ESS Career and JOB error in DSM and SSO

Hi All,
I have installed ECC in WAS 6.4. All other pages are working except career and job. When I am clicko on JOB search then I am getting a popup saying :
Session Management will not work !
Please check DSM log for details.
You can turn off this alert inside 'Support Desk' -> 'SAP Application'
Afetr clicking OK it is giving message
Logon ErrorLogon requires activated Single Sign-On on this server. This is not the case. Contact your system administrator
Same server I am using as ITS server and there SSO is working. I have exported certificate from portal (WAS 6.4 java) and imported in WAS ABAP (ECC 5.0)
Thanks in advance
Raktim

The alias SAP_WebDynpro_XSS is the alias on the portal for a myERP2004 system.
If you search for the Installationguide for MySAP ERP 2004 Java components,
you will see that this includes a XSS component 5.0 and contains amongst others ESS and MSS.
This needs to be configured as well.
The other alias above mentioned need to be created on the myERP2004 system using this URL (Webdynpro Admin):
<http://<ERPserver>:<PortNo>/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenu
More information can be found here :
http://help.sap.com/saphelp_erp2004/helpdata/en/38/e8584c2a664547b60442646bee23b6/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/ca/115e4088dc0272e10000000a155106/content.htm
Hope that helps,
Kai
Message was edited by: Kai Unewisse

Similar Messages

TA38482 I have an other kind of error occuring in my Itunes program: "unknown error has occurred (-42110) what can I do!!!!! I have uninstall the program and re-installed and the error appears again, and again.

I have an other kind of error occuring in my Itunes program: "unknown error has occurred (-42110) what can I do!!!!! I have uninstall the program and re-installed and the error appears again, and again. Itunes still works, but every time I open it...the error shows up.

If your iTunes is up to date, remove the SC Info folder.

Career and Job Error - Area EMPLOYEE_CAREER_ERP2005 does not exist

Hi Experts,
We are getting following error while click on Career and Job tab on ESS. We checked in Table V_T7XSSSERARB. Entry is maintained.
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
Fatal error: Area EMPLOYEE_CAREER_ERP2005 does not exist
Would appreciate kind guidance on this.
Thanks,
Aashish

Waiting for experts comment. We checked services are defined in iViews,Pages,Roles and WorkSet but couldn't resolve issue. Entry also exist in SAP configuration.
ERROR IS AS FOLLOWS :
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Fatal error: Area EMPLOYEE_CAREER_ERP2005 does not exist
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:235)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:428)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber(FcXssMenu.java:570)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:292)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:455)
     at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:165)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:389)
     at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:546)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
Would really appreciate kind guidance.
Thanks,
Aashish
Edited by: Aashish Brahmbhatt on Oct 2, 2008 10:08 PM

E recruitment -career and job Error u201CAn internal error occurred. Please try

Hi All
The issue is E recruitment regarding career and job (internal candidate) in this page select candidate profile I am getting Error u201CAn internal error occurred. Please try again lateru201D (my client using BSP and Portal)
I was checked T- code SLG1 but it show Errors 1) Periodic service was not executed due to concurrent service2) The error occurred in program RCF_PERIODICAL_SERVICES line 41
And also I checked T u2013 code SICF for services hrrcf_start_int tested but here also getting error u201CAn internal error occurred. Please try again lateru201D
Please any one guide me for how to resolve the issue
Regards
Eshwar

Hello Eshwraj,
Please check out the following :
Please check transaction SM37 and check have you create a periodical job for program COM_SE_DISPATCHER. If this is the case this is not correct - only RCF_PERIODICAL_SERVICES has to run as periodical job which indexes the objects then.
Please delete your COM_SE_DISPATCHER job and activate the RCF_PERIODICAL_SERVICES job again and test the service run afterwards.
The services DISPATCH_CPOINTER_FOR_PUB_INT and DISPATCH_CPOINTER_FOR_PU_EXT of program RCF_PERIODICAL_SERVICES do the pre-work which means that they create the change pointers for the
postings which are then processed by program COM_SE_DISPATCHER. These services are only called by program RCF_PERIODICAL_SERVICES. COM_SE_DISPATCHER can't do that alone. Report COM_SE_DISPATCHER is
called automatically.
Best Regards,
Deepak..

Linux(RH7.3) and 9idevSuite errors (FRM-91111 and FRM-100039)

I have installed 8i and 9i(r2) on a linux server (Redhat 7.3) with databases running. I have installed the 9i Developer Suite (as oracle) in a separate ORACLE_HOME and can successfully start an xterm session, xeyes, etc as the oracle owner. Also I can start the JDev from the 9iDS install - no problem. BUT when I try to start the forms designer (f90desm.sh or f90desm) I get FRM-91111 and FRM-10039 which, from Metalink, tells me there is a problem with the X-windows and the DISPLAY value. I am using enlightenment windows manager (not gnome). Well, like I said I don't have any problem with x processes (see above) and I looked thru metalink and other newsgroups for help and have tried everything suggested. Still getting these errors.

