Event id 142 , time service has stopped advertising bcz local is not synchronized

Dear
I have a forest of 16 domain controller in windows 2008 environment
One of my domain generating the warning Event ID 142
"time service has stopped advertising because local clock is not synchronized"
and after few seconds
it generate event ID 139,
time has started advertising as a time source , total 16 sec
plz guide me regarding this issue, how can i avoid such warning.
thanks
Wajahat

Hi,
The Event id 142 indicates that the local time clock is not synchronized with the time source. This indicates a communication issue with the time source provider.
Checkout the below link on Event id 142 and troubleshooting steps,
http://technet.microsoft.com/en-us/library/cc756500(v=ws.10).aspx
The Event id 139 indicates a normal condition.
Checkout the below link on Event id 139,
http://technet.microsoft.com/en-us/library/cc733179(v=ws.10).aspx
Checkout the below link on troubleshooting Windows Time Service for Windows Server,
http://msmvps.com/blogs/acefekay/archive/2009/09/18/configuring-the-windows-time-service-for-windows-server.aspx
Regards,
Gopi
JiJi
Technologies

Similar Messages

Apple mobile device service has stopped working - continues

Hi
I have a 16GB iPhone with 02 in the UK.
My first iPhone with 02 had trouble receiving calls with about 90% of incoming calls going straight to voice mail. I also couldn't backup that phone as every time I tried with iTunes, i got the message "Apple mobile device service has stopped working" about a minute into backup.
This happened continually, I re-installed iTunes so many times, still with little luck. I tried a different cable too. All on a brand new Dell Vostro desktop PC.
So, I took the phone back to 02 with these problems. 02 promptly replaced my iPhone.
Now, I have exactly the same problem. I obviously have nothing to restore on the iPhone as I was never able to back it up in the first place.
Every time I try and backup the iPhone I get the error "Apple mobile device service has stopped working". Again i tried a different cable and have removed and re-installed iTunes several times.
Anyone any ideas?
Regards
D

I was having this same problem with my new iPad 3G. It was driving me insane and preventing me from syncing the iPad.
I removed and re-installed all Apple components from my computer as recommended (in the recommended order). But, the problem persisted.
The error message looked just like the one posted above:
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
The SOLUTION came when i discovered that there were two copies of CoreFoundation.dll on my computer.
One was in C:\Program Files\Common Files\Apple\Apple Application Support.
The other was in C:\Program Files\Common Files\Apple\Mobile Device Support.
I removed the copy of CoreFoundation.dll from the Mobile Device Support folder, and the problem vanished.
I hope this helps.
-Steven.

Apple Mobile Device Service Has Stopped working

Okay, I'm running 32-bit windows vista Buisness service pack one, and am getting the following message whenever I open iTunes: Apple Mobile Device Service has stopped working and was closed. This is not an issue connecting my iPod, which still connects fine, the issue arrises when I try to sync my new iPhone, and it is not recognized. Windows does recognize my iPhone, as seen in device manager and the fact that the phone charges when connected. iTunes will fail to recognize it due to the aforementioned error in starting itunes. The error log looks like this:
Fault Bucket 1303677566, type 1
Event Name:APPCRASH
Response: None
Cab Id: 0
Problem Signature:
P1: AppleMobileDeviceService.exe
P2: 2.50.39.0
P3: 49f9b7cf
P4:StackHash_228c
P5:6.0.6001.18000
P6:4791a7a6
P7:c0000374
P8:000b015d
P9:
P10:
Attached Files:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERDFFE.tmp.ver sion.txt C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERDFFF.tmp.app compat.txt C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERE04E.tmp.hdm p C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERECEC.tmp.mdm p
These files may be availible here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0d8e0c5b
I have gone through the basic troubleshoot on apple doing the following:
restarting iphone

