ESSBASE V9 run away query
Hi
I have noticed that if you use a calc script to export your database from a Block storage cube, you can create a run away query. I was missing a parameter and ran a query to export some data - it just kept running, even after I tried to terminate it. is there a way to stop the query without having to bring down the server?
I would doubt that the data could of caused this issue, I would of thought the problem would lie down to either metadata changes or the database compression changing.
If you want to start the database up again, first make sure there is no ghost esssvr process running, if the database crashed it could leave a ghost process running and it will stop the database starting again, kill the process try again.
If it doesn't work you could restore the db from backup.
Or if you want to just clear the data, delete the ess**.pag ess*.ind and .esm files and start up the application, then reload the data.
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
REGEXP_LIKE runs away when pattern is not found
I am using the following in my pl/sql code:
regexp_like(l_formatted, '^[\_]*([a-z0-9]+(\.|\_*)?)+@([a-z][a-z0-9\-]+(\.|\-*/.))+[a-z]{2,6}$')
It validates e-mail addresses. When the pattern is found (the e-mail is valid) the performance is fine. When the pattern is not found the query takes at least 50 seconds and in a few cases has actually "run away". Has anyone else exprienced this problem?When the pattern is found (the e-mail is valid) the performance is fine. What's the execution plan?
When the pattern is not found the query takes at least 50 seconds and in a few cases has actually "run away". Are you using Con*Text indexes?
http://www.dba-oracle.com/t_regular_expressions_tuning_index.htm
In some cases you can also index regex with FBI's. But regular expression are notorious for causing full-table scans on multi-million rows tables, and special care must be given to creating matching function-based indexes to keep performance at an acceptable level.
From a performance perspective it’s important to properly index the Oracle tales so that regular expression validation does not cause problematic full-table scans. Oracle syntax allows the use of function-based indexes (FBI’s) to minimize the amount of database I/O associated with a invocation of a regular expression.
Function-based indexes cannot work for all regular expressions, however, and it can be tricky to remove unnecessary full-table scans on some regular expressions, especially regexp_like.
Hope this helps . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference"
http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm -
What is the best way to stop a "run-away" request from a JSP? Say the User has a page from which he can issue a request. For example, say that the request performs a database query and returns a list of objects. If the system performance is slow, and the User is tired of waiting for a response, how may the applicaiton be designed to terminate a request to permit the User to issue a new request that is more granular and refined in its scope, and which will presumably run more quickly? Can one place a stop button on the form? Are there any threading issues in terms of the functionality with the stop button to be able to terminate the previous request that is "in-flight" with respect to the middle tier or the host?
Does killing the browser session (which causes the client to lose connectivity to the middle-tier) automatically stop the request?
Does pressing the stop button in the browser have the same effect?We are running the JSP in an IFrame within the browser, and I have noticed that pressing the browser's stop button has no effect on the JSP.
Even if we could get this to work, I am not sure if it will cause the process on the middle-tier to stop consuming resources.
Thanks for your feedback. I guess I am interested in learning about any/all implementation alternitives, with a view to understanding the complexity/cost/and limitations of each implementation alternative. -
We have recently upgraded from SQL server 2008 to SQL server 2012.
We are getting this error when browsing to several pages on our website.
There is insufficient system memory in resource pool 'internal' to run this query
Most of the pages just try to do sql statements or stored procedures. I found a fix related to this error for sql 2012
http://support.microsoft.com/kb/2769594/en-gb
I did install it on server but the problem still remains.
I have increased Maximum server memory to 20 GB to see if it will affect but it didnt.