Sorry - No solution here, but perhaps I can add some to the collection of facts
I'm just starting up this learning curve, so be gentle please.
Running SuSE 8.1, KDE3.
Installed developer from downloaded 9.0.2iDS_LINUX.cpio
to a machine with no other oracle products installed.
Had to modify ./bin/genclntsh to get it to link.
#SYSLIBS=`cat ${ORACLE_HOME}/lib/sysliblist`" -ldl -lm -lc"
SYSLIBS=`cat ${ORACLE_HOME}/lib/sysliblist`" -ldl -lm -lc -lgcc_s"
So I admit to being non-standard :(
I start the OC4J HTTP Listener, I can connect to host:8896
My $DISPLAY and xhost permissions are fine, I can run X apps and can run jdev.
./f90desm.sh
FRM-91111: Internal Error: window system startup failure.
FRM-10039: Unable to start up the Form Builder.
In the Bad old days I used to have trouble with some versions of java only working with 8 bit displays. Changed my display to 8 bit, no help.
Tried telnetting in from a SUN and running forms to it's display, same error. (yes, xhost permissions and DISPLAY set correctly and working with other remote X apps.)
Went so far as to "sh -v f90desm.sh" and cut and paste my way though it's actions so I could then "strace f90desm" to look for anything that seemed to jump out at me. I don't know enough to reach any great conclusions, but if anyone thinks it useful I can provide the output.
Suggestions?

Downloaded newest iphone 4 software when download was complete i tried updating the phone and an error came up and has completly wiped my phone and the screen is blank. what do i do?

Downloaded newest iphone 4 software when download was complete i tried updating the phone and an error came up phone wont update and has gone completly blank. what do i do?

the error message is (-1)

Sharepoint web application was unable and show error 403 forbidden and 503 server errors

Hi
i some times loose connection to sharepoint site where i am working with,i was just run some powershell scripts to update
a filed value in a document library only
and it some times show in browser 403 Forbidden error and some times 503 server error
when i check in event viewer i got this below errors
adil

That particular 'error' is OK. It just means that a non-Farm Admin service account doesn't have the rights to run that sproc. Normal with best practice security in mind.
You may want to check the IIS logs to see what the
subcode for the 403/503 errors are.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I have made attempts to upload iOS6 and an error message occurs and kicks me out?

I have made attempts to upload iOS6 to several I-Pads we use in our business. An error message comes up that an error occurred while downloading. I have made the attempts via Wi-fi and connected to I-tunes on my computer but having the same results. Any help?

What is the error message? Is it numbered?
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

I tried ugrading to the ios 5 today and got error code 1 and now my phone wont turn on. happen to anyone else?

any suggestions?

Restart computer, open current iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes reconizes iPhone in Recovery Mode, click Restore button of iTunes.

ESS : Career and job - data overview problem

Hi Experts,
I am getting error in ESS -> Career and job -> data overview.
Although SSO is successfully configures it asks for login when i click on data overview link and it always fails for login.
Please give me solution
Thanks
Sameer

Hi Sameer,
Generally this type of problem occurs when the Portal Certifcate is expired, please check the validity of Certificate.
Please check it through strustsso02 transaction.
Thanks and Regards,
Deepak..

Problem in Career and Job

Hi All,
We are facing crictical issues in career and Job after we moved all our objects to quality machine.
We are using mySAP ERP 2005 Buss pack 1.0 with ECC 6.0, Portal 7.0 SP12 and E-rec 600.
The career and Job especially - Apply Directly and candidate applications throws most of the time "Internal error occured". This error occurs with all the user ids in quality machine. This used to work properly in development.
When we check tcode - slg1 - it says the employee is not an candidate.
We identified that - before using this services an employee needs to be registered as an candidate via the report - RCF_CREATE_USER or SYN_HR_PERSON. Is that true ?
If this is the case, then we need to run this report for all our thousands of employees.
Also, after running this report for one user id and when we logged into Portal.
The user is able to apply diretly and see the candidate applications. Unless untill it keep on giving messages "Internal errror occured"
Please share your experiences. Need your valuable inputs. points assured.
Regards,
Nazeer

