Event starts

Hello,
i've got a problem with my event structure.
i call a subvi with a event structure.
the first call it works right.
if i call the subvi a second time a event executes.
where does the event comes from?
markus
Attachments:
event.gif ‏34 KB

Hi Markus,
Try moving the "abbrechen" terminal into its event case (it doesn't need to be wired to anything) and test a local-copy of abbrechen for the Queue-handler loop-condition.
Cheers!
When they give imbeciles handicap-parking, I won't have so far to walk!

Similar Messages

Is there a way to enter an event time in Calendar as a reminder for me and NOT have Calendar erase it in the info as it reads it into the event start and end times?

Calendar can recognize and derive event start and end times from the text description entered. However, when it seizes on a time (start and/or end) and automatically enters it as the start and/or end time, it also (sigh) deletes the time from the text. I enter the times as reminders for me, how can one prevent them from being deleted by Calendar??

I am having the same darn problem. I really dislike this auto feature in Calendar.
Can anyone help us please?

Key Command troubles: Set Region/Event Start to SPL Position not working?

Hello,
I'm simply trying to find a key command that will allow me to move regions quickly from one part of a song to another without dragging with them with the mouse in the arrange window. I thought I found the solution with the key command "Set Region/Event Start to SPL Position", however it doesn't seem to be doing anything!
Here's what I've tried: First I select the region I want to move, then I move my SPL to a location using the "go to Position" key command and typing in a bar. I then try to use the "Set Region/Event Start to SPL Position" key command (which I set to Shift-Control-L) and nothing happens. Shouldn't it be moving my region to the SPL? Note: the region is still selected, but refuses to move. Am I doing something wrong? Is this not what this key command was designed to do?
In my attempts to get the darn thing to work, I also discovered that lock screen-set (Shift-L) key command also does not seem to work (it is not toggling the black dot after the screen-set number like usual). Does this mean my key commands may be corrupted? (which would be a real drag!!) Oddly enough, these are the two are the only two that do not seem to be working, as all others seem to be working fine (AFAIK).
I've had this problem in the past with the lock screen-set key command not working, and rebuild all key commands and templates when I upgraded to tiger. I thought everything was working fine!
Any advice would be greatly appreciated! Thanks in advance for your help!!

I assigned F5 to two functions. In the key commands
window, pressing F5 highlighted the first assignment.
Pressing it again highlighted the second assignment.
So just keep pressing the key to see whether it's
assigned to more than one command...
Well, now when I type "Shift-L" into the finder in the top right of the key commands window, no key commands at all are show. However, which I search for the word "lock," the lock screenset key command comes up as "Shift-L." Oddly, if I search any other key commands (such as F1, "cmd-k," or even other shift ones like "shift-," the associated key commands show up.
To test, I changed the screen set lock from Shift-L to "opt-ctrl-L" and it now works again. However, it still will not come up in the key commands window through searching by "opt-ctrl-L"
On what may be a side note, the search feature seems very buggy! Tell me if I'm doing this right: First I open the key commands window, which opens with nothing selected. Now, in order to search by key command I go up to the top right corner where the magnifying glass is, place my curser inside and type in the key command correct? When I do this, it shows me the highlighted key command in the left, and my curser is no longer flashing up in the magnifying glass, correct?
Now, in order to search again, I have to place my curser in the search field again, right? However, now when I search by key command, not all of them register! For example, my "go to position" key command is simply ; but when I type it, nothing comes up in the search, and instead of the magnifying glass window being blank like before, the actual ; is in the box. Oddly enough, searching with "Cmnd-K" still works!
What is going on? Am I doing something wrong? How do I fix this, as it is very frustrating!! thanks again for your help

How do you alter the event start time

The event start time always defaults to 5:00 pm. How do I change this.

Thanks for replying. Yes my event time is responding as you pointed out, however I' putting on a number of events at about 4:00 pm that all start about 8:30 am so it would be very useful if the default time could be set for a specific time. Thunderbird is version 31.5.0, I only started using this programme a few days ago and downloaded the Lightening Calendar at that time. Could not find how to find the version of Lightening perhaps you could help there as well. Regards

Every event starts on the 5min mark (10:05) and I can't edit it!!!