Memory on server is 32GB
This is the sql version we have
Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64)
Oct 25 2013 19:04:40
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
How can i solve this error?It keeps on appearing when browsing .net websiteThis is the ouptut of memory status
Process/System Counts Value
Available Physical Memory 6559842304
Available Virtual Memory 8741595508736
Available Paging File 17090838528
Working Set 21094821888
Percent of Committed Memory in WS 100
Page Faults 160487165
System physical memory high 1
System physical memory low 0
Process physical memory low 0
Process virtual memory low 0
Memory Manager KB
VM Reserved 51506548
VM Committed 20445040
Locked Pages Allocated 0
Large Pages Allocated 0
Emergency Memory 1024
Emergency Memory In Use 16
Target Committed 20480008
Current Committed 20445040
Pages Allocated 6298528
Pages Reserved 717408
Pages Free 13820616
Pages In Use 5143472
Page Alloc Potential 14312512
NUMA Growth Phase 0
Last OOM Factor 1
Last OS Error 0
Memory node Id = 0 KB
VM Reserved 51504948
VM Committed 10218952
Locked Pages Allocated 0
Pages Allocated 1651360
Pages Free 8323696
Target Committed 10239992
Current Committed 10218952
Foreign Committed 96
Away Committed 0
Taken Away Committed 0
Memory node Id = 1 KB
VM Reserved 1536
VM Committed 10226068
Locked Pages Allocated 0
Pages Allocated 4647208
Pages Free 5496896
Target Committed 10239992
Current Committed 10226072
Foreign Committed 0
Away Committed 0
Taken Away Committed 0
Memory node Id = 64 KB
VM Reserved 0
VM Committed 20
Locked Pages Allocated 0
MEMORYCLERK_SQLGENERAL (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 19136
MEMORYCLERK_SQLGENERAL (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 144
MEMORYCLERK_SQLGENERAL (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 19280
MEMORYCLERK_SQLBUFFERPOOL (node 0) KB
VM Reserved 841608
VM Committed 151560
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 1081360
MEMORYCLERK_SQLBUFFERPOOL (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 1119416
MEMORYCLERK_SQLBUFFERPOOL (Total) KB
VM Reserved 841608
VM Committed 151560
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 2200776
MEMORYCLERK_SQLQUERYEXEC (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 5768
MEMORYCLERK_SQLQUERYEXEC (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 9624
MEMORYCLERK_SQLQUERYEXEC (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 15392
MEMORYCLERK_SQLOPTIMIZER (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 2480
MEMORYCLERK_SQLUTILITIES (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 112
MEMORYCLERK_SQLUTILITIES (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
MEMORYCLERK_SQLUTILITIES (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 128
MEMORYCLERK_SQLSTORENG (node 0) KB
VM Reserved 4800
VM Committed 4800
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 7928
MEMORYCLERK_SQLSTORENG (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 5856
MEMORYCLERK_SQLSTORENG (Total) KB
VM Reserved 4800
VM Committed 4800
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 13784
MEMORYCLERK_SQLCONNECTIONPOOL (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 1184
MEMORYCLERK_SQLCONNECTIONPOOL (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 536
MEMORYCLERK_SQLCONNECTIONPOOL (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 1720
MEMORYCLERK_SQLCLR (node 0) KB
VM Reserved 9450752
VM Committed 10664
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 60648
MEMORYCLERK_SQLSERVICEBROKER (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 528
MEMORYCLERK_SQLHTTP (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
MEMORYCLERK_SNI (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 40
MEMORYCLERK_SNI (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 56
MEMORYCLERK_SNI (node 64) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
MEMORYCLERK_SNI (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 112
MEMORYCLERK_FULLTEXT (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 297936
MEMORYCLERK_FULLTEXT (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 3406024
MEMORYCLERK_FULLTEXT (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 3703960
MEMORYCLERK_SQLXP (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
MEMORYCLERK_BHF (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 152
MEMORYCLERK_BHF (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 184
MEMORYCLERK_BHF (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 336
MEMORYCLERK_SQLQERESERVATIONS (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 841952
MEMORYCLERK_XE_BUFFER (node 0) KB
VM Reserved 3072
VM Committed 3072
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 0
MEMORYCLERK_XE_BUFFER (node 1) KB
VM Reserved 1536
VM Committed 1536
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 0
MEMORYCLERK_XE_BUFFER (Total) KB
VM Reserved 4608
VM Committed 4608
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 0
MEMORYCLERK_XTP (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
MEMORYCLERK_HOST (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 40
MEMORYCLERK_SOSNODE (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 34168
MEMORYCLERK_SOSNODE (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 11664
