ESS US Addresses - Hide Review Button

Hello Experts,
I'm currently working on an ESS DC for BP 1.0 (ERP 2005), specifically the US Addresses webdynpro application (essusaaddr) and my requirement is to show the Edit Screen differently, according to the different Infotype 0006 subtypes available in the Bizcard overview screen.
I got this done by verifying which is the active subtype and depending on this, I change fields atributes accordingly (e.g. Read Only, Invisible).
Problem is that for one specific subtype I need to hide the Review and Save button, because this subtype is all read-only. And I cannot find the application's buttons anywhere, so I don't know how to act upon them...
Bottom line is: where can I find the buttons for the Bizcard view and Edit view for the ESS US Addresses application? Anyone?
Thanks a lot in advance,
Antonio Caldas

Hi Guys,
Thanks for your replies.
I'm sorry but I think I wasn't clear enough. The question is not hiding a button or label using the FPM personalization features. The question is that for the US Addr application, only one Edit view is provided, ao all subtypes existing in the Overview Screen point to it. The result is that if I hide the "Review" button in the Edit view, this will apply for all subtypes. And my requirement was only to hide the Review button for 2 specific subtypes.
So the only way I managed to solve this by modifying the standard us~addr webdynpro application, using code logic.
Thanks again for your replies,
Antonio

Similar Messages

Hiding fields in Review button in ESS iviews

Hi All,
In ESS iviews, say Communication Address under Personal Information, have hid some fields (ctrl+rt click) which were not needed it goes fine till i click Review button.
After i click Review button to come under Review and Save roadmap, all the fields are again visible in disable mode.
Can you please help me in resolving this issue.
I need to hide some fields which are not needed permanently from the iview.
Thanks and Regards
Piyush

Hi
In content administration go to that iview, preview it and click CTR+Right click it open's personalization editor from there you can hide the tab's and can change the text in that iview. this works for only ESS iviews
Regards
Mahesh

SAP WebGui - Hide "Standard buttons"/ "Address/navigation bar"

Dear,
We would like to use the WebGui for some HR transactions.
To prevent some wrong operation executed by users like selecting "Back" button and "forward" button of Web browser (IE or FireFox), we would like to hide "Standard buttons". To prevent also any URL modification, we would like to hide the "address/navigation bar" and if possible the "menu bar (File/Edit/view/Favorites)"
Could you please provide us your help?
Thank you,
Regards,
Z. Lamarti

Hi Z. Lamarti,
I can assist with two out of 3 requests. However your request are really IE / FIREFOX rather than ITS/SAP
First read the following WIKI in relation to:
"To prevent some wrong operation executed by users like selecting "Back" button and "forward" button of Web browser (IE or FireFox), we would like to hide "Standard buttons"
The following has nothing to do with the Browser buttons - but helps in restricting the access of the ESS services accessed via the ITS
[How to terminate a user session with integrated ITS when the transaction |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=25427]
AND
[Article - Employ SAP GUI for HTML instead of an Internet service |http://wiki.sdn.sap.com/wiki/display/HOME/Article-EmploySAPGUIforHTMLinsteadofanInternet+service]
RE URL's
Rather than hiding the bar - could use a Reverse Proxy. The SAP WEB Dispatcher can be used for this function.
See:[SAP Web Dispatcher |http://wiki.sdn.sap.com/wiki/display/SI/SAPWebDispatcher]
In order to secure your SAP system you can put an SAP Webdispatcher (or application gateway like a reverse proxy) in the outer DMZ, which filters the incoming requests and forwards them to the corresponding application servers.
Regards,
Oisin
Edited by: Oisin ONidh on May 30, 2011 4:10 PM
Initial URL's had a strikethrough in them

Adding Validations at ESS Review button

Hello,
I am on EP7.0 ERP05 and NW04s and trying to add validations on the Review event of the Banks Detail screen like making a checkbox as mandatory which I added on the screen .... and restricting the Dollar Amount field on the screen not to be less than 10.....I wonder how can I acieve this when the Review button is a part of the FPM(Floor Plan Manager) in the ess~per application ....I have also deployed the Self- Service Administrator Role on the portal for this ........but don;t know how to useit ...
Any help would be highly appreciated.

Hello
Thanks for the reply. But actually I am adding my own checkbox on the screen and want to make it mandatory rather than making the fields as mandatory ...
Looking forward to your reply.

How to hide the button in ESS service PZ01?

Hi ESS experts,
In the 'Who's Who' service, when we got a person after search, there is a button 'Org Structure Chart' for the person. Since we didn't setting up the chart, it won't show anything. Do you know where can I hide this button? I haven't found it in the IMG 'Who's Who' configuration.
Thanks a lot.
Best regards,
Johnson

Hello Om,
Thanks for the reply. Actually we don't ant to give the personalise option to the users therefore don't want to use the CTRLSHIFTRight Mouse Click for hiding buttons..
if there is some personalize option valid for the entire portal ,then we can go for it.
Looking forward to your reply.

