Event ID 1 Error Microsoft-Windows-UAC Microsoft-Windows-UAC/Operational

This error pops upon every restart of Windows Server 2012.
Event ID 1 Error Microsoft-Windows-UAC Microsoft-Windows-UAC/Operational
The process failed to handle ERROR_ELEVATION_REQUIRED during the creation of a child process.
Event Viewer traces user to S-1-5-18 SYSTEM, Execution ProcessID in Task Manager corresponds to SVCHOST.EXE.
SYSTEM is the owner of SVCHOST.EXE, even having granted SYSTEM permission Full Control does not fix the error.
Any help will be appreciated.

@Dharmesh, thanks for your advice.
The specific SVCHOST process causing the error runs these services :
 - Application Experience
 - Application Information
 - Certificate Propagation
 - Group Policy Client
 - IKE and AuthIP IPsec Keying Modules
 - IP Helper
 - Multimedia Class Scheduler
 - Remote Access Connection Manager
 - Remote Desktop Configuration
 - Routing and Remote Access
 - Server
 - Shell Hardware Detection
 - System Event Notification Service
 - Task Scheduler
 - Themes
 - User Profile Service
 - Windows Management Instructmentation
 - Windows Update
I doubted if any of those would actually need the ElevateCreateProcess fix.
However, I gave it a try, applying the compatibility fixes at Server 2003 and Vista SP2 levels; yet the error was not corrected.
So, combing through those services seemed unavoidable. Eventually, the culprit was identified.
For the benefits of people encountering the same issue, this may help save some clueless efforts.
Somehow, Windows Server setup a RaMgmtUIRestartTask in Task Scheduler, to run ramgmtui.exe as Administrators at log on of any user; but, not granting it the necessary permission. It is supposed to start the Remote Access Management console, failing which
it logs the Event ID 1 Error, and gives little hint on the whereabouts of the cause.
To stop the error, one would simply locate the scheduled task, then have it disabled, or check the option to grant it the highest privilege.

Similar Messages

  • A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred

    Hi
    i am getting these errors in sharepoint server event viewer, and when i see the sql server the log files disk is full memory only some mbs left out of 1 TB
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-SharePoint Server Search
    Date:          7/12/2014 9:56:04 PM
    Event ID:      57
    Task Category: Search service
    Level:         Warning
    Keywords:     
    User:          XYZ\svc-mc-sps3eServsear
    Computer:      SPFIND01.xyz.gov.local
    Description:
    A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred 1 time(s) Description: Transaction (Process ID 193) was deadlocked on lock
    resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
    Context: Application 'XYZSP_SearchApp'
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-SharePoint Server Search" Guid="{C8263AFE-83A5-448C-878C-1E5F5D1C4252}" />
        <EventID>57</EventID>
        <Version>14</Version>
        <Level>3</Level>
        <Task>136</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2014-07-12T18:56:04.665684900Z" />
        <EventRecordID>225666</EventRecordID>
        <Correlation />
        <Execution ProcessID="3408" ThreadID="2932" />
        <Channel>Application</Channel>
        <Computer>SPFIND01.xyz.gov.local</Computer>
        <Security UserID="S-1-5-21-1537596049-1164153464-4201862467-47315" />
      </System>
      <EventData>
        <Data Name="string0">Microsoft SQL Server Native Client 10.0</Data>
        <Data Name="string1">1205</Data>
        <Data Name="string2">1</Data>
        <Data Name="string3">Transaction (Process ID 193) was deadlocked on lock resources with another process and has been chosen as the deadlock
    victim. Rerun the transaction.</Data>
        <Data Name="string4">
    Context: Application 'XYZSP_SearchApp'</Data>
      </EventData>
    </Event>
    A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 9002 occurred 1 time(s) Description: The transaction log for database 'tempdb' is full due to 'ACTIVE_TRANSACTION'.
    Context: Application 'XYZSP_SearchApp'
    adil

    If you've run out of disk space for your SQL databases then of course you'll get errors. Fix SQL then look to see if you're still getting errors.

