Eugene!!!/Experts... plz help..!
hello ..
<b>Reg Error: Component 0DAT (version A) does not exist in the database </b>
As per the solution in the Note 828033, we need to first change as (our system from CUSTOMER to SAP to access the objects starting with 0) transport/systemtype = SAP
<u>How do we do this?? Plzzz help me providing the navigation steps,</u> as I am not able to create the 0DAT variable using SAP Exit with out the above setting..
Thanks & Regards,
Sapster.
Hello Mr.Cora..
thanks very much again for ur support. I am able to switch to SAP now!
After Switching to SAP , calling RRMX> Option Change Query(Global Def)> Calender Day(Context menu) > New Variable> parameters filled as shown in th screen shot below:
http://farm2.static.flickr.com/1247/848428953_22912607e9_o.jpg
After filling I am getting a message as shown in the screen shot below:
http://farm2.static.flickr.com/1247/848429023_2dc13b5ff5_o.jpg
And I have tried all the options discussed in the following thread:
Component 0DAT (version A) does not exist in the database
Note: When ever I am calling back RSA1/ calling BEx Applications through Start menu...I observed that the SAP instance is automatically switching back to CUSTOMER instance(despite manually switching it to SAP in the previous RSA1 Call)
Plzzz Help!! as I am not able to work with the queries properly.
Experts plzzz!!
Thanks & Regards,
Sapster.
Message was edited by:
sapster
Similar Messages
-
Experts plz help its very urgent
hi expert
plz help- me
previously i was getting dump in this statement
TRANSFER v_tab TO p_file.
FYI:
here v_tab is a table which hav som records
and p_file contains the path of a file like c:\new\ggg.txt
DATA: v_tab TYPE STANDARD TABLE OF t_line WITH HEADER LINE,
TYPES: BEGIN OF t_line,
pspid(9) TYPE c,
tab1 TYPE x,
post1 TYPE proj-post1,
tab2 TYPE x,
vernr TYPE prps-vernr,
tab3 TYPE x,
END OF t_line.
DUMP I WAS GETTIN :
For the statement
"TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "T_LINE". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
to avoid this dump i used feild symbol
assign V_TAB to <IN> casting.
p_file = <in>.
unassign <IN>.
nw there is no dump
but problem is p_file contains the contents of v_tab not the file path .
plz help me its very urgent
thanx in advanceHey, no probs,
after your initial declaration, do this.
TYPES: BEGIN OF n_line,
pspid(9) TYPE c,
tab1(15) TYPE c, "check the length you want
post1 TYPE proj-post1,
tab2(15) TYPE c, "check the length you want
vernr TYPE prps-vernr,
tab3(15) TYPE c, "check the length you want
END OF t_line.
DATA: n_tab TYPE STANDARD TABLE OF n_line WITH HEADER LINE.
now after you fetch data into v_tab,
move it to n_tab.
using a loop at v_tab and move corresponding fields to n_tab's work area
append to n_tab.
once you have populated n_tab and are ready to TRANSFER.
OPEN your file using
open dataset <file> for output in text mode encoding default.
now
loop at n_tab.
TRANSFER n_tab to p_file.
endloop.
CLOSE DATASET. -
Experts plz help me short dump
hi experts
plz help me
in ecc 6.0 gettin a short dump
THANKS IN ADVANCE
error is ::
For the statement
"TRANSFER f TO ..."
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "T_LINE". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
and it is coming in line::
LOOP AT v_tab.
TRANSFER v_tab TO p_file. "<b>this line contains error</b>
ENDLOOP.
FYI::
TYPES: BEGIN OF t_line,
pspid(9) TYPE c,
tab1 TYPE x,
post1 TYPE proj-post1,
tab2 TYPE x,
vernr TYPE prps-vernr,
tab3 TYPE x,
astnr TYPE prps-astnr,
tab4 TYPE x,
usr00(12) TYPE c,
tab5 TYPE x,
END OF t_line.
PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY. "DMA20040510
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
QUESTION:::
CAN WE USE FEILD SYMBOL IN IT
LIKE TRANSFER <Fs> TO P_FILE.Hi,
LOOP AT v_tab ASSIGNING <in>.
p_file = <in>.
ENDLOOP.
