Etherchannel and HP teaming software- one, the other or both?
I have servers that I want to bundle the gigabit NIC's together for both load balancing and redundancy. Do I use the HP teaming software to bundle the NIC's, use etherchannel on the 4506 that they are plugged into, or both? What are the advantages to each, and any links or documentation that can be supplied would be appreciated.
Thanks.
Both. On the Cisco switch you would configure the ports to be part of an etherchannel while the NICs themselves need to be teamed using HP teaming software.
Similar Messages
-
Can I take courses at ITunes University that teach how to use the calendar or IPhoto? How? ITunes U seems to want me to teach a course but doesn't list courses I can take.
Same thing happening in Safari 5.0.5 on OSX 10.6.7
-
i used to open many tabs in the same page and i move from one to other by mouse but since3 two days the tabs open in the same page normaly but i can't move from one to other when i clik with mouse on any tab it don't open/ do u have any solve for this
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I have an iPad and an iPhone, both registered to same AppleID. Incoming Face time calls ring randomly on one or the other or both (and sometimes none). They should ring on both.
check the 'recieve at' addresses you set in settings, facetime. you can have multiple addresses.
On mine, i have thre addresses set the same. I am using both a phone # and my e mail address (neither one is my apple ID, by the way).
If somebody calls me to FT using the phone #, the phone rings first, followed by the pad, about 10 sec later. If they call using the e mail address, they both ring at about the same time. If one or the other answers, the other device stops ringing.
So next time a call comes, wait a bit before answering to see if the other device responds. and check your receive at addresses.
You might want to test a little - have somebody call using one address, or the other, and see if you can track the behavior. -
I have 2 different accounts at the same websites. Whenever I go to that website, one of my two user names (always the same one) pre-fills the user-name field and I can't access the other account. The website rightfully rejects my password. I cannot overwrite my pre-filled user-name because the second I hit enter to logon, the original user-name rewrites itself into it's field. Neither of the user names is being saved by firefox anywhere in the "tools"; Options, security, advanced or privacy menu fields.
I did notice that that website has installed a cookie onto my computer called "_rememberme" which contains the user-name that is plaguing me.
This is a website that I access for very sensitive and important information and I must have both accounts accessible at different times.
Thanks, Joshua
XP, sp3; FF3.6.3
== This happened ==
A few times a week
== I added the second account on this website.You need to clear that remember me cookie and make sure that you remove a check mark to remember you on that website.
Tools > Options > Privacy > Cookies: "Show Cookies"
You can disable the automatic fill of a name and password.
See:
http://kb.mozillazine.org/Password_only_filled_after_entering_user_name
http://kb.mozillazine.org/signon.autofillForms
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page. -
hi guys i added a new mail account and now she i click new mail i can see 4 accounts, the first is right below the subject, and it' the old one and the new one, the other one is on its right and it's the old one and the new one. is it normal? Thanks.
sorry, correction,
hi guys i added a new mail account and now if i click new message on the mail field i can see 4 accounts, the first is right below the subject, and it' the old one and the new one, the other one is on its right and it's the old one and the new one. is it normal? Thanks. -
Pages: How can I sort one column of words and not have it affect the other columns?
How can I sort one column of words and not have it affect the other columns? I have opened the inspector to the edit columns and rows under Table. It will sort the column, but then it changes the other colums as well. I know that if I use Numbers, it will work, but I want to know how to do the same thing in Pages.
Hi Peter,
Numbers sorts full rows on values in selected column(s). The technique for sorting a single column is essentially the same as Jerry is describing for Pages tables—separate the (data in the) column to be sorted, sort it, return it to the table.
In Numbers the actual column may be separated from the original table, sorted, then returned. In Pages, the data must be extracted, sorted, then pasted back in, overwriting the unsorted data (if it was left in the original table).
iWork tables follow a database model in which each row is a Record, and each column holds a Field within the records.
As evidenced by the current question (and several similar questions arising in the Numbers community) that model doesn't apply to the way some users, especially some who come in from the MS Excel world, use tables.
With Excels model—islands of data on a single large table, the ability to sort one or a selected few columns of data makes sense. One 'island' may comprise only cells AA21:AH50. Sorting that small 'table' should be possible without disturbing the rest of rows 21-30, which are probably part of one or more other 'data islands' in the sea that is a MS Excel spreadsheet.