sorry, i maxed out space in the last post.
The steps I have taken to remedy the error are the following:
restart iPhone
restart computer
check usp ports
reinstall entire iTunes package(updater, iTunes, quicktime, apple mobile device support) several times
I have also tried:
-Running itunes as administrator, which I already am
-restarting the apple mobile device service in services
-checking for third party conflicts by having only itunes and the apple mobile device start when the computer starts and installing/running itunes with my anti-virus off.
-updating AMDS(apple mobile device service) with older versions of the software from 8.1 and 7.7
-deleting usbaal.sys from 8.2 and reinstalling 7.7 and 8.1 version
I have tried various other fixes found online, In addition to spending two hours on the phone with various apple "experts" who were baffled by my problem.
This problem is giving me the upmost frustration and I am becoming incredibly angry at both vista and iTunes. Please help
-Kyle
P.S. If you didn't catch it, i'm running the latest driver updates and the latest itunes, 8.2

MobileMe Services has stopped working

I recently updated iTunes and downloaded iCloud on my PC (with Vista 32-bit), since I use an iPhone and an iPad. Since then, each time I turn on Outlook 2003, a message comes on twice that says: "MobileMe Services has stopped working." I know many people have had this problem and some were able to address it by either repairing or removing MobileMe or re-installing iTunes. However, for some reason, when I go to Programs and Features, highlight iCloud or MobileMe Control Panel to uninstall, change, or repair them, the options "uninstall," "change," or "repair" do not appear. These options appear for other softwares but not for iCloud or MobileMe Control Panel. As a result, I am unable to do anything to these programs.
I also followed the suggestion to remove the "COM add-in" for iTunes in Outlook but noticed it was not even enabled. Nevertheless, I removed it completely; however, the problem persists. Outlook takes a few minutes to come on following the appearance of the same message twice. I also noticed (after the download) that iCloud does not support Outlook 2003. I would like to uninstall it but do not know how to do so. Any suggestion?

MobileMe was discontinued at the end of June 2012. The control panel should be removed if still present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
Alternatively the Microsoft Program Install and Uninstall Utility (AKA MS Installer "Fixit") may help remove the component completely.
tt2

I keep getting a popup that says"host process for window services has stopped"

hp s5220f
microsoft windows 7 home premium edeition (64 bit)
I keep getting a popup window that says "host process for window services has stopped"
How can I get rid of this?

Hello tribefanz,
Sounds like a compatiblity issue with a program and Windows 7. We need to find out what program is causing the issue though. We can do that through event viewer
1. Click the start orb
2. Select Control Panel
3. System and Security
4. Under Administrative Tools select the Event Viewer
In the event viewer you will want to drill down into the Application and System logs and look for anything with a Red X that says Error. Identify the program causing the problem and then we can go from there.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

When i Put my Ipod Touch 2nd gen in my computer it says Apple Mobile Device Service has stopped working and does not show up in itunes Help?

well yh Apple Mobile Device Service has stopped working and won't show up the error message keeps on poping up?
ipod touch 2nd gen
http://gyazo.com/57a6260ece61212ba210bfe5659e399b.png

Try this:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

HT3275 My Time Machine has stopped backing up and now it errors out everytime I make another attempt.

My Time Machine has stopped working and now errors out everytime I try to re-connect ?

What is the error.. ??
We cannot help much without details.
Look at the pondini troubleshooting.
http://pondini.org/TM/Troubleshooting.html
The vast majority of issues are C12 or C17.. especially with ML.. which rather than fixing issues left over from Lion exacerbated them.

My Time machine has stopped backing up saying there are some read only files.

My Time machine has stopped backing up and says that ther are some read only files preventing this. What steps do I need to take to fix it?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.

Licence service has stopped working

Getting the above error when launching Dreamweaver CS4. Have tried all the "solutions" listed on Adobe site to no avail. The last "solution" cleared the error pop up , I get to accept the licence agreement then Dreamweaver crashes.
Any advice appreciated.