Best regards,
Prashant -
EXPERTS PLZ HELP ME IN SAP SCRIPT URGENT
Hi experts
plz help me
i m very new in sap scripts
i have a script WESCHEINVERS1 and the driver prog is SAPM07DR
i ill have to copy this script and have to add two more feild in the text element W1LGMAT
fields are :
CAWNT-ATWTB
EKPO-REVLV
now wat i think i cannot make changes to standard driver prog so it wud be better to call a subroutine 4 it
so plz guide me how i ill have to fetch data nd pass to the script
plz write the code if possible 4 u
FYI:
MSEG : Document Segment Material
MANDT Client
MBLNR Number of material Document
MJAHR Material Document Year
ZEILE Item in Material Document
MATNR Material Number
LIFNR Account number or vendor
EBELN Purchase order number
EBELP Item number of PO
EKPO : Purchasing document item
MANDT Client
EBELN Purchase order number
EBELP Item number of PO
MATNR Material Number
REVLV Revision Level
LFA1 : Vendor Master (General section)
MANDT Client
LIFNR Account number of vendor or creditor MSEG-LIFNR
SPRAS Language key
AUSP : Characteristic Values
MANDT Client
OBJEK Key of object to be classified MSEG-MATNR
ATINN Internal characteristic ZO-QUALITY-LEVEL
ATZHL Internal counter
ATWRT Characteristic Value
CAWNT : Value texts
MANDT Client
ATINN Internal characteristic ZO-QUALITY-LEVEL
ATZHL Internal counter AUSP-ATZHL
SPRAS Language Key LFA1-SPRAS
ATWTB Characteristic Value Description
thanks in advanceRefer the links to know about calling subroutines ins cript -
subroutine in script
How to call a subroutine in a script ?
EXTERNAL SUBROUTINE IN SAP SCRIPT
Regards,
Amit
Reward all helpful replies. -
Again got stuck with textpool experts plz help
hi experts,
plz help in resolving this issue this is very urgent.
error is
The line type of "RPOOL" must be compatible with one of the types
"TEXTPOOL".
and its coming in :
read textpool rname into rpool language sy-langu.
FOR YOUR INFORMATION:
form init_textpool using rname like rsvar-report.
FYI:
DATA: BEGIN OF RPOOL OCCURS 20,
ID(1),
NAME(8),
TEXT(80),
END OF RPOOL.
and textpool is also a structure u can check the fields in se11.
as the structure of textpool and rpool are not same
i cannot declare the type of rpool as textpool because it ill change the functionality of the prog because in the rest of the prog we r using the fields of rpool.
plz help me.hi atish
thanks 4 ur rply
solution provided by you is not giving error but i think it ill change your functionality.
i did this::::
data: begin of rpool occurs 20,
id(1),
name(8),
text(80),
end of rpool.
data: rname like rsvar-report.
data : RPOOL_1 LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
TYPEs : begin of RPOOL_1 ,
id(1),
name(8),
text(80),
end of rpool_1.
read textpool rname into rpool_1 language sy-langu.
MOVE-CORRESPONDING rpool_1 TO rpool.
write : rpool-id, rpool-text, rpool-name.
later on in the program we r using name and text fields but in this when i debugged it is nt able to identify name and text fields only showing the value of id bcoz id is also dere in textpool structure. -
hi all experts
plz help
i have an alv based on object oriented method
in the output i am gettin a toolbar in which i have two buttons like print and export
problem is
when i click on these buttons i am gettin short dump
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because
come across a statement that unfortunately cannot be executed.
plz tel me for printing do i need to wwrite any seperate event or any method for it
plz guide me
thanx in advance .*& Report ZMULTIPLE_ALV
*REPORT ZMULTIPLE_ALV.
report zrich_0006.
tables: mara.
type-pools: slis.
Internal Tables
data: begin of ialv occurs 0,
matnr type mara-matnr,
maktx type makt-maktx,
end of ialv .
Internal Tables
data: begin of ialv2 occurs 0,
matnr type mard-matnr,
werks type mard-werks,
lgort type mard-lgort,
end of ialv2 .
CLASS lcl_event_receiver DEFINITION Handles Double Click
class lcl_event_receiver definition.
public section.
methods handle_hotspot_click
for event hotspot_click of cl_gui_alv_grid
importing e_row_id.
private section.
endclass.
