
Thanks,
Gopi.
Edited by: Yegalaivan on Nov 18, 2009 8:30 AM

ERROR: -Type conflict when calling a function module

hi to all,
when iam executing the program in browser   Type conflict when calling a function module error is showing, i have bind all the attribute correctly still iam getting error, WHEN I CLICK ON THE SEARCH BUTTON DATA IS NOT COMING TO MY TABLE ITAB1 plz help me....
DATA:
      NODE_IP_SELECTION                   TYPE REF TO IF_WD_CONTEXT_NODE,
      ELEM_IP_SELECTION                   TYPE REF TO IF_WD_CONTEXT_ELEMENT,
      STRU_IP_SELECTION                   TYPE IF_PLANNING_HISTORY=>ELEMENT_IP_SELECTION ,
      ITAB TYPE TABLE OF ZSL_PL_UPDATE1,
      WA TYPE ZSL_PL_UPDATE1.
navigate from <CONTEXT> to <IP_SELECTION> via lead selection
    NODE_IP_SELECTION = WD_CONTEXT->GET_CHILD_NODE( NAME = `IP_SELECTION` ).
get element via lead selection
    ELEM_IP_SELECTION = NODE_IP_SELECTION->GET_ELEMENT( ).
get all declared attributes
    ELEM_IP_SELECTION->GET_STATIC_ATTRIBUTES(
      IMPORTING
        STATIC_ATTRIBUTES = STRU_IP_SELECTION ).
CALL FUNCTION 'ZBAPI_PL_UPDATE'
        EXPORTING
          GV_LIFNR           = STRU_IP_SELECTION-LIFNR
          GV_MATNR           = STRU_IP_SELECTION-LIFNR
          GV_GJAHR           = ' '
        GV_WEEK_LOW        =   STRU_IP_SELECTION-FROM_WEEK
         GV_WEEK_HIGH       = STRU_IP_SELECTION-TO_WEEK
      IMPORTING
        RETURN             =
        TABLES
          GT_PL_UPDATE       = ITAB
         DATA:
           NODE_PLANN_NODE                     TYPE REF TO IF_WD_CONTEXT_NODE,
           ELEM_PLANN_NODE                     TYPE REF TO IF_WD_CONTEXT_ELEMENT,
           STRU_PLANN_NODE                     TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
           WA1 TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
           ITAB1 TYPE TABLE OF IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE.
          LOOP AT ITAB INTO WA.
           MOVE-CORRESPONDING WA TO WA1.
           APPEND WA1 TO ITAB1.
          ENDLOOP.
       navigate from <CONTEXT> to <PLANN_NODE> via lead selection
         NODE_PLANN_NODE = WD_CONTEXT->GET_CHILD_NODE( NAME = `PLANN_NODE` ).
         CALL METHOD NODE_PLANN_NODE->BIND_TABLE
           EXPORTING
             NEW_ITEMS            = ITAB1
            SET_INITIAL_ELEMENTS = ABAP_TRUE
            INDEX                =
ENDMETHOD.

CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
Problem is here
check out the type GV_GJAHR whether it accepts string type.
thanks
sarbjeet singh

Error:Type conflict when calling a function module RFC_ERROR_SYSTEM_Failure

Hi Experts,
When I run my Application in Portal, i am getting the following error.
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
When I execute the BAPI, it is getting executed.
My Bapi Strucute:
Import Parameters
IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
Tables
IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
When I import the model, i am getting the structure like this
BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
> ZMM_Input1> Parameters
This is the way, how i am executing in webdynpro java
Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
Zptip_Asset eleInputAsset = new Zptip_Asset();
eleInputAsset.setSearch("ACRS");
wdContext.nodeZptip_Asset().bind(eleInputAsset);
eleInput.setIm_Ast_Search(eleInputAsset);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
Please let me know, how to do the same.
Thanks in advance.
Regards,
Palani

