Event From Directory Change
Is there a way I can get an event from a directory change? I've looked into FileSystemWatcher but from what I could gather, that would only notify my of a change within a directory. I wanted something that tells me exactly what changed. i.e. if a new file was added, changed, renamed etc. Instead of throwing a general event, where I would than have to compare the changes to the previous state, i.e. file names within the directory, file sizes etc. Basically it would save alot of post processing work. Since I haven't seen anything of this nature in the forums, it might not be posible, but I thought I'll ask just incase.
Thanks
Kas
Be advised that individual applications can generate multiple FileSystemWatcher events for what you as a consumer would treat as a single event.
Something as simple as saving a file in notepad can generate 7 or 8 events.
The link below is not LabVIEW related, but does point out how FileSystemWatcher works...
http://www.codeproject.com/Articles/58741/FileSystemWatcher-Pure-Chaos-Part-2-of-2
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness
Similar Messages
-
Events from iCal changes when synced with phone :-((
Hi! I've just bought a bluetooth adapter so I can sync my phone with ical. I'm convinced this will bring me one step closer to a digital synchronized heaven, but (of course) I encountered a problem:
When I have added an event to my phone (Sony Ericsson T610) and syncs the calendar with my laptop (iBook G4 933 MHz), the event is "postponed" by two hours. For example: I have an appointment with - say - Pamela Anderson from 12:00 to 15:00 which I add to my phone. When syncing with iCal, the event has changed to 14:00-17:00.
When I add the event to my laptop first, and then syncs it with the phone - the time of the event is set two hours earlier . To take my great example again, the event would then appear to be from 10:00-13:00.
I've gone through all preferences etc. I can find in both iCal, iSync and on the phone. I've found no help online either... Does anyone have a clue? If so, please give me a hint on what to do, I would be immensely grateful!I was convinced that my time zone was GMT, but when I checked it was GMT +2 hrs, which solved my problem! Thank you so much Julian for helping me solve this, I cant wait to start a synced life
iBook G4 933 MHz Mac OS X (10.4.6) 640MB RAM -
Hello all,
I'm currently setting up a Proof Of Concept setup with directory synchronisation and password syncing to Office 365, leveraging AAD Premium for the password reset and password writeback to on premises
AD functionality. Directory Sync + Password Sync is working flawlessly with the AADSync tool. However, upon requesting a password reset for a user, I'm hitting a password writeback error. The webpage states that the password does not meet the password
complexity policy, while it does. I can set that particular password for that account at the on premises AD without any problem.
In the event viewer at the AADSync server, I'm seeing this Error pop up whenever I try to reset the password:
An unexpected error has occurred during a password set operation. "BAIL: MMS(4032): ..\server.cpp(11003): 0x80230619 (A restriction prevents the password from being changed
to the current one specified.) Azure AD Sync 1.0.0475.1202"
My Setup:
Windows Server 2012 AD with a single forest
Seperate domain joined Windows Server 2012 for AADSync tool
AADSync version 1.0.0475.1202 with options password sync, password writeback enabled
Service account for AADSync tool with Replicating Directory Changes and Replicating Directory Changes All permissions
on root AD forest structure with inheritance to all objects. This account also has the permissions to Change Password and Reset Password on all descendant
User Objects.
AAD Premium for my office 365 tenant
AAD Premium licenses for the test users and the office 365 account used to sync to Office 365. This account is also Global Admin.
Could anyone help me with this? Is there something I’m missing here? My guess is that the AAD is not trusted or the service account for AADSync tool does not have the proper permissions. I’ve tried
many options, like setting the AADSync Service account to Enterprise Admin or granting the service account Full Control over that particular user.Concerning my issue:
The Default Group Policy setting: Minimum Password Age is set at 1 day. As I was testing this feature with new users, their provisioned passwords were less than 24 hours old and the Minimum Password Age of 1 prevented the change of the password.
After changing this to 0 days in the Default Group Policy, my password resets started working for newly created users. While this might not have affected existing users in production, it had me looking and searching for permission issues on my AD.
So for those that might be experiencing ADSync Event ID 6329 and PasswordResetService Event ID 33008 Errors when trying to do a Password Reset using AAD Premium with Password Writeback, it might be helpful to check the applied password policy.