CLASS lCL_EVENT_RECEIVER IMPLEMENTATION Handles Double Click
class lcl_event_receiver implementation.
method handle_hotspot_click.
perform get_details using e_row_id-index.
endmethod.
endclass.
data: alv_container type ref to cl_gui_custom_container,
event_receiver type ref to lcl_event_receiver,
alv_grid type ref to cl_gui_alv_grid,
alv_container2 type ref to cl_gui_custom_container,
alv_grid2 type ref to cl_gui_alv_grid,
ok_code like sy-ucomm,
fieldcat type lvc_t_fcat,
gs_layout type lvc_s_layo,
fieldcat2 type lvc_t_fcat.
select-options: s_matnr for mara-matnr.
start-of-selection.
perform get_data.
call screen 100.
Module status_0100 OUTPUT
module status_0100 output.
data: variant type disvariant.
data: lt_exclude type ui_functions.
data: ls_fcat type lvc_s_fcat.
set pf-status '0100'.
set titlebar '0100'.
check alv_container is initial.
Code for first ALV Grid
Create Controls
create object alv_container
exporting container_name = 'ALV_CONTAINER'.
create object alv_grid
exporting i_parent = alv_container.
create Event Receiver
create object event_receiver.
clear fieldcat. refresh: fieldcat.
clear: ls_fcat.
ls_fcat-reptext = 'Material Number'.
ls_fcat-coltext = 'Material Number'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV'.
ls_fcat-hotspot = 'X'.
ls_fcat-outputlen = '18'.
ls_fcat-col_pos = 1.
append ls_fcat to fieldcat.
clear: ls_fcat.
ls_fcat-reptext = 'Material Description'.
ls_fcat-coltext = 'Material Description'.
ls_fcat-fieldname = 'MATKX'.
ls_fcat-ref_table = 'IALV'.
ls_fcat-outputlen = '40'.
ls_fcat-col_pos = 2.
append ls_fcat to fieldcat.
gs_layout-grid_title = 'Flights'(100).
CALL METHOD alv_grid->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = ialv[]
IT_FIELDCATALOG = fieldcat[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
call method alv_grid->set_table_for_first_display
changing
it_outtab = ialv[]
it_fieldcatalog = fieldcat[].
handler for ALV grid
set handler event_receiver->handle_hotspot_click for alv_grid.
Code for second ALV Grid
Create Controls
create object alv_container2
exporting container_name = 'ALV_CONTAINER2'.
create Event Receiver
create object alv_grid2
exporting i_parent = alv_container2.
clear fieldcat. refresh: fieldcat.
clear: ls_fcat.
ls_fcat-reptext = 'Material Number'.
ls_fcat-coltext = 'Material Number'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '18'.
append ls_fcat to fieldcat2.
clear: ls_fcat.
ls_fcat-reptext = 'Plant'.
ls_fcat-coltext = 'Plant'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '4'.
append ls_fcat to fieldcat2.
clear: ls_fcat.
ls_fcat-reptext = 'Store Loc'.
ls_fcat-coltext = 'Store Loc'.
ls_fcat-fieldname = 'LGORT'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '4'.
append ls_fcat to fieldcat2.
call method alv_grid2->set_table_for_first_display
changing
it_outtab = ialv2[]
it_fieldcatalog = fieldcat2[].
endmodule.
Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
case sy-ucomm.
when 'BACK' or 'CANC'.
if not alv_container is initial.
call method alv_container->free.
clear: alv_container.
free : alv_container.
endif.
if not alv_container2 is initial.
call method alv_container2->free.
clear: alv_container2.
free : alv_container2.
endif.
if sy-subrc = 0.
set screen 0.
leave screen.
else.
leave program.
endif.
endcase.
endmodule.
FORM GET_DATA.
form get_data.
select maramatnr maktmaktx
into corresponding fields of table ialv
from mara
inner join makt
on maramatnr = maktmatnr
where mara~matnr in s_matnr
and makt~spras = sy-langu.
sort ialv ascending by matnr.
endform.
FORM GET_MORE_DATA.
form get_more_data.
select matnr werks lgort
into corresponding fields of table ialv2
from mard
where matnr = ialv-matnr.
sort ialv2 ascending by matnr.
endform.