  • SSRS 2012 SP2 - Windows 2008R2 - Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: A generic error occurred in GDI+

    Hi,
    I have built new SQL 2012 SSRS SP2 with Windows 2008R2 and BAR reports are not showing (just "x" mark in the left corner).
    Following is the log file information. I have gone through other forums and all are with windows 8 or windows 2012. Your help is much appreciated.
    library!ReportServer_0-15!d7c!08/13/2014-10:52:17:: i INFO: RenderForNewSession('/ProductionReporting/PlantProduction')
    reportrendering!ReportServer_0-15!d7c!08/13/2014-10:52:18:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: , Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: A generic error occurred
    in GDI+. ---> System.Runtime.InteropServices.ExternalException: A generic error occurred in GDI+.
       at System.Drawing.Image.Save(Stream stream, ImageCodecInfo encoder, EncoderParameters encoderParams)
       at Microsoft.Reporting.Chart.WebForms.Chart.Save(Stream imageStream, ChartImageFormat format)
       at Microsoft.ReportingServices.OnDemandReportRendering.ChartMapper.GetImage(ImageType imageType)
       --- End of inner exception stack trace ---;
    Thanks,
    Vel
    Vel Thavasi

    Hi Vel,
    According to the error message, the issue is related to GDI+. Based on my research, it is a known issue that the GDI+ need to be updated on Windows Server 2008 R2. If we want to know what version of GDI+, we can do a file search for Gdiplus.dll.
    To fix this issue, please install the hotfix for your Windows Server 2008 R2 from the following kb:
    http://support.microsoft.com/kb/2495074
    There following thread about the similar issue is for your reference:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/50c071db-b4fc-4a2e-a9f4-e10e833c97d2/report-not-rendering-charts-in-pdf-a-generic-error-occurred-in-gdi?forum=sqlreportingservices
    If there are any other questions, please let me know freely.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Microsoft releases fix for Windows Update corruption errors

    See ZDnet article Microsoft releases fix for Windows Update corruption errors found @
    http://www.zdnet.com/microsoft-releases-fix-for-windows-update-corruption-errors-7000026582/
    The Microsoft KB article is found @
    http://support.microsoft.com/kb/947821
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

    Hi Rick,
    Really thanks for your sharing.
    This will definitly help others in this forum.
    Kate Li
    TechNet Community Support

  • Problems installing Itunes error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel

    Can anyone help? I have been trying to install the new version of Itunes for ages my new iphone wont activate on the old version!! Keep getting the same error message -  Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel.
    Please Help!!!!!

    That particular key can sometimes be hit by malware, liam, so just to be on the safe side I think we should try a malware scan first.
    Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
    http://www.malwarebytes.org/mbam.php
    Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look

  • Launching VB6 Editor after installing Visual Studio 2013 results in "Please wait while Windows configures Microsoft Visual Studio..."

    I have had various versions of Visual Studio installed beside Visual Basic 6.0 Enterprise for some time with no problems, most recently Visual Studio 2012 Premium.
    I recently installed Visual Studio 2013 Premium, and now every time I open VB6 I get a dialog that says "Please wait while Windows configures Microsoft Visual Studio Professional 2013" that shows a progress bar. After it finishes (30 seconds or
    so), it launches again and again and finally VB6 will open. This happens with each instance of VB6, regardless if I've already done it once and never run VS2013 in between.
    If I cancel the dialog, I get this error message in a dialog: "Error 1712. One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible." Several more "Please wait"...
    dialogs will appear and if I continue to cancel, eventually I'll get the VB6 editor. It appear to work fine despite the error messages.
    It seems to me that the VS2013 installer flagged some dll's or other files to be rolled back whenever starting VB6. It doesn't appear to be necessary, and I'd like to avoid playing the "Please wait" wack-a-cancel-button game before launching each
    instance of VB6 (or waiting several minutes for no reason). So how do I fix this?
    Note: I've seen something similar happen in Outlook on a different PC when upgrading from 2010 to 2013. The same sort of "Please wait"... dialog would appear each time I opened Outlook. Judging by the "similar" questions that popped up when
    entering this forum post, I'd say this is a general problem with upgrading older versions or installing newer versions of major Microsoft software side-by-side.
    /* Don Reynolds */

