ETA date in Nomination monitor is missing.
Hi Gurus,
Ive maintained an ETA - date on nomination but when i see the log of my xml .. value of ETA date is 00000000..
can somebody help me, why system generate the 0 value..
Download the shareware utility Pacifist from www.macupdate.com or www.versiontracker.com. Use it to extract a fresh copy from the file archives on your OS X Installer Disc. The archives are in the /System/Installation/ folder.
Similar Messages
-
The boot configuration data for your Pc is missing or contains errors: error code 0x000014c
Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Apple recently replaced my broken iPhone 5 with a new one. I backed up the contents of my phone with iCloud.
When setting up my new phone I used an iCloud back up from an earlier date. Now I am missing some of my most recent stuff. How
Do I go back to use the proper iCloud back up to set up my new phone?Tap settings> general> reset> erase all content and settings...then you'll have a chance to setuo your phone again
-
Control data for storage type is missing Message no. L3006
Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason -
"control data for storage type is missing"
Hi Guys
I am trying to create a goods receipt for an inbound delivery.
I created the inbound delivery VL31N - sucessfully
But when trying to create a putaway LT0F - error
control data for storage type is missing. msg no. L3006
Do i maiantain this control data for storage type in the Material master?
is there anything Im doing wrong?
Can someone help please.
Thanks in advance for the help.
Ahmad YahyaHi,
Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
Regards,
Prabu -
Date and time keeps going missing!
Hi everybody, my date and time keeps going missing from the top bar every time I turn on my mac - sometimes other things go missing, like the airport status.
It used to happen just once a fortnight but after I installed the latest security update, it seems to be happening every time. Does anybody have a reason/fix? Would be much appreciated. Thankyou!Hi appleoclock, and a warm welcome to the forums!
Not sure this works since that Qursical update, but the cure for that used to be...
Apple Menu Bar Icons Gone
You've probably got a couple of corrupt preference files.
In "/Users/<yourname>/Library/Preferences", delete com.apple.systemuiserver.plist
In "/Users/<yourname>/Library/Preferences/ByHost", delete com.apple.systemuiserver.xxx.plist where 'xxx' is a 12 digit (hexadecimal) numeric string.
This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them). -
Organizational data for inter-company billing missing in plant 2200
Organizational data for inter-company billing missing in plant 2200
Dear Siva,
This may be related to incompleteness in the inter -company billing configuration settings so go through this IMG path then do the proper settings,
SPRO>Sales and distribution>Billing>Inter company billing>Assign organisational units by plant, here you need to assign the Sales organisation,Distributional channel and Division (sales area) to the 2200 plant.
Now you try
I hope it will help you
Regards,
Murali. -
Hi there,
I am trying to:
1) Monitor a Solaris 10 operating system by sending snmp data to a monitoring program
2) Monitor M4000 / SB6000 / T4-1B devices by sending snmp data to a monitoring program
Is there any documentation to say what SUN/Oracle is sending by default?
Is there any way to modify what is sent via snmp, like changing&replacing the MIB on the M4000 / SB6000 / T4-1B?
Where is the equivalent of the MIB located on the Solaris 10 OS? Can this be updated / replaced to add additional checks?
One of the things that I don't see on my monitor, is the heat sensors that one can see when logging onto the M4000 / SB6000 / T4-1B.
I would really like to create thresholds for this after a recent event where the temperature in the Data Center was not properly monitored.
Any help would be greatly appreciated.
TIAIf you are not using Wi-Fi, it will count as cellular data, but only minimal.
-
Data Guard Gap Monitoring script
Hello,
Can anyone please provide me data guard gap monitoring script for databases(primary,standby) on RAC.
Oracle RDBMS 11.2.0.2(4-node RAC) on RHEL 5.6.
Thanks
Edited by: 951368 on Dec 26, 2012 9:21 AM951368 wrote:
Hello,
Can anyone please provide me data guard gap monitoring script for databases(primary,standby) on RAC.
