EVENTS are not updated in SPfile.
Hi,
I have changed the EVENTs using below command and create P file from SPfile and restarted the Database. but when i am checking using show parametr event it is not showing. please see the commands ,are they correct.
but in initSID.ora it is showing.
ALTER SYSTEM SET
EVENT="10027 trace name context forever, level 1",
"10028 trace name context forever, level 1",
"10949 trace name context forever, level 2",
"10162 trace name context forever, level 1",
"10183 trace name context forever, level 1",
"10191 trace name context forever, level 1",
"10629 trace name context forever, level 32",
"10091 trace name context forever, level 1",
"10891 trace name context forever, level 1",
"14532 trace name context forever, level 1",
"38085 trace name context forever, level 1",
"38068 trace name context forever, level 100",
"44951 trace name context forever, level 1024",
"38087 trace name context forever, level 1",
"10411 trace name context forever, level 1"
SCOPE=SPFILE;
create pfile from spfile;
Best Regards,
Avinash Ravut.
initSID.ora contains
event='10027 trace name context forever, level 1','10028 trace name context forever, level 1','10091 trace name context forever, level 1','10162 trace name context forever, level 1','10183 trace name context forever, level 1','10191 trace name context forever, level 1','10629 trace name context forever, level 32','10891 trace name context forever, level 1','14532 trace name context forever, level 1','38068 trace name context forever, level 100','38087 trace name context forever, level 1','44951 trace name context forever, level 1024'
...So single quote. For me best way to set this,
1. take a backup of both SPFILE and P File.
2.Change Even directly in P file.
3. Shutdown database
4. Create SPFILE from P file.
5. Startup database.
Or else you can use the procedure you are following..but just with a single quote.
alter system set event='10027 trace name context forever, level 1','10028 trace name context forever, level 1','10091 trace name context forever, level 1','10162 trace name context forever, level 1','10183 trace name context forever, level 1','10191 trace name context forever, level 1','10629 trace name context forever, level 32','10891 trace name context forever, level 1','14532 trace name context forever, level 1','38068 trace name context forever, level 100','38087 trace name context forever, level 1','44951 trace name context forever, level 1024' scope=spfile;
Similar Messages
-
My iPhoto Events are not updating in AppleTV.
I can see most recent photos, but the Events stop in June. I migrated from my original MacMini in June to a new iMac and that seems to be the same timeline as the latest event showing in Apple TV. Tried realigning both AppleTV (with reset) and toggling the iPhoto/iTunes settings. Any suggestions?
Thanks, it was set on manual instead of by date (?). Wonder why iphoto help doesn't note that..... Thanks so much for your help.
-
I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphoneThis sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.
-
I have many projects made in imovie HD that are not updating to iMovie 10 on my new iMac. Why is this not working as stated on the article HT202853? How do I get my projects back from backup after old iMac crashed?
According to:
Update projects and events from previous versions of iMovie in iMovie (2014) - Apple Support
you can update from iMovie versions 7, 8 and 9, but iMovie HD is iMovie 6.
Maybe you can update in two steps, first from iMovie 6 to iMovie 7, 8 or 9 then to iMovie 10.
Geoff. -
Hello
After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).I found this other thread discussing this topic, no fix, I will revert to 9.1.1 from Time Machine and wait for a new update.
https://discussions.apple.com/thread/3023160? -
Dates in Events do not update automatically
After iPhoto made events out of my photo library during conversion from from iPhoto06, there are often photos from several days in one "event". I can live with that most of the time, but in several instances I split events. Unfortunately, the dates of the original, unsplit event do not update automatically. This often results in a wrong order of events. If, e.g. I take out pictures from August 10th from an event with photo dates August 10th to August 13th, the original event still shows the starting date of August 10th, and orders the event between August 9th and August 11th.
The expected behaviour would be that the starting date of the modified event would change automatically to reflect the changes. This does not occur, and, worse, there is not even a possibility to change those dates manually.
Am I missing something important here, or is this an VERY annoying bug in iPhoto08?I agree - but this is a user forum and we can NOT fix anything - only try to help either follow the correct procedures of (as in this case) identify a work around to use until Apple fixes the problem.
As far as I know the work around of creating a new event form one photo and moving the remaining photos to the new event is the ONLY way arround this problem right now.
Using the work around will accomplish what you need even though it should not be necessary. Complaining about on this forum will not accomplish anything - compalining directly to Apple might -- iPhoto menu ==> Provide iPhoto Feedback.