    I found the answer!
    I was having the exact same issue, and I was search for a solution and I happened across the following thread: http://social.msdn.microsoft.com/Forums/en-US/f4b0fd38-f4f9-41ea-bd8d-834203a175d2/building-visual-studio-2010-project-triggers-please-wait-while-windows-configures-visual-studio?forum=vssetup&prof=required
    Scroll a small bit down, and there is a post by Barry Wang explaining that you need to use event viewer to find out what is missing. Anyway, I opened event viewer, then open VS 6, then hit refresh in the event viewer (under Windows Logs -> Application)
    and saw a warning message from MsiInstaller. It gave me the following message:
    Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'Visual_Studio_Professional_x86_enu', component '{E3FF99AA-78B9-4A06-8A74-869E9F65E1FE}' failed.  The resource 'C:\WINDOWS\Microsoft.NET\Framework\URTInstallPath_GAC\' does
    not exist.
    I opened an elevated command prompt, I navigated to the C:\WINDOWS\Microsoft.NET\Framework folder and verified that 'URTInstallPath_GAC' didn't exist, and then I did "md URTInstallPath_GAC".
    Closed and reopened VS 6, and it instantly opened - no "Please wait" message.
    Now this may or may not be the same problem you are having (problem is - I have had it happen on two separate computers now with VS 6 and VS 2013 installed), but it should point you in the right direction. In fact, you should be able to use the Event Viewer
    for anytime the "Please wait" message shows up for any application, and then once there find out what is really missing.

  • Error - "Can not find Microsoft Word installed.."

    Hi,
    I downloaded RH6 demo to test it, but can't generate a
    printed documentation.
    When I try, I only get an error message
    "Can not find Microsoft Word installed on your system"
    I have no idea why this happens. First, in the layout
    settings I have set .pdf to be produced - DOC option is not
    checked.
    Also, MS Word is installed (Office 2003), and in Tools /
    Options / HTML Editors Word 2003 is listed, with a correct path to
    Winword.exe (which I reselected, just in case) .
    This happens on Windows Vista Ultimate edition, UAC off.
    Other layouts are generated normally.
    Any idea how to fix it?
    Thanks

    RH6 is not supported under Vista.
    I cover this in the article I wrote for Adobe's DevNet pages.
    http://www.adobe.com/devnet/robohelp/articles/get_started.html
    It is also covered in the Getting Started Guide that ships
    with the product. A soft copy can be found at
    http://www.adobe.com/support/robohelp/documentation.html
    See also Snippets on my site where there is a reference to a
    forum post about running RH6 under Vista.
    When you installed RH6 did it find Word on your system then?
    Did you install using your logon with admin rights attached?

  • Detailed walkthrough of Installing Microsoft Windows 7 or Windows 8 on your Mac

    This is for anyone wanting the step by step instructions for installing Microsoft Windows 7 or 8 on their Mac. I have the Mid 2010 model iMac with the bluetooth keyboard and touch gesture mouse. If you have similar or just want to know how to do it step by step, please watch my tutorial. Hope it helps.
    http://youtu.be/rTPoyElIgZg

