Event log for events from function module BP_EVENT_RAISE

Hello experts,
where can I look at the event log which where raised with the
function modul BP_EVENT_RAISE.
Thanks.
Regards, Lars.

this function module does not write a log by itself. and actually i would not know what should be in that log. usually you set up an event to trigger a follow-up process, so there's either the event was successfully triggered and your follow-up process has been started ... or it hasn't, which means: something went wrong ...
Edited by: Mylene Euridice Dorias on Apr 16, 2008 10:42 AM
i was just sap-netting with your problem and i found note [919458|https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=919458&nlang=EN&smpsrv=https%3a%2f%2fwebsmp205%2esap-ag%2ede] where they use program BTC_EVENT_RAISE instead of BP_EVENT_RAISE. the note says this program writes at least a line in the job-log so it might fulfill your requirements ...

Similar Messages

What is the exact syntax for calling remote function module.

Hi to all
1.....what is the exact syntax for calling remote function module.?
Thanks and regards,
k.swaminath reddy

hi
good
Lets do simple example where you will first create a RFC in one server (say A) and create normal program in othere server (say B). Finally you will call the RFC in A from B.
Do the following steps for creating RFC in server A.
1. log on to server A
2. go to se37
3. Edit -> function groups-> create function group and give the function group name (say ZGRP).
4. create a FM ( say Z_TEST_RFC) in se37 providing the function group which is created just now.
5. go to attribute tab -> choose remote-enabled module from processing type.
so that your FM will become RFC.
6. provide the import parameter in import tab.
we will provide only two import parameters.
- parameter name : P_NUM1, typing: TYPE, associated type : I & check the pass value (all the parameters of RFC must pass by value).
- parameter name : P_NUM2, typing: TYPE, associated type : I & check the pass value
7. provide the export parameter in export tab.
parameter name : P_SUM, typing: TYPE, associated type : I & check the pass value
8. write the given simple code in source code tab.
FUNCTION Z_TEST_RFC.
P_TOT = P_NUM1 + P_NUM2.
ENDFUNCTION.
Do the following steps for creating ABAP program which will call the RFC in server B.
1. se38 - > creat a program.
2. write the given simple code.
data tot type i.
call function 'Z_TEST_RFC' destination 'XXXXXX'
exporting
p_num1 = 10
p_num2 = 15
importing
p_tot = tot.
write tot.
please note that XXXXXX is RFC connection which is avialable in sm59 transaction in server A.
-go to sm59 - > abap connection (list of RFC connection configurations are avialable). choose server B connection and replace it of XXXXXX in the code.
finally you can execute the normal abap program that will call the RFC and display the result.
reward point if helpful.
thanks
mrutyun^

How to create webservice from function module

Hello,
I'm trying to create webservice from function module from. I choose Utilities/More Utilities/Create Webservice/..From function Module. What data should I enter in section "Enter Package/Request" ?
When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign namespaces"
Is there any doc about this procedure (web service creation) with description of all sections ?
thanks for any reply,
Lukasz Ferenc

Hi,
Which SAP product of wich release of which SP are you using ?
The procedure is documented in help.sap.com and in blogs and SDN forum messages.
It means that the use of the SEARCH button should give plenty of answers...
>When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign >namespaces"
As usual, begin your choosen name with an "Z".
Regards,
Olivier

Calling a report from function module

Hi Friends,
I have requirement for Function Module i.e. we will add the button to the standard T-code and ( Function added in config ) then
Function to be called from Customizing
Program A called from customizing function
CalculationPDFFunction is called from program A.
So can any one help me the logic for "calling a report from function module ".
Thanks in Advance.
Regards,
OSReddy.
Edited by: OSReddy on Sep 23, 2011 7:31 AM

Hi Jaya,
Yes. It is possible to call ur custom program using SUBMIT statement.
1. If u have data to pass then build table type RSPARAMS and use below statement.
data:
      rspar_tab TYPE TABLE OF rsparams,
      rspar_line LIKE LINE OF rspar_tab,
SUBMIT report1 WITH SELECTION-TABLE rspar_tab
               AND RETURN.
1. If u want to create variant to the program and use that. use the below statement .
SUBMIT report1 USING SELECTION-SET 'VAR1' "variant
               AND RETURN.
Regards,
Venkat.O

