Ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over

ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over again why can't the techs at apple fix this defective program??????????????

Similar Messages

IPod touch Battery Problems Since iOS 7 was installed last year.

Hello, I've had recurring battery problems with my iPod touch since the iOS 7 update was installed, and I find myself having to charge my iPod touch (5th Generation) a lot more frequently since I installed this update.
On iOS 6, I had never experienced any problems with the iPod touch's battery, as I was able to let the battery drain down completely, and let it charge for 4 hours (recommended). After the iPod touch was fully charged for 4 whole hours, I was able to unplug the lightning cable, and the iPod touch on its own would last a few days to at least a week or two weeks.
On iOS 7, since it saw its general release on the 18th September last year, I have found that the iPod's battery has drained so bad, that it dies too quickly, and when I put the iPod touch on charge, in almost an hour, the iPod touch tells me that it is 100% charged. However, when I take the iPod touch off its charge after it fully charges for that hour, it quickly drains down again.
I have gone through the standard procedure of restoring my iPod touch to its factory settings, and I have seen absolutely no improvement on the battery life whatsoever. I mainly back up whatever is on my iPod touch (I back up pictures, videos and also transfer updates that I have installed for certain apps onto iTunes), though I have seen how some people have backed up the data on their iPod's or iPhones, only they find their iDevice draining so quickly.
Even turning off certain features in the Settings app to improve the battery life doesn't help, as there is almost no difference that solves the problems I'm currently having with the iPod touch's battery.
I recently heard about the free iPhone battery replacement program which is now available, so I'm starting to worry whether I have to pay for a new replacement battery for my iPod touch.
Your help in this matter would be gratefully appreciated.
Many kind regards,
Alex Smithson
Message was edited by: Alex169853

I mainly charge the iPod touch itself for four hours and it still doesn't make a difference. I've had my iPod touch for almost 2 years and since I installed iOS 7, it still doesn't make a difference.
I was wondering, if the article you have provided doesn't sort the problems with the battery out, is there another alternative??
Your help and advice is most appreciated.
Many kind regards,
Alex Smithson

IPad 2 HDMI output no longer works since iOS 6 was installed

Hi everyone,
I need some help here,
I have a pretty old HD TV equipped with HDMI input ports, I was able to use my iPad 2 to do Video mirroring or anything else for that matter while the iPad 2 was operation with iOS 5.1.1, since I upgraded to the iOS 6 I'm no longer able to see the ipad home screen or videos like, Netflix, YouTube, basically anything my ipad was displaying, not my TV doesn't even detects a signal.
Are there any useful information that yous can share, I'm going crazy here as my two young kids want to watch their favorite show on Netflix through the big TV.
This has caused some discomfort and I wish I can find some help to fix it.
I appreciate your help.

I have an ipad 2 running ios 6.0.1 and an older Dell TV (1080i) and have always been able to mirror. Running ios 5 the mirroring worked perfectly for sound and video. Don't remember if I tried while running 5.1. Now that I have 6.0.1, I can still mirror, but the whole screen is pink on this Dell TV. When I make the connection from ipad to the tv, mirroring starts immediately and the notification bar on the ipad home screen pulsates from blue to black and the cable is detected. I have sound and video working fine except for the colors. The ipad detects the AV Composite cable under settings>about but there is no TV out setting under General Settings where I'm supposed to see TV OUT listed under iTunes Wi-Fi sync. I have changed the hdmi to a new one, but it didn't help. I also have a new Panasonic Viera tv and everything (with the same cables) works perfectly on that TV. Leads me to believe it's an issue with the TV OUT function of the ipad. I don't know if any of this is helfpul information, but I thought it might help you narrow down what is going on with your setup.

I cannot attach photos to email since iOS 8 was installed yesterday.

Since I installed iOS 8 yesterday, I can no longer attach photos to email. It just cycles and cycles but photos will not attach. PLEASE HELP!! Thank you!!!!