    My guess, you have not seen the threads and posts about Windows 8 on here before posting.There are no stuck threads and people tend to not look or when they do not find threads that are helpful (try search and "month" means "Aug" not the last 30 days and it is harder now to do searches than it use to be or than just using Google!
    Common issues? Trouble just downloading drivers. Burning ISO. Using external USB-DVD or flash installer drive. Lack of internet access!! audio, graphic drivers, graphic switching between Intel and ATI.
    Someone wrote a nice guide "How to install Windows on Mac Using Boot Camp" o weeks ago, it was nice, but I CANNOT find it again (I should have bookmarked it and put the link in the quick reference cheat sheet. They seemed to not be aware of the help on the Boot Camp Support page.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    Boot Camp 4.0, OS X Lion: Frequently asked question
    http://support.apple.com/kb/HT4818
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
    http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf 
    create a Windows support software (drivers) CD or USB storage media
    http://support.apple.com/kb/HT4407
    Boot Camp Assistant can burn Windows software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.  https://support.apple.com/kb/HT4569
    Installation Guide Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    http://www.apple.com/support/bootcamp/
    when trying to launch the "Boot Camp Control Panel", but I just stumpled upon a solution.
    I created a new Windows user, that was not Administrator. When I logged in Boot Camp updateded something and asked me to restart the computer.
    After restarting and logging in with my new user, I could start the "Boot Camp Control Panel" configure tap to click and use F1-F12 as function keys.
    Then I changed the new account to Administrator and now the control panel can not be startet again... but my settings remained... only on the new user only though.
    ============ 
    I had problems with windows 7 after the installation using boot camp. The GT 650M was not showing up as the graphics adapter. I fixed the problem by inserting my windows support software CD a second time. I did not let it use auto run.  I went into the Windows 7 directory and then into the Nvidia directory and ran setup.exe. This installed the Nvidia drivers for me. If this works correctly, you will have an Nvidia control panel available to you. I set the resolution to 2880x1800. I also set windows to 200% magnification.
    I think what happens is that after you install windows, and then run the windows support CD, the main boot camp setup script seems to stop on the nvidia driver install--everything else installed correctly.
    The 2012 MacBook Air suffers from an EFI firmware bug that under Windows blocks turbo mode.
    Disable Windows 8’s Adaptive Brightness to Fix Dark Screen Problems
    2012 MacBook Air plagued by audio noise with Apple's Thunderbolt display
    Intel Windows 8 Graphic Driverhttp://www.guru3d.com/news/intel-whql-graphics-driver-windows-8-download/
    http://www.zdnet.com/blog/hardware/windows-8-an-installation-walk-through/14768
    http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdri ve-with-virtualbox/
    I did manage to make the trackpad work. You need to install trackpad++
    (http://www.techspot.com/downloads/4967-trackpad-control-module.html), it will enable the trackpad driver on boot camp. After you install the trackpad++, trackpad++ will complain something. ingnore it.  You should be able to enable trackpad. And you can now even uninstall the  trackpad++, the trackpad will sill work. 
    brightness, what graphics card are you using? It might be due to the auto adjusting brightness running there. You can go to your power options, edit the one you are using  (Change plan settings >> Change advanced power settings) and look for Batteries >> Enable adaptive brightness and disable the one you are using. After that, the scrollbar for adjusting brightness in power options should work again.
    HDMI audio in Windows 7 64 bit 
    reinstalled the Intel video drivers and audio worked immediately.
    My config:  2011 Mac Mini 2.3, Intel 3000HD video
           .   .       upgrade to 8GB ram
    Samsung 8000 series LED TV connected with HDMI
    Memorex external BluRay writer(USB only power)
    For Windows 7 install, I tried installing with the 64 bit DVD but this failed as documented elsewhere.
    Instead, setup with USB drive, follow instructions available in bootcamp
    After partitioning drive with boot camp and reboot, install Windows 7 with install wizard.
    When asked whether to allow automatic updates say 'no', then complete installation and run boot camp tools for Windows.
    Because the network driver gets installed prior to the Intel video driver, Windows will install the Windows Update Intel video driver which breaks HDMI audio.
    When auto updates are off, the Intel video driver that is correct gets installed last.  HDMI audio works with this driver.
    Apple should install the Intel video driver first and it would solve this problem.
    I now have full blown 3D BluRay support on the MacMini with TruHD audio, fantastic!
    https://discussions.apple.com/thread/3408749
    Boot Camp: FireWire devices may affect Windows 7 responsiveness if connected to an Apple Thunderbolt display
    http://support.apple.com/kb/TS4190Products Affected
    Apple Thunderbolt Display (27-inch), Boot Camp, Windows 7
    Symptoms -
    When using Boot Camp and Microsoft Windows 7, FireWire (IEEE 1394) devices may affect system responsiveness if they are connected to the FireWire port of an Apple Thunderbolt display.
    MacBook Pro audio sound fixhttp://realitypod.com/2010/07/macbook-pro-no-sound-in-windows-7-final-fix/
    bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
    https://discussions.apple.com/thread/4079148
    After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp. Hopefully this will help others:
    The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly. My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
    Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties".
    Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
    I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one.
    As soon as I enabled the Windows Wireless Service, the problem came back.
    Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem.
    This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer.
    So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
    All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
    Wireless Connection problem using windows in a Mac.
    Re: Connection problem using windows in a Mac. 
    May 4, 2012 10:08 PM (in response to Chris9393)
    Windows 8 to manage your mobile broadband use for you
    By Peter Bright
    Windows 8 will contain built-in support for mobile broadband devices and smarter use of metered Internet connections, as detailed in the lastest post on Microsoft's Building Windows 8 blog.
    Most 3G mobile broadband connections are subject to usage limits, and keeping track of data usage at the moment normally means running an application from the mobile operator, or even checking on their website. Windows 8 will have its own usage counters so that users can keep track of how much data they've burned through over the current billing cycle.
    Windows 8's faster Wi-Fi connectivity, with hot spots being found and connected to in under a second, and its new support for Wi-Fi hotspots that use authentication portals. Instead of having to open a browser to enter a username and password, it will be possible to type credentials directly into Windows itself.
    How to view error message:
    From Control Panel-> Admin. Tools-> Event Viewer-> Windows logs:
    Check Application and System Folders for Red highlit messages. Note that you can right-click clear these log folders.
    Memtest
    This is a step by step guide with audio and video to explain how to use memtest to see if your memory is defect:
    Another thing to add is that some errors will not be found on the first pass, best to do at least 3 passes.
    http://www2.corsair.com/training/how_to_memtest/
    Memory that "seems" to work in OS X (Lion, ML and earlier) but fails and does show errors with Windows and shows up in memtest - so don't trust your RAM just because it seems okay.