Issue in creating web service for a ABAP Function Module

Hi,
now i'm learning how to create web service for a ABAP Function Module. I used the following steps.
1. select the Function Module, named "zws_test".
2. in the context menu, select "create->proxy object". so we enter into wizard.
3. in the wizard, press the radio button "Service Provider".
4. in the next page, press the radio button "Existing ABAP Objects(Inside Out)".
5. In the next page, Enter the "zws_test_prvider" as Service Definition and select "Function Module" as Endpoint Type.
6. in the next page, enter "zws_test" as Function Module and mark the "Mapping der Namen" button
7. in the next page,select "PRF_DT_IF_SEC_LOW" as Profile and mark "Deploy Service".
8. Save in the local package.
9. then it will pop up a window with title "WSDL Source". i selected "URL/HTTP Destination" and press "OK".
10.in the next page, i enter the URL as "http://hostname:portnumber/", and press "OK".
11. then it will pop up a window with title "Display logs". A record with error message "HTTP error(return code 404, message "Not found")" appears.
12. i press "ok" and a service provider with name "zws_test_prvider" appears in my local package.
13. i use "zws_test_prvider"'s URL to create a service consumer "ZCO_WS_TEST_CONSUMER" and logic portal "LP1".
14. But when i test my service consumer "ZCO_WS_TEST_CONSUMER", it will throw an exception "cx_ai_system_fault" with errortext "SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/".
15. I use t-code SM59 to test connection and get the following info.
      Status HTTP Response     200
      Status Text                      OK
      Duration Test Call             328 ms.
who can give me the reasons about item 11 and 14, and explain me how to create service provider and service consumer for a Function Module.
Thanks in advance
Johnney

have you seen this weblog
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices

How to create a generic datasource from function module?

Dear experts,
I have created a generic datasource from function module. For this extrator, I created a function module and a structure.
I have now some difficulties to continue:
In this function module, i get data from different transparent tables. Then i put these data into an internal table.
I just don't know what is the relatioin between the structure i defined and this internal table.
I should make "iTab structure AA" in the source code?
Thanks

Hi..
check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
1. Create s structure with the fields that you need from the 4 tables . Activate.
2. Goto SE 80 Select The Function Group , Copy , Select the Function module
" RSAX_BIW_GET_DATA_SIMPLE " and Give a New name starting With
Y or Z .
3. SE37 ->Your Function module name -> Change , In table tab give your structure
name by deleting the associated type given in " XXXX " .
4. Now select source code and Do the coding . Give Data source name in Coding .
In your case you have to take data from more that 1 table .
5. Activate the Function Group .
6. In RSO2 Create the Data source , Give the Function Module Name , And Save.
7. RSA3 -> Give data source name and Check for the Records .
Creation of custom datasource. (Using function module)
.Create a function group .
. Structure ZTXXXX
Create function module (i.e. ZTESTXXX) .
. Create the data source using transaction (RSO2).
. If structure exists for the table parameter of your function module then ok else create a structure for the table parameter .
Test the datasource in R/3 using transaction RSA3.
Transfer the data source to BW System and replicate it in the BW-System.
Message was edited by:
shiv

Urgent: Web Service from Function Module

Hi guys, I am new to this area so please help to achieve following:
I want to show a demo to load data from a web service to BI. I have performed the following steps and dont know how to process further. Please help me in the sense where do I put the logic to show fields on the web service and .
1. I have created a web service data source in BI with four fields (Cal dat, material, amount and currency)
2. This created a Web Service /RFC FM automatically.
3. From this FM I created a web service (Utilities create web service from function module)
4. I followed the web service creation wizard.
Thanks,
sam

releasing and related steps are fine,
what i want to know is, BW/BI datasource will create a FM, from this FM inturn I will create a webservice.
Lets say BW/BI datasource has 4 fields account, company, amount & currency.
I want to enter these 4 values from the webservice which will bring these values to BW delta queue and eventually get loaded in BW.
For this process do I need to code anything in the FM or any other part of the system

Can we change WSDL file created from Function Module wizard??

Hi everybody!
I have created a web service from function module using SAP wizard.
Now the consumer side want me to change <wsp:UsingPolicy wsdl:required="true"/>
Is this possible???
If so how?????
Thank u in advance!!

Hi Muhammad!
As soon as you open WSDL for selected binding in the URL are of you explorer change the ws_policy with "standard" . Then simply save the wsdl and send it to the other party.
Hope this helps!

Where the documentation is provided for the Standard Function module ?

