Event data_changed - Can't export all global table values
METHODS handle_data_changed_pop
FOR EVENT data_changed OF cl_gui_alv_grid
IMPORTING er_data_changed.
I trigger that with methoch check_data_changed..
Er_data_changed delivers the rows that are changed.
With this information I enrich the global table I have for set_table forfisrt_display.
Also I enrich this table with some other information.
I lose the some new information in the global table after I leave these methods - excpesially check data.
I don't know what to do...
Database Modify does also not work at that place of code... Is there a reason?
Hello Ezachiael
You should use the event handler method HANDLE_DATA_CHANGED only for validating new and modified data.
If you need to enrich your OUTTAB itab based on the input data just trigger PAI from your event handler method using:
CALL METHOD cl_gui_cfw=>set_new_ok_code ( ok_code = 'ENRICH_OUTPUT' ).
PAI is triggered with this new ok-code and HERE you should enrich your OUTTAB because all the changes from the ALV grid control (frontend) have now been forwarded to you ABAP itab (backend).
Regards
Uwe
Similar Messages
-
HT4436 How can I export all my icloud contacts to Outlook?
How can I export all my icloud contacts to Outlook?
If you want to sync via iCloud the following gives instructions on setting up iCloud on your computer: http://www.apple.com/icloud/setup/
If it is a Mac running Mavericks (OS X 10.9) contact syncing is done via iCloud only. If you don't have a Mac you can also sync contacts via iTunes http://support.apple.com/kb/ht1296 -
Can you export all the tracks to protools?
Even the virtual drummer or do you need logic
the texas governor wrote:
Can you export all the tracks to protools?
http://www.bulletsandbones.com/GB/GBFAQ.html#openinprotools
(Let the page FULLY load. The link to your answer is at the top of your screen) -
How can I make all the Tables in my spreadsheet to work as one?
I made a spreadsheet for work in Numbers '09 but do to the computers that we have at work, I have to have it exported to Windows Excel, but when I try to export the spreadsheet since I used more than 1 table to create this spreadsheet, each table is converted to an Excel worksheet, and all other objects are placed on separate worksheets since there's more than one table. and I want to know is there anything I can do, to export everything in one spreadsheet, for all the tables to work as one spreadsheet. PLEASE HELP!!
You may be able to easily consolidate all your tables into one big table to make it equivalent to an Excel worksheet. You can copy/paste from one table to another and you can drag columns or rows from one table and insert them into another. Note that formulas that use column letters or row numbers instead of specific ranges (i.e., B instead of B2:B10) will now refer to the entire column/row in the destination table.
Without doing this, all the tables, when exported to Excel into separate worksheets, should still work together just like they did in Numbers. Are you saying that they do not?
Not much you can do about objects. -
One of our customers is moving from our application (which uses Advantage Database Server) to another application (which uses other database technology). They have asked us to help export their data, so that they can migrate it to another database system. So far, we have used the Advantage Data Architect (ARC32) "Export Table Structures as Code" functionality to generate SQL. We used the "Include existing data" option. The SQL contains the necessary code to recreate the tables and indexes. The customer's IT staff will alter the SQL statements as necessary for their new system.
However, there is an issue with the Primary Keys in these table. The resulting INSERT statements use AutoInc as the type for the Primary Key in each Table. These INSERT statements contains "DEFAULT" for the value of each of these AutoInc fields. The customer would like to output an integer value for each of these Primary Key values in order to maintain referential integrity in their new system.
So far, I have not found any feature of ARC32 that allows us to export the Primary Key values. We had been using an older version of ARC32, since our application does not use the latest version of ADS. I did download the latest version of ARC32 (11.10), but it does not appear to include any new functionality that would facilitate doing this sort of export.
Can somebody tell me if there is such a feature in ARC32?
Or, is there is another Advantage tool to facilitate what we are trying to accomplish?
If there are no Advantage tools to provide such functionality, what else would you suggest?George,
It sounds like the approach you are using is the correct one. This seems to be the cleanest solution to me especially since the customer is able to modify the generated SQL statements for their new system.
In order to preserve the AutoInc values I would recommend altering the table and changing the field datatype from AutoInc to Integer. Then export the table as code which will export the actual values. After the tables have been created on the new system they can change the field datatype back to an AutoInc type if necessary.
Regards,
Chris Franz -
Where can we get all the posting values?
Hi team
My requirement is like this............
In TDs report my client wants all the values from /4me,/4mh,/4ms and /460. For this our abaper generate a report like this, he picking the values from RT for /4me,/4mh and /4ms which are not posted to Finance, and/460 picking from PPOIX table which is posted one.
