Essbase Adapter Question

Hi All,
A small problem (I think it is): in the Workbench I only have one Essbase Adapter, however in the Web client I can see 2. One of them is showing as Global.
Any help appreciated.
Thanks
Mark

Sorry, I should have been more precise!
I am creating a new FDM application that involves integration from an Oracle ERP. In the Workbench I have added 3 adapters: ES11x-G4-E, PULL-G4-B and ERPI-FIN-A. When I go to update the Control Table in the adapter drop-down I can see 2 Essbase adapters:
[Global] (ES11x-G4-E) and ES11x-G4-E
Interestingly, when I select the non Global adapter the selection reverts to the Global option.
Many Thanks
Mark
PS v11.1.1.3

Similar Messages

Essbase Adapter ODI Problem

Hi, first i wanna say sorry if i post in the wrong section. I cant find ODI section, n since i have a problem with Essbase Adapter in ODI, so i just post here.
I wanna ask 2 things:
First is regarding the Reverse Engineering in ODI from Essbase. Sometime i cant reverse Essbase Application, but sometime it was success. Is this the problem of the adapter?
Second, when i wanna load the member from an oracle database to Essbase, i always getting the same error message.
org.apache.bsf.BSFException: exception from Jython: Traceback (innermost last):
File "<string>", line 61, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [RULES_FILE] for Load option [null]
     at com.hyperion.odi.essbase.ODIEssbaseMetaWriter.validateLoadOptions(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseWriter.beginLoad(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx14.f$0(<string>:61)
at org.python.pycode._pyx14.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(Unknown Source)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Invalid value specified [RULES_FILE] for Load option [null]
     at org.apache.bsf.engines.jython.JythonEngine.exec(Unknown Source)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
wat is the cause of this? and does ODI only accept the parent/child load rules? and does Essbase has it own CKM?
thanks.

better if you try on odi forum:
Data Integrator
To your questions:
there is no specific CKM for essbase;
you can define target/source options (IKM) when you design the Interface Flow.

How to use accumulate in file functinality for Essbase adapter

Hi Folks,
I need to load Head count file to a Planning application via FDM.
In which for a specific location i need to use "Accumulate in File" while loading data, which is not available for Essbase adapter.
Please some one help me to implement the functionality in FDM.
Thanks in advance.

Use an Essbase Load Rule as the FDM method to load (Integration Setting --> Enable String Load) the data and in the Load Rule itself set the data optoion to 'Add to existing'

Issue with HAL essbase adapter

Hi Experts
I have an issue with HAL,I got the below error when I tried to use essbase adapter, the HAL version is 7
java.Lang.NoClassDefFoundError
I know this is known error ...most of the forums are telling this is error related to Environment Variables...but I dont know how to fix as I am unaware of this....java..... classes..bla bla bla..
I installed HAL in c drive, Can anyone help me ...how to fix this issue....
Thank You
M.S

Go to control panel->system->system properties->advance->environmental variables. You should have something like this "C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter" in your classpath variable. Check you installation on your "C:\" drive to get the correct path. Hope this helps.

DCOM Component Not Found after Essbase Adapter Configured for FDM 11.1.2.2

We are migrating FDM from version 11.1.1.3 to 11.1.2.2 following the official guide.
After schema update, we can log in to the FDM Workbench fine, but we are having trouble when upgrading Essbase adapter.
The existing adapter is outdated (for Essbase 11.1.1.3), and we followed the document to import, register, configure new Essbase adapter.
However, after machine profile, adapter options (which application to connect and so on) are set, we tried to configure dimension mappings.
In the "Target Dimension" field in the "Dimension" tab of adapter configuration window, it only shows "Connection failed." in the drop down list.
Then we discovered that we need 32-bit Essbase Runtime client after reading an Oracle KM Article, then we copied it from Essbase server and set the environment variables.
After doing so, and register the adapter again, now the dimension is shown in the pop-up window when configuring dimension of the Essbase adapter.
The progress of our FDM adapter registration:
1. Import the adapter ES11X-G4-J.xml in FDM workbench.
2. Put the upsES11XG4J.exe file under <EPM_Oracle_Home>\common\EssbaseRTC\bin
3. Create a system environment variable ESSBASEPATH with value "<EPM_Oracle_Home>\common\EssbaseRTC\11.1.2.0" and add following value to PATH environment variable: "<EPM_Oracle_Home>\bin-32; %ESSBASEPATH%\bin; <EPM_Oracle_Home>\products\Essbase\EssbaseClient-32\bin", where the <EPM_Oracle_Home> resemble our EPM location.
4. Register the adapter from "File -> Register Adapter" in workbench and select the upsES11XG4J.exe file.
5. Executed "Run -> dcomcnfg" trying to update the launching user right for corresponding DCOM component (upsES11XG4J.cluHypWindowEB) but could not find it there.
Does anyone encountered this situation before?