MEMORYCLERK_SOSNODE (node 64) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 2600
MEMORYCLERK_SOSNODE (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 48432
MEMORYCLERK_SOSOS (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 192
MEMORYCLERK_SOSMEMMANAGER (node 0) KB
VM Reserved 85560
VM Committed 85416
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 0
MEMORYCLERK_FULLTEXT_SHMEM (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 576
SM Committed 576
Pages Allocated 0
MEMORYCLERK_SQLSERVICEBROKERTRANSPORT (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 200
MEMORYCLERK_FILETABLE (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
MEMORYCLERK_XE (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 3440
MEMORYCLERK_SQLLOGPOOL (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 4208
MEMORYCLERK_LWC (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 192
MEMORYCLERK_FSCHUNKER (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 48
CACHESTORE_OBJCP (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 5848
CACHESTORE_SQLCP (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 29664
CACHESTORE_PHDR (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 4616
CACHESTORE_XPROC (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 32
CACHESTORE_TEMPTABLES (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
CACHESTORE_NOTIF (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
CACHESTORE_VIEWDEFINITIONS (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
CACHESTORE_XMLDBTYPE (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_XMLDBELEMENT (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_XMLDBATTRIBUTE (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_STACKFRAMES (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_STACKFRAMES (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_STACKFRAMES (node 64) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_STACKFRAMES (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 24
CACHESTORE_BROKERTBLACS (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 48
CACHESTORE_BROKERKEK (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_BROKERDSH (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_BROKERUSERCERTLOOKUP (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_BROKERRSB (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_BROKERREADONLY (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 32
CACHESTORE_BROKERTO (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
CACHESTORE_EVENTS (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
CACHESTORE_SEHOBTCOLUMNATTRIBUTE (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 400
CACHESTORE_SYSTEMROWSET (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 1056
CACHESTORE_SYSTEMROWSET (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 480
CACHESTORE_SYSTEMROWSET (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 1536
CACHESTORE_CONVPRI (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 32
CACHESTORE_CONVPRI (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
CACHESTORE_CONVPRI (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 48
CACHESTORE_FULLTEXTSTOPLIST (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 56
CACHESTORE_SEARCHPROPERTYLIST (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
CACHESTORE_COLUMNSTOREOBJECTPOOL (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 192
CACHESTORE_XML_SELECTIVE_DG (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
USERSTORE_SCHEMAMGR (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8896
USERSTORE_DBMETADATA (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 5088
USERSTORE_DBMETADATA (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 4768
USERSTORE_DBMETADATA (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 9856
USERSTORE_TOKENPERM (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8104
USERSTORE_TOKENPERM (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 448
USERSTORE_TOKENPERM (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8552
USERSTORE_OBJPERM (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 1640
USERSTORE_OBJPERM (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 600
USERSTORE_OBJPERM (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 2240
USERSTORE_SXC (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 160
USERSTORE_SXC (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 168
USERSTORE_SXC (node 64) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 8
USERSTORE_SXC (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 336
OBJECTSTORE_LBSS (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 368
OBJECTSTORE_LBSS (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 296
OBJECTSTORE_LBSS (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 664
OBJECTSTORE_SNI_PACKET (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 616
OBJECTSTORE_SNI_PACKET (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 648
OBJECTSTORE_SNI_PACKET (node 64) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 56
OBJECTSTORE_SNI_PACKET (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 1320
OBJECTSTORE_SERVICE_BROKER (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 496
OBJECTSTORE_LOCK_MANAGER (node 0) KB