Oracle RDBMS 11.2.0.2(4-node RAC) on RHEL 5.6.
Thanks
Edited by: 951368 on Dec 26, 2012 9:21 AMUse the script of MSeberg, Modify v$instance as gv$instance for RAC -
CODE CHANGE and DATA CHANGE while monitoring
Hi,
I have a scenario where I got one system error with restart possible.
The failure happened because of wrong data or code.
I want to know, whether we can change the data/code while monitoring and get it reflect while the next re-start of the same message.
Thanks & Regards
Katta Mohan Reddy
Message was edited by: Katta Mohan ReddyHi Katta,
the only way (within the standard)
is I believe using the test tool (component monitoring) to send the message directly to Integration Engine
but... this does not always work (at least in my case)
you should try to validate the message before sending it or develop a way to resend it from the <b>sender system</b> with changed data - this is the best practice but I agree that tool for changing the data in XI would be very helpful
Regards,
Michal -
How to data load without monitor entry?
Hello,
the atttibuts of a character are filled daily. There is no Request.
Does anyone know, how I can find out from where the Data comes without monitor entrys?
Thank you!
SWHi
You can check whether any customised ABAP coding is used to fetch data from some data source and fill the related master data
RSRD_ATTR_DEP - dependencies of attributes.....
Like this, there can be some link tables which could be used in custom ABAP code to automatically fill the attribute values
Bye
N Ganesh
assign points if useful** -
Missing Server and Datas in Workload Monitoring - ST03
Hi,
I tried to monitor workload using tcode ST03. But I am unable to see the server and datas for the same.
Can anyone help me how to configure or assign server in ST03.
thanks and regards
Jaya GaneshHi Mike,
Thanks for the reply.
I have checked the BG job SAP_COLLECTOR_FOR_PERFMONITOR. its working fine in a hourly basis. and checked the reports concerned to the job. everything is fine.
The problem is I am not able to see the server or instances in workload list. How do I assign it or add it.
Help needed in this regard
thanks and regard
Jaya Ganesh -
Missing data in server monitor under linux and solaris
Some metrics are not displayed in our environments, specifically under the statistics tab, request statistics, active coldfusion thread, we always have a zero line. Also under memory usage, "cf threads by memory usage" is always empty. I have all three buttons at the top checked so they are monitoring. Is there something else I'm doing wrong?
Environment 1 : dell2850->centos5->vmware->centos5->32bitJDK5->tomcat6->coldfusion8
Environment 2 : sun5120->solaris10->64bitJDK5->tomcat6->coldfusion8
I'm specifically wanting thread info to check if I should increase the defaults in CFIDE configuration. Most everything on the server is being delivered faster now that we are using a 64bit JVM and have moved to solaris in production (from windows). But there are some sections of our cfm logic that are taking much longer now (2000% longer)
Thanks
AhnjoanHi all,
does anyone can write some info why java Threads are
recorded in the list of process (ps -ef) when you run
on a Linux box, but not the same when you run on
Solaris ? Which Thread support is more
performant/stable that on Linux or that on Solaris?
Thanks
FrancescoLinux treats kernell threads as light weight processes and displays them as if they are actual processes - they of course are not, so the results of 'ps' can be misleading. Solaris fully differentiates between its three concepts of threads, lightweight processes and processes and 'ps' only shows actual processes.
Both implementations in Linux and Solaris perform well.
By the way, Solaris 8 has an optional, slightly different thread model than earlier versions of Solaris (in fact it is more like NT's) and that can be more efficient for JVM's or other multithreaded systems running on SMP systems. It can also be worse - your mileage may vary. -
Web service data source - Entry 70 still missing
Hello,
I have created a web service data source in order to create a push mechanism for master data.
Before implementing and consuming it in R/3 side, I have tested the generated function module of the data source.
I have created a real time (and push) info package, assigned it to a daemon and executed the FM.
After executing the FM, my request remains in yellow and I get the message:
"...... Entry 70 still missing " .
In the Status tab I get the message "No Idocs arrived from the source system."