GET_DETAILS
form get_details using index.
read table ialv index index.
if sy-subrc = 0.
perform get_more_data.
call method alv_grid2->refresh_table_display.
endif.
endform. -
Experts plz help report issue need help
hi experts
plz guide me in this report
i hav a transaction MD4C
when we call this transaction it displays a report showing material numbers with some details for a corresponding sales order number
if any of material is missing or problem arises it creates an icon in front of tha material number
now i will have to create a report which will show all the material numbers which are missing orhave this error icon .
Please guide me how should i proceed
what should be the best approach of my report .hi,
you can analyze that report and find logic used for that icon generation, take the same logic for writeing u r report program. you can see the code of the transaction code
1) type the transaction code, press enter
2) system ---> status
3) double click on program(screen) field.
This will take you to source code, their you do analyzation.
regards,
pavan -
FI extraction details--- experts plz help...
Hi Gurus,
Can somebody help with these questions in FI extraction
1. What are the areas or sections in FI , like in LO we have purchasing, SD, PP...Inventory. Becoz i have seen as FI-GL,AA, AR..Plz explain what are they actually and what is the flow. How these areas are related to each other.
2. What are the different tables involved in FI extraction , for example in LO we have SETUP TABLES, EXTRACTION QUEUE, DELTA QUEUE, UPDATE TABLES.
3. What is the actual flow in full load and Delta load in FI applications ...for example in LO we have V1, V2, V3 used for saving records from Application tables to statistical tables, to extraction queue or update tables and then to Delta queue. or if full load through setup tables. So kindly guide me the flow of the FI plz
4. How is Delta management done and how to manage please kindly give me the indepth details step by step so that i can understand the deltamanagement.
any documents will be highly appriciated.
[email protected]
thanks and regards
HarishHi Farhan,
thanks for the info ....i think i have lots to read and understand.
So if you can let me know specifically the tables connected and from where the data is picked for the below data sources and as well as the delta management tables associated.
FI-GL
FI-AA
FI-AP
FI-AR
After reading some data i could understand that Balance sheet and P &L ACCOUNTS are prepared from FI-GL.
Sales and distribution will have a link to FI-AR.
Materials Management will have a link to FI-AP.
Once again thanks for your help and i am sure your docuement on SAP tables and links will help me a lot to understand the mechanism.
Hi Sorabh.
Thanks for the info, so the tables you mentioned for Delta are common for all these application components am i right.
So do they store the delta data or else they will have a record for each change....What is the difference between these two tables..used for delta.
Thanks and regards
Harish
Message was edited by: H.B -
Plz help me TEXTPOOL PROBLEM(VERY URGENT)
hi experts,
plz help in resolving this issue this is very urgent.
error is
The line type of "RPOOL" must be compatible with one of the types
"TEXTPOOL".
and its coming in :
FORM GET_SELSCREEN_TITLE TABLES P_SCREENS STRUCTURE DYNNR.
DATA: BEGIN OF RPOOL OCCURS 20,
ID(1),
NAME(8),
TEXT(80),
END OF RPOOL.
READ TEXTPOOL RSVAR-REPORT LANGUAGE SY-LANGU INTO RPOOL.
plz help me.Hi !
Try this :
DATA RPOOL LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
Reward if usefull,
Regards,
Stéphane. -
Plz help me solving following issues
Hi SD experts,
Plz help me solving following issues
1) What do you mean by POD(proof of delivery) what is the use of pod? What are the con figuration you done in your project?
2) When I am punching order after entering data like material No and quantity system should pop-up a screen of delivery date and status and invoice data and details, How can we configure this?
3) Client requirement is he want horizon period in days format. but standard sap system It's in months format(gray mode). how can we change months to days?
4) Quotation has been created for product-D, 10 quantities, sales order is created with reference to the quotation, system copies 10 quantities in sales order. How do you restrict in sales order end user should not change quantities, system should not allow for changes by en user?
5) when i creating the sales order the system show error "No customer master record exist for sold to party". How to rectify it?
suitable solutions will be rewarded
thansx & regardshi,
Proof of delivery (POD) is an instrument involved in business processes in which an invoice is issued only after the customer has confirmed the delivery's arrival. In addition to the proof of delivery itself, you can also record the POD date, POD time, the actual quantity that arrived and the reason for possible differences in quantities. This is especially important for deliveries where the delivery quantity varies because of the nature of the goods or for which the exact delivery quantity is unknown from the start.