The issue is solved. -
Revision: 16810
Revision: 16810
Author: [email protected]
Date: 2010-07-03 03:32:49 -0700 (Sat, 03 Jul 2010)
Log Message:
Changed close event from flash.events.Event.CLOSE to mx.events.CloseEvent.CLOSE. See MXML examples in PopupTest.
Modified Paths:
cairngorm3/trunk/libraries/PopupTest/src/samples/ModulePopups.mxmlHmmm Strange!!!
Seems like a bug which requires target for parallel effect while hide only but does not set it.
For the time being you can remove the sequence effect as there is no othe effect other than parallel and use effect like
<mx:Parallel id="fadeOutTw">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
or you can also set target explicitly like :
<mx:Sequence id="fadeOutTW" >
<mx:Parallel target="{largeImgTW}">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
</mx:Sequence>
I have tested on this code, and works fine. Hope this helps you
-Vikash -
Revision: 16809
Revision: 16809
Author: [email protected]
Date: 2010-07-03 03:05:21 -0700 (Sat, 03 Jul 2010)
Log Message:
Changed close event from flash.events.Event.CLOSE to mx.events.CloseEvent.CLOSE. See MXML examples in PopupTest.
Modified Paths:
cairngorm3/trunk/libraries/PopupTest/.actionScriptPropertiesHmmm Strange!!!
Seems like a bug which requires target for parallel effect while hide only but does not set it.
For the time being you can remove the sequence effect as there is no othe effect other than parallel and use effect like
<mx:Parallel id="fadeOutTw">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
or you can also set target explicitly like :
<mx:Sequence id="fadeOutTW" >
<mx:Parallel target="{largeImgTW}">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
</mx:Sequence>
I have tested on this code, and works fine. Hope this helps you
-Vikash -
Revision: 16808
Revision: 16808
Author: [email protected]
Date: 2010-07-03 03:04:40 -0700 (Sat, 03 Jul 2010)
Log Message:
Changed close event from flash.events.Event.CLOSE to mx.events.CloseEvent.CLOSE. See MXML examples in PopupTest.
Modified Paths:
cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpBase.as
cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties
cairngorm3/trunk/libraries/PopupTest/.flexProperties
cairngorm3/trunk/libraries/PopupTest/src/PopUpMXMLExample.mxml
cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopup.mxml
cairngorm3/trunk/libraries/PopupTest/src/samples/ZoomAndFadePopUpBehavior.mxml
cairngorm3/trunk/libraries/PopupTest/src/samples/parsley/ParsleyPopup.mxml
Added Paths:
cairngorm3/trunk/libraries/PopupTest/src/samples/ModulePopups.mxmlHmmm Strange!!!
Seems like a bug which requires target for parallel effect while hide only but does not set it.
For the time being you can remove the sequence effect as there is no othe effect other than parallel and use effect like
<mx:Parallel id="fadeOutTw">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
or you can also set target explicitly like :
<mx:Sequence id="fadeOutTW" >
<mx:Parallel target="{largeImgTW}">
<mx:Fade alphaFrom="1.0" alphaTo="0.0" duration="1000"/>
<mx:WipeUp duration="1000" />
</mx:Parallel>
</mx:Sequence>
I have tested on this code, and works fine. Hope this helps you
-Vikash -
Revision: 14474
Revision: 14474
Author: [email protected]
Date: 2010-02-28 23:53:31 -0800 (Sun, 28 Feb 2010)
Log Message:
Adding a 'dispatchInitialChangeEvent' parameter to the 'watch' method in order to allow the initial change event from being dispatched, continued.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/metadata/MetadataWatcher.as*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
-- click on New icon
-- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
-- etc. -
Revision: 14473
Revision: 14473
Author: [email protected]
Date: 2010-02-28 23:45:28 -0800 (Sun, 28 Feb 2010)
Log Message:
Adding a 'dispatchInitialChangeEvent' parameter to the 'watch' method in order to allow the initial change event from being dispatched.
Modified Paths:
osmf/trunk/framework/OSMF/org/osmf/metadata/MetadataWatcher.asPerhaps you're not handling the "EndOfStreamEvent" correctly/at all, and thus not freeing up the socket to listen for the "NewReceiveStreamEvent " after the initial stream has ended...