  • Forms Authentication Error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed

    I created a custom security extension following the steps listed in the Readme_Security Extension Sample. It works fine if I login as the user that is specified AdminConfiguration section of the rsreportserver.config file but if I
    log in as another user, I get this error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.  I've added the user to both System Administrator
    and System User roles to try to get it to work but still no luck.
    Does anyone know how to fix this?
    Thanks.

    Hi MetronM,
    The issue is due to that user have no permission to access the report server. In report manager, Reporting Services includes predefined roles that we can assign to users and groups to provide immediate access to a report server. Each role defines a collection
    of related tasks.
    You can refer to the following steps to assign corresponding role to the user.
    Open report manager.
    Click “Folder Setting” button. 
    Click “New Role Assignment” icon.
    Type the user name and select the corresponding role.
    There is an article about Granting Permissions on a Native Mode Report Server, you can refer to it.
    http://technet.microsoft.com/en-us/library/ms156014.aspx
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Microsoft - Worst Customer Support ever! Where can I get a decent Microsoft customer support for Windows in the UK?

    I have just tried to created the ISO of the operating system I am using for last 5 years, Windows 7 Ultimate.  I remembered that on Microsoft website are quick links dedicated exactly for that purpose. However, when page loaded I've seen this: 
    The Page or File You Requested Could Not Be Provided
    The resource you are looking for has been removed, had its name changed, or is temporarily unavailable. 
    HTTP Error 404 - File or directory not found. 
    If you purchased your Microsoft Windows software from another source, but have the software key provided by Microsoft, you can download the Windows operating
    system from the following website:
    Windows Downloads
    When I have clicked on the download link it took me to the webpage which seemed everything going for it.  3-step guide, including  the product code and language. Brilliant! I thought, until after filling all the details I have clicked on 'Next-Verify
    Product Key' than I faced a message:
    Validating your product key. This may take several minutes. Do not refresh the page or select back, doing so will cancel
    the request.
     When finished, a message pop up:  that the language provided is not compatible with the product key - try different language. Interesting, I am using this product last five years but is not compatible with English? I must have been a fairy then
    to be able to make it work for all these years. Then it got better.
    I have tried it again with a different message in the end: 
    System Error
    We encountered a problem with the product key you provided.  Please visit the  Microsoft Support Contact Us page
    for assistance.  Refer to Message Code 715-123130.
    So I have contacted Microsoft.  Contacting Microsoft is an experience itself and half.
    Being Microsoft certified, I used the link provided for IT Pros. I click the link provided and the page started loading..... and still loading now....
    So I have decided to call the customer support as you would normally do with any other organisation. To actually get to the phone number, illogically placed, took me a few loops around MS website. Once called, I got to speak to very efficient lady on reception
    who kindly switched me to the Technical Support. That's going well, I thought.
    Once the connection has been made, I felt that MS technical support is based in submarine 3 miles under water in Japanese sea. All I could hear was the very familiar sound of water of modern Voice over IP connection dated back in 2003 and a male voice (but
    by the sound of it it might have been a whale) asking me my name. Unsurprisingly, the connection was interrupted several times when I tried to describe my issue I am having, and eventually I was disconnected. 
    Still not put off, I made another attempt to contact MS customer service. This time I have been talking to a woman, seemed a little bit closer, maybe Bristol waters? Still in the submarine but not so deep. Also here I was asked my name AND surname; then
    I have described my intentions and the difficulty I am having in succeeding it. The woman on the phone didn't get at all what I was saying. I had to literally spat out word by word what the problem is. (Luckily, I have many years of experience supporting IT
    users over 60 years of age so it didn't take so long to explain it to her.) My thought just was, oh my God, how can she help if she didn't even understand the issue. Then the phone went completely dead for 10 mins. When it came back to life, I could hear clear
    sound of fishing boat passing by until a voice, I assume the same woman, apologised for the delay. And now - the best is coming:
    1) I was informed that the website is being tested, under construction and that doesn't work properly.
    Comment: How can Microsoft, one of
    leading organisation in  technology, do testing of website 'live'? Quite clearly, that is BS.
    2) I was advised to obtain the ISO image from 3rd Party website!!!! On question if she can give me the link to any 3rd party website the answer was NO.
    Comment: Seriously, so here we are in 21st Century, dealing with almost the GOD in IT and the recommended solution is - to obtain help for the God's product from UNKNOWN 3rd Party. Brilliant! If this is the case, where Microsoft is exactly heading to???
    3) She cannot tell me when the issue of non-working website will be sorted and I should go and buy the copy of Windows; than I will be able to do the ISO.
    Comment: Well, that's what I call a professional advise from Microsoft representative. The fact that I do have the physical copy was totally ignored, the fact that I have been running the system for several years have been totally ignored the whole point
    of this exercise (to cut down the time making ISO using Microsoft website) was totally ignored. 
    When I started asking questions to clarify what has been said I have been continuously interrupted. 
    To my question whether MS customer service representative have been trained to interrupt customers I have been told that I am talking over her. I asked her name, which she told me but I didn't catch and therefore I have asked if she could spell it. On that
    point she hung up.
    Well done Microsoft! And now I want to know just one reason why I should buy your products when the support, in case of problems, is not existent.
    Does anyone know where I can get a decent customer service that can resolve my issue better than smudge it ?
    Thank you.
    Lenka Novakova
    Microsoft Certified IT Professional Enterprise Administrator
    Microsoft Certified Solutions Associate