If there is no documentation provided for the standard function module in SE37 what is the best way to understand the functionality of the function module?Is there any where we can find the documentation?
Please dont say the From coding part its too vast to understand
Ex: HRCM_ORGSTRC_INFO_TABLE_GET
Paint for me ..
Regards
sas
Edited by: Julius Bussche on Mar 18, 2009 1:17 PM

O Really thanks amit !!
Are you able to understand the below code and please provide your valuable inputs what we are understanding is the same.
PERFORM read_infotypes.
*-- ********************************************************** NMP
*-- IF scb frozen then write to itab-scb field. nmp 11/2001.
*-- ********************************************************** NMP
*--Begin of Change by vneld - 01/17/2007
* IF PA0001-ZZBERN NE SPACE.
*    FROZEN = PA0001-ZZBERN.
* ENDIF.
* ITAB-SCB = FROZEN.
*-- ********************************************************** NMP
*--end of Change by vneld- 01/17/2007
PERFORM get_date USING '92'
                   CHANGING w_hiredate.
PERFORM get_date USING '93'
                   CHANGING w_rehire.
PERFORM get_date USING '94'
                   CHANGING w_termdate.
IF NOT ( w_rehire IS INITIAL ).
    w_hiredate = w_rehire.
    itab-code = 'R'.
ELSE.
    itab-code = 'H'.
ENDIF.
IF p0001-persg = '3'.
    itab-code = 'T'.
ENDIF.
*Change by Mdukes
** We need HIRE,Rehire & term within 13 month`s window
** But if someone Hire in IT ,change dept and then terminated .
** We need to exclude that person from the list .
** We need to change his Org.Unit by END_DATE 12/31/9999 from Pa0001.
CLEAR:result_tab.REFRESH:result_tab.
CALL FUNCTION 'HRCM_ORGSTRC_INFO_TABLE_GET'
    EXPORTING
      PLVAR          = '01'
      ROOT_OTYPE     = 'O'
      ROOT_OBJID     = P0001-ORGEH
      BEGDA          = SY-DATUM
      ENDDA          = P0001-ENDDA
      PATH_ID        = EVPATH
      PATH_DEPTH     = 10
    TABLES
      ORG_INFO_TABLE = result_tab
    EXCEPTIONS
      PATH_ERROR     = 1
      ROOT_ERROR     = 2
      OTHERS         = 3.
* CALL FUNCTION 'RH_STRUC_GET'
*    EXPORTING = 'O'
*      act_objid       = PA0001-ORGEH
*      act_wegid       = EVPATH
*      act_plvar       = TYPE
*      act_tflag       = space
*      act_vflag       = space
*      authority_check = space
*    TABLES
*      result_tab      = result_tab
*    EXCEPTIONS
*      no_plvar_found = 1
*      no_entry_found = 2
*      OTHERS          = 3.
* reading the Org.Unit based on employee Org.unit (Evaluation Path 'O-O'.
* After that making sure the latest Pa0001 org.unit is part of selection org.unit
* If yes, set the flag to = 1 . Otherwise ignore the rec .
* We want only IT folks hire/rehire/term within 13 monthu2019s window
* if somebody change the dept and get term within 13 monthu2019s .it
* Should show up in hire but not in term report .
CLEAR:REC.
lOOP AT result_tab.
    read table PCHOBJID with key low = result_tab-OBJID.
    if sy-subrc = 0 .
      Rec = 1.
      EXIT.
    Endif.
ENDLOOP.
if rec = 1.
*--begin of change by vneld- 01/17/07
    CHECK ( ( w_hiredate >= w_13th_mnth_date AND w_hiredate <= sy-datum )
      OR
          ( w_termdate >= w_13th_mnth_date AND w_termdate <= sy-datum ) ).
*--end of change by vneld- 01/17/07
**---check for hires or terms in the calendar year.
**---No future terms
* CHECK ( ( W_HIREDATE(4) = SY-DATUM(4) ) OR
* ( W_TERMDATE(4) = SY-DATUM(4) AND W_TERMDATE <= SY-DATUM ) ).
    CONCATENATE p0002-vorna p0002-nachn INTO itab-name SEPARATED BY ' '.
*--Begin of change by vneld 03/29/2007
*--get supervisor name
    data : lname(20),
           fname(20).
    clear: lname,
           fname.
    Select vorna nachn from pa0002 into (fname ,lname)
           where pernr = p0001-zzsuper_no.
    endselect.
    CONCATENATE lname fname INTO itab-supv SEPARATED BY ' '.
* itab-supv = p0001-zzsuper_text.
*--End of change by vneld 03/29/2007
*----get employee group text
    CLEAR t501t.
    SELECT SINGLE * FROM t501t WHERE sprsl = 'EN' AND
                                     persg = p0001-persg.
    IF sy-subrc EQ 0.
      itab-group = t501t-ptext.
    ENDIF.
    PERFORM get_dept.
    PERFORM get_position.
    PERFORM append_fields.
endif.
ENDFORM.                    " PROCESS_EMPLOYEE
Edited by: saslove sap on Mar 19, 2009 7:45 AM