Unable to Hide *Review and Save* step using personlization

Hi,
using personlization we want to hide * Review and Save* step in bank information iview under Personal Information.
FYI...
Step 1) click on Content Administration
Step 2) Expand Portal Content
Step 3) Expand Content Provided by SAP
Step 4) Expand End User Content
Step 5) Expand Employee Self Service
Step 6) Expand Roles
Step 7) double click Employee Self service
Step 8) Expand Personal Information
Step 9) Select the Personal Information page and click on preview buttonStep
Step 10) In the popup window click on Bank Information
Step 11) select Review and Save and control right click to open the
Personalization window
step 12) In the Personalization window, select Review and save and
select the radio button visible No and click on the Apply Button.
Step 13) As a result the following error screen is displayed
java.lang.IllegalArgumentException: Name portal_content/com.sap.pct/srvconfig/com.sap.pct.erp.srvconfig.ess.employee_self_service/com.sap.pct.erp.srvconfig.in/com.sap.pct.erp.srvconfig.bank/com.sap.pct.erp.srvconfig.fpmapplications/com.sap.pct.erp.srvconfig.per_bank_in/com.sap.xss.config.roadmapsteps/r3 is incorrect. It must only contain a..zA..Z0..9._-$ symbols.
    at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.checkCreate(DelegatorRepositoryModelClass.java:400)
    at com.sap.tc.webdynpro.repository.model.DelegatorRepositoryModelClass.createRelatedModelObject(DelegatorRepositoryModelClass.java:318)
    at com.sap.tc.webdynpro.progmodel.personalization.ViewPersonalization$Implementation.createInElements(ViewPersonalization.java:128)
    at com.sap.tc.webdynpro.progmodel.view.ViewElement._getPersonalization(ViewElement.java:318)
    at com.sap.tc.webdynpro.progmodel.view.PersonalizationHelper.setOverriddenProperty(PersonalizationHelper.java:942)
Thanks,
vijay.

Hi Vijay,
To edit the text you can follow the method or follow Note 1234273.
And For making any changes to the roadmap you might want to look at modifying it from Self Service Administrator.
Check the below links on more info on SSA.
http://help.sap.com/saphelp_erp2005/helpdata/en/43/3b6c0cfa6c1bcbe10000000a1553f7/frameset.htm
http://help.sap.com/erp2005_ehp_03/helpdata/EN/bf/a74fecb9434fe7bd760c75db094366/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/6a/3e47d0a0dc4abaa58f93689a077334/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/07/acc80592b4451badb0f90ccd3bc55b/frameset.htm
Hope this helps.
Cheers-
Pramod

Hide next button ?

Hello everybody,
I'm having some trouble to get my captivate project to work as we want.
let me explain : I have many Quizzes dispatched in many question pools, and I want to hide the 'next' or 'ignore' button while quizz is not complete, but the problem is that you can't decide to do anything differently between the quizz and the quizz review.
I tried to hide next button UNDER the send button so it appears when you reviw but unfortunately captivate developpers decided to put the nex button OVER the send button and give us no way to change that.
Does anyone have a clue to help me do what I want ? I don't understand how nobody ever came through this problem before.
I explain again : i want users not being able to skip questions, and i want them to be able to review quizz normally, but if you don't put the next button in the quizz it wont appear during review so users won't be able to rewiew it.
Mant the more I use this software the more I hate it, please save me and give me a clue to do what I want, it seems so logic ...

The buttons on the Question slides have a stacking order, indeed. My tip is to hide the Skip button by dragging it under the Clear button, which is higher in the stack. Offering the user the ability to clear their answer in case they made a mistake is something rather different than letting them skip quesitons. And mostly I will rename the Skip button to Next, because it will be only visible during Review where it has the function of a Next button.
More details about the functionalities of Question slides and tweaking possibilities in two blog posts:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
I never understand why people 'hate' software, I really like Captivate because of its versatility.
Lilybiri
BTW Welcome to the forum, but please quit hating

How can I hide a button with javascript in Captivate 8?

I need to run some javascript in my project and at the same time I want to hide a button, so I can't use advanced actions.

It is very strange, most users who have focus on JS try to do everything with it, whereas lot of simple actions can easily be done with advanced/shared actions. I will only go to JS when it is not possible with advanced/shared actions.
You are lucky, I was just restarting to work on an advanced training for next week when your question showed up.

How to hide 'SAVE' button in adobe form layout

Hi Friends,
I have a requirement to hide 'SAVE' button in adobe form layout .They dont want to save the form .
Is there any way to achieve this .I have gone through scn ,but couldnt find the proper solution
Thanks and Regards,
Subeesh Kannottil

Hi Subeesh,
Are you talking about restricting the User from Saving the Adobe Form Output.
Regards,
Sivanand Ala

How to Hide advance button in input list of values Popup

I am using input List Of Values component to select value from search Pop up, in that popup i need only basic search only , i am unable to hide advance button... plase tell me how to hide this advance option

I haven't tried this, but check
How to remove basic/advanced button in inputListOfValues search dialog
This does not have complete solution, but might give you some lead.