? -
Dragging invitees from Directory to iCal event
I have OS X 10.5 installed and iCal server running. On my iCal 3.0 clients I can create an event and drag an individual from either AB or Directory to the attendees box in the event I am editing.
However, I am unable to drag the same individual from the "Directory" category in AB into the attendees box, neither am I able to drag groups from Directory or AB to the attendees box of the event. I always get the "green light" and it looks like it going to work, it does not complain or report any errors, it just doesn't do anything.
Any suggestions welcome.Hi
A. DO NOT - Move or alter anything in any folder named - iMovie Projects or iMovie Events on DeskTop/Finder AT ALL - Moving Events and Projects MUST BE DONE within the iMovie Application ! Else connections will break and this can be anything from hard to impossibly to repair.
B. The external hard disk to harbor iMovie Projects and Events
• MUST BE - Mac OS Extended (hfs) formatted - UNIX/DOS/FAT32/Mac OS Exchange will work for most BUT NOT FOR VIDEO - AT ALL !
• Should be a FireWire one - as USB/USB2 performs badly to me
In iMovie - this external hard disk can be seen in Event resp. Project window and here You can move a project from one to the other and when asked let it move Events over too. This can be very good as the space needed , freed-up is mainly in Events as Project do not hold a copy of Your movie but just a text document on howto the material in Events are supposed to be played = Non-Destructive editing.
Yours Bengt W -
Change View to list event from New to Old
In the iPhoto app it was possible to view your events from 'newest to oldest'. However in the new Photo app my events are listing old to new which means I have to scroll down to get to the latest event and I can't find a way to reverse the order (the only other option seems to be by event name). Can anyone find a way to view the events with the newest event at the top?
Tell Apple what additional features you want in Photos via both http://www.apple.com/feedback/iphoto.html and http://www.apple.com/feedback/macosx.html since they don't have a feedback page for Photos as yet.
-
Recieve hardware change events from kernel
is it possible to receive events from the kernel pertaining to hardware. For example would it be possible to get a notification whenever the power button is pressed etc etc
ps Ignore the "etc etc" I just added that for good measure, I'm mainly concerned with the power buttonhttp://developer.apple.com/mac/library/documentation/DeviceDrivers/Conceptual/IO KitFundamentals/PowerMgmt/PowerMgmt.html#//apple_ref/doc/uid/TP0000020-SW4
-
Email Most Recent File From Directory
I am using C# to open a Spreadsheet, change 3 things in the spreadsheet, then save the spreadsheet in a directory, then open the directory. I was trying to use FileSystemWatcher to capture the most recent file in the directory, but it seems that the
Watch() event is being triggered before my syntax is able to make the changes and save.
Is their a better method for this or do I just need to add in a Thread.Sleep() event so that the Watch() event triggers after the save is complete?Hi Indigo,
>>I was trying to use FileSystemWatcher to capture the most recent file in the directory,
but it seems that the Watch() event is being triggered before my syntax is able to make the changes and save.
I have tested your code on my side, I supposed that you can add one button, when you
change and save xls file successfully, try to trigger Watch() event by manual.
I changed a little code with yours.
Watch for changes in LastAccess and LastWrite times, and the renaming of files or directories.
Add all event handlers.
Use messageBox to show something instead
Here is my test reslut:
Do I miss something? If so, please feel free to post here.
public partial class Form1 : Form
public Form1()
InitializeComponent();
filewatcher();
private void filewatcher()
using (Process pRun = new Process())
pRun.StartInfo.FileName = "D:\\Test\\test.xlsx";
pRun.StartInfo.UseShellExecute = true;
pRun.Start();
string openPath = "D:\\Test\\";
Process pRC = new Process();
pRC.StartInfo.FileName = openPath;
pRC.Start();
private void Watch()
FileSystemWatcher watcher = new FileSystemWatcher();
watcher.Path = "D:\\Test";
watcher.NotifyFilter = NotifyFilters.LastAccess | NotifyFilters.LastWrite
| NotifyFilters.FileName | NotifyFilters.DirectoryName;
watcher.Filter = "*.xlsx";
// Add event handlers.