You are now in a position to issue an accurate invoice based on the customer's confirmation of goods received. You no longer need to create credit memos. The reasons for deviation that occur most frequently in "real world" scenarios such as stock shrinkage, theft, certain characteristics of goods (volatility, for example), and transportation damage are recorded and analyzed in the system. This analysis is especially valuable when you are negotiating with forwarding agents, vendors, or customers, since all deviations can be reflected
With regards
Rajesh -
Plz help production issue(smartform)
hi experts plz help its a production issue
i have a box in my smartform in which in one line i can only show 50 characters .and i have a text of 70 characters but i only have to show 50 characters from 70 characters .
now wat i did i stored 70 characters variable into 50 char variable abd displaying it .
but the issue is
if i want to print .
hi this is sdn and here u can get all the information about sap .
now lets say
i of information is the 46th character of my line
now what is happening it is coming like
hi this is sdn and here u can get all the
infor
its showing 50 character only but if word is not completed it is printing it in next line.
it should print like
hi this is sdn and here u can get all the infor
plz help how to do it
thanx in advance .code i am using is ::::::::::::::::::::::::::::::::::::::::::::::::
data : TEXT_3I56(50) type c .
move is_bil_invoice-hd_gen-bil_number TO textname.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = '0002'
language = is_nast-spras
name = textname
object = 'VBBK'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
tables
lines = t_lines_3156
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*describe table t_lines lines n.
*if not n is initial.
*bank_note = 'X'.
*endif.
READ TABLE T_LINES_3156 INDEX 1 .
IF SY-SUBRC = 0 .
TEXT_3I56 = T_LINES_3156-TDLINE .
ENDIF. -
Plz help upgrade issue moving data from char type structure to non char typ
Hi Experts
plz help its very urgent
Data :workout(5000) .
FIELD-SYMBOLS : <FS_WORKOUT> TYPE ANY.
workout = ' u' .
ASSIGN WORKOUT TO <FS_WORKOUT> CASTING TYPE C .
BAPISDITM = <FS_WORKOUT>.
i am getting dump after BAPISDITM = <FS_WORKOUT>.
i think i am getting the dump bcoz i am moving character type structure to non character type structure but i think with field symbols we can remove this issue thats y i used it but its not working plz help me
its very urgent
*dump is :*
Short text
Data objects in Unicode programs cannot be converted.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZSDR0009" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
How to correct the error
Use only convertible operands "dst" and "src" for the statement
"MOVE src TO dst"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UC_OBJECTS_NOT_CONVERTIBLE" " "
"ZSDR0009" or "ZSDR0009_I02"
"USER_COMMAND"
thanx in advancei got d solution in this thread
Hi all,
data: gv_line(6000) type c.
Bvbapkom = gv_line.
But i am getting the Error like : gv_line and Bvbapkom are not mutually convertable.
Note: Bvbapkom is a Structure
How do i solve this ?
Mahesh
KR
Posts: 210
Registered: 11/24/06
Forum Points: 0
Re: gv_line and Bvbapkom are not mutually convertable.
Posted: Nov 30, 2007 8:40 AM in response to: KR Reply
Hi ,
i got the solution
ANSWER:
Field-symbols: <X_Bvbapkom> type x,
<X_gv_line> type x.
Assign: Bvbapkom to <X_Bvbapkom> casting,
gv_line to <X_gv_line> casting.
<X_Bvbapkom> = <X_gv_line>.
Nasaka Ramakris...
Posts: 4
Registered: 1/19/08
Forum Points: 20
Re: gv_line and Bvbapkom are not mutually convertable.
Posted: Jan 19, 2008 7:42 AM in response to: KR Reply
Hi Check this answer.
ANSWER:
Field-symbols: <X_Bvbapkom> type x,
<X_gv_line> type x.
Assign: Bvbapkom to <X_Bvbapkom> casting,
gv_line to <X_gv_line> casting.
<X_Bvbapkom> = <X_gv_line>. -
Plz help include activation error
Hi experts
plz help me getting this error
when i activate include getting this error
REPORT/PROGRAM statement missing, or program type is I (INCLUDE).
plz help me and tel me hw to rectify it.hi anit,
do one thing..go to SE80 --> enter program name --> and right click on the program name > click on activate> this will activate the include....
hope this will work out...
please rewards points in case usefull...
regards,
prashant -
Plz Help me Jump from DAYPR to detailed log
Hi Experts,
Plz help me to slove this issue
while running payroll simulation iam getting the error as JUMP from DAYPR to detailed log Incorrect generation of WTS...
it is negative time recording, the personnel number is assigned to '0' in IT07, but it is showing the same error
Plzzzzzzzzz.....
suggest me to slove this error...
points will be rewarded ....