VM Reserved 65540
VM Committed 65540
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 11816
OBJECTSTORE_LOCK_MANAGER (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 11632
OBJECTSTORE_LOCK_MANAGER (node 64) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 24
OBJECTSTORE_LOCK_MANAGER (Total) KB
VM Reserved 65540
VM Committed 65540
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 23472
OBJECTSTORE_SECAUDIT_EVENT_BUFFER (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
OBJECTSTORE_XACT_CACHE (node 0) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 2224
OBJECTSTORE_XACT_CACHE (node 1) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 2488
OBJECTSTORE_XACT_CACHE (node 64) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 16
OBJECTSTORE_XACT_CACHE (Total) KB
VM Reserved 0
VM Committed 0
Locked Pages Allocated 0
SM Reserved 0
SM Committed 0
Pages Allocated 4728
Buffer Pool Value
Database 274830
Simulated 0
Target 4096000
Dirty 507
In IO 0
Latched 1
Page Life Expectancy 11941
Procedure Cache Value
TotalProcs 333
TotalPages 5914
InUsePages 345
Global Memory Objects Pages
Resource 401
Locks 2934
XDES 561
DirtyPageTracking 24
SETLS 24
SubpDesc Allocators 165
SE SchemaManager 559
SE Column Metadata Cache 549
SE Column Metadata Cache Store 3
SQLCache 270
Replication 2
ServerGlobal 52
XP Global 2
SortTables 3
Query Memory Objects (internal) Value
Grants 2
Waiting 0
Available 1677087
Current Max 1814852
Future Max 1814852
Physical Max 1854482
Next Request 0
Waiting For 0
Cost 0
Timeout 0
Wait Time 0
Small Query Memory Objects (internal) Value
Grants 0
Waiting 0
Available 95518
Current Max 95518
Future Max 95518
Remote Query Memory Objects (internal) Value
Grants 0
Waiting 0
Available 926250
Current Max 926250
Optimization Queue (internal) Value
Overall Memory 17039360000
Target Memory 16709148672
Last Notification 1
Timeout 6
Early Termination Factor 5
Small Gateway (internal) Value
Configured Units 96
Available Units 95
Acquires 1
Waiters 0
Threshold Factor 380000
Threshold 380000
Medium Gateway (internal) Value
Configured Units 24
Available Units 24
Acquires 0
Waiters 0
Threshold Factor 12
Threshold 1392429056
Big Gateway (internal) Value
Configured Units 1
Available Units 1
Acquires 0
Waiters 0
Threshold Factor 8
Threshold -1
Memory Pool Manager Pages
Reserved Current 0
Reserved Limit 2095263
Memory Pool (internal) Pages
Allocations 464738
Predicted 929941
Private Target 0
Private Limit 0
Total Target 2560001
Total Limit 2560001
OOM Count 0
MEMORYBROKER_FOR_CACHE (internal) Pages
Allocations 14370
Rate 1582
Target Allocations 1646012
Future Allocations 0
Overall 2080000
Last Notification 1
MEMORYBROKER_FOR_STEAL (internal) Pages
Allocations 409631
Rate -242825
Target Allocations 2039691
Future Allocations 0
Overall 2080000
Last Notification 1
MEMORYBROKER_FOR_RESERVE (internal) Pages
Allocations 0
Rate -59129
Target Allocations 2080000
Future Allocations 463125
Overall 2080000
Last Notification 1
MEMORYBROKER_FOR_COMMITTED (internal) Pages
Allocations 40735
Rate 1
Target Allocations 1670796
Future Allocations 0
Overall 2080000
Last Notification 1
MEMORYBROKER_FOR_XTP (internal) Pages
Allocations 2
Rate 0
Target Allocations 1630062
Future Allocations 0
Overall 2080000
Last Notification 1
Memory Broker Clerk (Buffer Pool) Pages
Total 274830
Simulated 0
Simulation Benefit 0
Internal Benefit 0
External Benefit 0
Value Of Memory 0
Periodic Freed 0
Internal Freed 0
Mainly we have SQL and IIS on server -
Error while running a query-Input for variable 'Posting Period is invalid
Hi All,
NOTE: This error is only cropping up when I input 12 in the posting period variable selection. If I put in any other value from 1-11 I am not getting any errors. Any ideas why this might be happening?
I am getting the following error when I try and run a query - "Input for variable 'Posting Period (Single entry, mandatory)' is invalid" - On further clicking on this error the message displayed is as follows -
Diagnosis
Variable Posting Period (Single Value Entry, Mandatory) is used as a lower limit (X) and an upper limit () in an interval selection. This limit has the value #.
System Response
Procedure
Enter a different value for variable Posting Period (Single Value Entry, Mandatory). If the value of the other limit is determined by another variable, you can change its value also.
Procedure for System AdministrationOK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
-> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
-> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
-> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM -
'Structure Changed' Error when running a query
Hi,
I created a query with 2 structures. One structure for the time periods and one with Key figures (Calc and Restricted).
The query ran fine and subsequently I put this into a workbook which had other queries and made a workbook type report.
I modified the structure with the key figures recently and when I run the query now a popup box appears saying "warning; structure changed" and lists down the query elements that I changed, and subsequently the query does not run (no data is displayed).
But if I open the same query in design mode and do nothing and run the query again (with the same input parameters), it runs ok.