watcher.Changed += new FileSystemEventHandler(OnChanged);
watcher.Created += new FileSystemEventHandler(OnChanged);
watcher.Deleted += new FileSystemEventHandler(OnChanged);
watcher.EnableRaisingEvents = true;
private void OnChanged(object source, FileSystemEventArgs e)
WatcherChangeTypes changeTypes = e.ChangeType;
String filename = e.Name.ToString();
MessageBox.Show("Hello");
private void button1_Click(object sender, EventArgs e)
Watch();
MessageBox.Show("DOne");
//private void sendMail(string filename)
// using (MailMessage mail = new MailMessage())
// mail.From = new MailAddress("");
// mail.To.Add("");
// string fileDirectory = path;
// string fileFullPath = Path.Combine(filesDirectory, filename);
// if (!File.Exists(fileFullPath))
// return;
// using (var xlsx1 = new Attachment(fileFullPath))
// mail.Subject = "Test";
// mail.Attachments.Add(xlsx1);
// SmtpClient client = new SmtpClient("SMTP.MAIL.COM");
// client.Send(mail);
Best Regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The added events in iCal could be dragged freely to reminder before I used iCloud, but now it doesn't work. The situation of iCal is: 1) I can not drag any event from calander to reminder, 2) the 'paste' bottom in reminder is disabled, and 3) sortord in reminder does not work, i.e. I can not change order even if I select 'manual' .
Anyone met these situation before? Please help~The added events in iCal could be dragged freely to reminder before I used iCloud, but now it doesn't work. The situation of iCal is: 1) I can not drag any event from calander to reminder, 2) the 'paste' bottom in reminder is disabled, and 3) sortord in reminder does not work, i.e. I can not change order even if I select 'manual' .
Anyone met these situation before? Please help~ -
I have 2 calendars set up for my work schedule, a "night shift" and "day shift" calendar. I've set up repeating events fro Fri/Sat/Sun 3-11pm "night shifts" and Mon/Tues 7am-3pm "day shifts". But lets say for example that I swap shifts and instead of working nights on Saturday like I normally would, I am now working days. I want to change that in my calendar. When I go to change the event, if i change the TIME it asks if i want to change all event or ONLY this event. no problem....just this single event. but when i go to change the event from the "night shift" calendar to the "day shift" calendar, it changes ALL the repeating events, and not just that one single event. can anyone help with this??? am i doing something wrong? is there a way to do this or not with the new iCal program??? i used to do this and never had any problems. Thank you!
You need to follow iPhoto terms since we only know what you tell us
what are you calling folders - in iPhoto folders can not hold photos - albums hold photos and folders hold albums or other folders
The basic default view of photo is by event (iPhoto '08 and later)
Exactly what you you trying to do?
LN -
Can I move an iCal event from my phone to another calendar?
Every once in a while I add an event and forget to change the calendar from the default "On this phone" to one of the other 3 calendars I set up. After I save an event, the option as to which calendar it's added to disappears and I can no longer change it on my phone. In lieu of that not being possible, I can only think of inputting the event again and deleting the "on my phone" event. Ideas?
I reset my default calendar to one that syncs with my MacBook and MobileMe. Now if I put a calendar event on the phone memory I have to do it intentionally. No solution on how to move an event from the phone but this is a workaround.
Maybe you are looking for
-
Manipulation to reset an iPod Shuffle earlier models
Hello everybody, I've a problem with my ipod, It will no longer charge and no longer connects to itunes I'm sorry for my english Thank you, for your help
-
Using Team Foundation Server 2013 for Embedded windows application development
Can I use Team Foundation Server 2013 to develop an application for an Embedded Board with WEC7 or WEC2013? Does it have all the features of the ultimate edition? For example, can I debug the application when it is running on the embedded board?
-
[Rookie] Some clarification on Dimension Table
Hi! I am preparing for BW certification, and sorry to post this very basic query. On certification notes, I came accross a statement that says - "Dimension table contains link to fact table and SID table". I think this statement is wrong. Dimension t
-
Wipe Disk, install new OS, import some items from Time Mach.
I read in another thread to use disk utility to zero my hard disk in the following manner: Creat another Admin User Use "erase" function to delete the space where my curretn user lives This is the best way to rid one self of legacy root junk that may
-
Help with dropdown menu in JCombo box,Pleaseeeeeee
Hi, I posted earlier but I`II try again. Someone must know how to do this. I have a JComboBox and I want the drop down menu to be a bit wider then the comboBox. I tried using this method public void setPreferredSize() Dimension d = jcbo.get