Now my client wants all the posting valuesfor above mentioned tech wagetypes.For this ,in PPOIX table there is only /460 value.
Is there any other table or any function module to call all the posted values for above mentioned Tech wagetypes?
Regards
GoripartiDear Balaji
Go to OIDV, give some file name in PC Database, select the client from "RFC destination", which you would like to download, and give some table name from which you would like to see the field details and select either "Download" or "Log" and execute.
This will give you all details including the field length.
thanks
G. Lakshmipathi -
Can't Export ALL Comments from Issues Tracking app in Sharepoint 2013
I really like the flexability of the SharePoint 2013 Issues Tracking application. I am able to enter the initial issue, then update it regularly with "comments". Each comment is added as a seperate entry to the issue, date stamped, etc.
The issue I am having is in exporting this to Excel. I know, I know, the purpose of SharePoint is that you DON'T turn everything into an Excel spreadsheet. However, I have to send the issues to an external contact that does not have access to the SharePoint
environment. When I export to Excel, it only adds the LAST comment to the Comments column in the spreadsheet. I need all comments combined, and dropped into the correct cell.
Is there a way to do this? I found another thread where it seemed everyone accepted the fact that this was not possible, but I thought I'd try one more time and see if there were any new ideas.
I believe this is tied to the option of "Append Changes to Existing Text" that is available in the Edit Column settings for the Issues Tracking app. I see that you can turn this off, but then you lose the ability to date-stamp each entry. If there
is no good solution, then I think the only alternative would be to turn this off, then just manually add a date to each time.
Word of caution!! If you have a bunch of comments already appended, and THEN you decide to change the option from Append Yes to Append No, it will hide all previous comments. I did this and thought I'd lost them, but when I changed the option back
to Append Changes, they were all still there. I may need to manually cut-paste every single comment out, change to Append No, and then manually past the entire comment thread back in. Will be very tedious for a large issues log.
Thank you.
BillUpdate - The only solution I was able to change to "Append Changes to Existing Text", then do as I dreaded, which was to manually cut and past every comment out then back into the single field. Definitely a good lessons-learned to set the
value to "Append Changes to Existing Text" before starting. -
How can i find all global variable and parameters in a form?
I don't know name of global variables and parameters,but i want get their name and value .
how can i do? who can help me?
Thank you.
Daniel Liang
2007.1.19no problem. As Francois said you can't do it programmatic in runtime.
But when you use the debug-mode you can see each global with name and value.
By the way: It's not good to not know all the globals in your application. This is one of the most important things you have to write down for your app. Create a wiki for such informations, so that all developer can share their information. -
Can i Download all ddic table objects on local disk
Dear experts,
I want to make a reports in which i give a table name and press save button .It save all fields , technical settings at all ,eveything in local disk.
What should can i do for that.
Thanks,
jateinhi jatin,
u can download the smartform.
Go to tcode smartforms. Give the name of the smartform that u want to download to the local drive.
Go to the menu and choose the option utilities -
> download form.
Give the local path where u have to store the smartform.
Thanx
Biswa -
I Originally setup Aperture years ago to "Manage" my huge amount of photos to save space and be more convenient. I have bought a new external HD and want to export my entire original files from all the different projects and sub projects from the one "Organized Managed" file to individual original photo files on the new HD. I know how to export a project or even a few at a time but what about 1.5TB of photos in RAW/NEF format? Thanks for the help my fellow Apple lovers.
Aperture makes it easy to move any Image's Originals from inside the Library to outside the Library, and from any directly-connected location outside the Library to another directly-connected location, and to move any Image's Original from outside the Library to inside the Library, at any time, singly or in batch.
Select the Photos container near the top of the Library Inspector. In the Browser, select all Images. Use "File ▹ Relocate Original", and select a destination and a Finder folder scheme. Moving 1.5 TB of files will take some time. Let it run. -
Can I export a Numbers table to the body of a message in Mail?
Here's what I'd like to do. I want to create some simple lists in Numbers or Pages in the form of a table. I would then like to import that into the message body of a message in Mail. I've tried to cut and paste, but that just ends up with a jarbled mess. Any gurus out there know how to import iWork content into a Mail message? Thanks!
DanI selected this area in Numbers (two two left tables) and paste into a new Mail Message:
I believe the image that was automatically pasted is a PDF file. Note that the tables were selected, not the data within the tables.