Please advise on how I can sort this out.
Any help would be greatly appreciated.
Thanks,
DominicHi,
If you want, you can remove the query with 'Remove Query' option in the BEx toolbar and then re-insert the query and then save the changes to the workbook. The next time, you refresh the workbook you won't get any such messages.
Thanks -
Problem while running a query on multiprovider
Dear all,
I have created a query to generate the balance sheet in FIGL using standard virtual cube 0FILGL_V01 and a custom transactional cube which gets plan data through BPS. The custom plan cube is an exact copy of the 0FIGL_V01 (plan value is populated in 0val_flow KF). These two cubes are conncected using a multiprovider. In the identification tab in the mutliprovider definition I have selected both the data targets for all characteristics.
Now when I create a query for balance sheet using GL account no and plan and actual value of cumulative balance KF I get the following error.
Error 'Field symbol has not yet been assigned.' in RSDRC_CUBE_DATA_GET_RFC could not be caught.
When i run the query in the RSRT transaction it shows 'Some Key figure have exception aggregation.'
I'll be very grateful if somebody could explain how to about removing this error. Thanks a lot.
Regards,
SumitHi Sumit,
Try this OSS note:905083
Import Support Package 16 for 3.5 (BW 3. 50 Patch 16 or SAPKW35016) into your BW system. The Support Package is available once Note 0872275 "SAPBWNews BW Support Package 16 NetWeaver'04 Stack 16", which describes this Support Package in more detail, has been released for customers.
Before you implement the correction, you must carry out the following actions:
1. Use Transaction SE37 to create the RSDRC_RAISE_EXCEPTION function module in the RSDRC function group (Short text = Terminator 2). This function does not have any parameters.
2. In the RSDRC_CUBE_DATA_GET_RFC function module, under 'Tables', add the new entry E_T_MESG of the TSMESG type and this new entry is optional.
3. The T100 messages DBMAN 003,004 and 005 complete the correction:
a) 003: Unknown error in part cube RSDRC_CUBE_DATA_GET_RFC = &1
b) 004: Non-catchable error '&1' in RSDRC_CUBE_DATA_GET_RFC.
c) 005: The following error occurred in RSDRC_CUBE_DATA_GET_RFC for part cube = &1.
In urgent cases you can implement the correction instructions.
To make information available in advance, the notes mentioned may already be available before the Support Packages are released. However, in this case the short text still contains the words "preliminary version".
Hope this helps.
Assign points if useful
Venkat -
Problem while running a query on a multiprovider
Dear all,
I have created a query to generate the balance sheet in FIGL using standard virtual cube 0FILGL_V01 and a custom transactional cube which gets plan data through BPS. The custom plan cube is an exact copy of the 0FIGL_V01 (plan value is populated in 0val_flow KF). These two cubes are conncected using a multiprovider. In the identification tab in the mutliprovider definition I have selected both the data targets for all characteristics.
Now when I create a query for balance sheet using GL account no and plan and actual value of cumulative balance KF I get the following error.
Error 'Field symbol has not yet been assigned.' in RSDRC_CUBE_DATA_GET_RFC could not be caught.
When i run the query in the RSRT transaction it shows 'Some Key figure have exception aggregation.'
I'll be very grateful if somebody could explain how to about removing this error. Thanks a lot.
Regards,
SumitHi Sumit,
Try this OSS note:905083
Import Support Package 16 for 3.5 (BW 3. 50 Patch 16 or SAPKW35016) into your BW system. The Support Package is available once Note 0872275 "SAPBWNews BW Support Package 16 NetWeaver'04 Stack 16", which describes this Support Package in more detail, has been released for customers.
Before you implement the correction, you must carry out the following actions:
1. Use Transaction SE37 to create the RSDRC_RAISE_EXCEPTION function module in the RSDRC function group (Short text = Terminator 2). This function does not have any parameters.
2. In the RSDRC_CUBE_DATA_GET_RFC function module, under 'Tables', add the new entry E_T_MESG of the TSMESG type and this new entry is optional.
3. The T100 messages DBMAN 003,004 and 005 complete the correction:
a) 003: Unknown error in part cube RSDRC_CUBE_DATA_GET_RFC = &1
b) 004: Non-catchable error '&1' in RSDRC_CUBE_DATA_GET_RFC.
c) 005: The following error occurred in RSDRC_CUBE_DATA_GET_RFC for part cube = &1.