Thanks
ShravaniHi,
Check the processing classes.
Maitain the values in the following tables..
T555E-Message Descriptions
T551C-Period work schedule evaluation
V_551C_B-Valuation class for Periodic work schedule
V_t508A-Work schedule rule
V_001P_H-Personnel Subarea grouping for Time Recording
V_T555Z- Time type Determination
V_T510S-Time wage type selection rule
I guess your problem will be resolved.
Thanks and Regards,
Revathi. -
Plz help selection screen desplay issue
Hi experts
plz help
small query
i have two fields
dateto and date from in my selection screen
i ill have to use parameter for both the feilds i cannot use select-options here
but wen i m using parameter its coming line by line
like
p_dateto "i/o feild"
but i want like we get in select option
p_dateto "i/o feild" p_datfrm "i/o feild"
plz help me doin this .
thanx i9n advance.hey,
why dont u use select-options?
but if u want parameters only,
u can do like below.
selection-screen begin of screen <scrno>.
selecion-screen begin of line.
parameters: date_from type sy-datum,
date_to type sy-datum.
selection-screen end of line.
selection-screen end of screen <scrno>.
Message was edited by:
Hymavathi Oruganti -
ALV codeing...plz help urgent
Hi Experts,
I am new to Abap.i hav a simple spec but i need to do it in ALV so plz help me.
Sales organization LIKP VKORG
Shipping point/receiving pt LIKP VSTEL
Delivery LIKP VBELN
Delivery date LIKP LFDAT
Delivery type LIKP LFART
Pland gds mvmnt date LIKP WADAT
Actual gds mvmet date LIKP WADAT_IST
Ship-to party LIKP KUNNR
Sold-to party LIKP KUNAG
Posting Status Customized fields ZCHK
If LIKP-WADAT = WADAT_IST, then print "OK", else " Posting Error"
this is a small requirment.plz help me in this it should be in ALV format.
correct answers will will given full points.
Thnaks & Regards
Sunita.
PLz Experts plz help me.Hi,
First get the a data into internal table first then fill the field catalog and give it to FM.
For futher reference <b>Goto to se80 and givepackage slis and see the programs in
slis.</b>type-pools: slis.
data:
i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.----
> internal-table fieldaname
wa_fieldcat-tabname = 'I_MARA'.-------> Internal table name
wa_fieldcat-reptext_ddic = 'Material no.'.
wa_fieldcat-outputlen = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERSDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Creation date'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERNAM'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Name of Person'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LAEDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = ' Last Change'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " prepare_fieldcatalog
*& Form display_alv
text
--> p1 text
<-- p2 text
FORM display_alv .
Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = i_fieldcat----->fieldcat name
tables
t_outtab = i_mara.------> internal table
ENDFORM. " display_alv
<b> plzzzz reward points if it is useful.</b>
Maybe you are looking for
-
I am trying to make a new dvd from another one and in disc utilities when new image is clicked the error message tells me "permission is denied. " If I click, verify permissions, before clicking New Image it tells me"Not available because the selecte
-
Latest Firmware for WRT300N V1.0
I have WRT300N V1.0 with Firmware v1.03.6. Anybody know what is latest Firmware for WRT300N V1.0 and where I can get it. I tried at Downloads under Support in Cisco website but it said "No firmware/driver download available". Thanks
-
HT1719 We have 3 ipods. How do I set up 3 different itunes accounts?
We just got multiple ipods in the house. We don't want the same music. How do I set up different itunes accounts? Or do I have to create playlists and put the playlists on the shuffles?
-
Only hear background video footage even though I've adding recorded music
Hi, hopefully a simple one and down to user error! I've shot video footage before and added music tracks with out problem. This time I tried to add a music file from iTunes but to a particluar part of some video footage, to find that only the backgro
-
I am a licensed user of Acrobat Standard 7.0. My computer crashed several months ago, and I have been trying....and TRYING...to re-load Acrobat, after contacting CS. I was sent an ftp download link that didn't work....and your 'chat' is always 'busy'