Thanks Jeff.
Sorry I didn't notice your reply here, since Oracle Support has answered that for Windows Server 2008 R2, this step is no longer needed when configuring FDM Essbase Adapter. That's sweet.
Warm Regards,
John

Essbase Adapter - Intersection validation report

Is it possible to enable an intersection validation report with the essbase adapter? Otherwise I dont see my errors until the export stage

No, you will need to write a custom script to accomplish this.

Issue with Essbase adapter Integration

Hi Experts,
I have installed & configured Essbase adapter ES11X-G4-H in Workbench client. I am able to map the Taget Dimensions in workbench but when I move to FDM webclient >Activities>Map>TargetEBAccount and browse for target values I recieve "Error: Essbase API Procedure: [EsbInit] Threw code: 1030803 - .At Line: 124"
Variable values:
Path:
E:\Oracle\Middleware\EPMSystem11R1\bin-32;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Server;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Client;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Common;E:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;F:\app\client_64bit\11.2.0\bin;E:\app\sunaina.taneja\product\11.2.0\client_32bit\bin;E:\app\oracle\product\11.2.0\dbhome_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\PROGRA~2\PROACT~1\Agent\server\bin;E:\Oracle\Middleware\ohs\bin;E:\Oracle\Middleware\ohs\opmn\bin;E:\Oracle\Middleware\ohs\opmn\lib;E:\Oracle\Middleware\ohs\perl\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin
ESSBASEPATH: E:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC/11.1.2.0
I am working on version 11.1.2.1. Please suggest the possible resolution.
Thanks
Shipra
Edited by: user10491593 on Oct 17, 2012 10:31 AM

Thanks for your reply. As you suggested
On 64bit system
<EPM_Oracle_Home>\bin-32;%ESSBASEPATH%\bin;<EPM_Oracle_Home>\Products\Essbase\EssbaseClient-32\bin
Path variable set accordingly as I mentioned in my first post:
starting with:E:\Oracle\Middleware\EPMSystem11R1\bin-32;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin
ends with: E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin
Please let me know if I am getting this wrong.

Hyperion hal essbase adapter error

hi all,
when using HAL, palnning componnent is working fine.
When tring to use essbase adapter, I recieve an error: exception #1 error code 1000 could not create session
i'm so Desperate.
please Help!
Thanks,
Wendy :)
Edited by: 956623 on 07:25 03/09/2012

Hi,
This is usually path/classpath problem.
Ensure the following environment variable references exist on each machine running HAL and the Essbase adapter.
To view/set the environment variables, navigate to My Computer -> Properties -> Advanced -> Environment Variables.
User CLASSPATH:
<HAL_Install_Path>\vbis\Hyperion\EssbaseAdapter
System or User PATH:
<HAL_Install_Path>\vbis\Hyperion\EssbaseAdapter\adm
Cheers
John
http://john-goodwin.blogspot.com/

Essbase adapter Not found

I just setup a new application and am trying to add the Essbase adapter to it. I goto file -> Import but ES11x-G4-E.xml is nowhere to be found.
On a slightly tangential note, I am setting up this application because I want to load data from EBS to Hyperion Planning. I figured the data gets loaded to Essbase. Can someone verify this?

Hello,
Unfortunately the .XML file is where ever you downloaded and extracted the adapter too. All adapters are not available to all customers (due to licensing and purchasing agreements) and therefore must be downloaded/extracted/installed seperately.
Yes data is loaded to Essbase. Planning is merly a web-interface to the Essbase data. Planning holds ZERO data.
Thank you,

External preview display via. Mini-DVI to video adapter QUESTION

Hello, I have been browsing this forum for a while, and this is my first question.
I have a Macbook Core2duo running Final Cut Pro. I purchased a Mini-DVI to S-video/composite video adapter.
I cannot get my work to preview on this external monitor. I would like to view the canvas on the monitor while working. I had this setup at school on a G5, but I cannot get it to work on my macbook. The only way apple suggests doing this is by setting up a camera via. firewire and then run from the camera to the NTSC video display (television). I would just like to do it via. mini-dvi to my television for previewing.
Any help is greatly appreciated. Thank you,
Morgan Bressler

From what I've been told, using the computer's video output isn't outputting a true NTSC picture. I was told when talking about how the Macbook Pros dropped the S-vdieo port that I shouldn't use that anyways, but rather to go the firewire route. THat was actually converts the video source to true NTSC instead of taking a computer output to a TV. While I have no doubt that it works, I'm willing to bet that you'll see a noticeable difference between the G5 S-video and your MB using firewire. Most consumer camcorders from the past several years do digital (firewire) to analogue (NTSC) conversion, so you probably don't even need a new box.
-Brian