Kindly help, Regards.
Amir,Thanks for the response.
1. In the infopackage I have set the automatic closure to 1 hour
2. Data is not getting loaded to the datatarget
3. When we click on assign on infopackage it gives an error ' No profile selected for web service'. When we ignore this and go to the Monitor: Real time data acquistion screen adn try to add the DTP it fails.We are not able to include the DTP in the deamon. It fails with ' Operation CHECK_STATUS_OF could not be carried out for REALTIME_DTP '
Any help in this regard will be greatly appreciated.
Thanks
Suja -
Server Monitor Buttons Missing
The Monitoring, Profiling and Memory Tracking buttons are all missing from the Server Monitor and it is not displaying any data. Where did they go? I'm on CF9/Multi-server and Windows Server 2008/64 bit. My CF server instances are running under a domain account so they can get to network shares. I'm using multiple jvm.config files to give some servers more memory than others. I've tried adding the domain account to the Administrators group, made sure monitoring, profiling and memory tracking are all enabled, and made sure the crossdomain.xml file is in the webroot.
Well, first briefly, I've seen this happen (the start/stop buttons don't appear), where simply refreshing the page made them reappear.
Assuming you've confirmed that doesn't solve it, here are some questions that may help us hone in on the problem:
- does this happen on all the instances or just one?
- you say you are on CF9. Do you mean 9 or 9.0.1?
- Have you applied any hotfixes or cumulative hotfixes? (And I'd ask you to confirm that not from memory but from confirming by looking in the lib\updates directory. On Multiserver, that's \servers\cfusion\cfusion-ear\cfusion-war\WEB-INF\cfusion\lib\updates for the cfusion instance, or \servers\instancename\cfusion.ear\cfusion.war\WEB-INF\cfusion\lib\updates for any others (note change from - to . in the ear/war directory names).
- Are the hotfixes there the right ones for the version you're running (not 900 in the filenames if you're running 9.01, or vice-versa)
- When you say it's "not displaying any data", do you mean that the graphs on the front page are essentially blank? That would mean simply that "start monitoring" has not yet been enabled. When you say "no data", I'd want to make sure you don't mean that none of the screens show anything. There are many that show data even if there are none of the "start" buttons enabled, such as the Template Cache Status page (on the Statistics tab, in the "Request Statistics" section). Is that "displaying data"? Just trying to help clarify your situation.
Also, just as a workaround until you do solve this, note that if you're on 9.01, you can now at least turn the buttons on and off in the CF Admin, something that's gone under the radar for many, it seems.
Hope that's helpful.
/charlie arehart
[email protected]
Providing CF and CFBuilder troubleshooting services
at http://www.carehart.org/consulting
Maybe you are looking for
-
Just got a 27'' AOC monitor that I'm using with my Macbook Air (purchased in 2013). It's working great but as soon as I unplug the power adapter from my laptop the monitor goes black and says 'no signal'. I've been reading online that you need to hav
-
Invoice verification- duty elements not picking up- cancellation
Dear Pandits, I have two issues. In one material PO which has got ED, cess , Scess, Tax. - J1iex is posted, GR is done, J1ieX is captured In MIR7 , the simulation screen shows the total value one is credit and one is for debit ( without showing the d
-
I have 2 iphones using th same itunes account(worked for a years so dont see why I should change this ) now both uprgraded to io 6 one is 4s, the other 4. Since upgraade, If I send a message to hubby on the 4 phone it bounces back to me and says it
-
Energy saver not starting the MM at times, holds the log a clue?
I have a MM as a server, normal OS, that sometimes does not start in the morning. It is set to shut down at 23.00 and does so all evenings at 23.10. However this morning (01-10-2011) it did not come on again and I was looking through the log and fo
-
How to find from the data dict if a user has read access on a directory
How to find "dynamically" if a user has READ access to a directory object. I want to know if there is a data dictionary table that holds if a user/schema has read access to a directory object. I know there is an dba_directories table and an all_direc