Event id 8026 - document ...

I keep getting this error Event ID (8026) - and there’s no workflow attached on the mysite – so what is causing this and how can I get rid of this error?
Workflow Soap: GetTemplatesForItem failed
Item: 
Item:
http://mysite/personal/<username>/SharedDocuments/
Thread was being aborted; Thread was being aborted.."
If I browse the link – I get this:
 404 not found 
Can someone explain me what's happening? 

Hi JamesAtk,
From the error message, it is a workflow timeout issue, do you mean when you go the link
Http://mysite/personal/<username>/SharedDocuments/, the page is unavailable or item in the page cannot be opened? If you have library: SharedDocuments, would you please go to Library
Settings->Workflow Settins, check whether there are workflows in the settings page.
Thanks,
Qiao Wei
TechNet Community Support

Similar Messages

  • Raise event on Change document STUE

    Hi,
    when I add a document to a doc. structure in tx. CV12, a change document is created with change object STUE. When I try to raise an event on this document structure, i get an error "Key for change doc. object STUE and business object type DRAW are incompatible". I get this, no matter what Business object i try to use.
    I have tried to make a new business object with the key from STUZ, which should be the leading table in the change document.
    Still i get no events, when changing the document structure. Any ideas, or other solutions?
    Kind regards
    Mikkel

    Hi Mikkel,
    If your key matches the table STUZ's key fields exactly then it should work. In other words two key fields STLTY STLNR. If not or if this is not what you want then you have two options:
    1. Use SWED to define the key for STUE to have a structure DRAW. You will need to create and enter a FM to read/convert the changedoc data and supply the correct key for your DRAW object at runtime since it's differetn from STUZ.
    2. As above, but try explicitly defining the structure for your custom object. Alternatively a dummy FM in here is useful to try to debug what's going on.
    Hope that helps,
    Mike

  • Override event handler for document events in LiveCycle

    I would like to have an email notification when a user opens a policy-protected DRM pdf. Is there a way to override the event handler for Document Open events?
    Or perhaps there is a way to access the event database- where can I find this information?

    Thank you so much for your reply. I have created an external authorization and am following the steps outlined here: http://help.adobe.com/en_US/livecycle/9.0/programLC/help/index.htm?content=001479.html
    I have deployed my jar and restarted JBoss. However, now when I try to create a new policy using my external authorization, I do not see an option to add it on the create new policy page. I see only sections for Users and Groups, General Settings, Advanced Settings, and Unchangeable Advanced Settings. Could you please tell me how to add the external authorization?
    Also, in the component.xml file, I followed the sample and kept this line: <component-id>com.adobe.livecycle.samples.externalauthorization</component-id>
    Should that be changed? If so, to what?
    Thanks.

  • Separate Transaction event key and Document type

    Hello Gurus,
    Need suggestion and process how to have separate transaction event key and Document types sued in Material document creation with a different number range for the movement types used for SD processes.
    Example: 601/602/651 movement types have the Transaction event key as WL
                   561 has the Transaction event as WA
                   701/702 movement types have the Transaction event as WI
    the transaction event keys of WA WH WI WL WQ WR WS WZ have the same number range.
    I am looking for solution and suggestion as how do we maintain transaction event key and document type for SD dispatches, cancellation, returns movement types separately.
    Thanks and Regards

    Hi,
       U can create new document type in  OBF4  copy the existing on ee.g WA make new document type and in number range assign the FI  number range which u want to assign,  MM number  range can be create in T. code OMBT and FI number range in FBN1.  Documen ttype assignment to t. code is done in OMBA
    regards,
      zafar
    Edited by: zafar_karnalkar on Aug 13, 2010 12:23 PM

  • Start events via change documents (BUS2009)

    Hi All,
    I'm currently working on ECC 6.0 and need help for starting events via change documents.
    I want to restart a workflow whenever a cost centre in the PR is changed. So I have created an entry in SWEC with Change doc. object as BANF  and triggering event as On Change.
    In the field restriction I have entered EBKN-KOSTL. I want trigger two events SIGNIFICANTLYCHANGED to end previously started workflow and RELEASESTEPCREATED to start the new workflow.
    But whenever these events are triggered the new workflow starts with an error status and the old one remains as it is. The error for new workflow seems like there is no binding between triggered event object and started workflow.
    Please suggest. m i missing something ?
    Thanks,
    Shounak

    It's the same old bug. I think you have already configured the release strategy which triggers all the necessary events, now when you make entries in SWEC, this also triggers the event and the overlapping takes place resulting in the error you are getting. Either you remove the release strategy or the entries in SWEC. Further make sure you have terminating event "Changed" or "SignificantlyChanged" in the approval task based on your requirement.
    For the conditions, you can either control using start conditions or using the release strategy Characteristic FRG_EBAN_KOSTL if you want to stick to release settings.
    Regards, IA
    Edited by: Imthiaz Ahmed on Jul 29, 2008 10:51 AM

  • Get document closed event on any document, not only active one

    Hy
    I'm want to know if it's possibile to have a csxs event on any document taht the user closes. I'm now using documentAfterActivate to see when a user's activates a new document, by I want to be able to tell if the user has closed a document, even if it's not the active one in that moment.
    this is my code
         var csInterface = new CSInterface();
         /** other non influent code **/
         csInterface.addEventListener("documentAfterActivate", newDocumentOpened);
    But I can't find any event that suites my needs.
    Ssomeone has a clue? thank's.