Creating Spool from function module

Hi friends,
I want to create a spool from my function module. I dont knw it is possible or not. Currently I am creating spool by submitting another report from my function module and exporting the values calculated in memory ID and importing in report which is not a good practise, kindly suggest some other way.
Thanks,
Brijesh

No. Spool is not possible from Function Module. You have to use that FM from one report/program.
Thanks
Subhankar

Replacement for these Obsolete Function Modules

Hi,
Can anyone tell me the replacement for these Obsolete Function Modules .
1) K_BUSINESS_PROCESS_READ
2) HELP_VALUES_GET_WITH_TABLE_EXT
3) G_SET_AVAILABLE
Regards,
Arun

hi check thes for any function modeules...
http://www.erpgenie.com/abap/functions.htm
http://www.sap-img.com/abap/function-list.htm
regards,
venkat.

Provide Asynchornous Webservice from Function Module

Hi!
I need to create a webservice to provide master data. My scenario do not use Process Integration, so I create the webservice from function module (Remote-Enable Module) through SE80.
When service is created I can see in the configuration tag that is not possible to change to asynchronous mode.
I want to create asynchronous webservice because I need to return master data. Selecting this data consume a lot of time, so in order to avoid timeouts I think is better to create asynchronous webservice.
May be I am wrong but I think is not possible to create async webservice without PI.
All documents I have read until now show async comunication through PI and using proxy clients but I have not found the case I am talking.
Thanks
Reagards
Edited by: jordis on Mar 17, 2011 4:45 PM

Thanks Raja,
I think I'm confusing about synchronous / asynchronous concept in webservices. I need an example or an explanation where I can understand it. Taking account that I do not have PI, where scenario I'm moving in?
I mean, is it possible that an external client calls my webservice created through FM in async mode? Maybe is the client who has to create the corresponding call to the webservice in async mode and I have to do anything.
Another question related, what does it means the propierty sync/async in a proxy?
I do not understand your sugestion since I think that proxy creaton is relevant in case of the connecting SAP with an external system (I tried it and I have to inform an URL o WSDL).
All documents I have readed have been in the context of PI and I think my case is more simply.
Any more suggestions, links or ideas?
Thanks
Regards
Edited by: jordis on Mar 18, 2011 12:41 PM

Runtime analysis for an RFC function Module

Hi,
How to get an Runtime analysis for an RFC function Module?
I have an RFC function Module I am using it for a WEB INTERFACE . For this function Module I need to get Runtime Analysis.
Please do not duplicate or cross post
Edited by: Rob Burbank on Feb 21, 2009 11:42 AM

Total Questions: 40 (39 unresolved)
Duplicate thread locked.
Rob

Webservice from function module

I have created a webservice for a RFC function module.
but in SICF i cannott test it...it is opening a browser but it is showing page cannot be displayed.
can anybody tell me the webservice testing procedure..
Xperts plz...

[Testing Web Services in the Web Services Navigator|http://help.sap.com/saphelp_nwpi71/helpdata/en/46/7a875063e42d86e10000000a11466f/content.htm]

I generated web service from function module.Where can I find .wsdl file ?

Hi,
I generated web service from function module.
Where can I find .wsdl file ?
I want to use .wsdl file in .Net application.
Thanks.

Hii Cemil Bozlagan,
All Remote enabled Function Modules in Web AS 6.20 and Above are available as Webservices and the WSDL documents are available in the web service repository at
[http://<host>:<port>/sap/bc/bsp/sap/webservicebrowser/search.html]
Find the respective BAPI.
Click on the WSDL link in the browser and download the WSDL document and use it as per the requirement
Regards,
Varun

Event log for events from function module BP_EVENT_RAISE

Similar Messages

Maybe you are looking for