Hello DaynaE65,
After reviewing your post, I have located an article that can help in this situation. You may want to consider performing a restart, or a reset to address the issue:
Turn your iOS device off and on (restart) and reset
How to restart
Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities
Cheers,
BobbyD

My Ipod was originally set up as a sub-account of a firends. After that, I got an Iphone and set up my own Apple account. I just got a new Ipod, and now can't sync my old Itunes to it. Can anyone help me? I'm even OK with deleting the old Itunes account

My Ipod was originally set up as a sub-account of a firends. After that, I got an Iphone and set up my own Apple account. I just got a new Ipod, and now can't sync my old Itunes to it. Can anyone help me? I'm even OK with deleting the old Itunes account, and staring over. I just really want to get the new Ipod under my own account, and be able to use it...

There is no such thing as a "sub-account." Also, you probably mean iTunes library, when you say "account." Your "account" in iTunes is your Apple ID, which is what you use to sign in to the iTunes Store to make purchases. iPods are associated with an iTunes library, not with an Apple ID (iTunes Store account). You'll need to clarify...
So, this is what I think you are saying. You previously shared an iTunes library on a computer with your friend. Your old iPod was synced to that iTunes library.
You got an iPhone, and at that time, you set up your own iTunes library. Is that on a different computer? How does the iPhone affect your question about the iPod?
You got a new iPod. What is your "old iTunes"? Is that the iTunes library you shared with your friend?

Problem in deleting the message after reading

Hi
I m having some problem to delete the message after reading.
i read the FAQ, and there is only one question regarding to delete that i have tried but its not working
As my application required that message should be deleted after the processing.
Please help me out asap
Thank in advance.

now here is the protocol trace from starting to the end point
with the settings of
session.setDebug(true);
and
folder.close(true);
POP3: connecting to host "172.xx.xx.xx", port 110
S: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.6944.0 (xxxxx.xyz.com) ready.
C: USER test1
S: +OK
C: PASS Password
S: +OK User successfully logged on.
C: STAT
S: +OK 1 548
Total messages = 1
New messages = 0
================================
C: TOP 1 0
S: +OK
Received: from yyyyyy ([172.xx.xx.xx]) by xxxxx.xyz.com with Microsoft SMTPSVC(6.0.3790.3959);
     Thu, 11 Sep 2008 12:21:14 +0530
Message-ID: <3373112.1221115884647.JavaMail.284528@yyyyyy>
From: [email protected]
To: [email protected]
Subject: testing
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Return-Path: [email protected]
X-OriginalArrivalTime: 11 Sep 2008 06:51:14.0500 (UTC) FILETIME=[C8892840:01C913DA]
Date: 11 Sep 2008 12:21:14 +0530
C: LIST 1
S: +OK 1 548
------------STARTING LINE------------
MESSAGE #1:
From: [email protected]
To: [email protected]
Subject: testing
SendDate: Thu Sep 11 12:21:14 IST 2008
CONTENT-TYPE: text/plain
This is plain text
------------TEXT------------
C: RETR 1
S: +OK
Received: from yyyyyy ([172.xx.xx.xx]) by xxxxx.xyz.com with Microsoft SMTPSVC(6.0.3790.3959);
     Thu, 11 Sep 2008 12:21:14 +0530
Message-ID: <3373112.1221115884647.JavaMail.284528@yyyyyy>
From: [email protected]
To: [email protected]
Subject: testing
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Return-Path: [email protected]
X-OriginalArrivalTime: 11 Sep 2008 06:51:14.0500 (UTC) FILETIME=[C8892840:01C913DA]
Date: 11 Sep 2008 12:21:14 +0530
------------TEXT------------
******************MESSAGE ENDING LINE*****************
C: QUIT
S: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.6944.0 signing off.

HT1222 Ipad2 losses cell connection now that iOS 8 was installed. Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!

Ipad2 losses cell connection now that iOS 8 was installed. Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!

Hey everyone-
Im in the same boat, started a thread . My hands free system worked fine with iOS 8 out of the box new iphone 6. Did the update this morning and i can stream music perfectly fine however i cannot make or receive calls through hands free system.
I have not tried resetting the settings like most people indicate is working. I feel like I shouldn't have to reset anything, even less mess with settings with an update coming from apple. it should "Just Work"
Some people who reset said it works for a few hours, other say it don't work, and I don't know what I should do.
Car: Hyundai Sonata 2014
NOTE: I was able to replicate the issue in my wifes Hyunday Elentra 2013.
This is how I know its not a defect with the BT in my car.