In urgent cases you can implement the correction instructions.
To make information available in advance, the notes mentioned may already be available before the Support Packages are released. However, in this case the short text still contains the words "preliminary version".
Hope this helps.
Assign points if useful
Venkat -
'ORA-01722: Invalid Number' error while Running a Query
Hi,
I'm trying to run a query built on a DSO. The DSO has a field 'Start Date'. This Start Date InfoObject has a reference Char as 0DATE.
This Start Field has blank values due to which I'm getting the ORA-01722 error. I came across many threads with same topic of discussion. As mentioned in one of the Threads I have written a program to update 'Start Date' with 00000000. The code wriiten is "UPDATE /BIC/AZ_MONINV00 SET /BIC/ZSTR_DTE = '00000000' where /BIC/ZSTR_DTE = ' '.
Now when I see the data in the active data table of DSO the blank value is replaced with '00000000'.
But If I right click on the DSO click on display data the 'Start Date' field is blank. And now the Query also gets executed without any error. But in the output of the query the 'Start Date' Field has "#" values.
Can anyone suggest on how can I make these "#" values appear as 00000000 in the report?In this case, you have to write a macro to avoid # in Analyzer.
Right Click-->Display Data will show data from Active table of DSO only.
If you don't want to show any blank date values in the report, you can exclude in Filter in Query. -
Error while running a Query on webi
Hi Folks
I just installed a BOBJ edge standard 3.1 and trying to configure and test it the very first time, I have following issues if you can advise the solution., I would really appreciate.
1. when i try to create a test query on Webi Rich Client and and run query, I get the follow messge:
A databse error occured. The database error text is : [Microsoft] [ODBC Microsoft access driver] could not use (unknown);
file already in use (WIS 10901)
2. The other issue I have is that when i create a test query on the webi (infoview side) and try to run the query I dont see any result like column, rown or fields, all I see is a solid yellow block which I believe is because of kmissing Java connector. can you guys pls let me know if this is the reason I dont see the report or Is there any other reason for that.
I would appreciate your help on this.
RegardsHello,
What type of database did you build your universe on? Access? SQL Server? or other? You would need to go into the universe you are trying to use for the report go into File, Parameters, and see what your connection is, and while you're there, click "test" to be sure it is working. If not, that is your problem. If it is, but the report still is not working, either way, you will need to go into Control Panel, Administrative Tools, Data Sources (ODBC) and set up a system DSN that links to the correct database. Again test it to be sure it works. Then make sure the universe has a connection that uses this same DSN. The report should run.
Hope that helps. -
Run a query on linked tables to create a new datasource
Using Crystal XI
I have a report that draws from two data sources. They can't be joined at the server side, but they are linked in Crystal Database Expert.
I can't figure out if Crystal gives me a way to write an SQL Query to run an aggregate function referencing both tables. The results of this query would be the datasource for a graph in the report. I'm wondering if Crystal gives me a way, maybe through subreports, to write the query I need.
More concretely:
And I want to include in my datasource alarmId, Hour and the Maximum amount of calls received in any one hour for any one station (this maximum is to provide scale for a graph)
In one table nameed AlarmStartTimes I have data like
Alarms
AlarmID Hour Recipient
Alarm1 8 Joe
Alarm23 10 Mark
Alarm60 7 Joe
Alarm95 8 Linda
In another I have data like
EELocation
Recipient Location
Joe Station1
Mark Station2
Linda Station1
So if I could just join my talbes at the server side I'd use a query like:
select *, max(select count(AlarmID) from Alarms, EELocation from Alarms Join EELocationo on Alarms.Recipient=EELocation.Recipient group by Hour, Location) AS from Alarms
Anyway, that's probably got a syntax error or 4 in it, but you get the idea.
I can't group on the database side. Since Crystal is able to link the two tables and successfully group them out by Location, it seems like there should be some way for me to run a query against the tables reflecting that existing link, but I can't see how to do it.
The reason I can't link on database side is that the data is in two databases, and it's not known what the location of the databases is at report-writing time. The location of the databases gets set via the Crystal API when the report is launched from an application.Since you have 2 datasource in the report you are limited on what you can use in crystal, such as crystal will not allow you to use sql expressions.