Using jQuery to hide a button (wrapped in td tag) based on attribute value (name in this case)

I have simulated what I'm trying to do here:
http://jsfiddle.net/dayjuuk5/
Let me know if you can't see it for any reason.
My question- I'm not sure I understand why this method of hiding this td tag doesn't work. I'm looking for a way to hide this button on page load (not click driven).
Thank you for your time.
Samir

Hi Samir,
Thanks for your sharing.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

SHOW ALL / HIDE ALL BUTTONS produce error in chm but not in "View Selected Item"

My SHOW ALL and HIDE ALL buttons work in the View Selected
Item mode. However, the compiled version generates an error tag:
Line: 72
Char: 1
Error: Object expected
Code: 0
URL:
mk:@MSITSTORE:C\Documents%20and%20Settings\glenn_michaels\RoboHelp%206.0\TCA\!SSL!
In short, the the compiled chm is located in the SSL. I tried
adding showhide.js and ehlpDhtm.js to the SSL folder, but that
didn't make a difference. What is missing? How do I fix this?
Many thanks in advance...
glennito

Mr. Grainge,
I've tried to follow your instructions to the letter, but I'm
not having any luck.
1) I copied the showhide.js to
a) RoboHelp 6.0 > Project Folder
b) RoboHelp 6.0 > Project Folder > SSL
c) RoboHelp 6.0 > Project Folder > SSL >
MicroSoft_HTML_Help
2) I pasted btnhideall.gif, btnshowall.gif, printerblue.gif
into
a) RoboHelp 6.0 > Project Folder > SSL
b) they are also listed in RoboHelp 6.0 > Project Folder
3)The Project Manager > Baggage File originally displayed
a
a) Project (Name) folder
b) ehelp.xml
c) RoboHHre.Ing
I opened the Baggage File > Project (Name) folder,
selected New Baggage File, and added, respectively:
i. btnhideall.gif
ii. btnshowall.gif
iii. ehlpDhtm.js
iv. printerblue.gif
v. printerred.gif
vi. showhide.js
vii. TCA.fpj
vii. root.fpj
4) I also opened rhbag.apj in Notepad. It shows
a) ehelp.xml and RoboHHRE.Ing accompanied by
<usercreated>false</usercreated> tags
b) the remaining baggage files are accomanied by
<usercreated>true</usercreated> tags
5) Finally, I used Notepad to display two topic files in
which the error message identified a Line: XX. In one case the line
# is 42, in another, 19. In both cases, when I counted lines,
starting with <body>, I ended up on:
onClick="JavaScript:hideEm()"
However, I am none the wiser for my effort and don't know
what (5) might be telling me.
6) The only thing I can think of is that the compiled chm
file is two levels away from the Project Name directory that holds
all the files. The files live in Robohelp 6.0 > Project Name
while the compiled help is found in Robohelp 6.0 > Project Name
> SSL! > MicroSoft_HTML_Help > Project Name.chm.
Should I be adjusting the Relative Path within the topics?
Many thanks for your attention and assistance.
glenn

How can I add a review button on my podcast

How can I add a review button on my podcast, so I can see it on my iphone or itouch?

You must create a custom signature.
Find a guide here

JavaScript in the PDF can hide toolbar buttons

Hi Leonard,
You mentioned in http://forums.adobe.com/message/2161074#2161074 that "JavaScript in the PDF can hide toolbar buttons."
According to the Javascript docs for Acrobat 7 the App.HideToolbarButton function only runs at AppInit. Which means that I would have to have the javascript in a file. How can I do that from within the document? Is there another way to to do set this from our web application?
Rob

Perhaps that's simply a feature that isn't supported by presenting a Captivate intended for the web from inside a PDF?
Just guessing... Rick

How to hide default buttons on WD selection screen

Hi Experts,
Is there a way to hide default buttons ( Cancel, Check, Reset, Copy ) on web dynpro selection screen ??
Please let me know how can I achieve this..
Thanks in advance !
Anand

By selection screen do you mean the select-options reusable component? If so, then there is an API of the component that you can call to disable these fields. Use the SET_GLOBAL_OPTIONS method of the select-options API to acomplish this:
data: l_ref_cmp_usage type ref to if_wd_component_usage.
l_ref_cmp_usage =   wd_this->wd_cpuse_select_options( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
    l_ref_cmp_usage->create_component( ).
endif.
wd_this->lv_wd_select_options =
       wd_this->wd_cpifc_select_options( ).
* init the select screen
wd_this->lv_sel_handler =
       wd_this->lv_wd_select_options->init_selection_screen( ).
wd_this->lv_sel_handler->set_global_options(
    EXPORTING
*      i_display_btn_cancel = ABAP_TRUE    " Displays "Cancel" Button
*      i_display_btn_check   = ABAP_TRUE    " Displays "Check" Button
*      i_display_btn_reset   = ABAP_TRUE    " Displays "Reset" Button
      i_display_btn_execute = abap_false    " Displays "Apply" Button

ESS US Addresses - Hide Review Button

Similar Messages

Maybe you are looking for