Larry Nebel
PS - and reading the thread prior to get the work around prior to adding "I have the same problem" would actually be a pretty good idea too! -
I reinstalled iPhoto but events did not update
I reinstalled iPhoto because I didn't like the photos app. When I did, the events did not update--the last one was April 12. I downloaded my photo stream, thinking that that would get me my most current events, but I just have a mess of photos. How can I get events to recognize everything after April 12?
Details needed
1 - what exactly did you do? There is no need to reinstall iPhoto as it is no removed by the OS upgrade - you just launch it form the LaunchPad or the application s folder and use it as before
2 - what updates did you expect? If you have imported photos into the Photos application then iPhoto knows nothing about them - you have to import them to iPhoto too
3 - Nothing has changed with PhotoStream what exactly are you seeing?
LN -
Is it right that GCs returned from GC start/finish events are not Full GC i
We have noticed that all those GCs returned from GC start/finish events are not only Full GCs (which are stop world GC specified as in JVMTI spec if I understand it correctly) in JVMTI. It is not like in JVMPI. Is it a right behavior? Should only stop world GCs be reported by GC start/finish events per JVMTI spec?
For example:
GarbageCollectionStart...
[GC 1719K->1304K(1984K), 0.0003732 secs]
GarbageCollectionFinish...
post-GarbageCollectionFinish actions...
GarbageCollectionStart...
[GC 1771K->1351K(1984K), 0.0003081 secs]
GarbageCollectionFinish...
post-GarbageCollectionFinish actions...
GarbageCollectionStart...
[GC 1823K->1446K(1984K), 0.0003593 secs]
[Full GC 1446K->277K(1984K), 0.0127902 secs]
GarbageCollectionFinish...
GarbageCollectionStart...
[GC 754K->420K(1984K), 0.0003827 secs]
GarbageCollectionFinish...........
Thanks,
ChongUse the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
For some reason my events are not in chronological order. If I go to photos, they are, but in events there are some from August stuck in between events in December, and then many events are missing, which again, still exist under photos..
View Menu -> Sort Events...
-
My Iphone calendar events are not showing up in iCal when I sync? Syncing has not been an issue till today?
I found this tip from a 2011 discussion on the same topic.
Open iCal and backup or export your entries. Make a note of the fie name and location, you're going to need them in a minute. Once your backup/export is completed, close the iCal application.
Open Finder and remove everything inside the "Username/Library/Calendars" folder. For instance, if your username is "Joe", then move everything inside the "Joe/Library/Calendars" folder.
Open the iSync application. It's located in the "/Applications/" folder. Once iSync is opened, go into the iSync Preferences (iSync -> Preferences) and push/click the "Reset Sync History" button. Then, close the iSync application.
Re-Open the iCal application and Import (File -> Import) a new calendar. When prompted, use your notes from Step #1 to select the file your created earlier. Once completed, close the iCal application (you should have all of your calendar entries back.)
Open the iTunes application and connect your Apple iPhone to the computer.
Within the Advanced section of the Info tab for the Apple iPhone, check the box the overwrites/replaces the Calendar data on the Apple iPhone.
Click the Apple/Sync button. New, modified and deleted entries should now be syncing correctly.
That's it! You should be all set and iTunes, iCal and our Apple iPhone should all be playing nicely as friends again. We've used the exact method to repair our own Apple iPhone at least once... maybe even twice. -
New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]] -
My iphone contacts are not updating to Icloud or Outlook, I can create a contact in Icloud/Outlook and it will update to my Iphone but I cannot create a contact on my Iphone to have it update in the Cloud/Outlook, I am using Itunes as the bridge. I originally installed the Icloud manager to sync my contacts to Cloud/Outlook, but I did not like the functionality, when I uninstalled the Cloud manager and and installed Itunes I noticed that the none of my contacts in the phone updated to Outlook.
Thanks in advance.Hi Cyclops12,
Welcome to the Support Communities!
The article below may be able to help you with this.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
Cheers,
- Judy -
My apps are not updating as I have no longer access to my eariler apple Id and now I am using a new apple Id which is allowing to download apps but while updating those apps my iPod wants eariler apple Id password to update what should I do ?
Hi Kanishk,
Those apps are forever tied to the Apple ID they were purchased under. You can either delete them and re-purchase them, or you can go to Manage your Apple ID and reset the password on the old Apple ID so you can use it to update your apps: Apple - My Apple ID
If you decide to continue to use them under the old ID password, I would suggest that when you reset that password, you change it to be the same password as the one you are currently using. That way when apps need to be updated you will only need to know one password and you won't have to be concerned with which Apple ID is displaying.