Regards, -
I would appreciate an answer from someone who has encoiunted this particular problem, and/or who in knowledgable about it. Thansk
Happy New Year to all!
I made a test and I confirm what I was suspected at first place.
I uploaded a photo taken from my iPhone to the shared photo stream. Then I imported this photo from the photo stream to my iPhoto library on my Mac. The resolution in which this photo is stored locally is 2048x1536 and its size 961 KB.
Then I sent the same photo from my iPhone via e-mail. I opened the email on my computer and downloaded the photo. Then I imported it to my Mac´s iPhoto library. I checked the info out and the resolution is now 3264x2448 and size 2.2 MB.
Therefore the quality and resolution of the photos that are uploaded to the icloud photo stream is NOT the same as the original one.
I don´t know whether there is somewhre an option to change that, but this is what happens to me right now. -
Can't get the internal table values
hi all,
i have created a report in which i have DISPLAY EKPO-BANFN and EKKO-EBLEN.For this reason i have created an internal table gi_final,in which my values of both table are coming through.Following are the codes and structure of internal table:
BEGIN OF gi_final OCCURS 0,
matnr LIKE ekpo-matnr,
ematn LIKE ekpo-ematn, "Material Number
txz01 LIKE ekpo-txz01, "Mareial Description
ktmng LIKE ekpo-ktmng, "Quantity
netpr LIKE ekpo-netpr, "Rate
anfnr LIKE ekpo-anfnr, "RFQ No.
banfn LIKE ekpo-banfn, "Purchase Requisition Number
ebeln LIKE ekko-ebeln, "Purcahse Order
ekorg LIKE ekko-ekorg,
bstyp LIKE ekko-bstyp, "Purchasing Document Category
submi LIKE ekko-submi, "Collective Number
lifnr LIKE ekko-lifnr, "Vendor Number
bedat LIKE ekko-bedat, "Purchase Order Date
END OF gi_final.
select ekko~ebeln ematn txz01 ktmng banfn
from
ekpo
inner join ekko on
ekpo~ebeln eq ekko~ebeln
into
corresponding fields of table gi_final
where
ekko~ekorg in s_ekorg and
ekko~ebeln in s_ebeln and
ekko~submi in s_submi and
ekko~lifnr in s_lifnr.
READ TABLE gi_final WITH KEY ebeln = gi_final-ebeln.
MOVE gi_final-banfn to gi_detail-banfn.
MOVE lv_netpr to gi_detail-netpr.
MOVE gi_final-ematn TO gi_detail-ematn.
MOVE gi_final-txz01 TO gi_detail-txz01.
MOVE gi_final-ktmng TO gi_detail-ktmng.
Probelm is that when i execute it with Debugger my internal table can't get the values of EBELN and BANFN.
Thanks & Regards,
sapabappk
Edited by: sapabappk on Sep 26, 2010 10:32 AMHI ,
BEGIN OF gi_final OCCURS 0,
matnr LIKE ekpo-matnr,
ematn LIKE ekpo-ematn, "Material Number
txz01 LIKE ekpo-txz01, "Mareial Description
ktmng LIKE ekpo-ktmng, "Quantity
netpr LIKE ekpo-netpr, "Rate
anfnr LIKE ekpo-anfnr, "RFQ No.
banfn LIKE ekpo-banfn, "Purchase Requisition Number
ebeln LIKE ekko-ebeln, "Purcahse Order
ekorg LIKE ekko-ekorg,
bstyp LIKE ekko-bstyp, "Purchasing Document Category
submi LIKE ekko-submi, "Collective Number
lifnr LIKE ekko-lifnr, "Vendor Number
bedat LIKE ekko-bedat, "Purchase Order Date
END OF gi_final.
select ekko~ebeln ematn txz01 ktmng banfn
from
ekpo
inner join ekko on
ekpoebeln eq ekkoebeln
into
corresponding fields of table gi_final
where
ekko~ekorg in s_ekorg and
ekko~ebeln in s_ebeln and
ekko~submi in s_submi and
ekko~lifnr in s_lifnr.
READ TABLE gi_final WITH KEY ebeln = gi_final-ebeln.
MOVE gi_final-banfn to gi_detail-banfn.
MOVE lv_netpr to gi_detail-netpr.
MOVE gi_final-ematn TO gi_detail-ematn.
MOVE gi_final-txz01 TO gi_detail-txz01.
MOVE gi_final-ktmng TO gi_detail-ktmng.
Why you are reading gi_final table and comparing same table field gi_final-ebeln ?
how is gi_detail table declared ?
just do like this
loop at gi_final .