Every event starts on the 5min mark (10:05) and I can't edit it for some reason. I can change the date, the hour, and the am/pm, but not the minutes. It's very strange.
Is there a way to "reload" or "restore" iCal?
Using version 3.0.8

Hi，
We wonder that if you took any action before this issue occurred such as installed a device/program or updated any driver programs.
Check your issue under clean boot.
https://support.microsoft.com/en-us/kb/929135?wa=wsignin1.0
Use the System File Checker tool to repair missing or corrupted system files
https://support.microsoft.com/en-us/kb/929833
Since Windows 10 is still in Technical preview stage, we don’t suggest fixing system problem by using system upgrade. And as mentioned by Frederik Long, There is no "downgrade" path from Windows 10 to Windows 7.
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Printing event start and stop times

In month view, is there any way to have both the start and stop times for an event show when you print the calendar so you can see the duration of an event - thanks.

You might be able to use this script to reset the start/stop times to zero. Try with a small selection and see if it works for you.
http://dougscripts.com/itunes/scripts/ss.php?sp=batchtrimtime

Is there a way to set/change default event start/end time?

Is there a way to set or change the default start and end time for events?

This question/problem applies to OS X Mavericks as well. I wish I could change it.

Midi events start late

I have noticed that some tracks that have midi events (VST's: RealRPC / Native Instruments) start late the first time that I play the project after opening it. The second time the project plans fine. This also happens when I bounce the project - some midi tracks start late.
My setup:
Logic 9 Express
DAW: Mac Mini Server (i7 quad core 2GHz / 8 MB RAM)
thanks in advance!

I'm trying to do a similar thing - I'm no expert but here's a few ideas:
First you need a Transmitter not a Receiver (confusingly) - it takes signals from your keyboard and Transmits them to other receivers in your program.
So you have a Device, d, a Transmitter, t, and use MidiSystem.getSequencer() to get a Sequencer, s.
You also need a Receiver for the sequencer, r.
add the Transmitter to the Device: t = d.getTransmitter();
add the Receiver to the Sequencer r = s.getReceiver();
connect them together: t.setReceiver(r);
The class where you want to do stuff with incoming midi signals should implement interface ControllerEventListener, i.e. it has a method controlChange(shortMessage event) which will be called when the sequencer receives midi via receiver r. Then, provided the above code is inside this class, you can add the event listener to the sequencer by:
listenedSoFar = s.addControllerEventListener(this, listened)
where listened is int[], a list of the kinds of messages you want to deal with. Elements can be between 0-127. Class ShortMessage has constatnts for these like ShortMessage.NOTE_ON etc. listenedSoFar is a list of all the kinds of messages this event listener responds to. If this is the first/only addControllerEventListener then listenedSoFar should equal listened.
I'm not sure this is exactly right as i'm in the middle of writing my program. If you've already cracked the problem then any tips you have would be appreciated.
George

Event start time sets automatically to 19:00 and can't be changed

New Events are automatically given a start time of 19:00 and cannot be changed. In addition, all my previously entered events, both single and recurring, have had their start times set to 19:00. My iMac had been unused for almost three months and upon returning to the machine, an update was available for Max OS, which I allowed to be installed. I'm now running 10.6.2, but I don't know if that has anything to do with this problem. Something changed, and that's the only change I know of. Thank you.

Bob,
One of the first things to try is "refresh" the com.apple.iCal.plist file. You will find the com.apple.iCal.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder. Quit iCal, drag the .plist file to your Desktop, log out/in or restart and check iCal for normal behavior.
Also open System Preferences...>Language & Text>Formats>Region and set/reset the appropriate region. Then set/reset "Customize..." in "Times."
;~)

Bug? - Events starting at midnight sync incorrectly

I just synced my iCal to my iPhone, and every event that started at midnight seemed to get pushed to the day before. Once I gave these events a specified time during the middle of the day, they were on the right day.