    Just having the same issue there, which is real not fun, I have not tried to contact them, but looking at  your experience I am not sure if I should.
    My key comes from the back of a laptop o so I guess that would be a W7
    OEM, and that could explain why you can't download a ISO from their website, would that also your case ?
    Also could it be because we are attempting to get the ISO after the product became EOL ?
    http://windows.microsoft.com/en-us/windows/lifecycle
    Maybe I will give a go with the customer care people and maybe I will get a right answer ;)
    Will keep you posted

  • "An error occurred accessing your Microsoft SharePoint Foundation site files" connecting site with SharePoint Designer

    I have a SharePoint 2013 environment with 1 AD Server, 1 DB Server and 1 APP Server, with 13 Web Applications running under the SharePoint.
    Recently I rebuilted the application because of some infrasctrucutre problems, and I was able to solve all of them, except one. I can't connect to any of those 13 Web Apps with SharePoint Designer. When I try to connect, it always ask credentials, then it
    seems like loading the site, then the error appears:
    "An error occurred accessing your Microsoft SharePoint Foundation site files. Authors - if you are authoring against
    a Web server, please contact the Webmaster for this server's Web site. WebMasters - please see the server's application event log for more details."
    I've spent hours troubleshooting it, but none of the information I found was valid. I've already tried to clean the cache, but didn't work. I found plenty of related data of this
    error with FrontPage and old versions of SharePoint, but nothing helped. All the Web Apps are SPD-Enabled at Site Collection Administration. I've tried connecting from many different PC's. The 15/LOGS folder doesn't get any data from this error, neither the
    Event Viewer.
    I really don't know what else to do. Please Help!

    I found the answer of my issue was in a .NET Agent installed by NewRelic on the server. I found a connection trouble with Fiddler, then I end up figuring this out:
    This can be the result of Real User Monitoring so the first step in troubleshooting would be to disable it and see how it affects the application. The .Net Agent injects snippets of javascript into the header of pages sent to the users browser to measure the
    page load time on the user's end.
    You can disable RUM by editing newrelic.config and changing this line:
    <browserMonitoring autoInstrument="true"/>
    to this:
    <browserMonitoring autoInstrument="false"/>

  • Outlook 2013 error: The connection to Microsoft Exchange is unavailable

    Environment: Windows 7 Enterprise
    Setup: Fresh install of Office 2013
    Issue: When I launch Outlook I get the error:
    The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
    Steps to resolve:
    I made sure my server name and mail address were correct but this did not have an impact.
    I am at a total loss on how to resolve this issue, is there anyway to manually connect to M.E> as it is just saying the connection is unavailable.  All of the other threads dealing with this issue have been no help.  I can sign into my account
    at login.microsoftonline.net so i know the account is valid.  I also receive email to my iPhone with the account and server.  Any advice would be wonderful.
    Now when I start up the application it tells me the same error and brings up something to alter the server and connection address.   