Cheers,
GB -
Qty and value in PO list are not updated (after a Service Entry)
Hi Experts,
Qty and value still to be delivered in the ME2L are not updated:
I have performed a service entry (ML81N) but qty and value are not updated in the list of the PO in the ME2L.
Could anyone explain?
Many thanks in advance.
Regards,
CesarThanks for quick reply.
I do not configure anything in SPRO (Define release strategy for SES) but I got a red light in the top of the screen near the field "No acceptance" so I presume that the SES should be accepted but as I do not configure anything regarding release startegy, I do not know how to accept the SES.
Besides, I cannot perform MIRO: when I put the PO number, system indicates that there is no (suitable) item found for PO
I should have miss something. Could you please guide me?
Thanks,
Cesar -
Problem in pricing conditions are not updated in BAPI_SAG_CHANGE
Hallo Friends,
we have faced the one problem with the standard bapi *BAPI_SAG_CHANGE.
we have passed the 10 item level data to the BAPI_SAG_CHANGE , the bapi BAPI_SAG_CHANGE successfully updated the 10 item level data to the schedule agreement .
the problem is pircing condtions are not updated succesfully for the each items in the schedule agreement.
please suggest the good solution.
thanks
kumarHi jons,
Thanks for respoding my request, Please find my below code lines
CALL FUNCTION 'BAPI_SAG_CHANGE'
EXPORTING
purchasingdocument = st_header-number
header = st_header
headerx = st_headerx
VENDOR_ADDRESS =
HEAD_EXPORT_IMPORT =
HEAD_EXPORT_IMPORTX =
TESTRUN =
TECHNICAL_DATA =
IMPORTING
EXP_HEADER =
EXP_HEAD_EXPORT_IMPORT =
TABLES
return = st_return
Begin of modify by kirankumar 07/12/2009
item = st_item
item = st_item[]
End of modify by kirankumar 07/12/2009
itemx = st_itemx[]
account = st_account
accountprofitsegment = st_accountprofitsegment
accountx = st_accountx
schedule = st_schedule
schedulex = st_schedulex
sc_component = st_sc_component
sc_componentx = st_sc_componentx
shipping = st_shipping[]
shippingx = st_shippingx[]
shipping_exp = st_shipping_exp
delivery_address = st_delivery_address
item_cond_validity = st_item_cond_validity[]
item_cond_validityx = st_item_cond_validityx[]
item_condition = st_item_condition[]
item_conditionx = st_item_conditionx[]
item_cond_scale_value = st_item_cond_scale_value
item_cond_scale_quan = st_item_cond_scale_quan
export_import = st_export_import
export_importx = st_export_importx
item_text = st_item_text
header_text = st_header_text
head_cond_validity = st_head_cond_validity
head_cond_validityx = st_head_cond_validityx
head_condition = st_head_condition
head_conditionx = st_head_conditionx
head_cond_scale_val = st_head_cond_scale_val
head_cond_scale_quan = st_head_cond_scale_quan
partner = st_partner[]
partnerx = st_partnerx[]
extensionin = st_extensionin
extensionout = st_extensionout.
Maybe you are looking for
-
I had to reformat my hard drive on my pc...have a backup now of my music on my PC....my question is how do I get the music into I tunes and have I tunes recognize my ipod now when I connect it to my pc so that it syncs automatically Thanks
-
MWA: Issue while capturing the values entered, before displaying the LOV
I have created a LOV in Mobile Web Application using PL/SQL procedure. I'm not able to get the values entered by the user before displaying the List of values. I need the values entered to pass it to the query. There might be a seeded event or method
-
We recently bought 3 new Intel Core Duo running 10.4.8 but we have to downgrade to 10.4.7 since our POS manufacturer informs us that there are some issues with 10.4.8. The downgrade seems okay but when we try to change the date in the Point of Sale s
-
Paint Shop Pro instead of Photoshop
I am much more comfortable using Paint Shop Pro. Is there a way to get Encore CS3 to open Paint Shop Pro instead of Photoshop to edit menus, etc.?
-
Hello, I was just wondering if anyone knows of a way to transpose from one table to another, but in a slightly different order At the moment I have a long vertical table A B C D E F I want to transpose this to a horizontal table, however I want to sp