-
How to know that a form is running in query-only mode
I have a form that can run in query-only mode or non-query-only mode depending on the current user who logs in, and I want to change its apprearance dynamically when it's in different modes (for example, enable or disable buttons). Is there a built-in or system variable from which I know that the form is running in query-only mode or not?
Thanks,
ShuThe global variable solution is what we are using now. I thought there are some unpublished built-in or system variables. In my application, there is a public "menu" form from where hundreds of forms are CALLed with some in query-only mode and some in non-query-only mode depending on the current user role. :PARAMETER.QUERY_ONLY will always be 'NO' because the "menu" form is started in non-query-only mode. But it's good to know about it.
Thank you very much for your replies,
Shu -
I'm trying to run a query in a JTextField and then have that query display the output in a JTable. When I try to use .getText() to store the query in a string I keep getting errors about SQLException. Can anyone lend me in hand in telling me what I'm doing wrong?
This is the error I get when the line below would say:
query=jtf.getText();
c:\java>java myguidemo
Exception in thread "main" java.sql.SQLException: Invalid SQL type
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java
:208)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:67)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:946)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStateme
nt.java:1169)
at oracle.jdbc.driver.OracleStatement.doScrollExecuteCommon(OracleStatem
ent.java:4044)
at oracle.jdbc.driver.OracleStatement.doScrollStmtExecuteQuery(OracleSta
tement.java:4196)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:
1280)
at myguidemo.<init>(myguidemo.java:39)
at myguidemo.main(myguidemo.java:106)
c:\java>
Here is what I have so far. I took out the oracle IP and login. This is a working version, but where query = "SELECT * ....." I would like that to get whatever is typed in the JTextField. Also button1-5 is supposed to display the entire table in the JTable just by clicking it. Right now I just have them to change background color to make sure they worked.
import javax.swing.*;
import javax.swing.table.*;
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
public class myguidemo extends JFrame implements ActionListener{
Connection connection;
Statement stmt;
String query;
ResultSet results;
ResultSetMetaData md;
int numrows, numcols;
AbstractTableModel dataModel;
Object [][] data;
JTextField jtf;
JTable jtb;
JPanel jp;
JScrollPane jsp;
JButton button1, button2, button3, button4, button5;
public myguidemo() throws Exception{
Class.forName( "oracle.jdbc.driver.OracleDriver" );
connection = DriverManager.getConnection("jdbc:oracle:thin:@);
jp = new JPanel();
add(jp,BorderLayout.SOUTH);
jtb = new JTable();
add(jtb,BorderLayout.CENTER);
jtf = new JTextField();
add(jtf,BorderLayout.NORTH);
query = "SELECT * FROM PATIENT";
stmt = connection.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_READ_ONLY);
results = stmt.executeQuery(query);
md = results.getMetaData();
numcols = md.getColumnCount();
numrows = 0;
while(results.next()) numrows++;
results.beforeFirst();
data = new Object[numrows][numcols];
results.next();
for(int i=0; i<numrows; i++){
for(int j=1; j<=numcols; j++){
data[i][j-1] = results.getString(j);
results.next();
dataModel = new AbstractTableModel(){
public int getColumnCount() {return numcols;}
public int getRowCount() {return numrows;}
public Object getValueAt(int row, int col) {return data[row][col];}
jtf.addActionListener(this);
jtb = new JTable(dataModel);
jsp = new JScrollPane(jtb);
add(jsp);
button1 = new JButton("Doctor");
button2 = new JButton("Medication");
button3 = new JButton("Patient");
button4 = new JButton("Prescription");
button5 = new JButton("Supplier");
jp.add(button1);
jp.add(button2);
jp.add(button3);
jp.add(button4);
jp.add(button5);
button1.addActionListener(this);
button2.addActionListener(this);
button3.addActionListener(this);
button4.addActionListener(this);
button5.addActionListener(this);
setTitle("CSIT");
setSize(1280,720);
setDefaultCloseOperation(EXIT_ON_CLOSE);
setVisible(true);
public void actionPerformed(ActionEvent e){
if (e.getSource() == jtf){
jtf.setText("");
if (e.getSource() == button1) jtb.setBackground(Color.RED);
if (e.getSource() == button2) jtb.setBackground(Color.GREEN);
if (e.getSource() == button3) jtb.setBackground(Color.BLUE);
if (e.getSource() == button4) jtb.setBackground(Color.ORANGE);
if (e.getSource() == button5) jtb.setBackground(Color.YELLOW);
public static void main(String args[]) throws Exception{
new myguidemo();
Edited by: rizzo18 on Dec 12, 2009 1:46 PM
Edited by: rizzo18 on Dec 12, 2009 2:06 PMI'm trying to run a query in a JTextField and then have that query display the output in a JTable.1. Write classes that only do JDBC. If there is any GUI code at all in them then it is wrong.