DVI to ADC Adapter question

I've got a Quicksilver 933 (2002) and want to get the ATI Radeon 9600 Pro PC & Mac Video Card. I have a 17" Apple Cinema Display and want to add the new 20" Apple Display for an extended desktop. The ATI card has 2 DVI outs. I will need a DVI to ADC adapter. My question is, the adapters (see below) say they are good for connecting to DVI-D out and the 9600 card is DVI-I. Does this make a difference? Does anyone out there have experience running a set-up like this? I would hate to spend $200. on this card and $80. on the adapter only to find out I couldn't use the 17" Display.
My other choice is the 64MB ATI 9000 Pro Mac edition. (This has both a DVI out and an ADC out so I would save ~$200.) I will not be doing any gameing, just extended desktop work with Photoshop, Flash and Dreamweaver. Would there be any noticeable difference between the 9000 and 9600 in these activities? As always, thanks for your input.
AddLogix DVI - ADC Video Adapter
Addlogix's DVI-D to ADC adapter allows Apple ADC LCD monitors to be connected to virtually any DVI computer systems and retain the USB hub feature as well. The adapter combines the DVI and the USB signals from your computer and provides DC Power to the Apple Display.
http://eshop.macsales.com/item/AddLogix/MCADVIADC/
Dr. Bott's
DVIator, DVI to ADC adapter
http://www.drbott.com/prod/db.lasso?code=0111-DVAD

Hi Justin,
Can I further the questioning instead of starting my
own new thread?
No, worries, Mate!
I am in a similar situation.
I have a 2003 Quicksilver 933 with dual display
currently running.
(Using a 17" Apple Display & a 17" Sony CRT).
I eventually wish to either upgrade to a 20+ cinema
display and use the 17" Apple display as my extended
desktop, but that may still be down the road a bit.
Until then, Im looking to ditch the CRT for a 15 (or
so) LCD to dave on desktop space and make an attempt
to match the 17'' Apple Display.
Ok, on to the question.
I purchased a ATI Raedon 9800Pro Mac Edition and then
noticed it only have two DVI connections. This won't
be a problem for the eventual LCD upgrade (which has
DVI connection), but I need to purchase a DVI to ADC
convertor for the 17" Apple display.
The Radeon 9800 has DVI and VGA and S-Video output, I believe. If you want to run 2 LCD monitors, one of them will have to have a VGA input (which you can't get on Apple monitors).
1) Can I expect any loss in quality/performace due to
the conversion between DVI and ADC?
No, if the adaptor funcftions properly, there is no loss from DVI to ADC.
2) I believe there are mulitple brands out there
doing this conversion. (Apple, Geffen, etc..) Any
brand looking to be more preferred over the other?
The Geffen adaptor is presently the only one which will support the 17" ADC CRT studio monitor (as well as the ADC LCD monitors).
3) With the convertor will I still be able to power
my mac on and off with the use of the display power
button?
You can power the Mac on, however, some adaptors don't allow you to power it off.
Thanks for any help.
Justin
Cheers!
Karl

DVI to ADC adapter questions ...

I just purchased a Mac Mini and decided to use my existing (and well loved) Apple display monitor. I read up on what I needed to make this happen. Purchased a used DVI to ADV adapter. The plan was to put the adapter on a switchable power strip and power down the adapter when not in use. The adapter doesn't seem to like that. I have to restart the Mac Mini a couple times in order for the monitor to boot up.
My question is ... Does the power need to remain ON constantly on the DVI to ADV adapter in order for the monitor to fire up the first time? OR am I having issues with the used adapter?
I appreciate the info and suggestions!
Mike

I believe I have figured out the solution!
It's the order the items are activated.
FIRST I start the Mac Mini ... than I turn the power strip ON for the adapter.
It seems to have fixed the issue!