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

I know what your'e going through, Gary.   OSX 10.6.7 is an absolute disaster.   Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
Before 10.6.7 my system was running fine.
I've brought this up with Apple repeatedly.   They smile and shrug.   They've been helpful resolving the issues, but none of them has been easy to solve. I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.
I wish I could give you an answer to your question.   My only guess is that Apple has totally dropped the ball on this one.   In the future they should provide a disclaimer when they offer an upgrade. Something like:   "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work.   This is especially disturbing when you depend upon their system to make your living.
Good luck.
david

I don't have back up since last august but I accidentally delete the message recently. How can I undo that mess back ?

I don't have back up since last august but I accidentally delete the message recently. How can I undo that message back ?

If you haven't backed up to either your computer or iCloud, you can't get the message back. Let this be a lesson to either back your phone up to your computer or to iCloud (or both) regularly.

HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.

Make sure you quit all your applications before shutting down.
And try resetting the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)

I have a new iPod and soon as I turned it on, it wanted me to upgrade it to the new IOS 6.0.1. Ever since then, my imessages won't work. I've reset it and everything and it still doesn't. So why won't it work?

I have a new iPod and soon as I turned it on, it wanted me to upgrade it to the new IOS 6.0.1. Ever since then, my imessages won't work. I've reset it and everything and it still doesn't. So why won't it work?

Without knowing what happens when you try:
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages

How to revert back the deleted the message varient in Process chain

Hi All,
By mistake i have deleted the message varient for one loading infopackage process in one process chain in production.
These chain was not in dev and quality. I need to know this message and to whom they were sending this message.
Is there any way to know revert back the message details ?

Hi Dennis,
It was physically deleted.
I will explain in more detail :
i have one process chain which has 4 info packages in parellel, after these info packages there is END process which combines all info packages.In this END process there was a Message which used to send mails to business users.
Today i have removed the END process by mistkenly. I dont know what was the message and who are the recepitents.
It has happend in production and we dont have any back up.
Now i want know the what was message and to whom this message was used to send.
Thanks in advance

How to delete the messages in the purges folder?

if the mailbox is enabled the single item recovery, then the messages would move from deletion folder to the purges folder After running the following script,
Search-Mailbox dave -searchdumpsteronly
-deletecontent
so my question is how to delete the messages in the purges folder with some script or retention policy?
Please click the Mark as Answer button if a post solves your problem!

Thank you all,
As the mailbox is enabled single item recovery.
I just want to make the items neither in deletion folder, nor in purges folder.
So I think there are two ways to achieve this.
Method 1,disabled the single item recovery. then delete the items in deletion folder ,so it wouldn't enter to the purges folder, it just deleted permanently. then enable the single item recovery
Method 2,delete the items in deletion folder,then the messages move to the purges folder, then delete the messages in purges folder.
the Method 1 is not so good ,as it need to disable the single item recovery firstly, then enable single item recovery .
So I want to use the Method 2
Please click the Mark as Answer button if a post solves your problem!

Unable to delete the messages in PI

Hi Experts
We are planning to delete the messages in PI. So I have specified the retention period and started the deletion jobs
1. SAP_BC_XMB_DELETE_<client> (Deletion job for XML messages)
2. SAP_BC_XMB_HIST_DELETE_<client> (Deletion job for history entries)
But when i scheduleted the jobs I am getting the a error message
Job started
Step 001 started (program RSXMB_DELETE_MESSAGES, variant &0000000000001, user ID XXXXXXX)
Table container currently being copied; no other a
Job cancelled after system exception ERROR_MESSAGE
Job started
Step 001 started (program RSXMB_DELETE_HISTORY, variant &0000000000001, user ID XXXXXXXX
0 XML messages deleted
Job finished
Can you please help me to resolve the issue
Thanks & Regards
Anand

hi,
Just deregister and re reigster your queues once again,
<b>SXMB_ADM -> Manage Queues -> Register the Queues.</b>You can restart the messages manually.
But, this problem is beacuse of the load and so would suggest tuning of your XI server.
Check this document for the same,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7fdca26e-0601-0010-369d-b3fc87d3a2d9
Regards,
Bhavesh

Ever since iOS 7 was installed on my phone it keeps fetching all and any e-mail from my server and it is taking up tp as much as 2.5 GB even after I delete the messages! Now after a complete wipe and restore it is happening all over

Similar Messages

Maybe you are looking for