HI prathmesh,
After installing SAP e-Recruiting 3.00 with Support Package 1, or higher,for career and job workset related applications to work,have you made the following settings in the Implementation Guide (IMG):
1.Choose the following IMG path: Cross-Application Components ? Homepage Framework ? Resources ? Define Server for Resources. Enter the server name and the port of your e-Recruiting system.
2.Assign the server to all e-recruiting resources and add the URL parameters stored. To do so, choose the following IMG path: Cross-Application Components ? Homepage Framework ? Resources ? Define Resources.
Enter the e-recruiting server for the following resources. Add the relevant URL parameters by replacing in the BSP client the 000 client with the client of your e-recruiting system.
EMPLOYEE_CANDIDATE_APPLICATIONS_SERVICE
EMPLOYEE_CANDIDATE_DATA_OVERVIEW
EMPLOYEE_CANDIDATE_DIRECT_APPL_SERVICE
EMPLOYEE_CANDIDATE_FAVORITES_SERVICE
EMPLOYEE_CANDIDATE_PERSONAL_SETTINGS
EMPLOYEE_CANDIDATE_PROFILE_RELEASE
EMPLOYEE_CANDIDATE_PROFILE_SERVICE
EMPLOYEE_CANDIDATE_SEARCH_JOBS_SERVICE
Ho[pe this helps,
Regards,
Siddhartha

How to deactivate Filter and Job in Job scheduling?

Hi,
My scenario is:
XI will poll the file from 3rd party system and wil send to R/3 via IDOC adapter.
On every sunday , R/3 will be down for 3-4 hrs for maintenance purpose.
I need to create job scheduling in such a way that XI sould collect all the message coming on sunday during that period
of time and after endtime has reached , it should process those message and should send the message to R/3 system.
I have created Sender/Receiver ID ..also create Filter and a JOBID.
while creating Job ID i specified the following
1: Start Date    = 18.08.2009
2:Start Time     = 11.00.00
3:End Date      = 18.08.2009
4:End Time      = 15.00.00
5:Period          = 7
6:Period Unit   = D (Days)
Job should be scheduled at 11.00.00 and end at 15.00.00 ,filter and Job both should deactivate and after 15.00.00 it should process those messages.
But the problem is it doesnt deactivate the filter.
I tried using SXMS_JOB_DEACTIVATE and SXMS_START_JOB_AT_ONCE
Both deacitvtes the JOB but not filter.
Can any body tell me , how to go with it.
Also if I have to write a report, what all things are required.
regards,
Mayank

Hi Volker,
Down time for R/3 is more ..so i am not sure whether XI will trying till that time or not.
And XI is not able to than all the incoming messages in XI during that period of time will be Red Flag.
can we write a report in XI such a way that .. all the queued messages should be processed ..thorugh Job scheduling.

Frozen ipod after new updates, will not recover, error codes 1601 and 1602

i updated my ipod last night, was working fine, turned off, then on again this morning. was working fine this morning for a while, then went completely blank, will not start up, just completely dead. i have tried to restore,several times and get error code 1601, and 1602. have tried restarting my computer,checking for updates, restarting my itunes, using another computer, tried another lead, and everything else suggested by support. it will just not do anything. has anyone got any suggestions, please.

I would suggest that you put your iPod into the recovery mode and restore it. Next time something like this, it is better to start with the more basic troubleshooting steps first before trying to restore. The two easiest are restart and reset.
Try these steps with your touch.
1. Unplug the device from your computer
2. Turn the touch off - hold the Sleep/Wake button down until you see the red slider and turn the device off. Note: this may not work. If not, go to the next step.
3. Start iTunes
4. Hold the Home button down and keep holding it down while you plug your iPod back into your computer.
5. Keep holding the button down until iTunes tells your "that an iPod in Recovery mode has been detected".
6. Let go of the button and follow the on screen instructions to restore the touch.

Ho to create Mass Processing and jobs for monthly process

Hi Gurus,
I had created all activities and jobs for background run and my question is 1. how to create for mass process ?
2.Do i need to create process chains for background run for every month ?
3. How to create parallel processing as well/
Please let me know and thanks for your answers.
Regards,
Raj

Hi Raj,
Here is the link to saphelp documentation for <a href="http://help.sap.com/saphelp_scm50/helpdata/en/02/7650d6353611d398290000e8a49608/frameset.htm">mass processing</a>.
You can use a process chain and it is much easier if you want to repeat that periodically and integrate with the process steps. You have the option of creating parallel processes in process chains as well.
Here is the link to <a href="http://help.sap.com/saphelp_scm50/helpdata/en/81/ae653fac7ab21ae10000000a114084/frameset.htm">process chains</a>.
Hope this helps.

AVCHD Import Error In Log And Transfer Window

Hey,
I just bought FCE4 and also a canon hf100 camera. When i try to ingest clips from the camera (in avchd format) with the log and transfer window an error icon comes up and says : "error: no data" and the file is not successfully imported. I tried switching my audio preferences to normal stereo instead of matrix but that did not help.
Any help would be great!
Jackson

What format exactly did you shoot with that camera? What settings are you using in FCE?

ESS Career and JOB error in DSM and SSO

Similar Messages

Maybe you are looking for