Mail adapter question

I have a question regarding the mail adapter scenario. Firstly data goes to ECC and some validations are performed and if there are any errors, ECC will provide me with some indicator saying this record has errors.
Now, the same structures are used in the opposite direction and I have to count the number of error records based of that and send that info as an email. If I created a UDF to count the number of error records, how do I put that information in the email ?
Is there anyway, I can capture that info in the mail adapter ?
Any useful links will be appreciated.
-V

being from a Java background is that every method/function declaration is supposed to have the return type and I was told that behind the scenes Java is being run which is why I assumed that thats a return type.Again, I am fairly new and I am in the process of learning things.
For simple UDF (cache = Value), returns string.
For advanced UDF (Cache = Context or Queue), returns array of strings.
The problem is I did not understand the use of ResultList class in this case.
Refer this -
http://help.sap.com/saphelp_nw04/helpdata/en/7d/028c4057d5701de10000000a1550b0/frameset.htm
use queue execution types but I am a little bit confused as to the usage of that.
Because of u201Cqueueu201D function, the arguments that we define automatically become arrays, because PI is assuming that we want to operate on multiple input values with this function. That's the reason you are able to traverse through each and every value of the field "ecode".
Any useful example would be appreciated.
Refer this:-
http://wiki.sdn.sap.com/wiki/display/XI/JAVAFunctionsin+XI
http://help.sap.com/saphelp_nw04/helpdata/en/40/7b8e40496f6f1de10000000a1550b0/content.htm
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=79955426
I am fairly new and I am in the process of learning things.
No short-cuts study and hands-on.

JDBC adapter questions

Hello all,
I have been playing around with the JDBC adapter on my XI sandbox to figure it out. I read through a few guides and I almost have a good handle on it, but there is still a big question lingering. I have configured an example scenario in which I would like to pull data out of the USR01 table from the XI database and transform some user data and place it back in the same table. I was able to get my connections correct and have the communication channel successfully execute SQL statements to alter the data. For example, my <b>Query SQL Statement</b> in the sender communication channel is as follows:
SELECT * FROM USR01 WHERE BNAME='ZTEST2'
And the <b>Update SQL Statement</b> in the sender communication channel is:
UPDATE USR01 SET BNAME='ZTEST' WHERE BNAME='ZTEST2'
This works fine and when I go to transaction se16 and pull up that table I see that the username gets modified when the interface is activated. However, I haven't really figured out exactly how to configure the communication channel / data types so that I can run a SQL statement that will populate my data type that I created for mapping. In other words, lets say I created a data type that looks as follows:
mt_sender
    row
         MANDT
         BNAME
         STCOD
And I want to populate that data type with data from the USR01 table (in the corresponding fields), what would my SQL statement look like in the sender communication channel? I read a few weblogs on how to do scenarios like this, so I built my receiving Data Type to look like this:
mt_receiver
     STATEMENT
          ROW
               action
               TABLE
               access
                    MANDT
                    BNAME
                    STCOD
But I still don't understand how exactly XI correlates the data types / mapping and transformations to the SQL statements....
I'm having a hard time putting this into words, but basically I'm asking a rather high level question I think. How does XI relate the data types to the data it pulls from the SQL statements? How do I actually get the SQL statement to populate my data types so I can do mapping and then repopulate the database table again? Does this make sense?

Hi Harrison,
      Also check out these JDBC structure links related to your question:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/4d/8c103e05df2e4b95cbcc68fed61705/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/4d/8c103e05df2e4b95cbcc68fed61705/frameset.htm</a>
Regards,
Subhasha Ranjan

File adapter questions (beginner)

Hi everyone,
I two questions on two topics about file adapter.
1. I have set up a File adapter for a CSV file to be the input file of my process. Now I would like to have an XML file as the input file, but the content is always ignored.
here is the XSD :
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:Employees" xmlns="urn:Employees">
<xs:element name="Employee" type="EmployeeType"/>
<xs:simpleType name="InitialType">
<xs:restriction base="xs:string">
<xs:maxLength value="1"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="AgeType">
<xs:restriction base="xs:integer">
<xs:minInclusive value="18"/>
<xs:maxInclusive value="50"/>
</xs:restriction>
</xs:simpleType>
<xs:complexType name="EmployeeType">
<xs:sequence>
<xs:element name="EmployeeID" type="xs:string"/>
<xs:element name="FirstName" type="xs:string"/>
<xs:element name="MiddleInitial" type="InitialType"/>
<xs:element name="LastName" type="xs:string"/>
<xs:element name="age" type="AgeType"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
And now the sample XML file :
<?xml version="1.0" standalone="yes"?>
<Employees>
<Employee>
<EmployeeID>1</EmployeeID>
<FirstName>John</FirstName>
<MiddleInitial>N</MiddleInitial>
<LastName>Smith</LastName>
<age>24</age>
</Employee>
<Employees>
How can I do that ? Do I need the Oracle XML Gateway ?
2. In the BPEL console, I can trace the successfull processes. Alright ... But when I put in a file with the wrong format (eg: missing fields), the process does not even appear in the console. How can I trace them ? (completionPersistPolicy is "on").
Thank you :)

I'm interested in 2 question (missing fields) too.
Ema

Essbase Adapter Question

Similar Messages

Maybe you are looking for