    Hi,
    Looks like there are no AfterDocumentClose csxs event but you know that already. There are however regular AFTER_CLOSE event in InDesign Object model but it implies using a persistent engine. I have no idea how this would work combined to an extension.
    Another way I used with flash extensions was using some kind of interval to regularly check things unreachable in the object model.
    Loic

  • Business transaction events in FI document posting

    Dear All
      Has anyone worked with business transaction events in FI document posting.
    Function module  <b>SAMPLE_PROCESS_00001150</b>
    Please send me the code and i will modify according to my requirement.
    Anyone help is highly appreciated.
    Thanks in advance
    Thanks
    Sonali

    Hi,
    Check this link for step by step process to implement BTE.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
    Thanks,
    Naren

  • Catching scroll-down Event of PDF Document in Browser

    Hi Experts,
    We have a BSP Application where we have a flag confirming that the user has accepted our terms and condistions (T&C). There is a link where T&C can be displayed as pdf within a new browser window. Our Business people require to ensure that the user has read the entire document. That means that the user must scroll down the entire PDF until end. After scrolling till the end, the (accept)-flag can be selected. As the T&C are in a new browser windwo we have to catch the scroll down event from pdf (till end of document) and get back to the calling application providing wherther the user scrolled down till the end or not. If yes the accept flag can be selected and user can proceed to the next registration level.
    Do any body knows how to meet this requirement?
    Thank you
    Musti

    Hi Mustapha,
    This can acheived by using Form Fields....by caputring the values after an event is triggered.
    Below is the sample code..
    data:
    lt_fields     TYPE     TIHTTPNVP
      ls_fields  LIKE LINE OF lt_fields,
    case event->id.
    when 'click'
        CALL METHOD request->get_form_fields
          CHANGING
            fields = lt_fields.
    LOOP AT lt_fields INTO ls_fields WHERE name CS 'XXX'
                                                             AND  name CS 'XX'.
    ................Logic.................
    ................Logic.................
    ................Logic.................
    endloop.
    endcase.
    hope this is helpful.let me know if you have any concern.
    Thanks
    kalyan

  • Event id 8010 - Document Management Server

    Still got issues with this 8010 event id :
    "Content Organizer processing for site http://mysite/personal/<username> encountered an error.  Error:  Exception of type 'System.ArgumentException' was thrown."
    and this:
    "Content Organizer processing for site http://mysite encountered an error.  Error:  Exception of type 'System.ArgumentException' was thrown."
    I've followed this: http://technet.microsoft.com/en-us/library/ff808318.aspx  where it's stated 8010:
    "A file that was created by using a new version of Office client or Word Services has been encountered. Please visit http://go.microsoft.com/fwlink/?LinkId=157217 to download the latest Word Automation
    Services converter. Use the latest converter to make sure that newer Office documents are converted at the highest level of quality possible."
    I then downloaded the SDK - but it's not clear how I install the latest Word automation from the sdk.... (and how come I need this one - the user has only word 2003 and PDF files uploaded and why are the error thrown on the top mysite ??  

    Hi,
    1.Please check if word automation services provide all the files in your sites.
    http://msdn.microsoft.com/en-us/library/ee558830.aspx
    2. The event id 8010 maybe was caused by another error message not this one. please go to check your ULS logs to check if there are more information about it.
    3. Please make sure your top site and the personal site are accessble and there is no corruption.
    Regards,
    Seven

  • Event from Change document not triggerring

    Hi
    I've used chnage document FMRESERV to track change in table KBLP-DELTAWTAPP for any value change, but although I'm chnaging amount from FMX2, the event for this chanhe document is not triggerring. Can you please help me how to resolv the issue.

    Further, check if the change pointers are activated in transaction BD61 and if the pointers are maintained in transaction BD52. If these are maintained correctly along with the flag in the data element, the change pointers should be triggered.
    Does this help?

  • Server 2012 Event 307 - Printed Document Name

    I created a printer monitoring system that pulls events from the event logs of a server and then compiles this information into reports.  I can tell how many pages printed per printer for a period of time, I can tell what users are my highest printers
    and once in awhile for some reason I would actually review what was printed.
    I use this data to determine when another printer is needed or not needed.  I used the printed document name to justify not replacing a $5000 color laser printer. because they printed personal stuff more than business. 
    This process worked great until I installed Windows Server 2012, and I have tested this on Windows 8 and have the same result. (I only care about the server though.  ;) )
    In the event log: Microsoft-Windows-PrintService/Operational
    In server 2003, event 10: Had printed document name
    Server 2008 and Server 2008 R2: Had printed document name. 
    Why is this no longer there, or was this an oversight? 
    I asked this at TechEd and there was not a Microsoft person there who could answer my question and they referred me to the forums.  Can someone tell me what I can do to turn this on, was this an oversight, bug, etc.
    -------------------------------------------------- Michael Moore, MBA, MCITP, MCSE, MCTS, MCSA, MCP.