2. Test those classes and modify until they work.
3. Use those classes in your GUI code (other classes) to do what you want.
Questions about 1 and 2 go in this forum. Questions about 3 go into a GUI forum.
Use code tags when you post code. -
Error in Running a query on ABAP web portal
Hi Guys,
We are working in a environment where BIW is installed with only WEB AS ABAP. We do not have enterprise portal in our landscape. so we need to run our reports on
url http:
host:8000\sap\bw\Bex? Query=........
But when we run a query fro Query designer it is taking the following path in internet explorer.
/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0FIAP_M30_Q0002&VARIABLE_SCREEN=X&DUMMY=1
So can someone help me to set the properties so that the query can run on path http:
host:8000\sap\bw\Bex?.....
regards,
saurabhHi Saurabh,
In SMICM transaction code we have to maintain the parameters in order to run the web report in the specified format.
i am listing some parameters in the below, Please have a look and see whether it can help u out .....
Services
icm/server_port_0 = PROT=HTTP,PORT=8000
icm/server_port_1 = PROT=SMTP,PORT=0
HTTP settings
icm/HTTP/max_request_size_KB = 102400
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50000
icm/HTTP/server_cache_0 = PREFIX=/, CACHEDIR=/usr/sap/BSD/DVEBMGS00/dat
a/cache
Misc
icm/host_name_full = cauvery.com
icm/cancel_strategy = cancel requests without session (stateless)
rdisp/plugin_auto_logout = 1800
is/HTTP/virt_host_0 = :;
is/SMTP/virt_host_0 = :;
Once after maintain the parameters go and check in the SICF transaction code SAPBW---BEx + right click + test service. And check whether it is opening in the required URL path.
Regards,
Vara Prasad. -
Can we run a query with variable screen at start up in Bex Analyzer
Hello all,
I have a query which asks for fiscal year and posting period at the start of query run. But when I run the query in analyzer, it gives me this error all the time.
"Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in Program CL_RSR_REQUEST and form TEXT_ELEMENTS_GET: VARIABLE"
Can someone help,
Thanks in advance.Hello,
Please check if OSS note 858458 is applicable in your case.
Regards,
Praveen
Maybe you are looking for
-
Sites want me to download newest version of Adobe Flash Player when I already have it
I am having difficulty when at a site that I want to watch a video on (most recently a work site) and I am told I need to update Adobe Flash Player. I double check andI Have the same version I am being insructed to download. I tried going to Security
-
Is it possible to open a pro tools project in logic?
Or vise versa?, What can or cannot be done to communticate between these two apps? In olden days, Apple bent over backwards to be compatible with windows apps. Have they done this with logic or are we on our own as far as working with the pro tools b
-
Windows 8 - Move Elements to New PC - Does Not Download - Download Assistant Does Not Pop Up
I just switch to an Asus N550 which runs Windows 8. I have no need to subscribe to creative cloud at this time as I feel that I have still a few months/years of joy to get out of my Elements 11 purchase from last year. I also have Premiere 10 which I
-
HT1551 None of my apps on APPLE TV are working
I just got an Apple TV, and when ever i try to get into anything, music, netflix, hulu plus, it will say acessing and then the light will blink 3 times, and boot me out to the main menu. Does anyone know why this is happening? Did i set it up wrong o
-
Sshd authentication via pam_userdb
Hello I would like to configure ssh to authenticate against a database file which I've created. This is what I have done so far: 1. Generate the database file out of a text file: db_load -T -t hash -f logins.txt /etc/vpasswd.db I have modified /etc/p