Hi, Thanks, but I'm unsure how to do that. I've copied the crt file from my apache installation to my phone, and when I tap on it in a file manager, the phone proposes to open it using an installation app for certificates. However, when I tap it, it tells me it cannot read the file. The log says:
[ 03-04 22:40:05.782 4815: 4815 E/CertInstaller ]
Failed to read certificate: java.io.FileNotFoundException: /storage/emulated/0/.../server.crt: open failed: EACCES (Permission denied)
It has 0660 permissions, but I cannot chmod it to 0666: I don't have the rights.
How should I install the certificate?

Every hour in my iCal is Saturday, every event starts at 19:00, every file is stored at 19:00...?

1) Every hour in my iCal has suddenly became marked as "Sat", except Noon
2) Any event I enter to iCal starts at 19:00 regardless of actual time
3) Any file saved on my computer shows "Date Modified" with correct date but time always starts with "19:XX" (the minutes seem correct).
My computer time is correct. I have tried to restart my apps and computer several times but no change.
Any ideas?

Issue solved. I had entered 19: manually to Language & Text > Formats > Times manually to get 24hr format instead of using Apple time fields. Stupid me.

Events Started repeatedly

Hello masters, how you doing?
When i create a Purchase Requisition the business object trigger the event RELEASESTEPCREATED. It is normal, but, the problem is that event is started four times, at the same time.
Already anyone here confront this problem?
How do i do to fix it?
Thanks in advance guys.
Regards.
Danilo Cardoso

Hi Danila,
Please check in SWEL if the event is getting triggered multiple times for the same process. If yes, then this would cause your workflow to get triggered multiple times.
To avoid this, you can make use of Actions / Output types. In them we have a settings to trigger workflow only once for a paticular instance even if the event gets fired multiple times.
Regards,
Saumya

Triggering event - start business workflow

Hi,
I have developed an business workflow which should start if a "transfer order" (Logistic Execution) was created.
If I create an event (manual) to start the business workflow (BUS2018) it works fine, but if I create a "transfer order" it doesn't work (no event where created).
I have coupled (and activated) the event to the workflow (transaction SWETYPV). Whats the reason? Any idea?
Thanks Michael

Check if check function modules exist on this event which prevents it from instantiating a workflow. (SWE2, or SWETYPV double click the event-->wf entry)
do the same with conditions (transaction SWB_COND)
Kind regards, Rob Dielemans

BPM start event(start condition) doesn't support ejb function call?

Hi all,
An id is included in the ws call to trigger the bpm flow,
I have developed a ejb function, which is doing a simple check whether the process for the specific id is called before or not.
I have a simple table in bpm java server which records the id used before.
the ejb is called in the start condition, my desired behavior is: if the ejb returns true, no process should be triggered.
but the thing is, my flow is not getting triggered once I put the ejb call in the start condition.(ejb is called, as i can see new id record inserted into my db table)
I cannot even debug the process.
I can debug the process if that ejb call is removed from the start condition.
my server is 7.31 sp8
Best regards,
Jun

Thanks for confirming Jun Wu.... always comforting to see even the experts can stuff it up from time to time... and very glad you were able to fix it!

Flash installer wont event start

i was trying to update my flash player because mozilla is starting to be unable to fully view some sites. i downloaded the installer but it wont start. i double clicked and nothing happened. nothing at all, not even an error message.
i also tried uninstalling flash and try again but still wont do a thing.
can someone help me with this?

i did what you said mdanehy and it did indeed upload it again
however it crashed 3 minute later adobe flashplayer 11.4r402 has stoped working
a problem caused the program to stop working correctley windows close the program and notify you if solutions are available
then another page opened saying
Data Execution Prevention (DEP) is a security feature that can help prevent damage to your computer from viruses and other security threats. Harmful programs can try to attack Windows by attempting to run (also known as execute) code from system memory locations reserved for Windows and other authorized programs. These types of attacks can harm your programs and files.
DEP can help protect your computer by monitoring your programs to make sure that they use system memory safely. If DEP notices a program on your computer using memory incorrectly, it closes the program and notifies you.

Event starts

Similar Messages

Maybe you are looking for