Hi David,
I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
Hi Saleem,
When I changed the same, i am getting the Type conflict error,
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
Please let me know,what can be done in this regard to solve the problem.
My BAPI Structure when imported as model
SearchBAPI
--> ZMM_BAPI_SEARCH_INPUT
> IM_AST_SEARCH(zPTIP_ASSET)
>Zptip_Asset
>Search (Parameter)
> OutPut(ZMM_BAPI_Search_Output)
>IT_Asser_Rec(ZMM_Asset)
>ZMM_Asset
>TXT100 (output Parameter)
--> ZMM_BAPI_SEARACH_OUTPUT
--> ZPTIP_ASSET
>Search (Parameter)
Thanks & Regards,
Palani
Edited by: Palani Appan on Nov 11, 2009 5:31 PM

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

How to capture errors when a Function module is called as BACKGROUND TASK

How to capture errors when a Function module is called as BACKGROUND TASK?.Please advise.
FUNCTION ZRPM_DELETE_PROJECT_DATA_API.
""Local interface:
*" IMPORTING
*"     VALUE(IV_EXTERNAL_ID) TYPE RPM_TV_EXTID OPTIONAL
*"     VALUE(IV_PROJECT_GUID) TYPE RPM_TV_GUID OPTIONAL
*"     VALUE(FLAG) TYPE BOOLEAN OPTIONAL
*" EXPORTING
*"     VALUE(EV_RC) TYPE I
*"     VALUE(EV_MSG) TYPE STRING
*"     VALUE(ET_MSG) TYPE RPM_TT_MESSAGES
IF flag = cl_rpm_co=>sc_true.
    Call function 'RPM_DELETE_PROJECT_DATA' IN BACKGROUND TASK
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_RC
        ET_MSG          = ET_MSG.
    COMMIT WORK.
ELSE.
    CALL FUNCTION 'RPM_DELETE_PROJECT_DATA'
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_MSG
        ET_MSG          = ET_MSG.
ENDIF.
ENDFUNCTION.
In above code how to capture 'EV_RC' when FM is called as background task.

Prakash,
CALL FUNCTION IN BACKGROUND TASK allows no IMPORTING parameters, so that your code will produce a syntax error.
The calling program can only handle errors of remote function calls (RFC) if these are either
- synchronous RFC (that is CALL FUNCTION ... DESTINATION ...) or
- asynchronous RFC (that is CALL FUNCTION STARTING NEW TASK ... DESTINATION ...).
Both synchronous and asynchronous RFC allow the capturing of errors by means of exceptions. But that is a different topic.

TRFC type conflict when calling the function module

Hi,
When I schedule, it is stucking up with TRFC and giving error message in SM58 as" TRFC type conflict when calling the function module" .
even if I execute the trfc LUWs ,load is not successful.
could you please any body suggest for this error.
Thanks
R

Hi Guys,
could any suggest why this is happening.
TRFC is stuck up and giving error message.
Thanks
Ram

[svn:fx-trunk] 13201: Fix RTE when calling PopUpManager.createPopUp() from a module or sub-application.

Revision: 13201
Revision: 13201
Author:   [email protected]
Date:     2009-12-23 12:16:41 -0800 (Wed, 23 Dec 2009)
Log Message:
Fix RTE when calling PopUpManager.createPopUp() from a module or sub-application.
This fix adds a moduleFactory parameter to PopUpManager.createPopUp() to allow a module or sub-application to specify the style manager to be used. Modules and sub-applications should always pass a moduleFactory to PopUpManager.createPopUp() or PopUpManager.addPopUp() to ensure the correct style manager is used when looking up styles. Otherwise the parent of the pop up is used to determine the style manager.
QE notes: Please create a PerModuleStyles test that uses the new parameter to createPopUp().
Doc notes: None.
Bugs: SDK-24835.
Reviewer: Alex
Tests run: checkintests, Managers/PopUpManager
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24835
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/IPopUpManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/PopUpManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/PopUpManagerImpl.as

Esception when calling funciton module fm_name

Similar Messages

Maybe you are looking for