In Numbers, each of those 'islands' would be a separate Table, and that Table would be sortable without disturbing other Tables in the document.
Regards,
Barry -
hi, i don't know what to do i´m desperate in the last few days had appeared brown spots all over one side of the charger and begin to appear on the other side, seem to be burns ....what can i do? :s.... its is the first time it happened this to my charger in my three mac i had ....
Hmmmmm....
Does it get overly hot when used?
Can't decide whether they are the product of overheating or merely that someone sprayed some product nearby, that was incompatible with the plastic.
Ok, si compraste y registraste el equipo, tus datos estan en linea y el proveedor verificara el estatus de la garantia a traves del numero de serie. Tambien lo puedes consultar aqui: https://selfsolve.apple.com/ -
I have a book on my iPhone and iPad. Anyway to set it up so if I read on one the other will update?
answered
-
Bridge CC keeps crashing on start up but was working last week - Any Ideas how to get it back. Have tried uninstalling and re installing software. All other CC software working fine (Mac)
Also some problems since the CC2014... For me i can launch bridge but the crash occurs when i try to change access to any bridge preference... i open a discussion about it
-
I'm trying to delete some recently downloaded apps that don't work. They are faded grey and although they shake with the other apps, no cross appears in the top corner. Any ideas anyone? Thanks, Sean
I have the same issue witha slight variation. The app icons that are grayed out and cannot be deleted are DUPLICATES of other apps that I already have. For instance I now have 2 Redbox apps - one works normally, the other cannot be opened or deleted.
-
I just downloaded 950 photos on iPhoto and deleted them off my camera and now under last import there is only 4 photos and i can't find the others?? There is a whole bunch of blank events in the library with no photos in them all with todays date? Help!!
Yes - you need a min of 10 GB just to operate - with just 1 you certainly can lose photos and other critical things - you need to make space immediately - probably by moving your iPhoto library to a volume formatted Mac OS extended -
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN -
i have a macbook pro and need to send a password protected document to a pc based computer and it shows up at the other end as corrupted and they can't open it- any suggestions on how to make it work?
It was tricky sorting out the actual questions in your post. I think the other poster has one question in hand, here's the other:
Post by Turingtest2: HowTo: Grouping Tracks Into Albums - http://discussions.apple.com/message.jspa?messageID=9910895 -
Can you duplicate spreadsheets on numbers 3.2.2 so that if you edit one, the other will change accordingly? I am trying to edit one spreadsheet and use filters to change the different views in the other spreadsheets.
Hi Jono,
Your target cell and your base cell need to have the same address. Start with A1 for both. A variation of the formula needs to be in every cell of the second table. Fill down and to the right. You will see your target table appear.
quinn -
synced my wife's iphone under my acct and it updated software on the phone but now because it synced under my acct she cannnot open certain programs on the phone
I would test with another computer and another cable
if it the device would not be detected by any computer I
would say that it's connector was broken
Maybe you are looking for
-
New customer - Difficulty Getting Support
Prior to becoming a customer today, I had no problems with getting in contact with Verizon via chat. Now that I am a customer, I'm having a difficult time getting support. EVERY avenue of Verizon support is busy -- long hold times on the phone, no ch
-
Sales Order (Returns) for Approval / Reject
Hi, I have a Sales Order of Credit Only Order type. Existing Custom Workflow When the Customer Service creates Sales Order of Order Type Credit Only, it will got to AR dept for Approval/Reject. If the AR dept rejects, then a Notification will flow to
-
How to use PID function to control a DC motor? ?
Hi everyone, I wanna control a 6v DC motor using PID control toolkit 8.2. - a close loop control system with an encoder sensor - using a DAQ card model: NI USB-6008 - the DAQ card will be able to output pwm signal to the transistor then to my motor I
-
Lightroom CC will not open. How can I get it to open?
I just downloaded Lightroom CC but it will not open. Whats happening?
-
IPad2 not displaying some sites correctly
In Safari, two sites are not displayed correctly on my iPad 2. On dpreview the messages (threads) are not shown as they usually are. And in Apple Fourms the list of categories such as iPad, iPod, Safari, Mac OS etc. How can I return these sirptes to