MOVE gi_final-banfn to gi_detail-banfn.
MOVE gi_final-ematn TO gi_detail-ematn.
MOVE gi_final-txz01 TO gi_detail-txz01.
MOVE gi_final-ktmng TO gi_detail-ktmng.
append gi_detail .
clear gi_detail
endloop.
and From where you are getting value of lv_netpr
MOVE lv_netpr to gi_detail-netpr.
then you will get data in gi_detail
Regards
Deepak. -
How get the all the table values to another table based on Action
Hi All,
I am new to webdyn pro.
I have two tables Table1 and Table2 with context nodes Tab and Tab1.
Table1 I have a button Save If I submit Save the data from first table to second table .
I was written the code
IPrivateTableScrollBar.ITabElement element;
for(int i=0;i<10;i++)
element=wdContext.createTabElement();
element.setName("test"+i);
element.setSal("100"+i);
wdContext.nodeTab().addElement(element);
added some data to first table.
how can I get the all 10 rows from first table to second table if I write wdContext.node<Element>.getName() and getSal() I can get only selected one row .how can I get the all rows in a sigle click to second table.
please help.Hi mohammed,
Use the following lines of code to iterate through the elements :
Iprivate<your view>.I<your node1 name>Element elmt1 = null;
Iprivate<your view>.I<your node2 name>Element elmt2 = null;
for(int i=0;i<wdContext.node<your node1 name>().size();i++)
elmt2 = wdContext.node<your node2 name>().create<your node2 name>Element();
elmt1 = wdContext.node<your node1 name>().get<your node1 name>ElementAt(i);
elmt2.set<attribute name>(elmt1.get<attribute name>);
wdContext.node<your node2 name>().addElement(elmt2);
Hope this helps,
Best Regards,
Nibu. -
Can't export ColorMode or ICCProfile values
I have had good luck exporting file metadata with JavaSCript so far, but there are two properties that keep returning "undefined"; photoshop:ColorMode and photoshop:ICCProfile.
Other photoshop properties export just fine, but nothing I've tried works for these two. I thought it might be because they are "internal" properties, but I am able to export other "internal" properties, such as exif xResolution.
var cm= xmpData.getProperty (XMPConst.NS_PHOTOSHOP, "ColorMode");
if (cm !== undefined){
dataExport.write ('\t' + cm);
else{
dataExport.write ('\t');
var icc= xmpData.getProperty (XMPConst.NS_PHOTOSHOP, "ICCProfile");
if (icc !== undefined){
dataExport.write ('\t' + icc);
else{
dataExport.write ('\t');
Thanks,
Greg ReserThanks Paul, that does help but it turned out that my problem was a corrupted image. I was still getting no results with toString() so I started testing other images. I was able to export ColorMode and ICCProfile eother with or without toString() leading me to believe that Bridge can, in some cases, figure out if the data is a number or a string. This is not true if you are going to perform an action on the data, like split or Math. In those cases you have to make sure the data is of the correct type.
This post might really be about the oddities of corrupted files. The file in question displays data in the file info panel and the Bridge metadata palette display all the data correctly and the raw XMP file looks normal as far as I can tell.
Thanks for the help,
Greg
Maybe you are looking for
-
i recently bought a new computer and installed itunes and downloaded music already... I want to sync my new music into my ipod but it wont let me it says my ipod is linked to another itunes library, so If i want to go ahead with the process it says i
-
Where is the location of the trigger's message
I want to find the following trigger's message , as well edit it. U2$FORM_ERRORS.PUSH('CON-12210', 'I', 'OFG', 0); RAISE FORM_TRIGGER_FAILURE; ***message content like that "information:your invoice data is not found for this query..."*** I couldn't s
-
I was having issues with itunes when it updated to 11.0.2 (not responding/ freezing and unable to force quit). After doing some internet research I waited and updated to 11.0.3 (all problems seemed to stop). However, though I was able to download som
-
Can't import video (.mov) from Coolpix P100 camera to iPhoto
I can't import any .mov files from my Coolpix p100 camera to iPhoto (iPhoto '08, version 7.1.5) Mac OS X 10.4.11. I can import pictures no problem when I use a firewire connection from the camera to my iBook G4. This is the message I get: Unreadable
-
When-tab-page-changed trigger PL/SQL
I have a form which Has two tabbed regions Can Anyone please let me know how to write the PL/SQL for the when tab page changed trigger for this scenario. I can do it for single tabbed region but cant understand how to do it for 2 or more tabbed regio