    Hi,
    Have you tried to recreate a new mail profile and then test the issue?
    To do this, please exit Outlook, and then go to
    Control Panel >Mail... > Add…
    Details about create a new mail profile, see:
    http://support.microsoft.com/kb/829918/en-us
    Also, you can try with this KB:
    http://support.microsoft.com/kb/2264398
    This issue occurs when the
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders registry key does not contain all of the required data. Specifically, these problems occur if the
    AppData string value is missing from this registry key.
    To resolve this issue, import the
    User Shell Folders registry key from a working Windows User Profile.
    Hope this helps.
    Best Regards
    Steve Fan
    TechNet Community Support

  • System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).

    I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
    It then gives me an error log of ;
    2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
    2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
    2015-04-23 14:44:06Z: Info: Exitcode = 0
    2015-04-23 14:44:06Z: Info: Logging ended.
    I have installed this software succesfully on other machines previously.....

    Hi RyanWelsh78,
    This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
    Thanks for your understanding.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to Configure Microsoft loopback adapter in windows 2008

    Hi all,
    I am trying to install SAP IDES 6.0..... while i m trying to install it , it is asking forUnlimited Strength Jurisdiction Policy Files at runtime.
    I do have local and US policy jar file, but i guess its asking for JCE extension file, i dont know about it. so i m not able to proceed
    further. it gives osme error about local host. i think its about Microsoft loopback adapter. can anyone have idea abt it.How to
    Configure Microsoft loopback adapter in windows 2008?
    Can anyone help me ASAP coz i m stucked like anythng.
    thanks
    Cheers

    Hi vinay
    Thanks for reply...I m Installing SAP IDES...with DB2
    I have upload JCE zip file...after clicking next button i m getting following Errors,
    ERROR 2014-10-02 09:52:29
    MOS-01185  The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
    ERROR 2014-10-02 09:52:29
    FCO-00011  The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
    i guess its about Loopback adapter configuration. Still i m not sure... DO u have any idea about it.
    How i can get rid of it.
    Thanks

  • Please wait while windows configures microsoft visual studio professional 2013

    After installing visual community 2013 and rebooting visual studio works fine but all other microsoft office programs display "please wait while windows configures microsoft visual studio professional 2013" and continues the installation for
    about 1 minute before the program starts. I tried deleting mso.dll and reinstalling but it is still the same. Any help would be appreciated?

    Hi iwallhead,
    Then can your VS work fine? Anyway, please upload the installation log.
    Use a tool named collect.exe to collect the log file. Download
    collect.exeand
    run it directly. The utility creates a compressed cabinet of all the VS and .NET logs to
    %TEMP%\vslogs.cab. Please upload the
    vslogs.cab file on onedrive.
    I will help check if any install error exists.
    Best regards
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • Mail won't open after installing Lion 10.7.4

    Hi at all, I have just downgraded my Mac Book Pro - June 2010 from OS X 10.8 - DP3 12A206J to Lion OS X 10.7.4, as soon as I started checking everything's ok I found out Mail's not working anymore, with the following error showing up. "Mail cannot be

  • Wsdl file that is used in bpel (ejb web service)

    hi all, i have created a product table in the database and then i created an entity product class from the table, after that i created session bean and publish this session bean as a web service. During creating session bean --> i chose Business tier

  • Image size differences in libraries

    I just upgraded to iphoto 6.0.6 Now when I am looking at my pictures some are full screen and some are about the size of a playing card or letter envelope. Under general preferences I have selected "using full screen". This was not problem prior to t

  • Infotype Template

    Hi, I need template for infotype 0001,0002,0024,0025,1000,1001,1002. Please provide me any one so that I can prepare the rest. Point Assured.................. Please its Urgent.

  • Regarding modifer keys not working: stupid question

    Hi apple community! I have recently upgraded to snow leopard. My question is regarding this topic http://discussions.info.apple.com/message.jspa?messageID=10567379 Since it is locked, I cannot post it in there. So I will ask here, How in the world ca