    Hi,
    What are the models of your printers?
    I would like to confirm that have you update the printer drivers from the printer manufacturer for Windows Server 2012?
    In addition, if you have Windows Server 2003, 2008, and 2012 in the same envirment? If so, you may try to get the event information from the previous operating system.
    Regards,
    Arthur Li
    TechNet Subscriber Support
    If you are
    TechNet Subscriptionuser
    and have any feedback on our support quality, please send your feedback here.
    Arthur Li
    TechNet Community Support

  • Raising event whenever a document gets changed

    hi all,
    how can we check whether any contents of table gets changed without using an abap report.
    the req is that i need to send a mail to another department whenever the content of table gets changed
    thanks in advance.

    hi,
    In order to record / log changes which are made to a business object an change document object must be created.
    then this change document object is then assigned to an event and then appropriate action ie. create/change/display is defined.
    the assignement between the change document is done using the tcode : SWEC
    so when an events get triggered based on whether the object was changed, displayed, created then a function module can be called . this can be done by using SWETYPV.
    in this function module we can then write the custom coding that we need.
    1. you create a object using SWEC and then assign an event to it in SWEC for change.
    2. then using SWETYPV you assign a receiver function to that event.
    3. now write the required custom coding in your function module.
    Hope this will help you!!!
    Thanks & Regards,
    Punit Raval.

  • Create BO Event via Change Document

    Hello gurus
    I'm having some trouble creating an event via a change document for a custom Z table.  I've already followed the steps outlined in help.sap.com:
    1. Created the change document for the z table and generated the program.
    2. Made the Z table and its data elements relevant for change documents.  Did this through the Technical Settings for table (Log changes checkbox) and data element characteristics.
    3. Made an entry under "CREATE" in SWED for my new change document object, with the z table as the leading table and change document key with structure.
    4. Made an entry for my event in SWEC and linked it for a create of the change document.
    However, the event is not being fired when a new entry is made in the z table.  I set a breakpoint in the funcion module generated for the change document but it's not being detected apparently.
    Are there any further settings I need to look at/change for the change document to activate the event?  Thanks in advance
    Regards,
    Juan Ramos

    Hi Ramki
    Indeed, I consider using SAP_WAPI_CREATE_EVENT much, much simpler, but unfortunately it was another consultant, not me, who built the table, its code, and the code behind the z transaction where the table is used (and he's based offshore).  It was only just now that I also found the code he wrote for the txn. 
    If I would have to add code anyway to make the change document work, I'll just talk to the consultant to have him add the SAP_WAPI_CREATE_EVENT, or I'll just add it myself if I get permission from our development manager.
    Thanks for your help as always!
    Regards,
    Juan Ramos

  • Register an event for illustrator document.

    Hi guys,
    Is there an any api to register the mouse click event or something on the illustrator document?
    Any help would be appreciated.

    I can only help yo uwith Windows; its very different on the Mac.
    The first thing to do is to find the document's HWND first. You can do that by keeping track of all the 'OWL.Document' window classes; these are the document windows. The best way is to catch the document opened & closed notifiers and see which OWL.Documents appear & disappear as documents are opened & closed. That will let you associate the correct starting point with the current document. As a side note: when looking, you'll need to look in two different ways in CS6+ becuase of the way they organized the tabbed documents in CS6. So you might think you have it all working and then find that it doesn't seem to work if you undock the current document -- just a head's up!
    Once you have the document's HWND, you'll need to figure out which child is the one that's getting all the mouse events. That'll depend on what version of AI you're running -- CS5 & CS6 are different (CS4 might be the same as CS5, can't remember, its been a while). The best way to tell is to fire up Spy++ and once you know the parent document window, just stick the message watch on different children (it'll be near the top of the hierarchy) and watch for mouse events when you move your mouse over the document window. Once you know which one it is, it shoudn't be too hard to install a mouse hook on that window (we use SetWindowLongPtr() to get all messages). Obviously, you'll need uninstall & reinstall the mouse hook every time the document changes and/or closes. Once you have the hook though,  you just need to watch for whatever click event you want and grab the mouse location (we track WM_MOUSEMOVE because we just want to know where the mouse is, not where it clicks, naturally you'd want something like WM_MOUSEUP).
    The coordinates will be in document coordinates so you'll need to use AIDocumentView::FixedViewPointToArtworkPoint() if you want to know the artboard coordinate, but maybe you're okay with the document pixel coordinate, I don't know
    Anyways, hope that helps! Mac is similar, but the window methods & strucutres are different -- same idea though: find the right window and listen to its mouse events!

  • Triggering events using changed documents

    Hi friends,
                      In transaction SWEC, How can I use the two options 'On create' and 'on delete'.
    Thanks,
    Gaurav

    Check this beautiful [artcle|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80ddeba4-e780-2b10-7bb2-fc7a33efabbd]

Maybe you are looking for