Hi Nancy,
The original error code was /3 when the pop up "Licence service has stopped working" appeared. I went through all the solutions listed at Error "Licensing has stopped working" | Mac OS but it wasn't until I completed Solution 6 that the pop up disappeared. I get the licence agreement page click accept but nothing further happens.
Macbook Air OS X 10.9.5

My time capsule has stopped working.

My time capsule has stopped working. I get following error message The backup disk image “/Volumes/Michael Campbell's Time Cap/iMac.sparsebundle” could not be accessed (error -1). I tried everything including deleting all the data and starting again. It then works for a few back ups and then gives the error message. I have tried to repair the disk but that is grayed out.

Found this elsewhere so I will try it
Go to App folder
Open Utilities
Click on AirPort Utility
Highlight your Time Capsule
Go to Manual Setup
Click on Disks
Highlight your Time Capsule
Click on Disconnect All Users
Close AirPort Utility
Go to Systems Preferences
Click on Time Machine
Click on Select Disk
Find your Time Capsule and highlight it
Then click on USE BACKUP DISK.
Go to the Menu Bar and click on the Time Machine Icon
Click on Backup Now
It should work

My time capsule has stopped working since installing Yosemite. It says to wait to tell me how much longer but it stays that way for hours.

My time machine has stopped working since I upgraded to Yosemite. It gets to the point that says it will estimate the time remaining, but it never gives me that answer and it just stays on that page and never completes it's backup. This is a brand new macpro, so I wanted to capture the previous info on my computer I was able to put my external hard drive on new computer and it did the migration and all my old info returned. However, two days later I wanted to do a backup using Time Machine with my Western Digital Mac external hard drive but it won't progress past saying how much time remaining, even after several hours of sitting there.

You do need to wait a long time.. as it takes a long while for Yosemite to index the existing backup if it is large.
Here is Apple's List of bad things that happen to TM in Yosemite.
OS X Yosemite: Time Machine problems
It is clearly no where near as comprehensive as it needs to be.
I presume your disk has your old backup.. it may be better to keep the old backup.. save that for the future.. and get a new disk and start a fresh clean backup.
I would also recommend using Carbon Copy Cloner or similar for the time being. Make a bootable clone backup of your drive to a new external drive.. it is really superior in lots of ways to Time Machine. And does show you what it is doing.
For TM at least you can still use the widget so you have some log access to that TM does.
A1 here. http://pondini.org/TM/Troubleshooting.html

Thinkvantage "access connections windows wireless service" has stopped working

My new computer is a T400 running Windows 7 (lenovo disk installed after purchase) .
While it still connects to the internet through the Windows(?) "open network and sharing center the Thinkvantage Technologies "access connections windows wireless service" has stopped working. It worked fine for a while (4-6 weeks).
Any ideas on how to get it started again?
Thanks
John

Thank you for your reply. I'm just not sure what "it" to uninstall or where to get the new "it" to download. Would you mind adding those details for me? I appreciate your help
John

My Lock button on my iphone 5 has stopped working, and I'm not sure what to do.

My Lock button on my iphone 5 has stopped working, and I'm not sure what to do.

This will be covered by the 1 year Warranty. Make Genius reservation or set up service and take or send to Apple for resolution. Until then try Settings App > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock Screen. This can even turn iPhone OFF. To turn ON, connect to power, charger or USB of computer.

Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone no longer play), unable to transfer to computer either. Says Parameter error when I try to copy or play file

My Iphone 3G has stopped playing video entirely. (will not take play videos taken on the iphone), unable to transfer to computer either. Says Parameter error when I try to copy or play file. very frustrating, not being able to access past videos taken at all. This has been going on for a while now

Have you done any of the basic troublshooting steps described in the User Guide (Appendix B) - Restart, Reset, Restore?

Event id 142 , time service has stopped advertising bcz local is not synchronized

Similar Messages

Maybe you are looking for